A comprehensive kinetic model of the Fischer-Tropsch synthesis (FTS) is developed in a fixed bed reactor under operating conditions (temperature, 230–235°C, pressure, 20–25 bar, gas hourly space velocity, 4000–5000 cm³(STP)/h/g_catalyst ,H₂/CO feed molar ratio, 2.1) over a Co based catalyst. Reaction rate equations based on Eley-Rideal (ER) type model for initiation step and Langmuir-Hinshelwood-Hougen-Watson (LHHW) type model for propagation and termination steps of the FTS reactions have been considered and the readsorption of olefins were taken into account. The model that was reported in the literature was modified in order to explain many significant deviations from the ASF distribution. Optimum parameters have been obtained by Genetic Algorithms (GA). The calculated activation energies to produce n-paraffins and 1-olefins were in the range of 82.24 to 90.68 kJ/mol and 100.66 to 105.24 kJ/mol, respectively. The hydrocarbon distribution in FTS reactions was satisfactorily predicted particularly for paraffins.

Managing a portfolio whose value closely tracks an index by trading only in a subset of the index constituents involves an NP-hard optimisation problem. In the prior literature, it has been suggested to solve this problem using sequential Monte Carlo (SMC, a.k.a. particle filter) methods. However, this literature does not take transaction costs into account, although transaction costs are the primary motivation for attempting to replicate the index by trading in a subset, rather than the full set of index constituents. This paper extends the SMC approach to index tracking to allow for proportional transaction costs and implements this extended method on empirical data for a variety stock indices. In addition to providing a more practically useful tracking strategy by allowing for transaction costs, we find that including a penalty for transaction costs in the optimisation objective can actually lead to better tracking performance.

The affinity constant, also known as the equilibrium constant, binding constant, equilibrium association constant, or the reciprocal value, the equilibrium dissociation constant (K_d), can be considered as one of the most important characteristics for any antibody-antigen pair. Many methods based on different technologies have been proposed and used to determine this value. However, since a very large number of publications and commercial datasheets do not include this information, significant obstacles in performing such measurements seem to exist. In other cases where such data are reported, the results have often proved to be unreliable. This situation may indicate that most of the technologies available today require a high level of expertise that does not seem to be available in many laboratories. In this paper, we present a simple approach based on standard immunoassay technology that is easy and quick to perform. It relies on the effect that the molar IC₅₀ approaches the K_d value in the case of infinitely small concentrations of the reagent concentrations. A two-dimensional dilution of the reagents leads to an asymptotic convergence to K_d. The approach has some similarity to the well-known checkerboard titration used for the optimization of immunoassays. A well-known antibody against the FLAG peptide, clone M2, was used as a model system and the results were compared with other methods. This approach could be used in any case where a competitive assay is available or can be developed. The determination of an affinity constant should belong to the crucial parameters in any quality control of antibody-related products and assays and should be mandatory in papers using immunochemical protocols.

Since the discovery of transposable elements (TEs) in Maize in the 1940s by Barbara McClintock [1] transposable elements have been described as junk, as selfish elements with no benefit to the host, and more recently as major determinants of genome structure and genome evolution. TEs are DNA sequences that are capable of moving to new sites in the genome and make additional copies while doing so. To limit the propagation of TEs, host silencing mechanisms are directed at transposon-encoded genes that are required for mobilization. The mutagenic properties of TEs, the potential of TEs to form new genes and affect gene expression, together with the host silencing mechanisms shape eukaryotic genomes and drive genome evolution. While TEs constitute more than half of the genome in many higher eukaryotes, transposable elements in the nematode C. ele-gans form a relatively small proportion of genome, about 15% [2]. Genetic studies of transposon silencing and the discovery of RNAi in C. elegans, propelled C. elegans to the forefront of studies of RNA-based mechanisms that silence TEs. Here, I will review the transposable elements that are present and active in the C. elegans genome, and the host defense mechanisms that silence these elements.

Introduction: maxillary hypoplasia and mandibular asymmetry may be corrected with orthognathic surgery at the completion of growth. Many patients require segmental Le Fort I osteotomies to obtain the most stable results. Unfortunately, if Invisalign is chosen for pre-surgical preparation, ClinCheck © software does not allow for prediction when these complex surgeries are planned. The objective of this paper was to show the potential of aligners beyond its software in most complex cases like multiple-piece maxillary osteotomies in cleft and non-cleft patients. Method: Thirteen patients who underwent pre-surgical treatment with clear aligners-Invisalign (study group) were matched in terms of diagnosis, surgical procedure, and orthodontic complexity with thirteen patients treated using fixed appliances (control group). A technique based on simple superimposition was devised to enhance the software for creating a suitable occlusion for segmental pre-surgical treatments. Virtual curves following the lower arch were employed to guide the correct pre-surgical positions of the upper teeth. The amount of impressions required in both groups to achieve satisfactory pre-surgical alignment of the segmented arches was compared. Results: one or no refinement phase were needed in the Invisalign group to reach an acceptable pre-surgical occlusion while the amount of pre-surgical impressions taken in order to reach adequate coordination with fixed appliance treatment was slightly higher. The average overall treatment duration did not show a statistically significant variation between the groups. Conclusions: it appears that clear aligner could serve as an effective treatment for individuals with skeletal discrepancies, including cleft and craniofacial anomalies, necessitating segmental Le Fort I osteotomies when aided by the suggested superimposition approach during digital pre-surgical movement simulations. More sophisticated softwares will certainly be implemented in the future.

As revealed by the recent resurgence of yellow fever virus (YFV) activity in the tropical regions of Africa and South America, YFV control measures need urgent rethinking. Over the last decade, most reported outbreaks occurred in, or eventually reached, areas of low vaccination coverage but suitable for virus transmission, with an unprecedented risk of expansion to densely populated territories in Africa, South America and Asia. As reflected in the World Health Organization’s initiative launched in 2017, it is high time to strengthen epidemiological surveillance to monitor accurately, viral dissemination and redefine vaccination recommendation areas. Vector-control and immunisation measures need to be adapted and vaccine manufacturing must be reconciled with an increasing demand. We will have to face more YF cases in the upcoming years hence, improving disease management through the development of efficient treatments will prove most beneficial. Undoubtedly, these developments will require in-depth descriptions of YFV biology at molecular, physiological and ecological levels. This second section of the two-part review describes the current state of knowledge and gaps regarding the molecular biology of YFV, along with an overview of the tools that can be used to manage the disease at the individual, local and global levels.

In this paper, we relate Poisson’s summation formula to Heisenberg’s uncertainty principle. They both express Fourier dualities within the space of tempered distributions and these dualities are furthermore the inverses of one another. While Poisson’s summation formula expresses a duality between discretization and periodization, Heisenberg’s uncertainty principle expresses a duality between regularization and localization. We define regularization and localization on generalized functions and show that the Fourier transform of regular functions are local functions and, vice versa, the Fourier transform of local functions are regular functions.

With an increase in energy consumption globally, Fischer-Tropsch (FT) synthesis is a good alternative for producing fuels and chemicals from coal, natural gas or biomass. Among them, coal to liquids has been put into production in countries that have large coal reserves. In this process, Fe-based catalysts are commonly used due to their earth abundance, comparatively wide operation range and ready availability to handle low H2/CO ratio from coal. Despite their extensive applications, the kinetic and mechanistic understandings of Fe carburization and FT reaction on Fe-carbides are relatively limited due to the complexity of phase composition of the applied catalysts. This review summarizes the current state of knowledge of FT synthesis on Fe-carbide with an emphasis on underlying mechanism. Specifically, the employment of model catalyst, such as Raney-Fe, could provide a convenient way to furnish kinetic information regarding Fe carburization and subsequent FT reaction. A major challenge for further understanding catalytic reactions occurring at the Fe-carbide surface is correlating FT activity and selectivity to specific active site. To address this issue, the advancements of both DFT calculations and surface science techniques are highly demanded.

Synthetic fuels play an important role in the defossilization of future aviation transport. To reduce the ecological impact of remote airports due to long range transportation of kerosene, a decentralized on-site-production of synthetic paraffinic kerosene is applicable, preferably as near-drop-in fuel or alternatively as blend. One possible solution for such a production of synthetic kerosene is the Power-to-Liquid process. The basic development of a simplified plant layout addressing the specific challenges of a decentralized kerosene production which differ from most current approaches for infrastructural well-connected regions is described. The decisive influence of the Fischer-Tropsch synthesis on the PtL process is shown by means of a steady-state reactor model which was developed in Python and serves as basis for further development of a modular environment able to represent entire process chains. The reactor model is based on reaction kinetics according current literature. The effects of adjustments of the main operation parameters on the reactor behavior are evaluated and the impacts on up- and downstream processes are described. The results prove the governing influence of the Fischer-Tropsch reactor on the PtL process and show its flexibility regarding the desired product fraction output, which makes it an appropriate solution for a decentralized kerosene production.

One important goal of research on heterogeneous catalysis for Fischer Tropsch synthesis (FTS) is to understand the connection linking catalyst morphology and its activity. Development of these effective catalysts highlights the potential for understanding the effectiveness of promoted supported catalysts and revealing their complex and dynamic effects in FTS. The metal-support interaction (MSI) is influenced by the physicochemical and textural features provided by the modified support and can directly influence the sizes of active metal crystallites, reactants and/or products mass transfer, dispersion, mechanical strength, stability and consequently the adsorption-desorption characteristics of the catalyst. Herein, this article explores the general strategies for modifying silica supports (achieved through doping, coating, or promoting the support or support precursor) and how these strategies can be manipulated to further alter catalyst performance and product selectivity by enhancing the amount of active metal species and improving the intrinsic turnover frequency (TOF). Furthermore, the review emphasises a new strategy (the inverse model of the silica support modification) aiming at overcoming the challenges posed by active metal coating or coverage, as well as pore blockages by promoters that occur during conventional preparation of promoted silica supported FT catalysts.

In humans, finely tuned gamma synchronization (60-90 Hz) rapidly appears at movement onset in a motor control network involving primary motor cortex, the basals ganglia and motor thalamus. Yet the functional consequences of brief movement-related synchronization are still unclear. Distinct synchronization phenomena have also been linked to different forms of motor inhibition, including relaxing antagonist muscles, rapid movement interruption and stabilizing network dynamics for sustained contractions. Here I will introduce detailed hypotheses about how intra- and inter-site synchronization could interact with firing rate changes in different parts of the network to enable flexible action control. The here proposed cause-and-effect relationships shine a spotlight on potential key mechanisms of cortico-basal ganglia-thalamo-cortical communication. Confirming or revising these hypotheses will be critical in understanding the neuronal basis of flexible movement initiation, invigoration and inhibition. Ultimately, the study of more complex cognitive phenomena will also become more tractable once we understand the neuronal mechanisms underlying behavioural readouts.

In previous studies we used Laurent Schwartz’ theory of distributions to rigorously introduce discretizations and periodizations on tempered distributions. These results are now used in this study to derive a validity statement for four interlinking formulas. They are variants of Poisson’s Summation Formula and connect four commonly defined Fourier transforms to one another, the integral Fourier transform, the Discrete-Time Fourier Transform (DTFT), the Discrete Fourier Transform (DFT) and the Integral Fourier transform for periodic functions—used to analyze Fourier series. We prove that under certain conditions, these four Fourier transforms become particular cases of the Fourier transform in the tempered distributions sense. We first derive four interlinking formulas from four definitions of the Fourier transform pure symbolically. Then, using our previous results, we specify three conditions for the validity of these formulas in the tempered distributions sense.

In previous studies we found that generalized functions can be smooth, discrete, periodic or discrete periodic and they can either be local or global and they are regular or generalized functions. We also saw that these properties were related to Poisson’s summation formula on one hand and to Heisenberg’s uncertainty principle on the other. In this paper, we interlink these studies and show that scalars (real or complex numbers) considered as trivial functions are discrete and periodic, local and global as well as regular and generalized, simultaneously. However, this is also a paradox because it means that Dirac’s δ and 1 (its Fourier transform) coincide. They both are unity. We show that δ and 1 coincide in the sense of scalars (real or complex numbers) but they differ in the sense of (generalized) functions. This result can moreover be related to Max Born’s principle of reciprocity. It also answers an open question in present-day quantum mechanics because it means that the Dirac delta squared is simply delta.

