Firefighters Protective Clothing consist of several layers of different properties and functions. The layers create barriers against dangerous outer factor. However, they are also barriers to transport of sweat produced by human organism. It causes that very often sweat in the form of vapor is not transferred effectively from the human organism through the FPC to environment. This leads to sweat condensation on the skin of the FPC user causing his discomfort. In order to ensure as good as possible physiological comfort of firefighter while firefighting and other rescue actions it is necessary to take into consideration the transport of condensed sweat in the multilayer textile set creating the FPC. In the presented work four variants of multilayer textile sets for the FPC have been tested in the aspect of liquid moisture transport. Measurement was performed by means of the Moisture Management Tester (MMT290) – innovative instrument manufactured by the SDL Atlas. Obtained results showed that the transfer of sweat in liquid form occurs only in the inner, next to skin layer of the multilayer sets for the FPC.

Aloe vera is well known for its biological properties as a bioflavonoid-anti-inflammatory, antibacterial agent. It has been used frequently in the food sector as food coating for its hygroscopic properties and as an ingredient in the lucrative industry. Studies have also included Aloe vera as an eco-friendly green solution based on these properties. The current research focuses on the use of Aloe vera gel in printing pastes as an alternative sustainable solution to synthetic thickeners, evaluating its wet performance and ease of fabric stitching, and has been inspired by studies that similarly used this substance measuring its effect on the fabric's coefficient of friction and antimicrobial action. In the current study, printing pastes with natural colourants and Aloe vera gel thickener derived from natural leaves from Crete increased the fabric's mechanical resistance to abrasion compared to the untreated pastes. The measured performance did not differ substantially from prints with traditional synthetic pastes, hence tolerating the substitution with the non-contaminant variant. The enhanced resistance to abrasion and wear prolongates the fabric's serviceable life and resulting garments, decreasing the need for high industry processing volumes and, as a result, reducing pollution. The resistance to wear was evaluated using the dominant method in textile testing of the Martindale apparatus, which measured the cycles to failure, weight loss, and general appearance deterioration using the official photographic standards.

The graphene based highly conductive and flexible devices has received momentous attraction and growth in recent years for potential multifunctional uses. The development of flexible and washable textile sensors, actuators, energy storage and energy harvesting systems. Textile fabrics coated with graphene and conductive polymers have been used for wearable self-powered e-textiles, such as tribo-electric, piezoelectric, and Thermoelectric. Herein this research, 100% woven cotton fabric is Fictionalized with graphene oxide (GO) using industrial-scale cold pad batch dyeing technique for the development of low-grade body heat into self-powered wearable e-textiles. The conductive polymer PEDOT: PSS was coated using layer by layer approach. The study demonstrates that the resultant textile electrodes showed reduced electrical sheet resistance from 2.5 MΩ to 15KΩ, with a reduced graphene oxide and further reduced to (2.5 -12.5 Ω) for conductive polymer. The sheet resistance was decreased with the number of dyeing cycles (10-15) and increased with 20 washing cycles vice versa. The study demonstrates that the sensor response and performance were improved with increasing the content percent of rGO and PEDOT: PSS. The tensile strength of as coated fabric electrodes was improved from (25.0-85.5 mPa) and fabric thickness was increased to (26-38µm) without compromising or influencing the air permeability. The resultant textile electrodes may potentially be used in smart textiles for self-powered flexible wearable generators, sensors, and energy storage. The study demonstrates that the cold pad batch dyeing method is a suitable and effective method for the fabrication of graphene-based textiles.

The Textile and Clothing (T\&C) value chain is one of the most polluting in the world and one that produces the most waste. It is, therefore, important to encourage the Circular Economy (CE) model in this sector, to reduce pollution and mitigate the effects of waste production, and consequently increase environmental sustainability. For that, the involvement of the final consumer is essential. And, the final consumer's use of an Eco-gamified application for registering and promoting Consumer-to-Consumer (C2C) and Consumer-to-Business (C2B) activities, which extends the life time of textile products, is of utmost importance. In this article, we survey gamification frameworks for analyzing system design level techniques that enable engaging the final consumer in the CE process. Then, we select and use one of such frameworks, Gameful Design Heuristics (GDH), for defining the gamification structure needed to implement on a Business-to-Consumer-to-Consumer (B2C2C) context of a circular economy. As result, we present a B2C2C circular business process model for the T\&C value chain, and propose the design model of a gamified platform for the final consumers, which allows them to register the C2B and C2C activities, from the circular value chain's business process, and benefit from a game-like experience. All model features have been mapped to GDH framework heuristics, validating that it is possible to support a set of defined heuristics of applied gamification for promoting CE in the T\&C value chain.

Non-invasive continuous health monitoring has become feasible with the advancement of biosensors. While monitoring certain biomarkers such as heart rate or skin temperature are now at certain maturity, monitoring molecular biomarkers is still challenging. Progress has been shown in sampling, measurement and interpretation of data towards non-invasive molecular sensors that can be integrated in daily wearable items. Towards this goal, this paper explores the potential of embroidered interdigitated transducer (IDT)-based sensors for non-invasive, continuous monitoring of human biomarkers, particularly glucose levels, in human sweat. The study employs innovative embroidery techniques to create flexible fabric-based sensors with gold-coated IDTs. In controlled experiments, we have shown the variation of glucose concentration in water can be wirelessly detected by tracking the resonant frequency of the embroidered sensors. The current sensors operate at 1.8GHz–2GHz and respond to the change of glucose concentration with a sensitivity of 0.17 MHz/(mg/dl). The embroidered IDT-based sensors with wireless sensing will be a new measurement modality for molecular wearable sensors. The establishment of a wireless sensing mechanism for embroidered IDT-based sensors will be followed by investigation of sweat for molecular detection. This will require adding functionalities for sampling and interpretation of acquired data. We envisage the embroidered IDT-based sensors offer a unique approach for seamless integration into clothing, paving the way for personalised, continuous health data capture.

Citrus waste has been used as a source of bioplastic research in different ways. Because the juice industry produces significant amounts of residue each year, it would be advantageous to use the byproducts in the creation of new materials. For many years, researchers have been investigating an environmentally friendly way to take citrus and other organic waste and turn it into polymers that may be used, for instance, to produce bio-based and biodegradable films for food packaging. The goal of this study is to create biofilms from orange (OW) and ginger waste (GW) using an ultrafine grinder and study the films' properties. Since pectin has the ability to gel and because cellulosic fibres are strong, citrus waste has been studied for its potential to produce biofilms. After being washed, dried, and milled, orange and ginger waste were shaped into films using a casting process. Tensile testing was used to determine the mechanical properties of biofilms, while dynamic mechanical thermal analysis (DMTA), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) were used to determine their thermal properties. As the number of grinding cycles increased, the suspension's viscosity increased from 29 to 57 mPa.s for OW and from 217 to 376 mPa.s for GW while the particle size in the suspension significantly decreased. For OW and GW films, the highest tensile strength was 17 MPa and 15 MPa, respectively. The maximum strain obtained among all films was 4.8%. All the tested films were stable up to 150°C, and maximum degradation occurs after 300°C.

Banks have enormous potential in supporting the achievement of sustainable development goals (SDGs) in accordance with their function as financial intermediaries through sustainable lending. However, the average national financing growth for the sustainable business activity category over the past four years is still 12%. The aim of this research is to identify the conditions of sustainable lending at state-owned conventional banks and analyze the influence of the value chain, economic performance and ESG performance on sustainable lending. The research was conducted at state-owned commercial banks in Indonesia. The research utilized a Structural Equation Modeling (SEM). The SEM results of this study describe value chain, ESG performance (environmental, social and governance) and economic performance have direct and positive influences on sustainable lending, of which ESG performance has the biggest influence. As per individual aspect, social orientation gives the biggest contribution toward sustainable lending.

Textile and clothing is one of the most important industrial sectors, not only due to the significant number of jobs generated, but also because it addresses one of the people’s fundamental needs (clothing). It is, however, a sector with a huge environmental impact, all over the world, and also an important social impact, especially in developing countries. Sustainability in the Textile & Clothing value chain is a known issue, concerning both environmental, and economical-social facets of sustainability. One way to improve sustainability in this sector is by measuring the environmental, economic and social impacts of value chain activities and, ultimately, computing an Environmental and Circular score for each batch of textile and clothing product, and an Economical and Social score for each involved firm, reflected in their products. The consumer will then have the opportunity and responsibility for selecting products with the least negative environmental, economical and social impact. This article presents the results of STVgoDigital project - PPS1, developed in Portugal with the aim of implementing the traceability of textile and clothing products, boosting sustainability in this sector, and preparing the ground for the implementation of the circular economy. More exactly, a blockchain-based textile and clothing value-chain traceability platform is presented, for tracing textile product lots and activities, along the value chain, classifying them with a score, which measures their environmental and social impact. The environmental, economic and social impact scores are based on a set of proposed indicators. The results are assessed through the presentation of a case study of a face towel (home textile) and a case study of a T-shirt (clothing).

The last-mile logistics in cities have become an indispensable part of the urban logistics system. This study aims to explore the effective selection of last-mile logistics nodes to enhance the efficiency of logistics distribution, strengthen the corporate distribution image, and further reduce corporate operating costs and alleviate urban traffic congestion. This paper proposes a clustering-based approach to identify urban logistics nodes from the perspective of geographic information fusion. This method comprehensively considers several key indicators, including the coverage, balance, and urban traffic conditions of logistics distribution. Additionally, we employed a greedy algorithm to identify secondary nodes around primary nodes, thus constructing an effective nodal network. To verify the practicality of this model, we conducted an empirical simulation study using the logistics demand and traffic conditions in the Xianlin District of Nanjing. This research not only identified the locations of primary and secondary logistics nodes but also provided a new perspective for constructing the urban last-mile logistics system, enriching the academic research related to logistics node construction. The results of this study are of significant theoretical and practical importance for optimizing urban logistics networks, enhancing logistics efficiency, and promoting the improvement of urban traffic conditions.

The rapid growth of the global wearable technologies market is projected to reach $61.30 billion by 2030 which reflects a shift towards personalised health monitoring embedded in everyday activities. This paper explores the potential of embroidered interdigitated transducer (IDT)-based sensors for non-invasive, continuous monitoring of human biomarkers, particularly glucose levels, in human sweat. The study employs innovative embroidery techniques to create flexible fabric-based sensors with gold-coated IDTs. Experimental results demonstrate the sensor’s capability to detect water droplets and glucose concentrations, showcasing promising applications for health monitoring. The embroidered IDT-based sensors offer a unique approach for seamless integration into clothing, paving the way for personalised, continuous health data capture.

Lactoperoxidase system (LPS) effect on quality of raw and pasteurized milk under real conditions along the dairy value chain in Ethiopia was evaluated. A total of 250 milk samples were collected from farmers, collectors, and factories. Experimental samples were LPS-activated of morning and overnight milk. The samples were tested with several chemical and microbiological tests such as total bacterial count (TBC), total coliform count (TCC) and Escherichia coli count (EC). Results indicated that all LPS-activated milk samples had a higher quality than all the control samples. For instance, both the morning and overnight farm milk samples had a mean TBCs of 5.79 log and 6.55 log cfu/ml which is significantly (p

The European Union Water Framework Directive (2000/60/EC; WFD) aims to achieve a good ecological and chemical status of all bodies of surface water by 2027. The development of an integrated guidance on surface water chemical monitoring (e.g. WFD Guidance Document No. 7/19) has been transferred into national German law (Ordinance for the Protection of Surface Waters, OGewV). For the majority of compounds, this act requires a monthly sampling frequency to assess the chemical water quality status of a surface water body. To evaluate the representativeness of the sampling strategy under the OGewV, high-frequency online monitoring data is investigated under different sampling scenarios and compared with current, monthly grab sampling strategy. About 23 million data points were analyzed for this study, three chemical parameters (dissolved oxygen, nitrate-nitrogen, chloride concentration) and discharge data were selected from four catchment of different sizes ranging from 51391 km² to 84 km² (Elbe, Vereinigte Mulde, Neiße and two stations at Lockwitzbach). In this paper we proposed short-term online-monitoring (STOM) as a sampling alternative. STOM considers the placement of online sensors over a limited duration and return interval. In general we: (I) compare the results of conventional grab sampling with STOM, (II) investigate the different performance of STOM and grab sampling using discharge data as proxy for analyzing event-mobilized pollutants and (III) investigate the related uncertainties and costs of both sampling methods. Results show, that STOM outperforms grab sampling for parameters where minimum/maximum concentrations are required by law as the probability to catch a single extreme value is higher with STOM. Furthermore, parameters showing a pronounced diurnal pattern, like dissolved oxygen, are also captured considerably better. The performance of STOM showed no substantial improvements for parameters with small concentration variability, as nitrogen-nitrate The analysis of discharge events as a proxy parameter for event-mobilized pollutants proved that the probability of capturing samples during events is significantly increased by STOM.

