For our research on droplet deformation and breakup in scaled high-pressure homogenizing units we developed a pressure stable inline droplet generator. It consists of an optically accessible flow channel with a combination of stainless steel and glass capillaries and a 3D printed orifice. The droplet size is determined online by live image analysis. The influence of the orifice diameter, the mass flow of the continuous phase and the mass flow of the disperse phase on the droplet diameter was investigated. Furthermore, the droplet detachment mechanisms were identified. Droplet diameters with small diameter fluctuation between 175 µm and 500 µm could be realized, which allows a precise adjustment of the Ca and We Number in the subsequent scaled high pressure homogenizer disruption unit. The determined influence of geometry and process parameters on the resulting droplet size and droplet detachment mechanism agreed well with literature on microfluidics. Furthermore, droplet trajectories in an exemplary scaled high-pressure homogenizer disruption unit are presented which show that the droplets can be reinjected on a trajectory close to the center axis or close to the wall, which should result in different stresses on the droplets.

With metal oxide semiconductors being a promising candidate for accurate indoor air quality assessments, multiple drawbacks of the gas sensors prevent their widespread use. Examples include poor selectivity, instability over time, and sensor poisoning. Complex calibration methods and advanced operation modes can solve some of those drawbacks. However, this leads to long calibration times, which are unsuitable for mass production. In recent years, multiple attempts to solve calibration transfer have been made with the help of direct standardization, orthogonal signal correction, and many more methods. Besides those, a new promising approach is transfer learning from deep learning. This article will compare different calibration transfer methods, including direct standardization, piecewise direct standardization, transfer learning for deep learning models, and global model building. The machine learning methods to calibrate the initial models for calibration transfer are feature extraction, selection, and regression (established methods) and a custom convolutional neural network TCOCNN. It is shown that transfer learning can outperform the other calibration transfer methods regarding the root mean squared error, especially if the initial model is built with multiple sensors. It was possible to reduce the number of calibration samples by up to 99.3 % (from 10 days to approximately 2 hours) and still achieve an RMSE for acetone of around 18 ppb (15 ppb with extended individual calibration) if six different sensors were used for building the initial model. Furthermore, it was shown that the other calibration transfer methods (direct standardization and piecewise direct standardization) also work reasonably well for both machine learning approaches, primarily when multiple sensors are used for the initial model.

While L-PBF offers advantages in terms of geometrical freedom or lightweight construction, its use is often limited by economic constraints or currently achievable part costs. With an anticipated increase of L-PBF machine productivity during the next years, an increase of the share of material costs and the share of non-productive time for powder layer application process is to be expected. This results in a demand for less expensive powder materials and advanced processing strategies for the short-and medium-term advancement of L-PBF. As one possible approach, the processing of gas- and water atomized stainless steel (316L) powders with different morphology and particle size distribution as well as their impact on L-PBF productivity is investigated. The actual powder applicability in L-PBF systems and the L-PBF processability determines the minimum necessary powder quality. The main focus of the presented work is put on the interaction between powder quality, powder layer properties, part quality and cost-effectiveness of the L-PBF process. To this end, the influence of the gas and water-atomized powder properties (particle size and morphology) during the powder layer application process at highest possible powder recoater speeds and the resulting powder bed properties (powder layer density, powder bed density, powder demixing) and part properties (part density and tensile strength) is investigated.

For a linear ordinary differential equation (ODE in short) of the third order, results are presented that supplement the theory of conjugate points and extremal solutions by W. Leighton, Z. Nehari, M. Hanan. It is especially noted the sensitivity of solutions to the initial data, which makes their numerical study difficult. Similar results were obtained for the third-order nonlinear equations of the Emden-Fowler type.

Dysmenorrhea symptoms are frequent and often self-treated using non-prescription medicines. To further characterize women with dysmenorrhea using a combination of hyoscine butylbromide and paracetamol (PLUS) for self-management of their complaints, we performed a secondary analysis of a published pharmacy-based patient survey. 314 women (mean age 32.3 years) with dysmenorrhea reported a pain and cramps intensity of 7.45 ± 2.13 on a 0-10 Likert scale, which was reduced to 2.86 ± 1.81 upon treatment. Associated impairments of work/daily chores, leisure activities, and sleep were improved by 64.6%, 62.2% and 70.4%, respectively. The onset of symptom relief was within 60 min in 84.7%. Tolerability was rated as very good or good by 97.2%. These findings confirm the efficacy and tolerability data on PLUS from randomized controlled trials in a larger group of women conducting self-management of their dysmenorrhea.