Targeted cancer therapy has grown exponentially in the last decade, representing the largest frontier in the modern concept of precision medicine. This renaissance is largely due to our rapidly evolving ability to biochemically harness our immune systems to target cancer-specific antigens. Combined with an increasing armamentarium of surgical and non-invasive techniques for cancer mitigation we have upgraded cancer therapy from a non-specific assault on cell-division to a multi-modal, targeted approach. This renaissance has resulted in an increase in the perioperative footprint of patients with advanced cancer. The scope of the perioperative clinician has evolved from one of passive/reactive management of complications to a proactive approach that starts in the preoperative optimization phase and continues into the postoperative period. The perioperative world should not exist in a silo, and thus involvement of the oncology team is paramount. To provide safe oncologic care, it is essential to be up to date in newer cancer therapies, lest we act on erroneous and/or outdated information. Oncologists should weigh in on immune status, recent chemotherapeutic exposures, and potentially evolving toxicities. These might involve critical changes to perioperative infectious prophylaxis, steroid administration, and coagulopathy management. First, patients living beyond the typical life-expectancy for their cancer will carry a high burden of cancer-related downstream effects. General metabolic issues will include malnutrition, cachexia, and gastric outlet obstruction. Severe protein-calorie malnutrition, as well as hepatic and renal dysfunction can impact the metabolism and clearance of drugs. The cardiovascular, endocrinologic, pulmonary, and central nervous system implications of new cancer therapies will be discussed extensively below. Second, we have to enhance our ability to manage a cancer population who may be experiencing increasing novel chemotherapeutic toxicities. Newer agents differ from historical agents, which were blunt-force tools aimed at nonspecific destruction of cell-division. These drugs are efficacious but physiologically costly. Newer immunogenic therapies have a slightly improved acute safety profile, and a more complex chronic toxicity profile that may be overt or insidious. Chronic toxicities can present overtly or as a smoldering undertone to other active medical conditions such as sepsis, pneumonia, failure to thrive, or renal failure. The new therapies discussed in this review occur in the context of an overall increasingly multi-faceted cancer care machine. An example is screening for esophageal cancer in patients with Barrett's esophagus, or periodic chest CTs for patients with a strong history of tobacco use. These interventions are more likely to detect disease while it is still resectable, and resections will commonly accompany neo-adjuvant therapy. These approaches commonly involve new immunotherapies whose efficacy is higher-yield with a lower disease burden. In a recent example, the immune-checkpoint inhibitors (ICIs) ipilimumab plus nivolumab have significantly increased survival rate for squamous cell esophageal cancer when combined with standard chemotherapy. Surgical resection has evolved to one that often accompanies neoadjuvant chemo and radiation. The increasing efficacy of this approach may de-necessitate many major resections, and increase the number of sub-anatomic resections and minimally invasive procedures. Improved techniques - notably for hepatectomy, whipple procedure, prostatectomy, nephrectomy - have increased the safety profile and decreased the perioperative physiologic burden. This has enabled a broader subset of patients (due to cancer burden or due to medical comorbidities) to qualify for the operation, and increased the involvement of anesthesia and their perioperative services. With an increase in surgical candidacy comes an increase in post-surgical complications, and post-surgical maintenance such as drains, embolizations, imaging studies, etc. In the non-OR anesthesia realm, there have been considerable advancements in cancer “micro-treatments” such as hepatic metastasis embolization, tumor ablation, and peri-tumor vascular embolization. There are an ever-increasing number of IR-guided embolizations for bleeding tumors, aspiration of malignant effusions, and drainage of abscesses. This review serves to provide insight into new categories of chemotherapy and their perioperative implications.

Keywords: keyword 1; keyword 2; keyword 3 (List three to ten pertinent keywords specific to the article yet reasonably common within the subject discipline.)

Cardiovascular disease (CVD) is the leading cause of death worldwide. Cardiac rehabilitation (CR) has proven to be effective in reducing the rate of recurrence and disease as secondary prevention (evidence-based intervention) in patients who have suffered from myocardial infarction (MI). CR is a multidisciplinary path in which the patient is followed pharmacologically, from a psychological, nutritional, nursing and physiotherapy point of view. Post-MI patients present a reduction in the performance of the diaphragm muscle, the main inspiratory muscle, and this condition can become a risk factor for further relapses or for the onset of heart failure. Despite the solidity of the international guidelines for CR, the latter are lacking in specifically indicating an evaluation and training path regarding the inspiratory muscles in post-MI patients who have not undergone cardiac surgery. The article reviews the information on the adaptation of the diaphragm post-MI and highlights the need for clearer indications for a rehabilitation process that gives importance to the diaphragm.

The recent outbreak of Coronavirus Disease 2019 (COVID-19) is a major threat to human health and the global economy. In addition to the development of vaccines there is an urgent need for preventive and therapeutic strategies towards severe COVID-19. Key to this would be a better understanding of the molecular mechanismsoiuuuu affected by SARS-COV-2. To address this, we performed a systems biology approach by integrating available RNA-seq datasets from post-mortem lung tissue of COVID-19 patients and cell culture models infected with SARS-COV-2, Respiratory Syncytial virus or influenza virus. We identified two gene-expression modules that are commonly regulated by the three viral diseases and one that is specific to COVID-19. All 3 gene-expression modules represent key inflammatory processes. We identified several proteins within these networks that can be targeted by FDA approved drugs. Key examples are TNF, NFkB, INTERLEUKIN-1 and ALOX5 signaling pathways. Our data also suggest that Vitamin D supplementation and a ketogenic diet should be further analyzed as preventive strategies. In conclusion, our data highlights the potential of transcriptomics to unravel the pathological processes related to COVID-19 and guide the initiation of clinical trials.

Objective: CAD/CAM generated ceramic implant abutments have recently attracted interest due to their superior customization possibilities and aesthetic advantages. Despite their widespread clinical use, little information is currently available on their surface topography, however. The transmucosal portion of the abutment shoulder is of particular interest, as it ideally supports soft tissue but minimizes mechanical plaque retention. The aim of this in vitro study was to topographically characterize the trans- and subgingival roughness of CAD/CAM zirconia abutments from different manufacturers and compare them with zirconia stock abutments. Material and Method: The surface topography of eight CAD/CAM zirconia implant abutments (tests) and two prefabricated zirconia stock abutments (controls) was determined using focus variation microscopy. Two points on the abutment shoulder were subjected to profilometric examination. 2D and 3D parameters of roughness were obtained and compared. Results: The surface roughness of all the test abutments exceeded the recommended threshold of Ra = 0.2 µm and therefore exhibited an increased risk of mechanical plaque retention. Obvious differences in surface structure were apparent, allowing conclusions to be drawn about the manufacturing method and subsequent reworking processes. Conclusion: Manually reworking the trans- and submucosal area of the investigated CAD/CAM zirconia abutments appears necessary to fulfil the conditions for optimal surface topography. The Sa value as arithmetic mean, taking the maximum height (Sz value) and surface excess (Sdr) into account, is an essential parameter for assessing the surface topography of implant abutments.

This paper compares the finite sample performance of three non-parametric threshold estimators via Monte Carlo method. Our results show that the finite sample performance of the three estimators is not robust to the relative position of the threshold level along the distribution of threshold variable, especially when a structural change occurs at the tail part of the distribution.

Globally, increasing rates of obesity are one of the most important health issues. The association between breakfast skipping and body weight is contradictory between cross-sectional and interventional studies. The systematic review and meta-analyses aim to summarize this association based on observational longitudinal studies. We included prospective studies on breakfast skipping and overweight/obesity or weight change in adults. Literature was searched until September 2020 in PubMed and Web of Science. Summary RRs with a 95% CI were estimated in pairwise meta-analyses by applying a random-effects model. In total, 9 studies were included in the systematic review and 6 of them were included in the meta-analyses. The meta-analysis indicated an 13% increased RR for overweight/obesity when breakfast was skipped on ≥ 3 days per week compared to ≤ 2 days per week (95% CI: 1.06, 1.21, n=3 studies). The meta-analysis on weight change displays a 21% increased RR for weight gain for breakfast skippers compared to breakfast eaters (95% CI: 1.05, 1.40, n=2 studies). The meta-analysis on BMI change displayed no difference between breakfast skipping and eating (RR=1.02, 95% CI: 0.99, 1.05, n=2 studies). This study provides low meta-evidence for an increased risk for overweight/obesity and weight gain for breakfast skipping.

Acetylcholine (ACh) is the best one characterized neurotransmitter. Its central roles in the cholinergic areas and central nervous system (CNS) and peripheral (PNS) synapses are well known. It was the first molecule identified as a neurotransmitter and appears to be phylogenetically the oldest one signaling molecules. ACh was detected in bacteria, protozoa, fungi, algae and primitive plants, indicating that the cholinergic system was widely distributed in living organisms before its appearance in the nervous system. The autonomous nervous system (ANS) is an integral part animal kingdom history. It determines fight-escape reactions as well as outlining the vital and cognitive functions bio-organization rhythms. The virus (Covid-19) extraneous effects acting on it could help to better understand its functions. The Blast results show some factors like protein that can be implicated such as bungaro-toxins, phospholipase A2 and the similar prothrombin activator protein. A positive correlation with different toxins is obtained and the Covid-19 double pathogenic mechanism theory is proposed. The process allows us to outline the possibility about toxic-like factors presence.

Objective: The COVID-19 pandemic inferred on neuro-oncological patients (PTS) and the caregivers regarding tumor care and emotional functioning. This study aimed to understand how COVID-19 affects their psychological state and relations between PTS and health personnel in neuro-oncology. Methods: A cross-sectional study on neuro-oncological PTS and their caregivers. Results: A total of 162 PTS and 66 caregivers completed the questionnaire. The 37.5% of PTS perceived greater risk of contracting the COVID-19 compared to the general population. On the 0-10 scale, PTS tumor-related anxiety score was 5.8 and COVID-related 4.6. The caregivers reported 7.7 and 5.5 respectively. The QoL was described at least as good in 75% of both PTS and caregivers; the caregivers’ care burden increased in 22.7% during the pandemic, with no correlation with QoL. Future perception often changed both in PTS and in the caregivers. Cancer treatment schedule was changed in 18.5%, including for PTS decision. However, the 93.5% of PTS was satisfied with the overall care. Conclusion: A considerable proportion of PTS and caregivers still perceived the tumor disease as more burdensome than the pandemic, and perceived their future as more uncertain. Such data rinforce the need to build a proficient alliance between PTS and health personnel.

The analysis and measurement of poverty is a crucial issue in the field of social science. Poverty is a multidimensional notion that can be measured using composite indicators relevant to synthesizing statistical indicators. Subjective choices could, however, affect these indicators. We propose interval-based composite indicators to avoid the problem, enabling us in this context to obtain robust and reliable measures. Based on a relevant conceptual model of poverty we have identified, we will consider all the various factors identified. Then, considering a different random configuration of the various factors, we will compute a different composite indicator. We can obtain a different interval for each region based on the distinct factor choices on the different assumptions for constructing the composite indicator. So we will create an interval-based composite indicator based on the results obtained by the Monte-Carlo simulation of all the different assumptions. The different intervals can be compared, and various rankings for poverty can be obtained. For their parameters, such as center, minimum, maximum, and range, the poverty interval composite indicator can be considered and compared. The results demonstrate a relevant and consistent measurement of the indicator and the shadow sector's relevant impact on the final measures.

The work proposes a backtesting analysis in comparison between the Lee-Carter and the Cairns-Blake-Dowd mortality models, employing Italian data. The mortality data come from the Italian National Statistics Institute (ISTAT) database and span the period 1975-2014, over which we computed back-projections evaluating the performances of the models in comparisons with real data. We propose three different backtest approaches, evaluating the goodness of short-run forecast versus medium-length ones. We find that both models were not able to capture the improving shock on the mortality observed for the male population on the analyzed period. Moreover, the results suggest that CBD forecast are reliable prevalently for ages above 75, and that LC forecast are basically more accurate for this data.

Objective: Our goal is to develop an online questionnaire to survey the prevalence of suicidal behavior. Methods: We developed a questionnaire with 51 variables and proceeded with validations. Validations were performed using face validity, content validity, and construct validity. Reliability was performed by test-rest. Results: The face validity was 1.0 and the content validity was 0.91. The exploratory factor analysis got KMO = 0.86 and extracted one principal factor. The confirmatory factor analysis demonstrates RMSEA= 0.000 and CFI=1.000. The test-retest had an intraclass correlated coefficient of 0.98. Conclusion: The adequate development questionnaire was validated, and we have an instrument to survey suicide behaviors in the pandemic time.

COVID-19 severity is heterogeneously distributed over age strata, but current mitigation strategies are homogeneously applied to all population. Social-distancing and stay-home are effective conservative approaches but lack economic sustainability on long term. Conversely, herd-immunity is a nonrestrictive strategy which can cost remarkable number of human lives and can melt the healthcare system down. Here I propose an Age Adaptive Social Distancing (AASD) engineering strategy to mitigate COVID-19 outbreak. AASD is based on the scientific evidence that the fatality rate grows nonlinearly with age, hence also the containing strategy should adapt nonlinearly. Essentially, AASD suggests that ‘silent spreaders’ (age 0-39) should avoid/minimize direct and indirect contacts with individuals in ‘dangerous zone’ (age 40+). The rationale is: 0-19 should follow parents strategy, healthy 20-39 (low fatality rate) might conduct screened life under active surveillance, to sustain economy and acquire rational immunity; 40-59 should respect social distancing (waiting a therapy); 60+ should stay at home (waiting a vaccine). This might save human lives, reduce healthcare demand and improve economic sustainability. The final take-home message is that future studies should design precision and personalized strategies for specific contagious diseases that integrate different social constrains, active surveillance and contact tracing.