Porcine parvovirus 8 (PPV8), a novel virus in the Parvoviridae family, was first identified in 2022 in lung samples of domestic pigs from China. Retrospective analyses showed that it had been circulating in China since 1998, but no other countries had reported its presence so far. A recent study conducted in South America did not detect any PPV8-positive samples in that region. Here we report the detection of PPV8 in Hungarian and Slovakian pig farms and the estimated prevalence of the virus in Hungary. Altogether 2230 serum, 233 oral fluid, and 115 processing fluid samples were systematically collected from 23 Hungarian and 2 Slovakian pig farms between 2020 and 2023. A real-time quantitative PCR method was developed to detect the viral genome. Our results revealed the presence of PPV8 on 65% of the Hungarian farms and on both Slovakian farms included in our study, marking its first detection in Europe. Oral fluid samples showed the highest positivity rates, reaching up to 100% in some herds. The viral genome was successfully detected in serum and processing fluid samples too, but with significantly lower prevalence rates of 4% and 5%, respectively. Genetic analysis of 11 partial VP2 sequences demonstrated high similarity to the original Chinese strain but with unique amino acid mutations, suggesting possible local evolution of the virus. Our study presents the first scientific evidence of PPV8 infection outside of China and offers a comprehensive assessment of its prevalence in the Hungarian pig population. Further research is required to understand its potential impact on swine health.

The development of ballistic protection vests (BPVs) has become increasingly significant, particularly in the design of soft panels, which are critical to the overall size and configuration of these vests. Despite their importance, a standardized design process for soft panels is lacking in the literature. This research addresses this gap by creating soft panels tailored to the body types of regional soldiers while adhering to relevant standards. We propose a comprehensive design algorithm and evaluate the applicability of the National Institute of Justice (NIJ) standard 0101.06 test templates for configuring these panels. This study aims to design soft ballistic panels for BPVs that cater to the body type requirements of regional soldiers and comply with NIJ 0101.06 standards. We have developed an algorithm for designing soft panels and analyzed the feasibility of using NIJ test templates for their configuration. The research encompasses a detailed literature review, analysis of existing BPV soft panels, and comparison with NIJ test templates. The panels were designed and scaled using computer-aided design (CAD) systems and evaluated through by physical fitting on mannequins and virtual fitting using the Clo3D program. Our findings indicate that the NIJ standard test templates are only partially applicable to the design of soft panels. The developed methodology includes an algorithm and size specifications tailored to regional covers. A coefficient (K) was identified to calculate the soft panel surface area prior to design, thereby saving time and resources.

Procurement plays a central and defining role in the efficiency of supply chains. In recent years, the understanding and practice of procurement management have changed significantly due to increasing emphasis on and demand for agility and sustainability within supply chain management systems. Meanwhile, traditional supply chain systems, characterized by siloed processes, limited visibility, and inefficiencies due to manual interventions, can no longer cope with the current dynamic market conditions. Besides, the increasing requirements of sustainability, ethical sourcing, and environmental impact have intensified, making more responsible, transparent, and traceable procurement practices unnegotiable requirements for modern systems. In this paper, we examine the potential of emerging technologies and innovations such as blockchain, artificial intelligence, and the Internet of Things (IoT) in filling these gaps within the supply chain systems of enterprises in the US. The study employs a comprehensive review of relevant literature and case studies to discover and provide insights on how these technologies can improve procurement processes, optimize resource allocation and utilization, and improve sustainability. The findings of this study highlight the need for stakeholders to embrace technological advancements to effectively navigate the dynamic landscape of supply chain management.

The textile sector is responsible for a number of environmental impacts. Due to the in-creasing quantities of textiles, their share is rising and a trend reversal from a linear to a circular textile chain is needed. This article presents the background, methodological approach and results of a participatory textile development model. In the commercial B2B sector, three textile prototypes were developed together with users and trialled over several months in three application areas. Textile development took into account the requirements of fibre regeneration in the product design and focused on innova-tive chemical recycling solutions. The three sustainably aligned textiles were subject-ed to spectroscopic and textile-technological tests. Screening life cycle assessments an-alysed their environmental profile and compared it with reference textiles that are used as standard. Overall, it is clear that the three textiles can match conventional ref-erence textiles in terms of quality and have considerable environmental benefits com-pared to the reference textiles. The user survey did identify concerns about a high arti-ficial fibre content, although a general rejection of recycled fibres was not observed. The results show that a transformation is possible, but must start with the fibre com-position; recycling, on the other hand, is of minor importance.

The development of the chicken value chain in The Gambia has immense potentials to lead to the modernisation of agriculture and creating employment for young people and women. Chicken can be raised throughout the year in most parts of The Gambia. With increasing populations, environmental degradation and loss of rangelands, chicken is easier to producer than other livestock, such as cattle and small ruminants. The development of the chicken value chain in The Gambia is also mainly constrained at commercialisation. Commercial farmers in The Gambia are not able to compete with cheap import. Critical inputs such as day-old chicks and feed are imported. Most farms are operating below 40% capacity and only less than 4% utilisation of the available processing capacity. At full capacity and with some needed investments along the value chain, The Gambia has the capacity to meet the demand for chicken and eggs. 88% of the value chain actors believe that the imposition of tariffs on chicken imports will lead to the upward transformation of the chicken value chain being able to employ at least 10% of the Gambian population.

Typical modern information systems are required to process copious data. Conventional manual approaches can no longer effectively analyze such massive amounts of data, and thus humans resort to smart techniques and tools to complement human effort. Currently, network security events occur frequently, and generate abundant log and alert files. Processing such vast quantities of data particularly requires smart techniques. This study reviewed several crucial developments of existent data mining algorithms, including those that compile alerts generated by heterogeneous IDSs into scenarios and employ various HMMs to detect complex network attacks. Moreover, sequential pattern mining algorithms were examined to develop multi-step intrusion detection. These studies can focus on applying these algorithms in practical settings to effectively reduce the occurrence of false alerts. This article researched the application of data mining algorithms in network security. The academic community has recently generated numerous studies on this topic.

:. Background and Objectives: Pulmonary embolism, PE, incidence had been increasing in the last ten years. Computed thoracic pulmonary angiography, CTPA, had a major role in confirming PE di-agnosis.The main purpose of the study was to establish the prognostic value of a CTPA parameter: pulmonary artery obstruction index, PAOI, for PE risk assessment . A second objective of the re-search was to investigate the predictive accuracy of biomarkers (D-dimer, and cardiac Troponin T, c-TnT ), and PAOI, in 7-day mortality. The third objective of the study was the relationship between PAOI, and these biomarkers, in different etiologies of PE. Materials and Methods: The study com-prised 109 patients with PE, hospitalized, and treated between February 2021, and August 2022. They had different etiologies: deep vein thrombosis, DVT; persistent atrial fibrillation, AF; chronic obstructive pulmonary disease, COPD, exacerbation; Covid; and cancers. The investigations were the following: clinical examination; D-dimer testing, as a mandatory method for PE suspicion( values ≥ 500 µg/L were highly suggestive for PE); c-TnT , as a marker of myocardial injury(values ≥ 14 ng/L were abnormal); CTPA, with right ventricle dysfunction, RVD, signs, and PAOI. Treat-ments were according to PE risk: systemic thrombolysis (in high risk , and hemodynamic instability); low weight molecular heparins, LWMH, after systemic thrombolysis, or in high risk PE, with he-modynamic stability; direct oral anticoagulants, DOAC (in low, and intermediate risk). Results: The relationship PAOI- D-dimer, and PAOI- c-TnT, had very strong statistical correlation, for the entire sample, and for DVT, AF, COPD, Covid subgroups ( Rho = 0.815-0.982). PAOI had a high predic-tive accuracy for intermediate , and high risk together (area under curve, AUC=0.948), and high risk PE (AUC= 0.993). For 7-day mortality, D-dimer , and c-TnT had high predictive accura-cy(AUC=0.921, and 0.979). PAOI had statistical significance for 7-day mortality in Covid (p=0.045), and cancer (p=0.038) patients. Conclusions: PAOI was an important tool for PE risk as-sessment. D-dimer , and c-TnT were valuable predictors, for 7-day mortality in PE. PAOI, and D-dimer; PAOI, and c-TnT were strongly correlated, for the entire PE sample, and for DVT, AF, COPD, and Covid patients.

(1) Background: The RDW-CV has predictive value in many pregnancy-related conditions. Re-search question: Can the RDW-CV be utilized predictively in pregnant patients with thrombo-philia? Aim of the study: To carry out a detailed analysis of the RDW-CV in pregnant patients with treated thrombophilia as compared with pregnant patients without thrombophilia who de-livered via cesarean section at term. (2) Methods: We studied 160 pregnant patients, including 80 pregnant patients with treated thrombophilia in the study group, and another 80 patients of a similar age and parity. The patients were referred to our hospital for delivery at term by means of a cesarean section between 1/10/2017 and 1/12/2021. Every patient received a sonogram during the first 1–2 days after the cesarean section, and their uterine evaluation was interpreted using the PUUS (Postpartum Uterine Ultrasonographic Scale). (3) Results: Our PUUS≥1 pregnant and postpartum patients with treated thrombophilia were the only group with an RDW-CV value over 14. No deep vein thrombosis was observed during hospitalization, showing that the antico-agulant treatment was necessary and effective. An RDW-CV of 14.5 was the highest value in the Rh-negative group of pregnant patients with treated thrombophilia. An RDW-CV of 14.48 was the highest level in the Rh-negative postpartum patients with treated thrombophilia. (4) Conclu-sion: An RDW-CV of ≥14 can predict uterine hematometra (PUUS≥1). The RDW-CV values were higher in Rh-negative patients.

The modern supply chain (SC) is growing in terms of data, devices, users, and stakeholders, which introduced new security challenges and threats, especially with the reliance on centralized servers or cloud platforms. In addition, increased trust among system participants exposes the SC to a higher risk of vulnerabilities which require strong security measures. This article proposes a hybrid security framework for SC systems, BC-DRLzSC, that integrates Blockchain (BC) and Deep Reinforcement Learning (DRL) designed to operate in a zero trust (ZT) environment. In particular, we propose a decentralized BC-based approach integrated with smart contracts to manage system participant registration and authentication and to control access to system resources. BC-DRLzSC adopts a ZT architecture to reinforce SC security, which can be achieved with an advocate to verify each entity’s trustworthiness before granting or retaining access to system resources. Incorporating the ZT architecture, with BC and DRL, can potentially and significantly bolster SC system security. DRL is employed to develop a proactive attack detection model that continuously monitors the incoming traffic from authenticated nodes within the network and predicts any malicious actions. Finally, we evaluate the performance of our proposed DRL solution using the NSL-KDD dataset.

Many corporations have now revised their value statements to showcase their commitment to sustainable development and green business due to the pressing issues of climate and environmental damage. Despite the importance of value statements that can direct companies to achieve sustainable goals, what kind of values can be perceived as organizational orientations to sustainability remains unknown. This study explores how the general public views the inclusion of sustainable components in value statements from the listed companies in Hong Kong by using Q-sort methodology (n = 30). Analyzing the final sample of 40 value statements extracted from 27 listed companies, we identified three factors related to sustainability, namely, Empowering business process management, Empowering customer-centric excellence, and Empowering sustainable progress. This study provides an additional component to the traditional triple bottom line by suggesting that internal operation of a company is an emerging idea to understand corporate sustainability.

Kenyan coffee is ranked among the best in the world and 99% is exported mainly to Germany, Sweden and Belgium, the USA and Saudi Arabia. Kenya produces quality Arabica beans which are generally recognized and upgraded with other relatively lower brands. In 1937, the Kenya Planters Cooperative Union (KPCU) was formed to represent small farmers' interests. In 1944, in the Coffee Board of Kenya (CBA) the law required smallholders to join local growing cooperatives run by government to reduce the power of large estates to control the board. Many reforms in the coffee industry have been initiated. This review explores evolution and existing coffee varieties in Kenya, the coffee value chain and the regions that grow coffee in Kenya. Additionally, the variety agronomics and appearance that encompass; quality potential at different altitudes, yield potential and nematodes susceptibility.

This study explores the current landscape of social value (SV) research in the construction industry, analyzing global trends and identifying future research directions. Using bibliometric analysis, research published in Elsevier Scopus database from 2013 to 2023 was extracted using the keywords "social value" AND "construction industry." Results indicate a focus on social value indicators, socioeconomic impacts, project management, innovative practices, and cross-sector collaborations. The study also reveals a lack of attention to SV in African countries' construction sectors. By highlighting research areas and identifying gaps, this study contributes to academic literature, suggesting the need for guidelines, particularly in developing countries, and advocating for further research on SV in the built environment and strategies for global social value creation.

Introduction. Autopsy is a medical procedure that consists of the corpse’s examination to determine the cause of death and obtain information on pathological conditions or injuries present in the body. In recent years there has been a reduction in hospital autopsies and an increase in forensic autopsies. Material and methods. A retrospective observational study was conducted on the reports of all the 645 hospital autopsies performed at Polyclinic of Bari from 2006 to 2021.Results. Group A, 2006-2009, 174 cases were studied: 58% male, 58% adults, 55% neonatology, pulmonary disease was the cause of death in 23%, and 55% of discrepancy between clinical and autopsy diagnosis. Group B, 2010-2013, comprised 119 cases: 52% male, 46% infants, 48% neonatology, pulmonary disease was the cause of death in 25%, and 56% of discrepancy between clinical and autopsy diagnosis. Group C, 2014-2017, comprised 168 cases: gender equality, 37% infants, 25% gynecology, pulmonary disease was the cause of death in 24%, and 58% of discrepancy between clinical and autopsy diagnosis. Group D, 2018-2021 comprised 184 cases: 56% male, 38% adult, 32% gynecology, pulmonary disease was the cause of death in 27%, and 58% discrepancy between clinical and autopsy diagnosis.Conclusion. The study of hospital autopsies at the Polyclinic of Bari shows that the discrepancy between clinical and autopsy diagnosis is around 56.75%. Thus, the hospital autopsy is helpful in the modern age, especially for diagnosing fetal and neonatal diseases.

The paper presents an error model of a measurement chain containing link performing discrete wavelet transform algorithm which is most often the last stage of measurement signal processing. The goal is to determine the uncertainty budget of the input quantities of the wavelet transform algorithm. The error model takes into account parts of analog, analog-to-digital and digital processing, describing the properties of subsequent fragments of the chain using their transmittance and processing functions. The proposed model enables the description of both deterministic and non-deterministic properties of signal errors. The proposed model was validated using an example measurement chain created for this purpose.

According to ISO/TR 23383, smart textiles reversibly interact with their environment and respond or adapt to changes in the environment. The present review and bibliometric analysis was performed on 5,810 documents (1989–2022) from the Scopus database, using VOSviewer and Bibliometrix/Biblioshiny for science mapping. The results show that the field of smart textiles is highly interdisciplinary and dynamic, with an average growth rate of 22% and exponential growth in the last 10 years. Beeby, S.P., and Torah, R.N. have published the highest number of papers, while Wang, Z.L. has the highest number of citations. The leading journals are Sensors, ACS Applied Materials and Interfaces, and Textile Research Journal, while Advanced Materials has the highest number of citations. China is the country with the most publications and the most extensive cooperative relationships with other countries. Research on smart textiles is largely concerned with new materials and technologies, particularly in relation to electronic textiles. Recent research focuses on energy generation (triboelectric nanogenerators, thermoelectrics, Joule heating), conductive materials (MXenes, liquid metal, silver nanoparticles), sensors (strain sensors, self-powered sensors, gait analysis), specialty products (artificial muscles, soft robotics, EMI shielding), and advanced properties of smart textiles (self-powered, self-cleaning, washable, sustainable smart textiles).

A novel electrospun nanofiber was developed using polyamide-6 (PA) and ε-poly-L-lysine (PL). PA is a popular textile polymer having desirable mechanical and thermal properties, chemical stability, and biocompatibility. However, PA nanofibers are prone to bacterial growth and user discomfort. PL, a natural homopolyamide, is non-toxic, antimicrobial, and hydrophilic but lacks spinnability due to its low molecular weight. Given its similar backbone structure as PA, with an additional amino side chain, PL was integrated with PA to develop multifunctional nanofibers. This study explores a simple, scalable method to obtain PL nanofibers by utilizing the structurally similar PA as the base. The goal was to enhance the functionality of PA by addressing its drawbacks. The study demonstrates spinnability of varying concentrations of PL with base PA while exploring compositions with higher PL concentrations than previously reported. Electrospinning parameters were studied to optimize the nanofiber properties. The effects of PL addition on morphology, hydrophilicity, thermal stability, mechanical performance, and long-term antimicrobial activity of nanofibers were evaluated. The inclusion of PL in PA-based nanofibers resulted in super hydrophilicity, increased tensile strength, and efficient antimicrobial properties with long-term stability. These enhanced characteristics hold promise for the composite nanofiber’s application in medical and protective textiles.

.Bacground: Sepsis remains a major health challenge worldwide, characterized by a dysre-gulated host response to infection, leading to high mortality and morbidity in intensive care units (ICUs). The Fibrosis 4 (FIB-4) index, originally developed to assess liver fibrosis in hepatitis C patients, has recently been explored for its potential prognostic value in sepsis patients. Method: This study retrospectively analyzed 309 sepsis patients admitted to the Internal Me-dicine and Anaesthesia ICUs between December 12, 2021, and December 15, 2023, to inves-tigate the relationship between FIB-4 levels, Acute Physiology and Chronic Health Evaluation (APACHE), and Sequential Organ Failure Assessment (SOFA) and clinical outcomes. Results: The study found that higher FIB-4 measurements were statistically significantly asso-ciated with increased 28-day mortality, with a cut-off value of 4.9 providing a sensitivity of 54.92% and specificity of 74.25%. Logistic regression analysis indicated that elevated Conclusion:FIB-4 levels were a significant predictor of early mortality, suggesting that the FIB-4 index could serve as a valuable prognostic tool in assessing the severity and prognosis of sepsis patients.

The ability to detect the presence as well as classify the activities of individuals behind visually obscuring structures is of significant benefit to police, security and emergency services in many situations. This paper presents the analysis from a series of experimental results generated using a through-the-wall (TTW) Frequency Modulated Continuous Wave (FMCW) C-Band radar system named Soprano. The objective of this analysis was to classify whether an individual was carrying an item in both hands or not using micro-Doppler information from a FMCW sensor. The radar was deployed at a standoff distance, of approximately 0.5 m, outside a residential building and used to detect multiple people walking within a room. Through the application of digital filtering, it was shown that significant suppression of the primary wall reflection is possible, significantly enhancing the target signal to clutter ratio. Singular Value Decomposition (SVD) signal processing techniques were then applied to the micro-Doppler signatures from different individuals. Features from the SVD information have been used to classify whether the person was carrying an item or walking free handed. Excellent performance of the classifier was achieved in this challenging scenario with accuracies up to 94%, suggesting that future through wall radar sensors may have the ability to reliably recognize many different types of activities in TTW scenarios using these techniques.

The purpose of this paper is to explore which financial performance indicators (FPIs) evaluate the level of supply chain capability (SCC) that explicitly touches all of the business functions and processes within and beyond the company. The authors investigated nine FPIs that were selected from the financial statements of 155 companies within nine industries. The authors find that suitable FPIs to measure SCC for shareholders’ value are return-on-assets (ROA), days-sales-outstanding (DSO), and current ratio (CR). This means that higher ROA, shortened DSO, and an appropriate level of CR could reach a sustainable supply chain. These results will help the industry to avert a major disruption in supply chain processes and activities using suitable financial performance indicators.

The article delves into the intricate phase transitions of 1-Octadecanol and n-Nonadecane within a binary system, unveiling dynamic structural changes under varying conditions. Through Fouri-er-transform infrared (FTIR) analysis, specific molecular vibrations were identified, shedding light on the molecular composition and interactions. The study highlights the challenges in detecting subtle phase transitions and emphasizes the individuality of molecular behaviours in closely related compounds. The findings underscore the complexity of phase transitions in binary systems and advocate for a nuanced approach to studying molecular structures and behaviours. Addi-tionally, the research contributes valuable insights into the molecular dynamics of Organic Polymer Functional Adsorption Materials, offering implications for synthetic waxy layers in plant epidermis.

The study evaluated potassium peroxymonosulfate (PPMS) efficacy against rifampicin-resistant Salmonella Infantis (rif-SI), Escherichia coli (E. coli), Salmonella Infantis (SI), Newcastle disease virus (NDV) and avian influenza virus (AIV). The assessment encompassed varied concentrations, organic material conditions, and exposure durations to comprehensively evaluate PPMS efficacy. Moreover, PPMS’s efficacy was tested on diverse carrier surfaces and clothing to evaluate its bactericidal and virucidal potential. At the recommended concentrations (1X), PPMS effectively inactivated all pathogens within 5 sec, except for NDV, which required 30 sec in the presence of organic materials. At 0.5X, PPMS successfully inactivated E. coli, AIV and NDV within 5 sec in the absence of organic material. However, rif-SI and SI necessitated 30 sec for inactivation. Most pathogens were inactivated within 30 sec, with the exception for AIV, which was inactivated within 5 sec. PPMS effectively eliminated rif-SI on all carriers within 30 sec. Moreover, at both concentrations, PPMS successfully inactivated AIV on all carriers within 30 sec, except on stainless steel at 0.5X. Furthermore, PPMS at both concentrations required 5 and 30 sec, respectively, to inactivate AIV on the rayon sheet. Therefore, due to its demonstrated efficacy against a wide range of pathogens across diverse surfaces, PPMS emerges as a crucial alternative disinfectant significantly enhancing biosecurity on and around chicken farms. found in and around animal farms, slaughterhouses, and hospitals.

Recent years have witnessed a boom of fashion bloggings sharing information about clothing and cosmetics on diverse social media platforms. Constant exposure to fashion-related digital information heavily impacts the cognition and behaviour of Chinese youth. Compared to the substantial studies on the impact of social media, scarce research has been conducted on how youth’s cognitive processing of fashion-related digital information interacts with motivational factors to determine the subsequent behaviour. This study made an initial attempt to address this issue by exploring the successive associations between clothing motivation (amotivation, controlled, and autonomous motivation), online critical thinking (for information credibility, objectivity, and relevance), and the subsequent behavioural intentions. A total of 1997 Chinese youths with diverse educational backgrounds voluntarily participated in the study. Results confirmed the direct links between clothing motivation and behavioural intentions, but these links were mediated by different online critical thinking skills. This study provides new insights for both practitioners and scholars in the fields of education, psychology, social media, and marketing.

The gastrointestinal tract is colonized by trillions of different microorganisms, named the gut microbiota, which is key to degrade undigested food such as dietary fibers. The fermentation of these food components leads to the production of short-chain fatty acids (SCFA) acetate, propionate, and butyrate, which exploit several beneficial roles for the host’s health. Their production and absorption happen in different ways in the human intestine and depend on the type of dietary fiber reaching the gut and the microorganisms involved in the fermentation. The supplementation of SCFAs, mostly butyrate, in treating gastrointestinal, metabolic, cardiovascular, and gut-brain-related diseases has been reported in the medical literature. This review aims to give an overview of the production and absorption dynamics of acetate, propionate, and butyrate in the human gut, with a final focus on the role played by these SCFAs on gastrointestinal and metabolic health and the present therapeutic implications.

Consumer, as one of the vital stakeholders of fashion supply chain, has a significant role to play to transition fashion industry into sustainable direction. From purchasing and care practice to donation and disposal, every step of their decision has impact on the environment. Various internal and external variables, including culture, custom, value, belief, norm and assumption, economy, gender, and education etc. influence forming that decision. The result of the decision not only directly impacts he environment and society, but also consumer culture and future business opportunity. This study synthesizes a wide spectrum of consumer behavior related to clothing consumption and associated environmental impact. Building on the synthesis, a holistic discussion is offered which can provide relevant behavioral guideline to consumers as well as other stakeholders.

To increase the calculation speed of the computational fluid dynamics (CFD) based simulation for the gas-solid flow in fluidized beds, a Markov chain model (MCM) is developed to simulate the particle movement in a two-dimensional (2D) circulating fluidized bed (CFB) riser. As a statistic model, the MCM takes the CFD-discrete element method (DEM) results as samples to calculate the transition probability matrix of particles, which can describe the macroscopic regularities of the particle movement and guide the numerical simulation of the particle motion based on the Monte Carlo method. The particle distribution snapshots, residence time distribution (RTD) and mixing obtained from both the CFD-DEM and the MCM are compared. Results show that the computational speed of the MCM is faster than that of the CFD-DEM by about 2 orders of magnitude, and the difference of the mean particle residence time calculated by the two models is less than 2%. Besides, the MCM can well describe the time-averaged particle mixing compared to the CFD-DEM.

Nowadays, considering the growing tendency of companies towards e-commerce as well as green production, and dual-channel green supply chain management has become particularly important. This paper investigates pricing decisions within a dual-channel green supply chain framework while considering the capital constraints faced by risk-averse manufacturer. Simultaneously, the impact of the degree of risk aversion, consumer green preferences, and channel preferences on the optimal decision-making process of green supply chain members is analyzed. We address the issue of financial constraints faced by manufacturer through bank loans and trade credit financing and compare the two cases. Our findings illustrate that trade credit financing outperforms bank loan financing in the dual-channel green supply chain. Moreover, pricing decisions under different models are influenced by consumer preferences and risk aversion. Specifically, the greenness of the product, wholesale price, and sale price exhibit negative correlations with manufacturers' risk aversion but positive correlations with consumer preferences.