Every firm is devoted to polishing and fine-tuning its maintenance strategy. More exactly, when we develop robust and efficient preventive and conditional maintenance approaches, our objective is to combine performance and robustness to increase maintenance decision-making. This, in turn, leads to a reduction in system failures and a subsequent drop in related expenses. This impulse drives the origin of this essay: to provide fresh criteria that allow us to improve and optimize maintenance techniques. Furthermore, our study has been realistically utilized via the deployment of condition-based maintenance (CBM) techniques, which are commonly regarded as a critical lever that allows firms to gain a competitive advantage in the context of the fourth industrial revolution. Combining both perfect and imperfect maintenance actions into CBM strategies appears to be an effective technique to obtain high economic performance and robustness in the maintenance strategies of the companies. Following this idea, we propose and optimize in this paper a set of criteria enabling the combined assessment of the mean economic performance and the resilience of various kinds of maintenance techniques. The advantage of the proposed criterion is that it adapts to different types of maintenance strategies and provides access to a simple and relevant evaluation model. Thanks to this new criterion, we will be able to choose the better maintenance strategies that have more performance and robustness between these strategies for a system with more or less stable behavior. The Monte Carlo Method is incorporated into the comparative assessment of maintenance methods, adding a layer to the evaluation of the performance and robustness of each adaptation in decision-making.

In Brazil, the production of corn and soybeans has been growing significantly in recent years. Considering that the strategies for investing in the production of these crops are conditioned by production costs and risk, the objective of this article is to propose a simulation model that indicates the trend of production costs for these commodities, considering the dispersion and correlation of selected key variable prices and corn and soybean production costs practiced between the years of 2018 and 2022. Fifty specialized companies in the state of Sao Paulo, Brazil, provided data for this study, and Monte Carlo simulations showed that the total cost of corn production/ha is between USD 600.00 and USD 1150.00, with a level of certainty of 84.7%, and soybeans are in the range of USD 260.00 to USD 420.00, with a level of certainty of 86.4%. The model evidenced a trend of decreasing production costs for the crops for the 2023/24 and 2024/25 harvests, as the input with the greatest impact (fertilizer) is showing a downward trend. On the other hand, costs related to labor, soybean seed, and fungicides are showing an upward trend, while dolomitic limestone corrective remains stable.

The retrieval of sun-induced chlorophyll fluorescence is greatly beneficial to studies of marine phytoplankton biomass, physiology, and composition and is required for user applications and services. Customarily phytoplankton chlorophyll fluorescence is determined from satellite measurements through a fluorescence line-height algorithm using three bands around 680 nm. We propose here a modified retrieval, making use of all available bands in the relevant wavelength range with the goal to improve the effectiveness of the algorithm in optically complex waters. For the Ocean and Land Colour Instrument (OLCI) we quantify a Fluorescence Peak Height from fitting a Gaussian function and related terms into the top-of-atmosphere reflectance bands between 650 and 750 nm. This algorithm retrieves, what we call Fluorescence Peak Height from fitting a Gaussian function upon other terms to top-of-atmosphere reflectance bands between 650 and 750 nm. This approach is applicable to Level-1 and Level-2 data. We find a good correlation of the retrieved fluorescence product to global in-situ chlorophyll measurements, as well as a consistent relation between chlorophyll concentration and fluorescence from radiative transfer modelling and OLCI/in-situ comparison. The algorithm is applicable to complex waters without needing an atmospheric correction and vicarious calibration and features an inherent correction of small spectral shifts, as required for OLCI measurements.

To sample from complex, high-dimensional distributions, one may choose algorithms based on the Hybrid Monte Carlo (HMC) method. HMC-based algorithms generate nonlocal moves alleviating diffusive behavior. Here, I build on an already defined HMC framework, Hybrid Monte Carlo on Hilbert spaces [A. Beskos, F.J. Pinski, J.-M. Sanz-Serna and A.M. Stuart, Stoch. Proc. Applic. 121, 2201 - 2230 (2011); doi:10.1016/j.spa.2011.06.003] that provides finite-dimensional approximations of measures π which have density with respect to a Gaussian measure on an infinite-dimensional Hilbert (path) space. In all HMC algorithms, one has some freedom to choose the mass operator. The novel feature of the algorithm described in this article lies in the choice of this operator. This new choice defines a Markov Chain Monte Carlo (MCMC) method which is well defined on the Hilbert space itself. As before, the algorithm described herein uses an enlarged phase space Π having the target π as a marginal, together with a Hamiltonian flow that preserves Π. In the previous method, the phase space π was augmented with Brownian bridges. With the new choice for the mass operator, π is augmented with Ornstein-Uhlenbeck (OU) bridges. The covariance of Brownian bridges grows with its length, which has negative effects on the Metropolis-Hasting acceptance rate. This contrasts with the covariance of OU bridges which is independent of the path length. The ingredients of the new algorithm include the definition of the mass operator, the equations for the Hamiltonian flow, the (approximate) numerical integration of the evolution equations, and finally the Metropolis-Hastings acceptance rule. Taken together, these constitute a robust method for sampling the target distribution in an almost dimension-free manner. The behavior of this novel algorithm is demonstrated by computer experiments for a particle moving in two dimensions, between two free-energy basins separated by an entropic barrier.

An iterative outlier elimination procedure based on hypothesis testing, commonly known as Iterative Data Snooping (IDS) among geodesists, is often used for the quality control of the modern measurement systems in geodesy and surveying. The test statistic associated with IDS is the extreme normalised least-squares residual. It is well-known in the literature that critical values (quantile values) of such a test statistic cannot be derived from well-known test distributions, but must be computed numerically by means of Monte Carlo. This paper provides the first results about Monte Carlo-based critical value inserted to different scenarios of correlation between the outlier statistics. From the Monte Carlo evaluation, we compute the probabilities of correct identification, missed detection, wrong exclusion, overidentifications and statistical overlap associated with IDS in the presence of a single outlier. Based on such probability levels we obtain the Minimal Detectable Bias (MDB) and Minimal Identifiable Bias (MIB) for the case where IDS is in play. MDB and MIB are sensitivity indicators for outlier detection and identification, respectively. The results show that there are circumstances that the larger the Type I decision error (smaller critical value), the higher the rates of outlier detection, but the lower the rates of outlier identification. For that case, the larger the Type I Error, the larger the ratio between MIB and MDB. We also highlight that an outlier becomes identifiable when the contribution of the measures to the wrong exclusion rate decline simultaneously. In that case, we verify that the effect of the correlation between the outlier statistics on the wrong exclusion rates becomes insignificant from a certain outlier magnitude, which increases the probability of identification.

Dietary supplements are more and more often used to increase daily intake of essential vitamins and minerals. These preparations are classified as special category of foods and are subject to food law, not pharmaceutical regulations. As a result the requirements to dietary supplements are much less restrictive than to medications. Also simple and inexpensive procedure of registration causes that the number of dietary supplements is widely spread every year. On every manufacturing phases of dietary supplements, there is a risk of contamination. One of the pollutions might be mercury which is classified as heavy metal. Its inorganic compounds damage kidneys and liver and methylmercury is easily absorbed from gastrointestinal system. Methylmercury is distributed in all tissues, also in nervous system. The aim of study was to determine the level of mercury in multivitamins and multiminerals preparations and to analyze the results. The study included 22 dietary supplements containing vitamins and minerals available on Polish market. Mercury was analyzed with atomic absorption spectrometry using AMA 254. The concentrations of Hg was 0.22–5.85 µg/kg (the average content was 2.40 µg/kg). The highest average mercury content was 4.51 µg/kg, whereas the lowest one was 0.31 µg/kg. The results was also analyzed in individual groups depending on main component and indication for use as well as pharmaceutical formulation. Also according to manufacturer’s recommendation, the dose of mercury taken with a single medicine was estimated for time of a day, a week, a month, 3 months and also a year. The findings were compared to limits defined in regulations of European Union and PTWI set by JECFA to assess the health risk. The results presented in this study proved that the amount of mercury in tested dietary supplements is much lower than the value of valid regulations. Analyzed supplements as long as they are used with the recommendation of manufacturer, do not pose a threat to human health.

In the concept of the process signature, the relationship between a material load and the modification remaining in the workpiece is used to better understand and optimize manufacturing processes. The basic prerequisite for this is to be able to measure the loads occurring during the machining process in the form of mechanical deformations. Speckle photography is suitable for this in-process measurement task and is already used in a variety of ways for in-plane deformation measurements. The shortcoming of this fast and robust measurement technique based on image correlation techniques is that out-of-plane deformations in the direction of the measurement system cannot be detected and increases the measurement error of in-plane deformations. In this paper, we investigate a method that infers local out-of-plane motions of the workpiece surface from the decorrelation of speckle patterns and is thus able to reconstruct three-dimensional deformation fields. The implementation of the evaluation method enables a fast reconstruction of 3D deformation fields, so that the in-process capability remains given. First measurements in a deep rolling process show that dynamic deformations underneath the die can be captured and demonstrate the suitability of the speckle method for manufacturing process analysis.

Advanced ceramics are recognized as key enabling materials possessing combinations of properties not achievable in other material classes. They are characterized by very high thermal, chemical and mechanical resistance and also usually have a lower density than metals. These properties predestine ceramics for many different applications, especially space applications.In the aerospace sector aerospike nozzles promise performance and application advantages compared to classic bell nozzles but are also inherently more complex to manufacture due to their shape. AM methods drastically simplify or even enable the fabrication of those complex structures while minimising the number of individual parts. The applicability of ceramic AM (“CerAMfacturing”) on rocket engines and especially nozzles is consequently investigated in the frame of the “MACARONIS” project, a cooperation of the Institute of Aerospace Engineering at Technische Universität Dresden and the Fraunhofer Institute for Ceramic Technologies and Systems (IKTS) in Dresden. The goal is to develop novel large size aerospike thrust nozzles including areas of highest resolution and fineness. Finding a suitable AM process that enables the realisation of both aspects is extremely challenging. One possibility could be the hybridization of shaping methods, in that case CerAM VPP (ceramic additive manufacturing via vat photopolymerization) and CerAM FFF (ceramic additive manufacturing via fused filament fabrication) in combination with sinter joining. This contribution focuses on the high resolution CerAM VPP process, in particular the development, characterization and testing of a new photoreactive Al₂O₃ suspension validated by AM of novel aerospike nozzles.

Although previous studies have focused on the adverse effects of the COVID-19 pandemic on various professional groups (particularly in the health and nursing care sector), this study aims to close a research gap by assessing perspectives of students and young professionals in epidemiology and public health in Germany in terms of shifts in workload, work content, and related challenges caused by the pandemic. We conducted a cross-sectional survey between mid-February and mid-March 2022. Quantitative data were analyzed via standardized mean differences. Qualitative data based on answers to open-ended questions were analyzed via a qualitative content analysis. Overall, 172 individuals participated in this survey. Results indicate that students felt burdened the most by lack of exchange with other students and lecturers. Study participants employed in public health experienced changes in their employment, because they had changes in their work content- and administration-wise, which was accompanied with a high burden due to the workload. Multiple demands that can have an impact on both acquired skills and mental health during the professional qualification phase were mentioned by the participants. Therefore, more in-depth analyses are needed for investigating the impact the pandemic will have on the (future) public health workforce in the long run.

Despite the growing capabilities of large language models, concerns exist about the biases they develop. In this paper, we propose a novel, automated mechanism for debiasing through specified dataset augmentation in the lens of bias producers that can be useful in a variety of industries, especially ones that are “restricted” and have limited data. We consider that bias can occur due to intrinsic model architecture and dataset quality. The two aspects are evaluated using two different metrics we created. We show that our dataset augmentation algorithm reduces bias as measured by our metrics.

A large body of evidence reports about the positive effects of physical activity in pathophysiological conditions associated with aging. Physical exercise, alone or in combination with other medical therapies, unquestionably causes reduction of symptoms in chronic non-transmissible diseases often leading to significant amelioration or complete healing. The molecular basis of this exciting outcome, however, remain largely obscure. Epigenetics, exploring at the interface between environmental signals and the remodelling of chromatin structure, promises to shed light on this intriguing matter possibly contributing to the identification of novel therapeutic targets. In this review, we shall focalize on the role of sirtuins (Sirts) a class III histone deacetylases (HDACs) which function has been frequently associated, often with a controversial role, to the pathogenesis of aging-associated pathophysiological conditions including cancer, cardiovascular, muscular, neurodegenerative, bones and respiratory diseases. Numerous studies, in fact, demonstrate that Sirt-dependent pathways are activated upon physical and cognitive exercises linking mitochondrial function, DNA structure remodelling and gene expression regulation to designed medical therapies leading to tangible beneficial outcomes. However, in similar conditions, other studies assign to sirtuins a negative pathophysiological role. In spite of this controversial effect, it is doubtless that studying sirtuins in chronic diseases might lead to an unprecedented improvement of life quality in the elderly.

Amid to the COVID-19 pandemic, digital health literacy (DHL) has become a significant public health concern. This research aims to assess information seeking behavior, as well as the ability to find relevant information and deal with DHL among university students in Pakistan. An online-based cross-sectional survey, using a web-based interviewing technique, was conducted to collect data on DHL. Simple bivariate and multivariate linear regression was performed to assess the association of key characteristics with DHL. The results show a high DHL related to COVID-19 in 54.3% of students. Most of the Pakistani students demonstrated ~50% DHL in all dimensions, except of reliability. Multivariate findings showed that gender, sense of coherence and importance of information were found to be significantly associated with DHL. However, a negative association was observed with students’ satisfaction with information. This led to the conclusion that critical operational and navigations skills are essential to achieve COVID-19 DHL and cope with stress, particularly to promote both personal and community health. Focused interventions and strategies should be designed to enhance DHL amongst university students to combat the pandemic.