Waste glycerol can be subjected to various processing operations, including purification and re-fining, to obtain glycerol of appropriate purity. In addition, alternative methods of utilising waste glycerol are also being sought, e.g. by converting it into other valuable chemical products or biofuels. Therefore, various technologies are being developed to utilise this type of waste effectively and sustainably. The production of value-added products from waste glycerol is an important issue that determines the improvement of the economic viability of biofuel production and corresponds to the model of a waste-free and emission-free circular economy. This paper characterised the mechanisms and evaluated the efficiency of existing methods of microbiological utilisation of waste glycerol into liquid biofuels, including biodiesel, bioethanol and biobutanol, and identified further directions for the production of value-added products. In addition, a bibliographical analysis of publications re-lated to the production of liquid fuels and economically valuable products from glycerol was carried out, the progress of research and application work was assessed and directions for future research were identified.

Effective management of the medicine supply chain is crucial for ensuring the availability of essential medicines and supplies in public health facilities. This study aimed to determine the utilization of the electronic logistic management information system (e-LMIS) in public health facilities and its implications for the medicine supply chain. A mixed-methods approach, combining both quantitative and qualitative data collection methods was used. The study was conducted in 106 healthcare providers from 35 public health facilities in Singida District. Six key informants were interviewed in a qualitative method. Of 106 participants, (62.3%) said they were somehow competent in e-LMIS utilization. In in-depth interviews, respondents underscored the system's utility for tracking stock levels, procurements, and managing orders. Staff shortage and lack of customized training were mentioned as major challenges, hindering efficiency in managing drug supplies. This study highlighted the positive impact of e-LMIS on various aspects of the medicine supply chain, including the timely submission of orders and enhanced inventory management. Sustained management support and regular utilization of the e-LMIS system are crucial for building and maintaining competence among healthcare providers, thereby optimizing the medicine supply chain and ultimately improving healthcare delivery.

Twenty-first century infrastructure needs to respond to changing demographics, becoming climate neutral, resilient, and economically affordable, while remaining a driver for development and shared prosperity. However, the infrastructure sector remains one of the least innovative and digitalized, plagued by delays, cost overruns, and benefit shortfalls [1-4]. The root cause is the prevailing fragmentation of the infrastructure value chain [5]. To support overcoming the shortcomings, an integration of the value chain is needed. This could be achieved through a use-cased-based creation of federated digital platforms applied to infrastructure projects. Such digital platforms enable full-lifecycle participation and responsible governance guided by a shared infrastructure vision.

We study a two-echelon supply chain made up of a supplier and a manufacturer, both of which can reduce their component/product carbon emissions. With the vertical technology spillovers, we explore the optimal decisions of centralized and decentralized supply chains with price dependent demand and propose coordination strategy for the decentralized supply chain. Considering the cost contraction effectiveness of the technology spillovers, the centralized and decentralized game theoretic models of a two-echelon supply chain are developed to investigate optimal decisions of pricing and carbon emissions reduction. Through a systematic comparison and numerical analysis, we show that the profits of both players and the entire supply chain improve with the effect of technology spillovers increasing. Carbon emissions reduction will be taken by various protective measures so that the supplier and the manufacturer who do not innovate can hardly share the results of innovating via the “free-riding” methods when the technology spillover is relatively small. We also propose a revenue-cost sharing contract through bargaining to enhance the performance of the decentralized supply chain.

Abstract: Rice is one of the most important food crops in sub-Saharan Africa. Climate change, variability, and economic globalization threaten to disrupt rice value chains across the subcontinent, undermining their important role in economic development, food security, and poverty reduction. This paper maps existing research on the vulnerability of rice value chains, synthesizes the evidence and the risks posed by climate change and economic globalization, and discusses agriculture and rural development policies and their relevance for the vulnerability of rice value chains in sub-Saharan Africa. Important avenues for future research are identified. These include the impacts of multiple, simultaneous pressures on rice value chains, the effects of climate change and variability on parts of the value chain other than production, and the forms and extent to which different development policies hinder or enhance the resilience of rice value chains in the face of climatic and other pressures.

Ethiopian Airlines is a leading airline in the world. Its supply chain management is one of the most critical aspects in achieving its sustainability objectives. The present study aims to assess the sustainability practices and strategies of Ethiopian Airways in its supply chain, identifying areas for improvement and recommending strategies for enhancing sustainability. The study concentrates on pertinent sustainability concerns within the aviation sector while examining antecedent research on the sustainability of Ethiopian Airlines’ supply chain management strategies. The findings of the study reveal that there are several areas in need of improvement, including the implementation of waste reduction measures, the establishment of a recycling program, and the reduction of single-use plastic usage. It is suggested that promoting responsible tourism embodying sustainable practices is imperative, particularly within the airline context.

This research aims to explore the complex interplay between supply chain resilience (SCR), digital supply chain (DSC), and sustainability, focusing on the moderating influence of supply chain dynamism. The goal is to understand how these elements interact within the framework of contemporary supply chain management and how they collectively contribute to enhancing sustainability outcomes. The sample size is 300 CEOs and managers. The study approach integrates quantitative research methods. Structural equation modeling (SEM) is utilized to quantitatively analyze the direct and indirect effects of SCR and DSC on sustainability. The numerous surveys we conduct among supply chain ecosystem stakeholders provide a rich picture of practical implications and contextual nuances. In sum, our early findings generally support a positive relationship between SCR and sustainability in and of itself decrying the need for more resilient supply networks for sustainability. We further find the beneficial impact of digital technologies in promoting sustainability via enhancing environmental control and controlling for efficiency in supply chains. We also offer evidence to show that supply chain dynamism compounds the positive logic between SCR and DSC and sustainability. As a final word, it must be noted that our work speaks to the burgeoning Supply Chain Dynamism as moderator literature by examining the direct and contingent effects of SCR and DSC on not only performance but sustainability. By shedding light on the moderating role of dynamism, the study provides fresh insights into the multifaceted nature of supply chain management and sustainability practices. The study's findings enhance theoretical understanding by elucidating the synergistic effects of SCR, DSC, and sustainability in dynamic supply chain settings. It augments existing theoretical frameworks by integrating concepts of resilience, digitalization, and sustainability into a comprehensive model. Practical and economical, the research offers actionable guidance for organizations aiming to improve sustainability performance through resilient and digitally advanced supply chains. By acknowledging the role of supply chain dynamism, managers can tailor strategies to manage disruptions effectively and leverage digital innovations. Economically, adopting sustainable practices can result in cost savings and competitive advantages. The research emphasizes the importance of aligning supply chain strategies with sustainability goals to drive long-term value and societal impact.

Low carbon supply chain management (LCSCM) strategies are required in the Indian manufacturing industries due to rapidly growing energy usage for financial and environmental concerns. LCSCM technologies face a number of challenges that limit their adoption. Eleven hurdles were selected from the literature as well as the recommendations of business and academic experts. These barriers are defined by a number of factors, including a lack of information, financial worries, environmental concerns, and governmental limits, among others. In addition, efforts are being made to quantify the most optimal relevant barriers using Multi criteria decision making (MCDM) techniques such as interpretive structural modeling (ISM) and decision-making trail and evaluation laboratory (DEMATEL). MICMAC analysis is used to estimate the sensitivity and priority of barriers based on dependency power and driving power. One of these barriers is a needed factor; three are driving elements; four barriers are linked factors; and three are self-sufficient factors. The findings of this study can help academic specialists, industry representatives, and practitioners in their ongoing attempts to adopt 'LCSCM techniques' in Indian manufacturing industries. The model is appropriately explained and applies the link between the barriers.The objective of this paper is the Evaluation and selection of most influential of Barriers to Adopt Low Carbon Supply Chain Management (LCSCM) in the Indian Manufacturing Sector is interrelated.

The bivalve mollusk, Anadara tuberculosa (Black Shell, in Spanish Concha prieta, "CP"), is found on America's Pacific coast, where it is harvested for subsistence and commercial markets. This paper aims to diagnose the performance of the black shell's value chain. We also identify several challenges that must be addressed to improve the sustainability of the black shell fishery in Ecuador. The descriptive methodology was quantitative, with a non-experimental, field, cross-sectional, and ex post facto design. Similar questionnaires were designed, validated, and applied to each link in the production chain to collect information. The performance of the value chain was diagnosed in the dimensions of productivity, competitiveness, and quality of life, reaching a 75.1% index, a result that indicates that the value chain has a moderate to good performance level. However, the value chain can be improved if the following challenges are met: 1) Restoration of the mangrove ecosystem, 2) Promotion of low-intensity shellfish aquaculture, 3) Good sanitary management and purification, 4) Promotion of value-focused ventures, 5) Strengthening of organizations and agreements for the use and custody of mangroves, and 6) Strengthening of institutions that contribute to the advancement of these challenges.

This review delves into the growing field of flexible and stretchable strain sensors utilized in human gait analysis, focusing on determining knee bending angle and muscle activities when a human subject walks. Recent advancements have enabled these sensors to accurately capture biomechanical parameters while accommodating the body's natural movements. We examine the principles underlying these sensors' design and fabrication techniques, emphasizing their flexibility, stretchability, and biocompatibility for seamless integration into wearable systems. Through critical evaluation of existing methodologies, we assess the reliability and validity of these sensors in quantifying gait parameters. Furthermore, we discuss this technology's clinical and research implications, highlighting its potential in personalized rehabilitation and sports performance optimization. We provide an overview of flexible strain sensors and their application for analyzing human walking gait, especially for observing walking gait in rehabilitation programs. First, we present the basic working principles of various flexible strain sensors. Second, by the application of flexible strain sensors as walking gait monitoring. Finally, current challenges and future opportunities in this research area are discussed. By synthesizing current knowledge and outlining future directions, this review aims to provide insights for researchers and practitioners seeking to leverage flexible and stretchable strain sensors for comprehensive human gait analysis.

According to many research groups, high glucose induces over production of superoxide anions, and reactive oxygen species (ROS) in general is the link between high glucose levels and the toxicities seen at cellular levels. Respiratory complex anomalies could lead to the production of ROS. Calcium [Ca2+], at physiological levels serves as a second messenger in many physiological functions. Accordingly, mitochondrial calcium [Ca2+]m overload leads to ROS production which could be lethal to the mitochondria through various mechanisms. The F1F0-ATPase (ATP syn-thase or complex V) is the enzyme that is responsible for catalyzing the final step of oxidative phosphorylation. It does so by coupling the translocation of protons in the mitochondrial in-termembrane space and shuttling them to the mitochondrial matrix for ATP synthesis to take place. Mitochondrial complex V T8993G mutation specifically blocks the translocation of protons across the intermembrane space thereby blocking ATP synthesis leading to Neuropathy, Ataxia and Retinitis Pigmentosa Syndromes (NARP). This study seeks to explore the possibility of [Ca2+]m overload mediating the pathological roles of high glucose in defective respiratory chain mediated mitochondrial stress. The NARP cybrids are the in vitro experimental models for the cells with F1FO-ATPase defects, these cells harbor 98% of mtDNA T8993G mutation. Their coun-terparts 143B osteosarcoma cell lines are the parental cell lines used for comparisons. We uncov-ered that, NARP cells mediated and enhanced the death of the cells (apoptosis) when incubated with hydrogen peroxide (H2O2) and high glucose respectively as depicted by the MTT assay of cell viability. Furthermore, using the fluorescence probe-coupled laser scanning confocal imag-ing microscopy, NARP cells significantly enabled mitochondrial reactive oxygen species (mROS) formation and enhanced the depolarization of the mitochondrial membrane potential (ΔΨm). Elucidating the mechanisms of sugar enhanced toxicity on mitochondria would help in the fu-ture to alleviate the symptoms of patients associated with (NARP) syndromes.

Recycling waste products is an environmental-friendly activity that can bring benefits to accompany, saving manufacturing costs and improving economic efficiency. For the beer industry, recycling bottles can reduce manufacturing costs and reduce the industry's carbon footprint. This paper presents a model for a multi-objective collection-distribution center location and allocation problem in a closed loop supply chain for the beer industry, in which the objective is to minimize total costs and transportation pollution. Uncertainties in the form of randomness and fuzziness are jointly handled in this paper to ensure a more practical problem solution, for which returned bottle sand unusable bottles are considered fuzzy random variables. A heuristic algorithm based on priority-based global-local-neighbor particle swarm optimization (pb-glnPSO) is applied to ensure reliable solutions for this NP-hard problem. A case study on a beer operation company is conducted to illustrate the application of the proposed model and demonstrate the priority-based global-local-neighbor particle swarm optimization.