As air traffic demand grows, robust, data-driven anomaly detection methods are required to ensure that aviation systems become safer and more efficient. The terminal airspace is identified as the most critical airspace for both individual flight-level and system-level safety and efficiency. As such, developing data-driven anomaly detection methods to analyze terminal airspace operations is paramount. With the expansion of ADS-B technology, open-source flight tracking data has become more readily available to enable larger-scale analyses of aircraft operations. This paper makes a distinction between spatial metrics in ADS-B trajectory data and energy metrics derived from ADS-B trajectory data. Motivated by the limited number of approaches that simultaneously consider both spatial and energy metrics, this paper introduces the concepts of spatial anomalies and energy anomalies. In particular, it proposes a novel, unified framework for detection of spatial and energy anomalies in ADS-B trajectory data (and associated derived metrics). The framework consists of three main parts - a data processing procedure, a spatial anomaly detection method, and an energy anomaly detection method. The framework is demonstrated utilizing four months of ADS-B trajectory data associated with arrivals at San Francisco International Airport, and the relationship between the spatial and energy anomalies in this terminal airspace is explored. The results that stem from the implementation of this framework indicate that if an aircraft is spatially not conforming to an identified set of air traffic flows representing standard spatial operations, then this aircraft is more likely to experience non-conformance to standard operations in its energy metrics. Aviation operators, such as air traffic controllers, may benefit from this observation, as it may factor into decision-making in instances where there is the potential to instruct an aircraft to spatially deviate from standard operations. Additionally, this research revealed underlying differences between trajectories that are spatially nominal yet energy-anomalous and those trajectories that are spatially anomalous and energy-anomalous. Focusing solely on energy anomaly detection does not provide insight into potential spatial-related decisions that may have been made to result in off-nominal energy behavior.

Flexible implementations of Monte Carlo Tree Search (MCTS), combined with domain specific knowledge and hybridization with other search algorithms, can be a very powerful for the solution of problems in complex planning. We introduce mctreesearch4j, a standard MCTS implementation written as a standard JVM library following key design principles of object oriented programming. We define key class abstractions allowing the MCTS library to flexibly adapt to any well defined Markov Decision Process or turn-based adversarial game. Furthermore, our library is designed to be modular and extensible, utilizing class inheritance and generic typing to standardize custom algorithm definitions. We demon- strate that the design of the MCTS implementation provides ease of adaptation for unique heuristics and customization across varying Markov Decision Process (MDP) domains. In addition, the implementation is reasonably performant and accurate for standard MDP’s. In addition, via the implementation of mctreesearch4j, the nuances of different types of MCTS algorithms are discussed.

We discuss two methods to detect the presence and location of a person in a small-scale room and compare the performances. The first method is Direct Intersection, which determines a coordinate point based on the intersection of spheroids defined by observed distances of high-intensity reverberations. The second method, Sonogram analysis, overlays all channel’s room impulse responses to generate an intensity map for the observed environment. We demonstrate that the former method has lower computation complexity and higher accuracy for small numbers of channels, while the latter performs more robustly.

Handedness reflects functional body and hemispheric lateralization, proving relevant to contextualize cognitive and behavioral profiles. This study aimed to determine the lateralization of the hands, feet and eyes in patients with various neurological disorders and to test the Edinburgh Handedness Inventory (EHI), a widely used handedness measure. The study design included a literature overview and a clinical study. The overview spanned the literature of the past 50 years since the EHI was developed. Three hundred seventy-four patients with immune-mediated (IM) or noIM neurological diseases and healthy subjects underwent personal and family history of handedness, stressful events and IM diseases, and EHI. The literature overview showed that handedness, which develops under the influence of genetic and acquired factors, is an indirect indicator of hemispheric lateralization; hemispheric lateralization is bidirectionally related to the immune system. In the clinical study, the EHI showed appropriate reliability and structural validity; its scores related to chronological age, onset age, and disease duration and helped distinguish patients with IM disease from other patients and healthy subjects. Therefore, handedness may change over the course of life under the influence of pathology and could predict IM neurological diseases. The EHI is an appropriate measure of handedness.

Dynamic hedging has been adopted by many insurance companies to mitigate the financial risks associated with variable annuity guarantees. In order to simulate the performance of dynamic hedging for variable annuity products, insurance companies rely on nested stochastic projections, which is highly computationally intensive and often prohibitive for large variable annuity portfolios. Metamodeling techniques have recently been proposed to address the computational issues. However, it is difficult for researchers to obtain real datasets from insurance companies to test metamodeling techniques and publish the results in academic journals. In this paper, we create synthetic datasets that can be used for the purpose of addressing the computational issues associated with the nested stochastic valuation of large variable annuity portfolios. The runtime used to create these synthetic datasets would be about 3 years if a single CPU were used. These datasets are readily available to researchers and practitioners so that they can focus on testing metamodeling techniques.

The total enthalpies of the 16 different spin configurations that can be realized in the unit cell of the archetype spin crossover complex [Fe(phen)₂(NCS)₂] (phen=1,2-phenanthroline) were calculated applying periodic density functional theory combined with the Hubbard model and the Grimme-D2 dispersion correction (DFT+U/D2). The obtained enthalpy differences between the individual spin configurations were used to determine spin couplings of an Ising-like model and subsequent Monte Carlo simulations for this model allowed to estimate the phenomenological interaction parameter Г of the Slichter-Drickamer model, which is commonly used to describe the cooperativity of the spin transition. The calculational procedure described here, which led to an estimate of about 3 kJ/mol⁻¹ for Г, in good agreement with experiment, may be used to predict from first principles how modifications of spin crossover complexes can change the character of the spin transition from gradual to abrupt and vice versa.

Long-range interactions are relevant for a large variety of quantum systems in quantum optics and condensed matter physics. In particular, the control of quantum-optical platforms promises to gain deep insights in quantum-critical properties induced by the long-range nature of interactions. From a theoretical perspective, long-range interactions are notoriously complicated to treat. Here, we give an overview of recent advancements to investigate quantum magnets with long-range interactions focusing on two techniques based on Monte Carlo integration. First, the method of perturbative continuous unitary transformations where classical Monte Carlo integration is applied within the embedding scheme of white graphs. This linked-cluster expansion allows to extract high-order series expansions of energies and observables in the thermodynamic limit. Second, stochastic series expansion quantum Monte Carlo which enables calculations on large finite systems. Finite-size scaling can then be used to determine physical properties of the infinite system. In recent years, both techniques have been applied successfully to one- and two-dimensional quantum magnets involving long-range Ising, XY, and Heisenberg interactions on various bipartite and non-bipartite lattices. Here, we summarise the obtained quantum-critical properties including critical exponents for all these systems in a coherent way. Further, we review how long-range interactions are used to study quantum phase transitions above the upper critical dimension and the scaling techniques to extract these quantum critical properties from the numerical calculations.

We consider a class of density-driven flow problems. We are particularly interested in the problem of the salinization of coastal aquifers. We consider the Henry saltwater intrusion problem with uncertain porosity, permeability, and recharge parameters as a test case. The reason for the presence of uncertainties is the lack of knowledge, inaccurate measurements, and inability to measure parameters at each spatial or time location. This problem is nonlinear and time-dependent. The solution is the salt mass fraction, which is uncertain and changes in time. Uncertainties in porosity, permeability, recharge, and mass fraction are modeled using random fields. This work investigates the applicability of the well-known multilevel Monte Carlo (MLMC) method for such problems. The MLMC method can reduce the total computational and storage costs. Moreover, the MLMC method runs multiple scenarios on different spatial and time meshes and then estimates the mean value of the mass fraction. The parallelization is performed in both the physical space and stochastic space. To solve every deterministic scenario, we run the parallel multigrid solver ug4 in a black-box fashion. We use the solution obtained from the quasi-Monte Carlo method as a reference solution.

Link prediction is an unbalanced early retrieval problem, whose goal is to prioritize a small cohort of positive links on top of a list largely populated by unlabelled links. Differently from binary classification, here the evaluation focuses on how the predictor prioritizes the positive class because, in practice, a negative class does not exist. Previous studies explained that AUC-ROC is not apt for unbalanced class problems and is misleading for early retrieval problems, therefore standard AUC-ROC is not appropriate for evaluation of link prediction. However, some scholars argue that an AUC-ROC like evaluation accounting for the relative positioning of the few positive links among the vastness of unlabelled links remains a valid concept to pursue. Here we propose the area under the magnified ROC (AUC-mROC), a new measure that adjusts the standard AUC-ROC to work also for unbalanced early retrieval problems such as link prediction.

The influence of distant London dispersion forces on the docking preference of alcohols of different size between the two lone electron pairs of the carbonyl group in pinacolone is explored by infrared spectroscopy of the OH stretching fundamental in supersonic jet expansions of 1:1 solvate complexes. Experimentally, no pronounced tendency of the alcohol to switch from the methyl to the bulkier tert-butyl side with increasing size is found. In all cases, methyl docking dominates by at least a factor of two, whereas DFT-optimized structures suggest a very close balance for the larger alcohols, once corrected by CCSD(T) relative electronic energies. Together with inconsistencies when switching from a C4 to a C5 alcohol, this points at deficiencies of the investigated B3LYP and in particular TPSS functionals even after dispersion correction, which cannot be blamed on zero point energy effects. The search for density functionals which describe the harmonic frequency shift, the structural change and the energy difference between the docking isomers of larger alcohols to unsymmetric ketones in a satisfactory way is open.

Since the early 1990s, the European (ESA) and Italian (ASI) space agencies have managed and distributed a huge amount of satellite-recorded SAR data to the research community and private industries. Moreover, the availability of advanced cloud computing services implementing different multi-temporal SAR interferometry techniques allows the generation of deformation time series from massive SAR images. We exploit the information provided by a large PS dataset to determine the temporal trend of ground deformation and the relative deformation rate with millimetric accuracy to analyse the spatial and temporal distribution of land subsidence induced by water pumping from a deep confined aquifer in the Northern Valle Umbra Basin (Central Italy), exploiting 24 years of Permanent Scatterers – Interferometric SAR data archives. The SAR images were acquired between 1992 and 2016 by satellite ERS1/2, ENVISAT and Sentinel 1 ESA missions, and the COSMO-SkyMed ASI mission). We observe ground velocities and deformation geometries between 1992 and 2016, with displacements of more than 70 cm and velocities of up to 55 mm/yr and the results suggest that the shape and position of the surface ground displacement are controlled by the fault activity hidden under the valley deposits.

Osteosarcoma (OS) are the most prevalent malignant bone tumors in adolescents and young adults.. OS cells grow in a permissive local microenvironment which modulates their behavior and facilitates all steps in tumor development (e.g., proliferation/quiescence, invasion/migration, drug resistance) and contributes to their intrinsic heterogeneity. The lung parenchyma is the most common metastatic site in OS, and metastatic foci are frequently associated with a poor clinical outcome. Although multiple factors may be responsible for the disease, including genetic mutations (e.g., Rb, p53), the molecular mechanism of development of OS remains unclear and the conventional treatment for OS is still based on a sequential approach that combines chemotherapy and surgery. Also, despite the increase in clinical trials, the survival rates for OS have not improved. Non-specific targeting therapies thus show poor therapeutic effects with side effects at high doses. For these reasons, many efforts have been done to characterize the complex genome of osteosarcoma thanks to the whole exome analysis with the aim to identify predictive biomarkers to give to these patients a better therapeutic option. This review aims to summarize and discuss the main recent advances in OS molecular research for precision medicine.

An informative probe of myosin crossbridge behaviour in active muscle is a mechanical transient experiment where, for example, a fully active muscle initially held at constant length is suddenly shortened to a new fixed length giving a force transient, or has its load suddenly reduced giving a length transient. We describe the simplest crossbridge mechanical cycle we could find to model these transients. We show using the statistical mechanics of 50,000 crossbridges that a simple cycle with two actin-attached cross-bridge states, one producing no force and the other producing force, will explain much of what has been observed experimentally and we discuss the implications of this modelling for our understanding of how muscle works. We show that this same simple model will explain reasonably well the isotonic mechanical and X-ray transients under different loads observed by Reconditi et al (2004, Nature 428, 578) and that there is no need to invoke different crossbridge step sizes under these different conditions; a step size of 100 Å works well for all loads. We do not claim that this model provides a total mechanical explanation of how muscle works. But we do suggest that only if there are other observations that cannot be explained by this simple model should something more complicated be considered.

Many governments particularly in Europe are designing social interventions for the first post COVID-19 emergency phase. Definition of a ‘best practice’ for restriction release is urgent. Although data uncertainty generate difficulties, we believe near term analysis must shift from attempting to understand the numerous ‘unknowns’ to the clarification and interpretation of the few ‘knowns’, to create stepping stones towards rapid evidence-based decision making.Here, open access data on COVID-19 severity in three European countries were analyzed. Spain’s data were more comprehensive than those from Italy and Germany. Overall, COVID-19 severity shows a remarkable nonlinear growth with age that is significantly higher in adult males. Hence, age-adaptive and gender-balanced social interventions might represent efficient repopulation options for public health policymakers. Furthermore, we urge wider governmental effort for open access to relevant data. Their analysis will allow consolidation of existing trends, validation of key observations and thus facilitation of timely decisions.

The Total Algae Peak Integration Retrieval TAPIR relates the chlorophyll-a absorption coefficient at 440 nm (a440) to the reflectance peak near 683 nm induced by chlorophyll-a properties. The two-step retrieval provides both the hyperspectral quantification of the phytoplankton fluorescence and scattering and the estimation of a440 from reflectance signals. Integrating the peak, the Total Algae Peak (TAP) accounts for the variance in the peak's magnitude, shape, and central peak wavelength. TAPIR is a solely optical approach estimating a440 and supports the application of retrieval-independent individual regional bio-optical models afterwards to retrieve the chlorophyll-a concentration. Simulations reveal the major sensitivity on the considered model chlorophyll-a absorption spectrum and its single scattering albedo. Additional water and atmosphere constituents have a low impact. An uncertainty assessment reveals uncertainties of less than 30% for TAPIR a440 greater than 0.8 m-1 and less than 38% for lower a440. In optically complex waters, first validation efforts promise the applicability of TAPIR for high chlorophyll-a concentration estimations in the presence of additional water constituents. The technique is generic and considers external conditions (sun zenith angle, number of measurement bands, surface or satellite measurements, and radiometric quantity). TAPIR applies to all kind of waters including optically complex waters, arctic to tropical regions, and inland, coastal, and open ocean waters. Among other hyperspectral satellite sensors, the Environmental Mapping and Analysis Program (EnMAP) provides sufficient sampling bands for the application of TAPIR.

After 2010, the source model of the microSelectron HDR Afterloader System was slightly modified from the previous model. Granero et al. named the modified source model “mHDR-v2r (revised model mHDR-v2)” and the previous model “mHDR-v2”. They concluded that the dosimetric differences arising from the dimensional changes between the mHDR-v2 and mHDR-v2r designs were negligible at almost all locations (within 0.5 % for r ≥ 0.25 cm), the two-dimensional anisotropy function difference between the two sources is found 2.1 % at r = 1.0 cm when compared with the results of the other experimental group. To confirm this difference, we performed a full Monte Carlo simulation without the energy fluence approximation. This is useful near the radiation source where charged-particle equilibrium does not hold. The two-dimensional anisotropy function of the TG-43U1 dataset showed a few percent difference between the mHDR-v2r and mHDR-v2 sources. There was no agreement in the immediate vicinity from the source (0.10 cm and 0.25 cm), when compared to Granero et al. in mHDR-v2r sources. The differences in these two-dimensional anisotropy functions were identified.

Model selection and model averaging have been the popular approaches in handling modelling uncertainties. Fan and Li(2006) laid out a unified frame work for variable selection via penalized likelihood. The tuning parameter selection is vital in the optimization problem for the penalized estimators in achieving consistent selection and optimal estimation. Since the OLSpost-LASSO estimator by Belloni and Chernozhukov (2013), few studies have focused on the finite sample performances of the class of OLS post-penalty estimators with the tuning parameter choice determined by different tuning parameter selection approaches. We aim to supplement the existing model selection literature by studying such a class of OLS post-selection estimators. Inspired by the Shrinkage Averaging Estimator (SAE) by Schomaker(2012) and the Mallows Model Averaging (MMA) criterion by Hansen (2007), we further propose a Shrinkage Mallows Model Averaging (SMMA) estimator for averaging high dimensional sparse models. Based on the Monte Carlo design by Wang et al. (2009) which features an expanding sparse parameter space as the sample size increases, our Monte Carlo design further considers the effect of the effective sample size and the degree of model sparsity on the finite sample performances of model selection and model averaging estimators. From our data examples, we find that the OLS post-SCAD(BIC) estimator in finite sample outperforms most of the current penalized least squares estimators as long as the number of parameters does not exceed the sample size. In addition, the SMMA performs better given sparser models. This supports the use of the SMMA estimator when averaging high dimensional sparse models.

The description of protein disordered states is important for understanding protein folding mechanisms and their functions. In this short review, we briefly describe a simulation approach to modeling disordered protein interactions and unfolded states of globular proteins. It is based on the CABS coarse-grained protein model that uses a Monte Carlo (MC) sampling scheme and a knowledge-based statistical force field. We review several case studies showing that description of protein disordered states resulting from CABS simulations is consistent with experimental data. The case studies comprise investigations of protein-peptide binding and protein folding processes. The CABS model has been recently made available as the simulation engine of multiscale modeling tools enabling studies of protein-peptide docking and protein flexibility. Those tools offer customization of the modeling process, driving the conformational search using distance restraints, reconstruction of selected models to all-atom resolution and studies of large protein systems in a reasonable computational time. Therefore, CABS can be combined in integrative modeling pipelines incorporating experimental data and other modeling tools of various resolution.

Estimates of extreme water level return periods in river systems are crucial for hydraulic engineering design and planning. Recorded historical water level data of Taiwan’s rivers are not long enough for traditional frequency analyses when predicting extreme water levels for different return periods. In this study, the integration of a one-dimensional flash flood routing hydrodynamic model with the Monte Carlo simulation was developed to predict extreme water levels in the Danshuei River system of northern Taiwan. The numerical model was calibrated and verified with observed water levels using four typhoon events. The results indicated a reasonable agreement between the model simulation and observation data. Seven parameters, including the astronomical tide and surge height at the mouth of the Danshuei River and the river discharge at five gauge stations, were adopted to calculate the joint probability and generate stochastic scenarios via the Monte Carlo simulation. The validated hydrodynamic model driven by the stochastic scenarios was then used to simulate extreme water levels for further frequency analysis. The design water level was estimated using different probability distributions in the frequency analysis at five stations. The design high-water levels for a 200-year return period at Guandu Bridge, Taipei Bridge, Hsin-Hai Bridge, Da-Zhi Bridge, and Chung-Cheng Bridge were 2.90 m, 5.13 m, 6.38 m, 6.05 m, and 9.94 m, respectively. The estimated design water levels plus the freeboard are proposed and recommended for further engineering design and planning.

This paper concentrates on computing the efficiency of heliostat field systems. By conducting a comprehensive analysis of the mathematical model for optical efficiency, we have effectively simplified the complex three-dimensional illumination problem of heliostat fields into a two-dimensional issue. Our work primarily investigates the calculation methods for the average optical efficiency and output power of heliostat. Traditionally, calculating shadow and blocking efficiency, key factors affecting the optical performance of mirror fields, has posed a significant technical challenge. Through innovative improvements to the Monte Carlo simulation technique, this study has successfully reduced the spatial dimensionality of the problem. We employed a series of novel coordinate transformations to simulate light tracing on a two-dimensional plane, thereby efficiently calculating the efficiency of shadows and obstructions. Not only have we solved the computational challenges of shadow and obstruction efficiency, but our unique algorithm design also allows us to precisely obtain the overall average optical efficiency of the heliostat field while enhancing computational efficiency.

The entropy models have been recently adopted in many studies to evaluate the distribution of the shear stress in circular channels. However, the uncertainty in their predictions and their reliability remains an open question. We present a novel method to evaluate the uncertainty of four popular entropy models, including Shannon, Shannon-Power Low (PL), Tsallis, and Renyi, in shear stress estimation in circular channels. The Bayesian Monte-Carlo (BMC) uncertainty method is simplified considering a 95% Confidence Bound (CB). We developed a new statistic index called as FREE_opt-based OCB (FOCB) using the statistical indices Forecasting Range of Error Estimation (FREE) and the percentage of observed data in the CB (N_in), which integrates their combined effect. The Shannon and Shannon PL entropies had close values of the FOCB equal to 8.781 and 9.808, respectively, had the highest certainty in the calculation of shear stress values in circular channels followed by traditional uniform flow shear stress and Tsallis models with close values of 14.491 and 14.895, respectively. However, Renyi entropy with much higher values of FOCB equal to 57.726 has less certainty in the estimation of shear stress than other models. Using the presented results in this study, the amount of confidence in entropy methods in the calculation of shear stress to design and implement different types of open channels and their stability is determined.

This paper investigates the inverse option problems (IOP) in the extended Black--Scholes model arising in financial markets. We identify the volatility and the drift coefficient from the measured data in financial markets using a Bayesian inference approach, which is presented as an IOP solution. The posterior probability density function of the parameters is computed from the measured data. The statistics of the unknown parameters are estimated by a Markov Chain Monte Carlo (MCMC) algorithm, which exploits the posterior state space. The efficient sampling strategy of the MCMC algorithm enables us to solve inverse problems by the Bayesian inference technique. Our numerical results indicate that the Bayesian inference approach can simultaneously estimate the unknown trend and volatility coefficients from the measured data.

Background: Metastatic oral squamous cell carcinoma (OSCC) is associated with poor patient prognosis. Metastasis is a complex process involving various proteins, tumor cell alterations including changes caused by the epithelial-to-mesenchymal transition (EMT) process, and interactions with the tumor microenvironment (TME). In this study, we investigate a combined protein marker system consisting of connexin 43 (Cx43), EMMPRIN (CD147), E-cadherin and vimentin during the invasive metastatic process of OSCC and the possibility of using this system for prognosis prediction. Methods: The protein expression profiles of Cx43, EMMPRIN, E-cadherin and vimentin were investigated by immunohistochemistry in tissue samples from 24 OSCC patients. The metastatic process was mapped through different regions of interest (ROI) of adjacent healthy oral mucosa (OM), center of primary OSCC, invasive front (IF), and local cervical lymph node metastases (LNM). Disease-free survival (DFS) and overall survival (OS) were the primary clinical endpoints. Results: Significant changes in the expression profiles of the different marker proteins were detected between the different ROIs (all p values < 0.05). Multivariable Cox regression analysis revealed a significant effect of increased EMMPRIN expression towards IF on DFS (p = 0.019) and OS (p = 0.023). The combined predictive analysis showed a significant predictive value of the marker system for DFS (p = 0.0017) and OS (p = 0.00044). Conclusions: The combined marker system was able to significantly predict patient prognosis. An increase in EMMPRIN expression towards IF showed the strongest effect and could be an interesting new antimetastatic therapy approach.

: This study presents energy and exergy analyses conducted on a Gifford-McMahon cycle refriger-ator. Through detailed numerical simulations, the performance of the refrigerator is thoroughly assessed, with a particular focus on energy and exergy losses. The obtained results are compared with Sankey and Grassman diagrams, providing visual representations of energy and exergy flows within the system. The localization of exergy losses is carefully analysed to identify key areas for optimization aimed at enhancing efficiency and power output. By pinpointing sources of ex-ergy destruction, targeted improvements can be implemented to maximize the overall perfor-mance of the refrigerator. Overall, this research contributes to a deeper understanding of the thermodynamic behaviour of Gifford-McMahon cycle refrigerators and provides valuable insights for optimizing their performance in practical applications.

In this paper we will find that, according to holographic principle {\cite{Holografico}} and thus considering Universe as the ensemble of $\aleph$ information bits or minimum particles of mass $m_{g}$, the contribution to galactic rotation curves can be due the rest of the visible Universe through a non-local collective gravitational interaction of all particles within the Universe's horizon, as a consequence of which all particles are gravitationally entangled and form a unified statistical ensemble. Therefore, we can to describe this global effect in terms of standard local Newtonian gravity within galaxies for the explanation of flatness galactic rotation curves as a possible alternative to the dark matter or MOND hypothesis. We will find a solution for the baryonic Tully-Fischer relation: $M_{b} = A v_{f}^4 \iff A = \left[a_{0}G \right]^{-1}$ with $a_{0} = \frac{cH_{0}}{2\pi}$, where $H_{0}$ is the Hubble constant at present Time $t_{0}$ and $M_{b}$, $G$ and $c$ are the galaxy baryonic mass, gravitational constant and constant speed of light in vacuum respectively. Also we will find the mass discrepancy-acceleration relation, thus obtaining a possible solution for each of the three laws of rotationally supported galaxies proposed in ({\cite{McGaugh}},{\cite{McGaugh1}}).

The fatigue life of welded joints under cyclic loading is a complex process that can be roughly divided into fatigue crack initiation, crack propagation and final fracture. Usually, these phases are evaluated separately. Several methods are available to estimate the extent of the different phases in welded components, such as stress-based fatigue concepts for crack initiation or linear elastic fracture mechanics for crack propagation; however, distinguishing these phases in welded components is a complex procedure and often relies on assumptions such as transition crack sizes. The objective of this study is to investigate the relationship between fatigue crack initiation and propagation in welded joints using artificially notched specimens with welded joints characteristics of different notch acuity (different radii and opening angle). The experiments show that the investigated relationship basically depends on the notch acuity, the load level and the stress ratio.

Telecommuting is a flexible form of work that has progressively spread over the last 40 years and which has been strongly encouraged by the measures to limit the Covid19 pandemic. There is still limited evi-dence on the effects it has on workers' health. In this survey we invited 905 workers of companies that made a limited use of telework to fill out a questionnaire to evaluate: Intrusive leadership of managers (IL), the request for work outside traditional hours (OFF-TAJD), workaholism (BWAS), effort / reward imbalance (ERI), happiness and common mental issues (CMIs), anxiety and depression, assessed by the Goldberg scale (GADS). The interaction between these variables has been studied by structural equation modeling (SEM). Intrusive leadership and working after hours were significantly associated with occu-pational stress. Workaholism is a relevant moderator of this interaction: intrusive leadership significantly increased the stress of workaholic workers. Intrusive leadership and overtime work were associated with reduced happiness, anxiety and depression. These results indicate the need to guarantee the right to disconnect, to limit the effect of the OFF-TAJD. In addition to this, companies should implement policies to prevent intrusive leadership and workaholism.