The COVID-19 pandemic over the past years has shown a great need for rapid, low-cost and on-site detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). In this paper, an aptamer-based colloidal gold nanoparticle lateral flow test strip was well developed to realize the visual detection of wild type SARS-CoV-2 spike protein (SP) and multiple variants. Under the optimal reaction conditions, a low detection limit of SARS-CoV-2 S protein of 0.68 nM was acquired, and the actual detection recovery was 83.3% to 108.8% for real world samples. This suggests a potential tool for the prompt detection of SARS-CoV-2 with good sensitivity and accuracy, and a new method for the development of alternative antibody test strips for the detection of other viral targets.

Coffee production around the world is under threat due to climate variability and change, and drought stress will increase in many coffee regions, nutrient management practices could enhance the adaptation capacity of coffee production. Considering that coffee is a sensitive crop to boron (B) deficiency, this research investigated how B nutrition improves resistance to drought stress in coffee under controlled conditions as well how with interaction with calcium (Ca+2) influences productivity, seed compositions, and soil fertility during a production cycle of 5 year. Under controlled conditions for seven months, coffee plants were submitted to water stress with and without B nutrition. In the field, coffee plantation was submitted to two B rates (0,6 and 1,1 kg. ha-1-year-1) with fixed calcium (Ca+2) rate and, a control without Ca+2 and B. After 9 months of growth and seven months of water deficit, under controlled conditions, the application of B significantly (p<0,05) reduced the negative effect of water stress on coffee growth. Under field conditions, after a production cycle of 5 years, the application of 0,6 kg B and 77 kg CaO. ha-1. year-1 yielded 14% more than the control without B and Ca+2. An increase of the B rate to 1.1 kg.ha-1.year-1 with the same Ca+2 rate increased the productivity significantly (p<0,05) by 37% compared to the control. B application also improved significantly (p<0,05) the B content in the soil at 0-30 cm. The B treatments influenced the biochemical composition of the green coffee beans, with a significant (p<0,05) inverse correlation between the B content of the green coffee beans with caffeine, and unsaturated fatty acids (UFAs) mainly, oleic, linoleic, and linolenic acids which are considered negative descriptors of the coffee quality.

ESG (Environmental, Social, and Governance) responsibility fulfillment increasingly affects enterprise valuation. Although researchers debate about the precise effects, the prevailing view suggests a linear relationship between ESG performance and enterprise value. This study introduces a novel ESG responsibility performance metric through the Regulated Intermediary Model to delve into this relationship within the Chinese context. Our findings reveal an inverted U-shaped relationship between ESG performance and enterprise value, with financing constraints having a significant moderating effect. These findings remain robust after employing instrumental variables to mitigate potential endogeneity. Heterogeneity analysis demonstrates that this inverted U-shaped relationship is particularly pronounced in non-polluting and non-state-owned enterprises. Moreover, a comparison between equity and debt financing mechanisms underscores that improved ESG performance is associated with lower cost of equity financing, thereby enhancing enterprise value. Financial institutions are encouraged to leverage innovative financial instruments to diversify enterprise financing channels and alleviate financing constraints of enterprises that fulfill their ESG responsibilities.

The estimation of ecological service system value of water resources in Tarim river basin is of great significance for resource allocation management and ecological protection. However, there is still no unified and complete evaluation method for ecological service system value of inland river in China. Based on the perspective of the whole value chain, the study classifies its ecological service functions, and divides 11 sub-categories into 4 categories (supply, regulation, culture and support) as evaluation indicators to carry out quantitative evaluation. The results showed that the total value of ecological service system in Tarim river basin in 2018 was 4156.5247×108 Yuan, and the value of regulating function, cultural function, supporting function and supply function were successively from high to low, which were as follows: 2565.6825×108 Yuan, 1009.5471×108 Yuan, 884.0770×108 Yuan, 20.3350×108 Yuan, among which the value of regulation function is dominant.

This study aims to test a model linking destination image, perceived value, tourist satisfaction, and tourist loyalty. Based on a sample of 300 tourists travelling by car from the World Natural Heritage Site of Tianchi, China, a new model of destination image was explored and data were analysed using partial least squares structural equation modelling (PLS-SEM). The results show that perceived value and satisfaction are direct antecedents of destination loyalty. Above all, perceived value and tourist satisfaction mediate the relationship between destination image and loyalty. Finally, this study discusses the theoretical and management implications of the findings in order to boost the tourism industry in the context of car trips.

Backyard production systems (BPS) are highly distributed in central Chile. Poultry BPS have been previously characterized; however, swine BPS have not yet been deeply characterized in central Chile. In addition, there is evidence that zoonotic pathogens, such as influenza A virus and Salmonella spp., are circulating in both poultry and pigs kept these production systems. A total of 358 BPS located in central Chile were evaluated between 2013 and 2015 by interviewing farm owners. Severe deficiencies in biosecurity measures were observed. The value chain of swine backyard production identified feeding, products and veterinary visits, and replacement or breeding animals as the main inputs to the backyard. The most common origin of swine replacements was from outside the BPS (63%). Meat and live animals (piglets and breeding animals) were identified as the main outputs of the system. In 16% of BPS, breeding animals were lent to other BPS, indicating the existence of animal and animal products movement in and out of backyard farms. Results from this study suggest that swine BPS in central Chile represent an animal-human interphase that need special attention to direct preventive measures aimed at avoiding the introduction and dissemination of animal pathogens and the emergence of zoonotic pathogens.

With the continuous growth of electric and electronic appliances’ usage, the waste produced with obsolete material (e-waste) has an increasing environmental impact. Also, the production of such appliances bears to increased consumption of natural resources and produces a multitude of toxic and hazardous substances, which typically are not properly treated. One of the approaches that may be adopted to reduce such problems relies on the circularization of the current linear model, commonly adopted in the EEE value chain. This includes recovering eol products and reintroducing its parts, components, or raw materials into the value chain (e.g. semiconductors, circuit boards, raw metals, etc.), thus contributing to a more sustainable value chain. In this article, we present a state-of-art review that focuses on approaches and solutions for the EEE value chain traceability, and analyses the technologies that may be beneficial for promoting and implementing the CE model in this value chain.

Italy is the leading European producer of rice. The transition to organic farming could represent a solution for environmental protection, as well as for the economic sustainability of farms, consumer safety and as a measure of climate mitigation, but it currently displays several weaknesses in the control and certification system. The objective of the current study is to propose advice for improving the control and certification scheme in the organic rice sector. To achieve this aim, we adopted a qualitative methodology based on participant observation at stakeholders’ meetings, focus groups, community-led workshops and deep interviews with relevant local actors. Findings show that there are some solutions to mitigate the weakness of the Italian certification scheme. The study also produces managerial implications to improve the Italian organic rice system.

There is limited information on Tamarind production, trade and value added products in Kenya. Of late, there is growing interest in the domestic and export markets due to its multiple uses. The objective of this paper is to review existing literature to identify the missing value chain links which may help catalyse the scaling up of production and commercialization of Tamarind. Selected literature and interviews with traders and extension staff in the Coastal Counties were used to collect information for this study. Tamarind fruits are mainly collected in the wild in semi-arid areas of the country and marketed through informal channels. Mombasa is the terminal market for tamarind from Kenya and Uganda, from where domestic consumers and exporters obtain their supplies. Globally, virtually every part of tamarind tree (pulp, seed, leaves, flowers, bark and roots) has either nutritional, industrial or medicinal value. Tamarind fruit contains substantial levels of carbohydrates, proteins, vitamins, minerals and essential amino acids making it potentially useful in addressing wide spread malnutrition. Its anti-oxidant, anti-inflammatory, anti-microbial, anti-fungal and anti-diabetic properties gives tamarind wider application in conventional and traditional medicine. The findings suggest that scaling up the production and commercialization of tamarind in the country requires both public and private sector investment. The structure of this partnership should consist of the following value chain links: An efficient Seed / seedling system as a source of planting materials; production hubs by farmer associations, government institutions and private farms; aggregation centres for assurance of volumes and quality; processing, value addition and product diversification; an efficient distribution systems of wholesalers and retailers, particularly supermarkets; exporters and consumers. The agenda for further research should include breeding and availing early maturing cultivars demanded by the export market, quality management andvalue addition technologies.

Abstract: Short-chain fatty acids (SCFAs) are the major microbial metabolites produced in the gut through the fermentation of non-digestible fibers. SCFAs act through free fatty acid receptor 2 and 3 (FFAR2 and 3), which are known to be expressed on glucagon-like peptide-1 (GLP-1)-secreting L-cells. This pathway is suggested to protect the intestinal mucosa. We aimed to investigate how lack of fiber affects the production of SCFAs and the vulnerability of the co-lon. Additionally, the involvement of FFAR2 and 3 in GLP-1 secretion and intestinal protection. SCFA concentrations in luminal contents from chow- or fiber-free diet-fed mice were analysed by LC‒MS. SCFAs were applied to isolated perfused colons from FFAR2/3 double KO and WT mice, and the secretion of GLP-1 was measured. Dextran sulfate sodium (DSS) colitis was induced in chow- or fiber-free diet-fed mice as well as in FFAR2/3 KO and WT mice. The removal of die-tary fiber significantly decreased total colonic SCFA concentrations, with specific decreases in acetate, propionate, and butyrate. SCFAs significantly increased colonic GLP-1 secretion but not in FFAR2/3 KO mice. In the DSS model, the removal of dietary fiber increased the severity and delayed recovery. Colitis severity was independent of FFAR2 and FFAR3 signaling.

Renewable nanocellulose materials received increased attention owing to their small dimensions, high specific surface area, high mechanical characteristics, biocompatibility, and compostability. Nanocellulose coatings are among many interesting applications of these materials to functionalize different by composition and structure surfaces, including plastics, polymer coatings, and textiles with broader applications from food packaging to smart textiles. Variations in porosity and thickness of nanocellulose coatings are used to adjust a load of functional molecules and particles into the coatings, their permeability, and filtration properties. Mechanical stability of nanocellulose coatings in a wet and dry state are critical characteristics for many applications. In this work, nanofibrillated and nanocrystalline cellulose coatings deposited on the surface of polymer films and textiles made of cellulose, polyester, and nylon are studied using atomic force microscopy, ellipsometry, and T-peel adhesion tests. Methods to improve coatings adhesion and stability using physical and chemical cross-linking with added polymers and polycarboxylic acids are analyzed in this study. The paper reports on the effect of the substrate structure and ability of nanocellulose particles to intercalate into the substrate on the coating adhesion.

When profit-driven renewal is difficult to implement, many historic districts are “frozen protected” in China. In the social context of “building cities for the people” in recent years, the public value-oriented renewal of urban historic areas plays an important role in the transformation of cities. This study investigates the strategies of historic district regeneration in China by integrating spatial form, urban governance, and public value. We propose a novel framework to analyze the regeneration of historic districts, using Taiyuan Bell Tower Street as a case study. The framework distinguishes between two dimensions: spatial and economic-social. In the spatial dimension, we focus on the transformation of spatial form to regenerate public value, emphasizing the attribute of "publicness" as central to urban regeneration efforts. This involves a tiered approach of excavating and upgrading historic districts at macro, meso, and micro levels. In the economic-social dimension, we explore urban governance to strengthen public value, involving government, market, and societal actors in a collaborative renewal process. The analysis highlights that a public value-oriented approach to heritage regeneration offers greater sustainability and could serve as a model for other cities seeking similar outcomes.

Brand communication and supply chain management are critical components of value co-creation in B2B markets, yet their interplay and implications remain underexplored in current literature. This qualitative study investigates how these elements synergistically contribute to mutual value creation among businesses. Through semi-structured interviews with senior executives and managers from diverse industries, key insights were gleaned regarding the strategic alignment of brand communication strategies with supply chain practices. Findings underscore the importance of authenticity, transparency, and consistency in brand messaging to build credibility and foster stakeholder trust. Supply chain management emerged as pivotal in supporting effective brand communication, facilitated by advancements in AI, blockchain, IoT, and cloud computing, enhancing operational efficiency and responsiveness across global networks. Entrepreneurship and emotional intelligence were identified as crucial drivers of innovation and collaboration within B2B contexts, augmenting organizational agility and resilience. Furthermore, the integration of sustainable practices within supply chain operations was found to enhance brand reputation and mitigate risks associated with environmental and ethical considerations. The study highlights actionable insights for practitioners, emphasizing the strategic integration of brand communication and SCM capabilities to navigate complexities, capitalize on emerging opportunities, and foster sustainable growth. This research contributes to a deeper understanding of the multifaceted dynamics shaping B2B interactions and provides a foundation for future research endeavors. By aligning brand communication strategies with SCM practices and leveraging technological advancements, businesses can enhance competitive advantage, cultivate enduring relationships with stakeholders, and achieve sustainable success in a dynamic global marketplace.

The study assessed the risk perception, attitude, and management tools of 260 randomly selected farmers and processors in the rice value chain using data elicited via a structured questionnaire. Descriptive statistics, Equally Likely Certainty Equivalent (ELCE) technique, Binary logistic regression, and a 5-point Likert scale were employed in the data analyses. Descriptive statistics show that the respondents are young, active, and in their productive age with an intermediate education level. Majority of the farmers and processors were risk averse. Risk aversion was common among farmers and processors. Farmers' risk attitudes and perceptions of risk are significantly influenced by a number of factors, including age, access to extension services, farm size, marital status, household size, education, income, training, and experience. Majority of rice farmers consider price risk as the most important risk while majority of processors perceive production risk as the most important risk. Pests and diseases, price fluctuation, drought, and lack of input were the most important source of risk to farmers, while processors perceived price fluctuation, technology adoption, and poor storage facilities as the most important source of risk. Off-farm investment, spraying for pests and diseases, cash contribution, market information, and cooperative were the important risk mitigating management strategies employed by the farmers/processors. The study suggests improvements in the identified risk sources, which could influence the attitude and perception of the farmers and processors.

Endometriosis is a prevalent chronic inflammatory disease characterized by a considerable delay between initial symptoms and diagnosis through surgery. The pressing need for a timely, non-invasive diagnostic solution underscores the focus of current research efforts. This study examines the diagnostic potential of the menstrual blood lipidome. The lipid profile of 39 samples (23 women with endometriosis and 16 patient of control group) was acquired using reverse-phase high-performance liquid chromatography-mass spectrometry with LipidMatch processing and identification. Profiles were normalized based on total ion counts. Significant differences in lipids were determined using the Mann-Whitney test. Lipids for the diagnostic model, based on logistic regression, were selected using a combination of variance importance projection filters and Akaike information criteria. Levels of ceramides, sphingomyelins, cardiolipins, triacylglycerols, acyl- and alkenyl-phosphatidylethanolamines, and alkenyl-phosphatidylcholines increased, while acyl- and alkyl-phosphatidylcholines decreased in cases of endometriosis. PE P-16:0/18:1 and CL 16:0_18:0_22:5_22:6 serve as marker lipids in the diagnostic model, exhibiting a sensitivity of 81% and specificity of 85%. The diagnostic approach based on dried spots of menstrual blood holds promise as an alternative to traditional non-invasive methods for endometriosis screening.

Aim: To analysis the relationship between healthy adults right ventricular diameter (RVD) and geographical factors. Location: China’s 22 provinces, municipalities and autonomous regions. Methods: Using correlation analysis the relationship between RVD and nine geographic factors, build predictive models by factor analysis. Results: There is significant correlation between RVD and geographical factors, and the annual average temperature is most relevant geographical factors, a predictive model was built by factor analysis: Ŷ = 19.46 + 0.0007072X1 + 0.001034X2 -0.05412X3 -0.001405X4 -0.0006351X5 + 0.02903X6 + 0.01243X7 -0.01033X8 + 0.03816X9 ± 0.63. Then using Kriging interpolation interpolate the geographical distribution of Chinese healthy adult right ventricular diameter reference value in ArcGIS software. Main Conclusion: If geographic factors can be derived in anywhere of China, RVD can be calculated by the model, you can also get RVD from geographical distribution.

Conventional traceability systems in Cambodian agriculture, such as Rubber Supply Chain Management (RSCM), often struggle to provide timely data and fair market prices, leading to mistrust among stakeholders, exploitation by intermediaries, and hindering progress towards ethical sourcing and sustainable practices. This research aims to showcase the potential of integrating blockchain technology, the Internet of Things (IoT), the InterPlanetary File System (IPFS), and Differential Privacy (DP) methods to empower Cambodian rubber farmers. By enhancing transparency, facilitating fair pricing, and promoting sustainable methods in the rubber industry, this integrated approach leverages Hyperledger Fabric (HLF) to create a decentralized and secure system for tracking rubber from its source to the end consumer. Integration with IPFS ensures secure and easily accessible data storage, further enhancing the system’s reliability. Additionally, the implementation of differential privacy techniques safeguards confidential data during information sharing among farmers and supply chain stakeholders, minimizing potential privacy concerns. This comprehensive system encourages consumers to make ethical and sustainable alternative options by providing accessible information on harvesting methods, processing procedures, labor conditions, and environmental impacts. The potential benefits extend beyond Cambodia, serving as a model for other developing countries aiming to modernize and enhance the agricultural distribution networks. Our results show that transaction send rates (TPS) and throughput in systems with and without differential privacy grow with increased transaction volumes. However, the system without differential privacy achieves greater scalability and efficiency above a certain threshold. However, it offers a slightly reduced latency, reflecting a trade-off between privacy and performance efficiency in blockchain-based agricultural traceability systems.

We investigate and discuss in detail the structure of the restricted singular value decomposition for a tensor triplet under t-product (T-RSVD). The algorithm is provided with a numerical example illustrating the main result. For applications, we consider color image watermarking processing with T-RSVD.

This study explores the Experience Economy dimensions within fishing tourism, adopting a data science perspective by employing web crawling for extensive data gathering on reviewer profiles from TripAdvisor. Utilizing Natural Language Processing (NLP) techniques, it scrutinizes the relationship between Experience Economy dimensions and user profiling aspects. Findings reveal "Entertainment" as the predominant dimension in tourist reviews, followed by "Aesthetic," "Educational," and "Escapist." Particularly notable are the frequent co-occurrences of "Entertainment"-"Aesthetic" and "Educational"-"Entertainment" pairs. The practical implications underscore the potential socioeconomic benefits of fishing tourism for local communities and fishermen, emphasizing the necessity for governmental support in terms of infrastructure, leadership, legislation, and financial backing to foster sustainable development in this sector. Notably, this research stands as a pioneering effort in its focus on Experience Economy dimensions and user profiling within the context of fishing tourism, drawing data from business pages and user profiles.

The textile processing sector is accountable for the extensive utilisation and pollution of freshwater resources. Due to heightened consumer awareness of environmental legislation regarding freshwater contamination, the textile sector is compelled to review and improve their current water consumption practices. Foan dyeing technique is a highly promising alternative that has the ability to contribute to a more sustainable future. This review paper discussed the current state of foam dyeing technology, highlighting its advantages in terms of re-duced consumption of water and energy, as well as minimal usage of dyes and chemicals compared to conventional methods. The foam configuration allows for more effective application of dyes. As a result, there is a decrease in dye consumption and a reduction in processing time. The process is environmen-tally sustainable since it significantly reduces water pollution. Furthermore, foam dyeing method consumes less energy due to its lower dying temperature need compared to conventional processing technology. Additionally, this paper highlights the continued investigation of foam dyeing on many types of textile substrates (such as fibres, yarns, and fabric) and compositions including cotton, polyester, and their mixtures. In addition, the techno-economic comparison of foam dyeing and conventional dyeing is also given. This review paper addi-tionally endorses the Sustainable Development Goals (SDG 6, clean water and sanitation) by examining the preservation of usable water and the decrease in wastewater discharge through foam dyeing technology. Lastly, the potential advantages of foam dyeing in terms of significantly reducing water consump-tion and the generation of waste in the textile industry were also addressed.

The objective of this study is to investigate the effect of the premixed ethanol ratio based on the same total heating value in-cylinder on the equivalence ratio distributions and the injected fuel droplet behavior in the cylinder of the RCCI engine. The spray simulation was conducted by dividing two-part. First, the spray validation simulations progressed to find the spray-influenced factor of the test injector. Next, the engine simulations were performed with the spray-influenced factor obtained from spray validation simulations to investigate the effect of the premixed ethanol ratio based on the same total heating value in-cylinder on the injected fuel atomization and the equivalence ratio distributions. The introduced total heating value was fixed at 595J based on the lower heating value of diesel 14mg. The heating value of the premixed ethanol ratio varied from 0% to 40% based on the same total heating value in-cylinder in steps of 10%. It was revealed that when the premixed ethanol ratio based on the same total heating value in-cylinder was increased, the spray tip penetration value was reduced from the time after 4deg of diesel injection start because of the short injection duration by the small amount of diesel fuel. The SMD value was also more enormous up to 32.58% with increasing the premixed ethanol ratio because of the low kinetic energy of the injected fuel by the short injection duration and the slow evaporation of the injected fuel by the low cylinder temperature.

Cloth wearing seems so natural that everyone is self-deemed knowledgeable and has some expert opinions about it. However to clearly explain the physics involved, and hence to make predictions for clothing design or selection, turns out as demonstrated below to be quite challenging even for experts. Cloth is a multiphased, porous and anisotropic material system and usually in multilayers. Unlike ordinary engineering heat transfer problems, the human body acts as an internal heat source in a clothing situation, thus forming a temperature gradient between body and ambient, and the sign of this gradient often changes as the ambient temperature varies. Our body also perspires and the sweat evaporates, an effective body cooling process via phase change. To bring all the variables into analysis quickly escalates into a formidable task. This work attempts to unravel the problem from a physics perspective, focusing on several rarely noticed yet critically important mechanisms involved so as to offer a clear and accurate depiction of the principles in clothing thermal comfort.

Introduction: Transportation logistics play a pivotal role in facilitating both individual mobility and supply chain operations on a global scale. However, conventional transportation systems have contributed significantly to urban congestion and environmental degradation. In response to these challenges, there is a growing momentum towards the adoption of intelligent transportation systems (ITS) and sustainable transportation solutions. This research aims to explore the potential of renewable energy sources to power electric vehicles (EVs) and flying automobiles, thereby accelerating the transition towards a low-carbon future. Objectives: The primary objectives of this research are as follows: - Investigate the role of renewable fuels in powering both EVs and flying cars to reduce reliance on fossil fuels and mitigate carbon emissions. - Analyze the dynamic growth and sustainability implications of advancements in battery technology and alternative renewable energy sources, such as Hydrogen Fuel Cells. - Evaluate the challenges and opportunities associated with the integration of flying vehicles into existing transportation infrastructure, focusing on safety, airspace control, and infrastructure development. - Review insights and guidance to stakeholders on promoting sustainable transportation solutions for EVs and flying cars through the utilization of renewable energy sources and the reduction of carbon emissions from the literature. Methodology: This research employs a mixed-method approach, combining literature review, and causal loop diagram analysis. The literature review provides a comprehensive understanding of current trends, challenges, and opportunities in sustainable transportation and renewable energy technologies. A causal loop diagram is utilized to visualize the dynamic interactions between various factors influencing the adoption of EVs and flying cars, including technological advancements, policy interventions, and market dynamics. Results and Discussion: The findings of this research highlight the significant potential of renewable energy sources, such as solar, wind, and hydrogen, in powering both EVs and flying cars. Advances in battery technology and hydrogen fuel cells are identified as key drivers in accelerating the transition towards sustainable transportation systems. However, challenges remain in terms of infrastructure development, safety regulations, and airspace management for flying vehicles. Nevertheless, there is a noticeable advancement in reducing carbon emissions and reliance on fossil fuels with the widespread adoption of EVs. By harnessing renewable energy and implementing effective policy measures, stakeholders might able to promote the widespread adoption of sustainable transportation solutions, thereby contributing to environmental protection and societal well-being. Conclusion: Literally, this research underscores the importance of sustainable transportation solutions in addressing urban congestion, environmental pollution, and energy security concerns. By leveraging renewable energy sources and embracing technological advancements, such as EVs and flying cars, stakeholders pave the way for a more sustainable and resilient transportation system. However, concerted efforts are needed to overcome existing challenges and ensure the successful integration of these technologies into existing infrastructure. Through collaborative partnerships and innovative initiatives, a low-carbon future for transportation logistics can be achieved, benefiting both the environment and society as a whole.

The textile and clothing (T&C) industry is not usually viewed as an exemplar of sustainable de-velopment and the circular economy, as the industry has hitherto made its products in linear fashion, with relatively little recycling of the finished goods. This article examines the industry’s approach to the core sustainability concept and the circular economy in particular, through a re-view of the available academic literature, evidence from corporate sustainability reports and websites, and feedback from an online survey of industry professionals. The role of digital technology deployment in engendering sustainability and the circular economy in the industry is also explored. The study finds that whilst sustainability is now firmly embedded at the strategic level in the vast majority of companies studied, attitudes towards the circular economy remain fickle. The use of digital technologies in support of sustainability objectives is also limited at present, but the article concludes that the need to meet compliance requirements and new cus-tomer perceptions of sustainability will speed the transition to circular economy activities, facili-tated by greater exploitation of digital technologies. Building upon the research findings, existing models and an initial conceptual framework, a simple operational model for initiating such a transition for small-to-medium sized enterprises in the T&C industry is put forward.