Global anaesthesia workforce limitations contribute to emigration of skilled anaesthesiologists from lower- to higher-income countries, jeopardizing workforce balance and patient outcomes in Pakistan. This study aims to explore challenges experienced by anaesthesiologists in Punjab, Pakistan’s most populous province, and necessary changes to encourage their retention. We conducted a qualitative study to examine perspectives of anaesthesiologists who chose to serve in Pakistan. We drew data from semi-structured interviews conducted with 25 purposively-sampled consultant anaesthesiologists. We analysed data thematically and distinguished the practice hurdles faced by anaesthesiologists in public and private hospitals of Punjab. The main reasons to work abroad could be broadly categorized under two inductive themes, i.e. practice hurdles in public and private sector. Both had distinct issues which compromised the number and quality of anaesthesia workforce in the country. The key outcomes were workplace security, promotion/incentive issues and gender inequalities in the government sector. The private sector had improper salaries and facilities, anaesthesiologist’s dependency on surgeons for getting work and lack of out-of-theatre practice which minimise the scope and earnings of anaesthesiologist within the country. There is a need to overcome surgeon dependency and hospital manipulation by fixing salary percentages for each surgical case and encouraging direct patient-anaesthesiologist relationships.

Sword-duels are interesting, from a game-theoretical perspective, as they correspond to sudden-death interactions between players (i.e., defeat means removal from the game), and where victory/defeat depend on not just skill, but also luck. Analyzing probabilities of victory streaks, given a certain level of self and others' skill, is thus relevant for any application domain that can be modeled in the same way. This paper takes inspiration from Miyamoto Musashi, famously undefeated for 61 duels, and implements a Markov-chain Monte-Carlo simulation approach to evaluate this scenario. Results suggest that a 61 victory streak can be probabilistically observed when skill level is roughly 6.5 times that of the average duelist, and with 95\% confidence when skill level is roughly 1000 times that of the average duelist. More generally, this paper provides a method for determining chances of victory streaks in game-theoretical sudden-death encounters, when both "skill" and "luck" contribute to the outcome of the encounter. Specific scenarios can be modeled by modifying the utilized Markov chain and adjusting sampled distributions as required.

We numerically study surface models defined on hexagonal disks with a free boundary. 2D surface models for planer surfaces have recently attracted interest due to the engineering applications of functional materials such as graphene and its composite with polymers. These 2D composite meta-materials are strongly influenced by external stimuli such as thermal fluctuations if they are sufficiently thin. For this reason, it is very interesting to study the shape stability/instability of thin 2D materials against thermal fluctuations. In this paper, we study three types of surface models including Landau-Ginzburg (LG) and Helfirch-Polyakov models defined on triangulated hexagonal disks using the parallel tempering Monte Carlo simulation technique. We find that the planer surfaces undergo a first-order transition between the smooth and crumpled phases in the LG model and continuous transitions in the other two models. The first-order transition is relatively weaker compared to the transition on spherical surfaces already reported. The continuous nature of the transition is consistent with the reported results, although the transitions are stronger than that of the reported ones.

This paper offers a comprehensive examination of the process involved in developing and automating supervised end-to-end machine learning workflows for forecasting and classification purposes. It offers a complete overview of the components (i.e. feature engineering, model selection, etc), principles (i.e. bias-variance decomposition, model complexity, overfitting, model sensitivity to feature assumptions and scaling, output interpretability, etc), models (i.e. neural networks, regression models, etc), methods (i.e. Cross-Validation, data augmentation, etc), metrics (i.e. Mean Squared Error, F1-score, etc) and tools that rule most supervised learning applications with numerical and categorical data, as well as their integration, automation, and deployment. The end goal and contribution of this paper is the education and guidance of the non-AI expert academic community over complete and rigorous machine learning pipelines and data science practices, from problem scoping to design and state-of-the-art automation tools, including basic principles and reasoning in the choice of methods. The paper delves into the critical stages of supervised machine learning workflow development, many of which are often omitted by researchers due to brevity, and covers foundational concepts essential for understanding and optimizing a functional machine learning workflow, thereby offering a holistic view of task-specific application development for applied researchers who are not AI experts.

In the history of civil aircraft transportation, ice formation has been identifies as a key factor in the safety of flight. Anti-icing and deicing system have emerged through the years with the aim to prevent or to eliminate ice formation on wing airfoil, control surface and probes. Modern flying machine demand more efficiency in order to reduce the carbon footprint and increase the sustainability of flight transport. In order to achieve this goal the need to have efficient aircraft with efficient and low power consuming system is fundamental. This paper proposes a new model for ice accretion using computational fluid dynamics (CFD). This model permits to simulate the shape of the ice formed over a profile varying boundary conditions (i.e.- speed, liquid water content and so on). The proposed model takes into account also the amount of heat transferred between water and the surrounding environment and includes the effects of air turbulence on the ice formation process. The CFD simulations have been validated with NASA experimental outcome and show good agreement. The proposed model can be also used to investigate the effects of various parameters such as air speed, Liquid Water Content and air temperature on the ice formation process. The results evidences that the proposed model can accurately predict ice formation process and is suitable to optimize the design of anti-icing or deicing system for aircraft and helicopters. This approach is not limited to aerospace but can also be exported to other applications such as transportation, wind turbine, energy management and infrastructure.

Approximately 300 million non-cardiac surgeries are performed each year. Perioperative mortality after non-cardiac surgery is estimated at 2% in patients over 45 years of age . Half of these deaths are attributable to cardiovascular complications, and most to perioperative myocardial infarction (MINS). Before introduction of cardiac biomarkers the diagnosis of postoperative myocardial infarction was based on symptoms and electrocardiographic changes and its incidence was largely underestimated. The incidence of MINS when standard troponin assay is used ranges between 8 and 19% but increases to 20-30% whit high sensitivity troponin assays. Higher troponin values sugegsting myocardial injury , both with or without definite diagnosis of myocardial infarction, are associated with increased 30 day and 1-year mortality . Diagnostic and therapeutic strategies are reported .

The aim of this paper is to expose the main involved physical phenomena underlying the alteration of convective heat transfer in a heat exchanger subjected to imposed vibrations. This technique seems to have interesting features and industrial applications, such as efficiency increase, heat transfer rate control and cleanliness action. However, a clear description and comprehension of how vibrations may alter the convective heat transfer coefficient in a heat exchanger is no still reached due to the complexity of the involved physical mechanisms. For this reason, after a presentation and a schematisation of the analyzed thermodynamic system, the fundamental alterations of the thermo-fluid dynamics fields are described. Then, the main involved physical phenomena are exposed for the three cases of gaseous, monophasic liquid and boiling liquid mediums. Finally, on the basis of the characteristics of these described phenomena, some considerations and indications of general validity are presented.

Background: Absolute uterine factor infertility (AUFI) is a kind of infertility that is completely attributable to uterine absence (surgical or congenital for women with Mayer-Rokitansky-Küster-Hauser syndrome: MRKH) or anatomic or functional abnormality that prevents embryo implantation or completion of pregnancy to term. Until recently, the only viable option to parenthood for couples with AUFI were adoption or surrogacy. Since a first attempt of uterus transplant (UTx) in 2000, nine babies were born from women with a transplanted uterus from 2014, eight of which in Sweden, and one in the United States. These promising results are raising immense hopes for the women with AUFI and there is optimism about the possibility for UTx to become part of clinical care even though, besides encouraging results, the procedure has also resulted in increased risks and harms for both the donors and recipients and increased risks of premature birth for the fetus. At present UTx is still considered as experimental and requiring more research and safety assessment before becoming a therapeutic option for AUFI. The transition from experimental procedure to therapeutic care would result in less strict ethical scrutiny for UTx and in the possibility for patients to get reimbursement for the procedure by the relevant healthcare insurance or public healthcare providers. In turn, an increase in the number of UTx performed yearly by specialized surgical teams would result in a general improvement of the “field strength”. However, at present it is difficult to establish the amount of evidence that we need in order to consider UTx as no longer experimental but routine clinical practice. The literature on UTx provides recommendations on the different outcomes that should be monitored in this experimental phase but no study is anticipating the number of subjects that should be followed and for how long. Conclusion: As for other transplants that have become routine practice, like renal transplant and heart transplant, it is likely that the decision on “routine practice readiness” will result from available cumulated evidences, from expert capacity to find a consensus on best practices and on political considerations as well, including pressures form patients and patient groups.

The use of isolated supplements to enhance performance is widespread among athletes. The aim of this study was to increase knowledge about the combined effects of caffeine and New Zealand blackcurrant (NZBC) dietary supplements. In this study, two subjects each underwent four phases of four sessions in a double-blind and randomized alternating treatment single-case design. After a 3-week pre-test phase, the supplement combinations of placebo/placebo, caffeine/placebo (5 mg/kg), NZBC/placebo (600 mg), and caffeine/NZBC (5 mg/kg + 600 mg) were taken and weekly performance tests were conducted to examine their effects on relative power (W/kg) during a 20-minute time trial on a bicycle. Data were analyzed descriptively and using the Tau-U calculator from Single Case Research. The ergogenic effect of caffeine was confirmed in both subjects, with increases of 3.3% and 6.5%, while the positive effect of NZBC on performance was only seen in one subject (13.4%). The combination of caffeine and NZBC again increased performance in both subjects (2.2% and 19.2%), but the data only showed an additive effect of the supplements in one subject. Further studies are required to confirm or refute this evidence of the synergistic effects of these supplements.

For our research on droplet deformation and breakup in scaled high-pressure homogenizing units we developed a pressure stable inline droplet generator. It consists of an optically accessible flow channel with a combination of stainless steel and glass capillaries and a 3D printed orifice. The droplet size is determined online by live image analysis. The influence of the orifice diameter, the mass flow of the continuous phase and the mass flow of the disperse phase on the droplet diameter was investigated. Furthermore, the droplet detachment mechanisms were identified. Droplet diameters with small diameter fluctuation between 175 µm and 500 µm could be realized, which allows a precise adjustment of the Ca and We Number in the subsequent scaled high pressure homogenizer disruption unit. The determined influence of geometry and process parameters on the resulting droplet size and droplet detachment mechanism agreed well with literature on microfluidics. Furthermore, droplet trajectories in an exemplary scaled high-pressure homogenizer disruption unit are presented which show that the droplets can be reinjected on a trajectory close to the center axis or close to the wall, which should result in different stresses on the droplets.

Total edentulism is the loss of all teeth for any cause by a multifactorial process that involves biological and patient-related factors. Studies on edentulism and risk factors in Mexico are limited, and the epidemiological surveillance data is scarce and controversial since official governmental reports are not statistically representative of the country. We estimate the distribution for edentulism according to sociodemographic and socioeconomic variables in adults from a low-income state in 2003 and its progress in Mexico. We analyzed data from the National Performance Evaluation Survey in Oaxaca, Mexico, and the annual reports of the Epidemiological Surveillance System of Oral Pathologies in 2009-2019 using X². Oaxacan patients older than 75 y.o (17.9%, p<0.05), those with lower schooling (11.2%), and diabetes (14.5%) presented the highest percentage of edentulism. We do not observe differences in edentulism between sex or residence (p>0.05). From 2009 to 2019, country data reports the lowest rate of edentulism in adults over 20 y.o (0.32%; 95% CI 0.18%-0.48%) and the most affected population over 79 y.o. (7.29%; 95% CI 5.2%-9.30%). As it is a cumulative phenomenon, it is necessary to establish better surveillance, prevention, and treatment programs to improve the oral health of older thus reducing edentulism.

Monte Carlo Filtering (MCF) is one of the methods of Experimental Statistical Energy Analysis (E-SEA), which allows the correction of a negative LF (Loss Factor). In this article, a modification of the MCF method, called DESA (Diagonal Extension of the Search Area), is proposed. The technique applies a non-uniform extension of the search area when generating a population of normalized energy matrices. The degree of expansion of the search area is controlled by the Diagonal Penalty Factor (DPF). The authors demonstrated the method's effectiveness on a system that could not be identified in several frequency bands by the classical MCF method. After applying DESA, it was possible to fill in the problematic bands that were missing CLF and DLF values. The paper also proposes a way to minimize the errors introduced by using overly high DPF values.

The rational fabrication of low-dimensional materials with a well-defined topology and functions is an incredibly important aspect of nanotechnology. In particular, the on-surface synthesis (OSS) methods based on the bottom-up approach enable facile construction of sophisticated molecular architectures unattainable by traditional methods of wet chemistry. Among such supramolecular constructs especially interesting are surface-supported metal-organic networks (SMONs), composed of low-coordinated metal atoms and π-aromatic bridging linkers differing in size, shape and functionalization scheme. In this work, the lattice Monte Carlo (MC) simulation technique was used to extract the chemical information encoded in a family of Y-shaped positional isomers coadsorbed with trivalent metal atoms on a flat metallic surface with (111) geometry. For this purpose the investigated tritopic molecules/metal atoms were carefully mapped on a triangular lattice as interconnected/isolated segments with appropriatelly embedded anisotropic interactions. Depending on the intramolecular distribution of active centers (functional groups) within the simulated molecular bricks, we observed the metal-directed self-assembly of two-dimensional (2D) openwork patterns, aperiodic mosaics and metal-organic ladders. The obtained theoretical findings could be especially relevant for the scanning tunneling microscopy (STM) experimentalists interested in a surface-assisted construction of complex nanomaterials stabilized by directional coordination bonds.