The fish supply chain (FSC) industry faces a significant challenge in terms of maintaining fish quality and authenticity throughout the chain. The main goal of modern FSC systems is tracking and tracing the fish product at each stage, from harvester to end customer, as well as assessing its quality and authenticity. Integrating FSC with new technologies, such as Blockchain (BC), Big Data, Artificial intelligence (AI), and Internet of Things (IoT), enhances fish product traceability, authenticity, visibility, and security. We propose a BC-based FSC framework that follows a layered architecture consisting of a SC layer, an IoT layer, and a BC layer. We integrate a new AI-based hand-held device, a Quality, Adulteration & Traceability (QAT) device, that can identify fish species and assess fish quality. We leverage the key features of BC and smart contracts, deployed over the Ethereum platform for the proposed framework integrated with QAT technology. Extensive validation of smart contracts is conducted to prove its practical feasibility.

In this work we present a study of impact of textile materials used in health care facilities on microbial colonization of textile surfaces. Polypropylene yarns doped with silver phosphate glass and zinc pyrithione were prepared and used for production of bed sheets and clothing for healthcare personnel. Subsequently measurements of airborne particles and viable microorganisms on given textiles were conducted in a private surgery clinic during 3 weeks comparing the counts of viable microorganisms before and after replacing of staff clothing and bedding on examination and surgical bed with said polypropylene cloth. In this study a significant reduction of viable airborne fungi and viable microorganisms on monitored textiles was observed by multiple methods.

This paper presents an overview of the smart electro-clothing systems (SeCSs) targeted at health monitoring, sports benefits, fitness tracking, and social activities. Technical features of the available SeCSs, covering both textile and electronic components, are thoroughly discussed and their applications in the industry and research purposes have been highlighted. In addition, it also presents the developments in the associated areas of wearable sensor systems and textile-based dry sensors. As it became evident during the literature research, such a review on SeCSs covering all relevant issues has not been presented before. This paper will be particularly helpful for new generation researchers investigating the design, development, function and comforts of the sensor integrated clothing materials.

Community co-creation is increasingly crucial to the building of sustainable societies. Communities must proactively and independently create value chains in the face of many wicked problems. However, practical frameworks and tools for facilitating community co-creation require further development. As such, for this paper, we propose a theoretical framework for analyzing community co-creation value chain mechanisms based on a narrative review of literature on Collective Impact, social impact assessment, and Community Capital from the perspective of collective impact, a framework with a fair amount of previous research. We argue for the importance of applying knowledge of social impact assessment, particularly for the collective impact conditions of common agenda and shared measurement system. We discuss its relationship with the Theory of Change and the use of systems thinking to mitigate the subjectivity and arbitrariness of design thinking. Furthermore, we emphasize the value of employing the community capital concept as a framework for analyzing interrelationships among elements. By integrating multiple concepts, we enhance the collective impact framework and outline potential avenues for future research on analyzing and effectively implementing co-creation value chain mechanism in a community-based approach.

Green innovation has become an important combination of high-quality economic growth and sustainable development of ecological environment. In this paper, the super-efficiency network SBM model is used to measure the two-stage green innovation efficiency of industrial science and technology R&D and achievement transformation in 30 provinces and cities from 2009 to 2019, and exploratory Data Analysis (ESDA) and spatial econometric model are used to investigate the spatial-temporal evolution characteristics and influencing factors of green innovation efficiency. The results show that: firstly, the overall efficiency of industrial green innovation is low, and the efficiency of scientific research and development and achievement transformation has experienced three stages of "upward-declining-revitalized period". The low efficiency of achievement transformation is an important factor hiding the improvement of the efficiency of industrial green innovation. Secondly, The industrial green innovation efficiency gradually increases from northwest to southeast, forming a centralized "line" and "block" distribution. The high efficiency area is still concentrated in the eastern coastal region, and the balanced development trend is obvious in the central and western regions. Finally, openness has a positive impact on the two-stage green innovation efficiency; Industrial structure and government investment in science and technology have a positive impact on the efficiency of science and technology research and development, but have no significant effect on the efficiency of achievement transformation. Enterprise size has a positive effect on achievement transformation efficiency, but has no significant effect on R&D efficiency. Environmental regulation has a positive impact on R&D efficiency and a negative impact on achievement transformation efficiency.

Background: Large-cell neuroendocrine carcinoma presents significant treatment challenges owing to its rarity and limited therapeutic options. The LANCE study was designed to explore the survival benefits of incorporating atezolizumab in chemotherapy for metastatic LCNEC. Methods: In this non-randomized study, patients with metastatic LCNEC were treated with ei-ther standard chemotherapy plus atezolizumab or standard chemotherapy alone. The primary outcomes measured were progression-free survival (PFS) and overall survival (OS), with an ex-ploratory analysis of miR375 in plasma as a potential biomarker. Results: Of the 22 screened patients, 17 met the inclusion criteria and were stratified into the atezolizumab and chemotherapy (n=10) or chemotherapy alone(n=7) groups. After a median follow-up of 23.3 months, the 12-month survival rate for the atezolizumab group was 57.1% (95% CI: 32.6%-100%) and 45.7% at 24 months (95% CI: 22.4%-93.2%). In contrast, the chemotherapy group had a 14.3% survival rate at both 12 and 24 months (95% CI: 2.33%-87.7%). The log-rank test for survival showed a statistically significant difference in the atezolizumab-treated group (chi-squared = 4, df = 1, p = 0.04). A non-significant correlation was found between disease pro-gression and elevated levels of miR375. Conclusions: This pilot study suggests that atezolizumab combined with chemotherapy may be effective in treating metastatic LCNEC. The non-significant correlation between plasma miR375 levels and disease progression suggests its biomarker potential, warranting further validation research.

Tertiary lymphoid structures (TLSs) have become the focus of antitumor immunity. However, the prognostic significance of TLSs in epithelial ovarian cancer (EOC) treated with primary debulking surgery (PDS) or interval debulking surgery (IDS) remains unelucidated. This retrospective study examined the prognostic value of TLSs in tumor tissues obtained during PDS and IDS. Pathological specimens were collected from patients with EOC who underwent PDS or IDS between 2017 and 2020 at the National Cancer Center Hospital East. The correlation of tumor-infiltrating lymphocyte frequency, TLS presence, and PD-L1 expression with progression-free survival (PFS) and overall survival (OS) and the correlation between TLS and PD-L1 expression were analyzed. Overall, 25 specimens (15 from PDS and 10 from IDS) were analyzed. The presence of TLS was associated with a significantly longer OS in patients who underwent PDS but not in patients who underwent IDS. No correlation was identified between TLS and PFS in patients with PDS or with IDS. However, TLS was positively correlated with PD-L1 positivity. The prognostic impact of TLS, specifically in pre-chemotherapy specimens, and a positive correlation between TLS and PD-L1 indicate the potential of TLS as a meaningful biomarker for understanding antitumor immunity and developing immunotherapy for EOC.

Today, mechanical tracking systems have been downsized to allow them to be used in the field of airborne laser communications and in the military domain. Risley systems are used for this purpose, which work by directing a beam of light to a given target point, this procedure is commonly known as the inverse problem. In this paper, an analytical method, the geometric method, has been designed and developed to determine the beam steering in a Risley system and solve the inverse problem. The method focuses on different geometric shapes, like circumference or ellipse, that are described when the beam passes through the second prism. The accuracy and efficiency of the geometric method has been analysed and found to be faster than the two-step method. Furthermore, the geometric method has been implemented in an iterative process and an accuracy of up to 1 pm has been achieved. This high accuracy would allow the geometric method to be applied in fields such as lithography, stereolithography or 3D printers.

Large quantities of clothing are routinely discarded, ending up in landfills that contribute to the environmental crisis; hence, it is worthwhile investigating how to dispose of this waste in a sustainable way. This study considered environmental values and prosocial behavior from a behaviorism theory. The aim was to set up an environmental protection model for the sustainable disposal of consumer clothing. A structural equation modeling analysis of 407 undergraduate and postgraduate consumer data in Taiwan revealed that consumers’ choice to donate clothing was influenced by environmental values and prosocial behaviors. Clothing resale was influenced by the factor of prosocial behavior. However, prosocial consumers used other disposal patterns instead of resale. Clothing reuse was not influenced by either environmental values or prosocial behavior. The results indicated that environmental values and prosocial behavior did in fact influence consumers’ choices regarding clothing donation. However, prosocial consumers used other disposal patterns instead of resale. Behaviorism theory model is effective in analyzing the factors influencing sustainable clothing disposal. To face clothing waste issues, one can intensify traditional values of industriousness and thriftiness, of compassion and sympathy to others, to accelerate the promotion of the sustainable disposal of clothing.

Nanotechnology has become a popular topic in agricultural and animal research, generating sig-nificant global interest. Nanoparticles (NPs)-enabled agriculture and animal husbandry (AHs) products have three main principles: crop production, protection, and nutrient enrichment. Re-search on this topic has grown exponentially in recent years, with an increasing number of peer-reviewed literature and patents on NPs-enabled agriculture and AH products. This study examines and collects data on the various applications of NPs-enabled agricultural products for crop production, protection, and livestock improvement from the core nanotechnological database. The search returned several types of NPs and products used in agriculture and AH, countries that utilize these products at a commercial level, and analysis of these data by phyton, R-statistical software. Our findings show remarkable growth of nanotechnology in agriculture, AH, and re-search fields for future sustainability goals in the era of climate change

This article explores the emerging concept of atrial myopathy (AM) and its potential role as a risk factor for stroke and dementia, both independently and in association with atrial fibrillation (AF). AM refers to structural and functional abnormalities of the atria, potentially causing blood clots formation and their subsequent embolization even in patients without AF. Echocardiography, particularly Left Atrial (LA) strain analysis, is a promising non-invasive tool for AM evaluation and might offer additional risk stratification beyond the established CHADS2-VASc score, potentially impacting anticoagulation decisions. By understanding AM and utilizing advanced imaging techniques like LA strain, clinicians can achieve a more comprehensive understanding of thromboembolic risk in specific patient groups. Integrating LA strain analysis into routine clinical practice holds promise for improved patient management and targeted therapies, allowing for better risk stratification in AF patients. However, standardized definitions and diagnostic criteria for AM are essential for consistent evaluation and research. Further studies are needed to explore the efficacy and safety of anticoagulation in AM patients without AF.

The rapid development of China’s textile industry leads to consumption and pollution of large volumes of water. Therefore, the textile industry has been the focus of water conservation and waste reduction in China’s 13th Five-Year Plan (2016–2020). The premise of sustainable development is to achieve decoupling of economic growth from water consumption and wastewater discharge. In this work, changes in blue water (water consumption), grey water (water pollutants), and water footprints of the textile industry from 2001 to 2014 were calculated. The relationship between water footprint and economic growth was then examined using the Tapio decoupling model. Furthermore, factors influencing water footprint were determined through logarithmic mean Divisia index (LMDI) method. Results show that the water footprint of China’s textile industry has strongly decoupled for five years (2002, 2006, 2008, 2011, and 2013) and weakly decoupled for four years (2002, 2007, 2009, and 2010). A decoupling trend occurred during 2001–2014, but a steady stage of decoupling has not been achieved yet. Based on the decomposition analysis, the total water footprint is mainly increased by production scale and inhibited by the technology. In addition, the effect of industrial structure adjustment is relatively weak.

There is a limited data on variation of microbial hygiene load in dairy products during different seasons. In this study, a longitudinal design with a simple random sampling method was used to collect data in the dry season (January to April) and wet season (June to August). A total of 448 milk and cottage samples were collected from 3 regions. Enumeration of total aerobic mesophilic bacteria (APC), total coliforms (TCC), and Escherichia coli (EC) was performed according to standard methods. Independent t-test were employed to assess the significant variation at (p<0.05) between the two seasons. The cumulative result of APC of 7.61 log cfu/ml and g and TCC of 3.50 log cfu/ml in the dry season were significantly higher than wet season of 7.15 log cfu/ml and 2.49 log cfu/ml, respectively. Whereas generic E. coli count (EC) was significantly higher in the wet season (0.70 log cfu/ml and g) than that in the dry season (0.40 log cfu/ml and g). The results of hygienic indicator microbial load were significantly varied with season. Hence, a sustainable awareness creation on hygienic milk production and handling that comprehend seasonal influence should be implemented to improve the safety of milk.