Computationally modelling a nuclear reactor startup core for a benchmark against the existing models is highly desirable for an independent assessment informing nuclear engineers and energy policymakers. This work presents a startup core model of the UK’s first Evolutionary Pressurised Water Reactor (EPR) based on Monte Carlo simulations of particle collisions using Serpent 2, a continuous-energy Monte Carlo reactor physics burnup code. Coupling between neutronics and thermal-hydraulic conditions with the fuel depletion is incorporated into the multi-dimensional branches, obtaining the thermal flux and fission rate (power) distributions radially and axially from the three dimensional (3D) single assembly level to a 3D full core. Shannon entropy is employed to characterise the convergence of the fission source distribution, with 3 billion neutron histories tracked by parallel computing. Source biasing is applied for the variance reduction. Benchmarking the proposed Monte Carlo 3D full-core model against the traditional deterministic transport computation suite used by the UK Office for Nuclear Regulation (ONR), a reasonably good agreement within statistics is demonstrated for the safety-related reactivity coefficients, which creates trust in the EPR safety report.

In this paper the authors present a method which facilitates computationally efficient parameter estimation of dynamical systems from a continuously growing set of measurement data. It is shown that the proposed method, which utilises Sequential Monte Carlo samplers, is guaranteed to be fully parallelisable (in contrast to Markov chain Monte Carlo methods) and can be applied to a wide variety of scenarios within structural dynamics. Its ability to allow convergence of one's parameter estimates, as more data is analysed, sets it apart from other sequential methods (such as the particle filter).

Background: Limited research has explored sex-specific differences in death predictors of HF pa-tients with ischemic (iCMP) and nonischemic (niCMP) cardiomyopathy. This study assessed sex differences in niCMP and iCMP prognosis. Methods: We studied 7,487 patients with HF between February 2017 and September 2020. Clini-cal features and echocardiographic findings were collected. We used Kaplan-Meier, Cox propor-tional hazards models, and score chi-square of Cox regression to determine death predictors in women and men. Results: mean age was 64.3±14.2 years, with 4,417 (59%) males. Women with iCMP and niCMP exhibited significantly higher mean age, higher mean left ventricular ejection fraction, and smaller left ventricular diastolic diameter than men. Over 2.26 years of follow-up, 325 (14.7%) women and 420 (15.7%) men, and 211 women (24.5%) and 519 men (29.8%) died in niCMP (p=NS) and iCMP (p=0.004), respectively. Cumulative incidence of death was higher in men with iCMP (log-rank p<0.0001) but similar in niCMP. Cox regression showed chronic kidney disease, dia-betes, stroke, atrial fibrillation, age, and myocardial infarction, as main predictors of death for iCMP in women and men. Conclusion: Women exhibited a better prognosis than men in iCMP, but similar for niCMP. Nevertheless, sex was not an independent predictor of death for both CMP.

Fourier transform infrared (FTIR) absorption spectroscopy of cold molecules and clusters in supersonic slit jet expansions complements and extends more sensitive action spectroscopy techniques and provides important reference data for the latter. We describe how its major drawback, large substance and carrier gas consumption, can be alleviated by one to two orders of magnitude via direct and continuous recycling of the gas mixture. This is achieved by a combination of dry rotary lobe and screw pump compression. The signal-to-noise ratio is boosted by the established buffered giant gas pulse technique with full interferogram synchronization. The buildup of water impurities typically limits the recycling gain, but is turned into a feature for the study of hydrate complexes of volatile molecules. Continuous operation with a single gas filling over several days becomes practical and useful. Decadic absorbances in the low ppm range are detectable and the mid infrared range can be recorded simultaneously with the near infrared. The less straightforward hydration number assignment of spectral features in direct absorption spectroscopy is supported by a gradual water buildup at a rate of less than 0.5 mg/h. A recent reassignment proposal for the water dimer OH stretching spectrum is refuted and vibrational spectra of vacuum-isolated 18O-water clusters are presented for the first time. Methanol docking on asymmetric ketones is used to illustrate the advantages and limitations of the recycling concept. Previous assignments of the hydrate complex of 1-phenylethanol are confirmed. Additional features of the setup await testing and refinement, but the recycling technique already substantially widens the applicability of direct absorption spectroscopy of neutral molecular clusters. It may be attractive for other high-throughput jet spectrometers.

We have studied the stochastic processes A and B concerning fade durations due to rain, by simulating attenuation time series A(t) (dB) in the zenith paths of GeoSurf satellite constellations, at sites located in different climatic regions, with the Synthetic Storm Technique. Process B gives the statistics of outages (occurrences), process A gives the statistics of outage duration (fraction of time), for the same rain attenuation threshold A(t)&gt;S. The two processes are not independent, therefore, we have studied the relationship between their probabilities and defined a uniformity index 0&lt;U(S)≤1. U(S) is useful for comparing real cases – fade durations fragmented in many different intervals, with changing S and site – and the limiting case of all fades lasting the same time. As S increases, U(S) increases, approaching 1 at very large thresholds. These results should guide the designers of future GeoSurf satellite constellations to consider the impact of A(t) on the diverse communications services. Process B (occurrences) impacts on non–real time services, such as data delivery, more disturbed by the number of outages rather than by their duration. Process A (fraction of time) impacts on real–time services such as television, video conference etc., more disturbed by the duration of the outage.

Link prediction is an iconic problem in complex networks because deals with the ability to predict nonobserved existing or future parts of the network structure. The impact of this prediction on real applications can be disruptive: from prediction of covert links between terrorists in their social networks to repositioning of drugs in molecular diseasome networks. Here we compare: (1) an ensemble meta-learning method (Ghasemian et al.), which uses an artificial intelligence (AI) stacking strategy to create a single meta-model from hundreds of other models; (2) a structural predictability method (SPM, Lü et al.), which relies on a theory derived from quantum mechanics and does not assume any model; (3) a modelling rule named Cannistraci-Hebb (CH, Muscoloni et al.), which relies on one brain-bioinspired model adapting to the intrinsic network structure.We conclude that brute-force stacking of algorithms by AI does not perform better than (and is often significantly outperformed by) SPM and one simple brain-bioinspired rule such as CH. This agrees with the Gödel incompleteness: stacking is optimal but incomplete, you cannot squeeze out more than what is already in your features. Hence, we should also pursue AI that resembles human-like physical ‘understanding’ of simple generalized rules associated to complexity. The future might be populated by AI that ‘steals for us the fire from Gods’, towards machine intelligence that creates new rules rather than stacking the ones already known.

Inherited platelet disorders (IPDs) are rare diseases featured by low platelet count and/or defective platelet function. Patients have variable bleeding diathesis and sometimes additional features that can be congenital or acquired. Identification of an IPD is desirable to avoid misdiagnosis of immune thrombocytopenia and use of improper treatments. Diagnostic tools include platelet function studies and genetic testing. The latter can be challenging as the correlation of its outcomes with phenotype is not easy. The immune-morphological evaluation of blood smear (by light- and immunofluorescence microscopy) represents a reliable method to phenotype subjects with suspected IPD. It is relatively cheap, not excessively time-consuming, and applicable to shipped samples. In some forms, it can provide diagnosis by itself, as for MYH9-RD, or in addition to other first-line tests as aggregometry or flow cytometry. In regard to genetic testing, it can guide specific sequencing. Since only minimal amounts of blood are needed for preparation of blood smears, it can be used to further characterize thrombocytopenia in pediatric patients and even newborns. In principle it is based on visualizing alterations in the distribution of proteins, which result from specific genetic mutations, by using monoclonal antibodies. It can be applied to identify deficiencies in membrane proteins, disturbed distribution of cytoskeletal proteins, and alpha as well as delta granules. On the other hand mutations associated with impaired signal transduction are difficult to identify by immunofluorescence of blood smears. This review summarizes technical aspects and the main diagnostic patterns achievable by this method.

The stiffness of the myosin cross-bridges is a key factor in analysing possible scenarios to explain myosin head changes during force generation in active muscles. The seminal study of Huxley and Simmons (1971: Nature 233: 533) suggested that most of the observed half-sarcomere instantaneous compliance (=1/stiffness) resides in the myosin heads. They showed with a so-called T₁ plot that, after a very fast release, the half-sarcomere tension reduced to zero after a step size of about 60Å (later with improved experiments reduced to 40Å). However, later X-ray diffraction studies showed that myosin and actin filaments themselves stretch slightly under tension, which means that most (at least two-thirds) of the half sarcomere compliance comes from the filaments and not from cross-bridges. Here we have used a different approach, namely to model the compliances in a virtual half sarcomere structure in silico. We confirm that the T₁ curve comes almost entirely from length changes in the myosin and actin filaments, because the calculated cross-bridge stiffness (probably greater than 0.4 pN/Å) is higher than previous studies have suggested. In the light of this, we present a plausible modified scenario to describe aspects of the myosin cross-bridge cycle in active muscle. In particular, we suggest that, apart from the filament compliances, most of the cross-bridge contribution to the instantaneous T₁ response comes from weakly-bound myosin heads, not myosin heads in strongly attached states. The strongly attached heads would still contribute to the T₁ curve, but only in a very minor way, with a stiffness that we postulate could be around 0.1 pN/Å, a value which would generate a working stroke close to 100 Å from the hydrolysis of one ATP molecule. The new program can serve as a tool to calculate sarcomere elastic properties for any vertebrate striated muscle once various parameters have been determined (e.g. tension, T₁ intercept, temperature, X-ray diffraction spacing results).

Background: Lithium di-silicate dental ceramics bonding, realized by using different resins, is strictly dependent on micro-mechanical retention and chemical adhesion. The aim of this in vitro study was to investigate the capability of a 1070 nm fiber laser for their surface treatment. Methods: Samples were irradiated by a pulsed fiber laser at 1070 nm with different parameters (Peak Power from 5 kW to 5 kW, RR 20 kHz, speed from 10 to 50 mm/s, total Energy Density from 1.3 to 27 kW/cm²) and the thermal elevation during the experiment was recorded by a Fiber Bragg Grating (FBG) temperature sensor. Subsequently, the surface modifications were analysed by optical microscope, Scanning Electron Microscope (SEM) and Energy Dispersive X-ray Spectroscopy (EDS). Results: With a Peak Power of 5 kW, RR of 20 kHz and speed of 50 mm/s, the microscopic observation of the irradiated surface showed increased roughness with small areas of melting and carbonization. EDS analysis revealed that, with these parameters, there are no evident differences between laser-processed samples and controls. Thermal elevation during laser irradiation ranged between 5 °C and 9 °C. Conclusions: 1070 nm fiber laser can be considered as a good device to increase the adhesion of Lithium di-silicate ceramics.

Unlike electron microscopy, which can achieve very high resolutions, but to date can only be used to study static structures, time-resolved X-ray diffraction from contracting muscles can, in principle, be used to follow the molecular movements involved in force generation on a millisecond timescale albeit at moderate resolution. However, previous X-ray diffraction studies of resting muscles have come up with structures for the head arrangements in resting myosin filaments that are different from the apparently ubiquitous interacting heads motif (IHM) found by single particle analysis of electron micrographs of isolated myosin filaments from a variety of muscle types. This head organization is supposed to represent the super-relaxed state of the myosin filaments where ATP usage is minimized. Here we have tested whether the interacting heads motif structures will satisfactorily explain the observed low-angle X-ray diffraction patterns from resting vertebrate (bony fish) and invertebrate (insect flight) muscles. We find that the interacting heads motif does not, in fact, explain what is observed. Previous X-ray models fit the observations much better. We conclude that the X-ray diffraction evidence has been well interpreted in the past and that there is more than one ordered myosin head state in resting muscle. There is, therefore, no reason to question some of the previous X-ray diffraction results on myosin filaments; time-resolved X-ray diffraction should be a reliable way to follow crossbridge action in active muscle and may be one of the few ways to follow molecular changes in myosin heads on a millisecond timescale as force is actually produced.

Precision medicine emphasizes fine-grained diagnostics, taking individual variability into account to enhance treatment effectiveness. Parkinson's Disease (PD) heterogeneity among individuals is a proof that disease subtypes exist, and assigning individuals to subgroups is necessary for a better understanding of disease mechanisms and designing precise treatment approaches. The purpose of this study was to identify PD subtypes using RNA-Seq data in a combined pipeline including unsupervised machine learning, bioinformatics, and network analysis. 210 post mortem brain RNA-Seq samples from PD (n = 115) and Normal Controls (NC, n = 95) were obtained with a systematic data retrieval following PRISMA statements and a fully data-driven clustering pipeline was performed to identify PD subtypes. Bioinformatics and Network analyses were performed to characterize the disease mechanisms of the identified PD subtypes and to identify target genes for drug repurposing. Two PD clusters were identified and 42 DEGs were found (p.adjusted ≤ 0.01). PD clusters had significantly different gene network structures (p &lt; 0.0001) and phenotype-specific disease mechanisms, highlighting the differential involvement of the Wnt/β-catenin pathway regulating adult neurogenesis. NEUROD1 was identified as a key regulator of gene networks and ISX9 and PD98059 were identified as NEUROD1-interacting compounds with disease-modifying potential, reducing the effects of dopaminergic neurodegeneration. This hybrid data analysis approach could enable precision medicine applications by providing insights for the identification and characterization of pathological subtypes. This workflow has proven useful on PD brain RNA-Seq, but its application to other neurodegenerative diseases is encouraged.

The assessment of seismic risk in urban areas with high seismicity is certainly one of the most important problems that territorial managers have to face. A reliable evaluation of this risk is the basis for the design of both specific seismic improvement interventions and emergency management plans. Unappropriate seismic risk assessments may provide misleading results and induce bad decisions with relevant economic and social impact.The seismic risk in urban areas is mainly linked to three factors, namely, “hazard”, “exposure” and “vulnerability”. Hazard measures the potential of an earthquake to produce harm; exposure evaluates the amount of population exposed to harm; vulnerability represents the proneness of considered buildings to suffer damages in case of an earthquake. Estimates of such factors may not always coincide with the perceived risk of the resident population. The propensity to implement structural seismic improvement interventions aimed at reducing the vulnerability of buildings depends significantly on the perceived risk.This paper investigates on the difference between objective and perceived risk and highlights some critical issues. The aim of this study is to calibrate opportune policies, which allow addressing the most appropriate seismic risk mitigation options with reference to current levels of perceived risk. We propose the introduction of a Seismic Policy Prevention index (SPPi). This methodology is applied to a case-study focused on a densely populated district of the city of Catania (Italy).

Fumaric acid esters (FAEs) are small molecules with anti-oxidative, anti-inflammatory and immune-modulating effects. Dimethyl fumarate (DMF) is the best characterised FAE and is approved and registered for the treatment of psoriasis and Relapsing-Remitting Multiple Sclerosis (RRMS). Psoriasis and RRMS share an immune-mediated aetiology, driven by severe inflammation and oxidative stress. DMF, as well as monomethyl fumarate and diroximel fumarate, are commonly prescribed first-line agents with favourable safety and efficacy profiles. The potential benefits of FAEs against other diseases that appear pathogenically different but share the pathologies of oxidative stress and inflammation are currently investigated.

Breaching and liquefaction are two types of coastal flow slides proposed in the literature. While their final results are similar, liquefaction and breaching failure are two different processes, with breaching failure characterized by a different progression and sand movement mechanisms. In densely packed sand, breaching causes delayed sand grain discharge and negative excess pore pressures. Liquefaction, when a mass of soil suddenly behaves like a liquid, flow out over overly gentle slopes. Flow slides typically go unnoticed until the slope fails above ground because they start below the water. Without modern technology, diving equipment, risk assessment, and probabilistic and sensitivity assessments, flow slides inherently challenging. The authors developed a new sensitivity index to detect the susceptibility of coastal flow slides. It was established a sophisticated hybrid model that accommodates flow slides in sync with unpredictable variables employed in this new sensitivity index. Innovative hybrid model has three distinctive models. The Hybrid Hydrodynamic Model addresses wave, wind, current, climate change, and sediment transfer. The Monte Carlo Simulation analyses sensitivity, and the Bayesian Network calculates joint probability of coastal flow slide parameters of this new index that includes environmental characteristics, including climate change. With the assistance of these three models, researchers aim at a) presenting a methodology for coupling coastal flow slide projections with outcomes; b) distinguishing two flow slides; c) examining variables influencing flow slides. The use of such a hybrid model and risk index offers a robust and computationally efficient approach to evaluating the critical angle slope for breaching failure.

Today, various questionnaires are available to assess Adverse Childhood Experiences (ACEs) in children; however, it is uncertain if these questionnaires comprehensively address the adversities of vulnerable subgroups, specifically refugee children. This review's objectives are to (1) identify current ACE questionnaires and determine if they are suitable for assessing refugee children’s adversities, and (2) identify those previously used within a refugee population. A systematic literature search was conducted across five databases for articles published since 2010, including studies using an ACE questionnaire that recognized multiple adversities in healthy children and were published in English. A total of 103 ACE questionnaires were identified in 506 studies. Only 14 of the 103 questionnaires addressed a refugee-specific adversity. Their ability to capture refugee children’s experiences was limited: available questionnaires used a maximum of three items to assess refugee-specific adversities, covering only a fraction of forms of adversities relevant to refugee children. Psychometric characteristics were rarely reported. In addition, only two ACE questionnaires were used within a refugee population. With the tools currently available, it is not possible to comprehensively assess the exposure to and severity of the adversities faced by refugee children. The perpetuation of ongoing crises necessitates assessing refugee children's adversities to understand how their well-being is affected and to identify children at risk.

Bovine herpesvirus (BoHV)-5 is a worldwide distributed pathogen usually associated with a lethal neurological disease (meningoencephalitis) in dairy and beef cattle resulting in important economic losses due to the cattle industry. Using recombinant glycoprotein D of BoHV-5 (rgD5), we evaluated the long-duration humoral immunity of the recombinant vaccines in a cattle model. Here we report that two doses of intramuscular immunization, particularly with the rgD5ISA vaccine, are superior to iBoHV-5ISA immunization in the induction of long-lasting antibody responses. Recombinant gD5 antigen elicited tightly mRNA transcription of the Bcl6 and the chemokine receptor CXCR5 which mediate memory B cells and long-lived plasma cells in germinal centers (GCs). In addition, using an in-house Enzyme-Linked Immunosorbent Assay (ELISA) we observed higher and earlier responses of rgD5-specific IgG antibody and the upregulation of mRNA transcription of IL2, IL4, IL10, IL15 and IFN-γ cytokines in rgD5 vaccinated cattle, indicating a mixed immune response. We further show that rgD5 immunization provides protection against both BoHV -1 and -5. Our findings indicate that the rgD5-based vaccine represents an effective vaccine strategy to induce an efficient control of alpha-herpesviruses.

The relative paucity of donor livers suitable for transplantation has sparked innovations to preserve and recondition organs to expand the pool of transplantable organs. Currently, machine perfusion techniques have led to the improvement of the quality of marginal livers and to prolonged cold ischemia time and allowed for the prediction of graft function through analysis of the organ during perfusion, improving the rate of organ use. In the future, the implementation of organ modulation might expand the scope of machine perfusion beyond its current usage. The aim of this review was to provide an overview of the current clinical use of machine perfusion devices in liver transplantation and provide a perspective for future clinical use, including therapeutic interventions in perfused donor liver grafts.

An important surgical goal is to provide a first intention wound healing without trauma produced by sutures and for this aim in the past several methods have been tested. The aim of this preliminary ex vivo study is to demonstrate the capacity of a 1070 nm pulsed fiber laser to treat the dental fractures by dentine melting with the apposition of hydroxyapatite nanoparticles as filler. Only the specimens of the group b showed a real process of welding of the two parts, while specimens of groups a and c did not reach a complete welding process. Out of thirty freshly-extracted human third molars, decay-free, twenty-four cylinders of 5 mm thickness were obtained to perform the test. The device used was a 1070 nm Yb-doped pulsed fiber laser: this source has a maximum average output power of 20 W and a fixed pulse duration of 100 ns, while the repetition rate ranges from 20 kHz to 100 kHz. The samples were divided in three groups (a, b, c) of eight teeth and each specimen, with the two portions strictly placed side by side, was put inside the box and irradiated three times, the first and the second at 30 kW and the last at 10 kW power. The frequency was maintained at 20 kHz for all the tests as well as the speed of the beam at 10 mm/sec. The samples of the group a were irradiated without apposition, in the group b nanoparticles (<200 nm) of hydroxyapatite were put in the gap between the two portions while in the group c, a powder of hydroxyapatite was employed. Only the specimens of the group b showed a real process of welding of the two parts, while specimens of groups a and c did not reach a complete welding process.

In the realm of computer vision, semantic segmentation is the task of recognizing objects in images at the pixel level. This is done by performing a classification of each pixel. The task is complex and requires sophisticated skills and knowledge about the context to identify objects’ boundaries. The importance of semantic segmentation in many domains is undisputed. In medical diagnostics, it simplifies the early detection of pathologies, thus mitigating the possible consequences. In this work, we provide a review of the literature on deep ensemble learning models for polyp segmentation and we develop new ensembles based on convolutional neural networks and transformers. The development of an effective ensemble entails ensuring diversity between its components. To this end, we combine different models (HarDNet-MSEG, Polyp-PVT, and HSNet) trained with different data augmentation techniques, optimization methods, and learning rates, which we experimentally demonstrate to be useful to form a better ensemble. Most importantly, we introduce a new method to obtain the segmentation mask which is more suitable for combining transformers in an ensemble. In our extensive experimental evaluation, the proposed ensembles exhibit state-of-the-art performance.

At 12:28 UTC (8:28 PM, local time) on 15 January 2023, a shallow, moderate earthquake with a magnitude (Mw) of 4.7 and a depth of one (1) kilometer shook the northern part of Leyte Island in the central part of the Philippines. The ground shaking was felt at PHIVOLCS Earthquake Intensity Scale (PEIS) VI, (very strong) equivalent to Modified Mercalli Intensity (MMI) VI in areas along the strike of the Leyte segment of the Philippine Fault. Even though this earthquake is classified as moderate in size, significant geologic, structural, and socio-economic impacts were documented. Most of the earthquake impacts that include surface rupture, liquefaction, and mass movements are limited near the epicentral area. The earthquake produced an 8-km-long surface rupture, the first documented rupture generated by a magnitude &lt;6 along the Philippine Fault, and is unusual in other surface rupturing earthquakes worldwide. It injured 18 persons and damaged 434 residential buildings and 26 public infrastructures which amounts to about 500 thousand US dollars. Structural damages were caused by surface rupture and/or poor engineering construction practices. Analysis of the seismic waveform and recorded peak ground acceleration (PGA) suggests that the subsurface geology influenced the ground motion amplification in an area near the epicenter. Based on the hypocenter, focal mechanism solution, aftershock distribution, and actual field observation, the causative fault for this event is the northern end of the Philippine Fault – Leyte segment. Moderate in size, this earthquake emphasizes the need and importance of documenting moderate-sized earthquakes as a tool and guide for medium and long-term earthquake risk assessment and resiliency.

While there are extensive studies on the mineralogy and geochemistry of laterites worldwide, the temporal and spatial mineralogical development of a typical nickel laterite profile is still poorly constrained. In this study, we present a detailed mineralogical and geochemical characterization of samples systematically collected from a nickel laterite profile at the Sta. Cruz nickel laterite deposit, Zambales, Philippines, to describe the temporal and spatial development of the laterite profile. Wavelength-dispersive X-ray fluorescence spectroscopy (WDSXRF), mass balance-element mobility calculations, transmitted and reflected light microscopy, and previously reported results from coupled X-ray diffraction (XRD) and Rietveld refinement analyses, reveal that the laterite profile investigated is composed of two main horizons: the limonite and saprolite zones, separated by a thin transitional zone. The main zones are further subdivided into subzones based primarily on the mineral assemblage and major element chemistry: upper limonite, lower limonite, transitional zone, upper saprolite, and lower saprolite. Late-stage Ni-rich serpentine veins were observed cutting the upper and lower saprolite subzones. Investigation of the structure of goethite within the limonite zone via Rietveld refinement show that the crystallinity of goethite decreases with increasing Ni content and increasing crystallite size. This suggests that upwards through the limonite zone, as goethite ages, its crystallinity increases which possibly results in the removal of Ni from its crystal structure and eventual remobilization to the lower laterite zones. We propose a genetic model of the formation of the Sta. Cruz laterite consisting of four stages: (1) early-stage alteration, (2) continued serpentinization and volume expansion, (3) late stage serpentinization, dissolution, and incipient oxide formation, and (4) goethite ageing and Ni-rich serpentine vein formation. Overall, our results suggest that serpentinization is an important aspect of Ni laterite formation, both before and after the emplacement of the peridotite protolith.

The real-world outcomes of patients with metastatic prostate cancer (mPCa) are largely unexplored. We investigated the improvements in overall survival (OS) and cancer-specific survival (CSS) in patients with de novo mPCa in latest years. The USA SEER Research Data (2000-2017) were analyzed using the SEER*Stat software. The Kaplan-Meier method and Cox regression were used. Patients with de novo mPCa were allocated to 3 cohorts based on year of diagnosis: A (2000-2003), B (2004-2010), C (2011-2014). Maximum follow-up was fixed to 5 years. Overall, 26434 patients were included. Age, race and metastatic stage significantly affected OS and CSS. After adjustment for age and race, patients in cohort C showed 9% reduced risk of death (HR:0.91 [95% CI, 0.87-0.95], p&lt;0.001) and 8% reduced risk of cancer-specific death (HR:0.91 [95% CI, 0.87-0.95], p&lt;0.001) compared to those in cohort A. After adjustment for age, race and metastatic stage, patients in cohort C showed an improvement in OS and CSS compared to cohort B (HR:0.94 [95% CI, 0.91-0.97], p=0.001 and HR:0.89 [95% CI, 0.85-0.92], p&lt;0.001). Patients with M1c disease had a more pronounced improvement in OS and CSS compared with the other stages. No differences were found between cohort B and C. In conclusion, the prognosis of de novo mPCa remains poor with a median OS of 30 months and a median CSS of 35 months. Limited OS and CSS improvements were observed in latest years.