This qualitative study explores the role of supply chain partnerships in enhancing brand value through collaborative marketing efforts. By analyzing diverse cases from industries including consumer electronics, apparel, automotive, and food and beverage, the research examines how different forms of partnerships—strategic alliances, co-marketing, joint ventures, and supplier integrations—contribute to brand value. The study employed a multiple case study design, incorporating semi-structured interviews, document analysis, and participant observations to gather data. The findings reveal that these partnerships enable companies to leverage complementary strengths, resulting in enhanced innovation, product quality, sustainability, market reach, and ethical standards. Collaborative marketing strategies such as joint product launches, sustainable branding campaigns, and co-developed customer programs are identified as key drivers of brand value, effectively increasing brand awareness, customer loyalty, market share, and perceived quality. Despite challenges like coordination complexity, goal misalignment, cultural differences, and cost management issues, the benefits realized—such as improved brand image, faster time-to-market, and reduced costs—demonstrate the substantial value of effective supply chain partnerships. The study underscores the importance of strategic alignment between supply chain activities and brand objectives, highlighting that successful partnerships foster deeper consumer engagement and stronger market positions. This research provides actionable insights for companies seeking to optimize their supply chain collaborations to enhance brand value, offering a foundation for future studies and practical applications in supply chain management and marketing. The findings contribute to a deeper understanding of how supply chain partnerships can be strategically managed to drive brand excellence in a competitive market environment.

The underperforming state of agricultural sector especially in Sub Saharan Africa, Nigeria inclusive is largely due to gender inequities in opportunities which undermine the sustainable and inclusive agricultural development. Agricultural value chain development requires equity in opportunities among men and women along the value chain, and this can only be done through interventions recommended by gender equity studies. The study analyzed gender equity opportunities, and youth engagement in rice value chains in southeast Nigeria. The multistage sampling technique was used in selecting the sample. The sample size consists of 476 youth rice value chain actors randomly selected from 48 villages across three states in South-East Nigeria. The data were analyzed using Modified Gender Equity Index (MGEI), and value addition models. The results from MGEI show that the level of gender equity opportunities for youth rice producers, processors and marketers were -0.21, -0.21 and -0.04 respectively, indicating inequity against the female youth. The overall value-added per ton by the male youth actors was ₦52,281 and ₦52,229 for female youth actors. The share of the value-added by male youth producers, processors and marketers were 51.65%, 49.41% and 47.78% while the share for female youth were 48.38%, 50.59% and 52.22%, respectively. The major constraints to youth engagement in rice value chain include lack of capital to start up, lack of access to credit, drought, lack of access to better technology, high cost of hiring machines, lack of technical skills, and stressful nature of rice value chain. It was recommended that Policies and interventions that ensure equal access to resources, opportunities, and decision-making power for both male and female youth actors should be implemented through targeted training programmes, awareness campaigns and capacity-building initiatives that promote gender equality.

Keywords: Cocoa value chain; Fair trade; Chocolate; Sustainable development; SDGs

The correct selection of the value of p is a complex and iterative procedure that requires experience in the interpretation of the obtained interpolated maps. Inverse Distance Weighting is a method applied to the porosities of the K and L hydrocarbon reservoirs, discovered in the Neogene (Lower Pontian) subsurface sandstones in the northern Croatia (Pannonian Basin System). They represent small and large data samples. Also a standard statistical analysis of the data was made, followed by the qualitative-quantitative analysis of the maps, based on the selection of different values of the power distance exponent (p-value) for the K and L reservoirs maps. According to the qualitative analysis, for a small data set, p-value could be set on 1 or 2 giving the most optimal result, while for a large data set, a p value of 3 and 4 could be applied. By quantitative analysis, for the case of small data p=2 is recommended, resulting in a root mean square error value of 0.03458, a mean absolute error of 0.02013 and a median absolute deviation of 0.00546. Oppositely, a p-value of 3 and 4 is selected as appropriate for a large data set, with root mean square errors of 0.02435 and 0.02437, mean square errors of 0.01582 and 0.01509 and median absolute deviations 0.00896 and 0.00444. Eventually for a small data set, it is recommended to use a p-value of 2, and for a large data set, a p-value of 3 or 4.

A The guinea pig value chain in Jauja, Peru, has been developed through the application of productive projects, institutional strengthening and implementation of the principles of responsible investment in agriculture and food systems (CFS-RAI). The actors in this chain have been showing economic improvements, representativeness and participation, characteristics that make them the key human capital for development. To improve the performance of the actors in the sustainable rural development of the territory of Jauja, Peru, the research carried out an evaluation of the competencies and capacities for project management in 46 actors linked to the business programme on the CFS-RAI Principles, representing 1,094 people in the guinea pig value chain in Jauja, using the Working With People (WWP) model and empirical instruments based on the Octagon method, International Project Management Association (IPMA) competencies, performance evaluation carried out by experts, attitudinal evaluation and the Business Model Canvas. The results have helped to structure the actors of the value chain, who show an intermediate mastery of project management competencies (2.73/5), institutional capacities in development (2.89/7) and a growing organizational management performance (26.2/100). In addition, trust and proactivity have been generated among the actors in the chain, with an interest in continuing with the implementation of the CFS-RAI Principles in order to achieve sustainability in their productive projects with commercial innovation. The results have allowed us to generate the design of an innovative programme for the development of competencies, which balances the three dimensions of IPMA competencies (perspective, person and practice) in connection with the CFS-RAI Principles. Both processes complement the strengthening of human capital in agrifood value chains through sustainable project management and contributing to sustainable development in the region.

The study examines projected changes in dry- and wet-spell probabilities in West Africa using a Markov chain approach. Four simulations of regional climate models from the CORDEX-Africa program were used to analyze projected changes in intraseasonal variability. The results show an increase in the probability of having a dry day, a dry day preceding a wet day and a dry day preceding a dry day, and a decrease in the probability of wet days in the Sahel region under anthropogenic forcing scenarios RCP4.5 and RCP8.5. The decrease in wet days is stronger in the far future and under the RCP8.5 scenario (up to -30%). The study also finds that the probability of consecutive dry days (lasting at least 7 days and 10 days) is expected to increase in the Western Sahel, the Central Sahel, and the Sudanian Area under both scenarios, with stronger increases in the RCP8.5 scenario. In contrast, the decrease is expected over the Guinea Coast, with the changes more important under the RCP4.5. These changes in dry- and wet-spell probabilities are important for water management decisions and risk reduction in the energy and agricultural sectors. The study also highlights the need for decision-makers to implement mitigation and adaptation policies to minimize the adverse effects of climate change.

A new clothing resistance model is described and applied to characterize the human thermal and moisture climates. The climate was described by the thermal (rcl,t) and evap-orative (rcl,e) resistances of comfortable, imaginary clothing. The key input variable of the model is the rate of sweating (λEsw). Since sweating is an individual-specific process, the model applies to the individual. The observations were carried out by a single individual in Martonvásár (Hungarian lowland, Central Europe) in the summer of 2023 and the winter of 2024. During the observations, the observer walked at a speed of 1.1-1.7 ms-1 in weather-appropriate clothing. Among the results, we would highlight the following: Dur-ing large environmental heat surpluses, the rcl,t values were found to be between 0.1-0.5 clo-t (clo-t = 0.155 m2·℃·W-1), while the rcl,e values fell between 0.4-0.8 clo-e (clo-e = 0.155 m2·hPa·W-1). The values of the parameters close to 0 were caused by intense sweating (λEsw > 200 Wm-2). The applicability of the model is limited and largely depends on the rela-tionship between λEsw and the metabolic heat flux density.

In the past few years, cloud-based additive manufacturing has shown its application and potential in industries. For this reason, when the demand for cloud-based additive products increases, efficient scheduling of related tasks becomes more important to achieve optimized duration. This research proposes a Heuristic Scheduling Algorithm (HSA) for use in Cloud-Based Additive Manufacturing (CBAM) with an approach to Critical Chain Buffer Management (CC/BM). This research aims to schedule and optimize the time in cloud-based additive manufacturing, in addition to the parts production process, it also includes the steps of receiving online orders and informing the manufacturing unit and sending them to the customer. The HSA proposed in this research consists of three phases 1- Buffer sizing, 2- Additive manufacturing and logistics scheduling, and 3- Buffer controlling. To evaluate, the performance of the algorithm is simulated. The finding shows that the proposed HAS can effectively solve the CBAM scheduling problem.

This paper developed a new theory for supply chain architecture, and engineering design that enables integration of the business and supply chain strategies. The architecture starts with individual supply chain participants and derives insights into the complex and abstract concept of green-field integration design. The paper presented a conceptual system for depicting the interactions between business and supply chain strategy engineering. The system examines the decisions made when engineering the business strategy, with regards to the supply chain design. The system derived with a new understanding of how strategies are integrated, and what are the implications for engineering successful strategies. The study revealed that supply chain design is not considered in great detail before architecting the business strategies. Thus, companies consequentially experience supply chain problems that are likely to be detrimental to the growth potentials. The paper also derived with the findings that proactive and pre-emptive involvement of supply chain participants in the strategy engineering process, would lead to a more robust strategic design.

The high genetic diversity of the tomato and its high micronutrient content make this fruit very interesting from an economic and nutritional point of view. The genetic erosion suffered by this crop, due to breeding objectives based on yield and marketing, makes it necessary to return to the origins in search of the nutritional and organoleptic quality lost in traditional varieties. In this study, the agronomic, physical, organoleptic and nutritional characteristics of eighteen F1 hybrids obtained by crossing fourteen traditional varieties, previously selected for their quality, were studied to select genotypes of superior quality that could be candidates for new. All parameters studied were strongly influenced by genotype, showing a wide range between cultivars. Principal Component Analysis revealed the characteristics of each hybrid that made it stand out from the others. Some hybrids (H3, H4, and H6) stand out because of their high concentration of active compounds, others (H16, H15, H10, H17, H9, and H11) because of agronomic performance and high content of β-carotene, and H5 was the only one to contain chlorophyll in their ripe fruits. Finally, the evaluation index allowed the selection of five hybrids with interesting characteristics, combining good yield performance and high quality

The study was conducted to evaluate the agronomic performance, forage yield, and nutritive values of Desho grass varieties under supplementary irrigation at Dambi Dollo University experimental site, Western Ethiopia. Three Desho grass varieties (Areka /DZF#590, Kindu kosha-1/DZF #591, and Kulumsa /DZF #592) were arranged in randomized complete block design (RCBD) with three replications. The CROPWAT 8.0 model, local climate data, forage data, and soil data were used to determine Desho grass water requirements and irrigation schedules. The agronomic parameters, yield, chemical composition, and in vitro digestibility of the feed samples at standardization cut were determined following the standard procedures. The results showed significant differences (p

Abstract Plant diseases are responsible for over 10% loss in global food production and have serious impacts on world-wide food security across several countries. Amongst these diseases, those caused by viroids are highly significant, accounting for extensive damage to crops every year and pose a major economic threat to agricultural crops. Combined infections with viroids, plant viruses and their satellites further exacerbate the situation. Vector transmission of viroids necessitates the use of pesticides, thus incurring high costs in addition to eliciting several detrimental effects on the ecosystem due to the noxious outcomes of pesticide use. The current review addresses the major economic impacts of viroids on crops, costs to the world economy and impacts on regions, farmers and consumers in addition to describing remediation measures to mitigate the losses caused by these subviral agents. Also described are issues relating to the pros and cons of pesticide use, the compelling need towards sustainable agricultrual practices while reducing pesticide use. In particular, the role of RNAi and genome editing technologies towards amelioration of agricultural loss is discussed.

Textile industry is one of the major industries responsible for environmental pollution globally. This is mainly due to the use of synthetic dyes, toxic ingredients and solvents for dy-ing/treatments/protocols of textiles. Replacement of those non ecofriendly ingredients would be a very challenging target to develop novel sustainable textile dying strategies. Using biobased and bioactive pigments, antibacterial ingredients and especially natural solvents are recently pointed out as substances to included in the related formulations. In this study the dyeing ability of the crude gel prodigiosin produced by non-pathogenic bacteria Serratia plymuthica as a natural pigment was investigated on various multifiber fabrics at different condition (temperature and pH) and by using salts (NaOH and Na2S2O4) and alternative mordants (a conventional: FeSO4 and a new bio-mordant: L-Cysteine (L-Cys)) in the recipes with different compositions and especially replacing of organic solvent with a new type of gel-based Choline chloride (ChCl) : Lactic acid (LA) (1 : 2) deep eutectic solvents (DES) as a dyeing medium. For determination of the dying process performances, the color strength (K/S value) of dyed fabric and the dyeing equalization (dE) parameters were evaluated. The fastness properties of the dyed fabrics which displayed as a higher K/S value and good dE were evaluated. The nylon fabrics dyed with 3.0% owf L-Cys at pH = 8.3 improved the color fastness to washing, while the gel-based ChCl : LA (1 : 2) DES dyebath provided a better color fastness to light. Moreover, the nylon fabrics under these conditions exhibited remarkable anti-microbial activity against Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa (P. aeruginosa). As conclusion, the use of the crude gel prodigiosin pigment revealed an advantageous ability to dye the textile materials, responding to consumers' demand for more ecological and sustainable products. Furthermore, the natural reducing agent L-Cys, never tested before as a bio-mordant, and the use of gel-based DES as a dyeing medium demonstrated enhanced colorimetric and antibacterial properties on dyed nylon with crude gel prodigiosin pigment.