Ongoing investigations have highlighted that MIM of Mg shows high potential for mass production of small lightweight components as well as of degradable implants with complex geometry. However, prior research activities have shown that Mg reacts sensitively to atmosphere impurities like oxygen and specific thermal decomposition products of the used backbone polymers. Polyethylene based polymers reveal a negative influence on sintering of Mg while polypropylene based polymers behave uncritically. This work is highlighting that when hydrogen instead of argon atmosphere is used during sintering, the negative influence caused by carbon residuals at the particle boundaries can be prevented. Mg-0.9Ca elongation increased with a slight decrease in UTS revealing a strengthening effect of the carbon residuals at the particle boundaries. For pure Mg UTS could be increased from 7 MPa up to 80 MPa with elongation of 6% showing the positive effect of hydrogen on the sintering of Mg.

The development of small scale hydroelectric power plants in Norway is determined by natural conditions, policies, attitudes and property rights. The owner of the river is the central decision maker. It is he who decides whether he will develop the power plant himself, Whether he wants to enter into a contract with an external investor and let him develop the power plant, whether he will sell his property rights or postpone the decisions. All available choices will involve risk. In order for him to make the best choice he must find the certainty equivalent to each of the choices and choose the one with the highest certainty equivalent. This is the first time the utility theory of John von Neumann and Oskar Morgenstern has been applied to decision makers in the hydro power industry in Norway.

The elastic wave equation with the seismic tensorial force is solved in a homogeneous and isotropic medium (the Earth). Spherical-shell waves are obtained, which are associated to the primary P and S seismic waves. It is shown that these waves produce secondary waves with sources on the plane surface of a half-space, which have the form of abrupt walls with a long tail, propagating in the interior and on the surface of the half-space. These secondary waves are associated to the seismic mainshock. The results, previously reported, are re-derived by using Fourier transformations and specific regularization procedures. The relevance of this seismic motion for the ground motion, the seismographs' recordings and the effect of the inhomogeneities in the medium are discussed.

For a long time, there has been interest in the relationship between personality traits and life satisfaction. However, many previous studies suffer from small sample sizes or selective sampling, sometimes leading to biased or imprecise results. The current study, which focuses on the trait of extraversion, attempts to overcome these limitations by using a large-scale German survey of more than 40,000 individuals aged 10 to 72. As the descriptive and regression results clearly show, there is a statistically significant relationship between extraversion and several dimensions of current life satisfaction. Depending on the type of satisfaction, the unstandardized regression coefficients range from 0.18 to 0.33. To gain further insight, age is added as an explanatory variable to test whether these associations change as a person ages. The results show that the effect sizes sometimes differ by age but remain robust and statistically significant. In conclusion, the study adds to the literature by providing convincing evidence that extraversion and life satisfaction are positively associated, at least in Western and industrialized countries, and that there are interaction effects with age.

Background.Nurse gives professional nursing service to patients according to competence owned. Based on these services in the end of every year, nurses are given incentives for medical services as financial incentive. Purpose. To analyze the impact of competence training and incentives medical services’ distribution upon the achievement of nurse’s performances in General Hospital of W. Z. Johannes Kupang. Matterial and method. Observational survey research with cross sectional design. Population. Nurses in General Hospital of W. Z. Johannes Kupang. Technique. Total sampling technique with number of samples 183 respondents. Inclusive criteria of samples are willing to be interviewed, nurse’s status, permanent offices without limitation from particular working unit or poly in hospital. Independent variable: (1) competence training; (2) Incentives for medical services. Dependent variable; Nurse’s performance achievement. Variables are measured by using Lickert scale. Information are recorded through questionnaire. Analyzes using linier regression. Result. There are impacts of competence training (α=.000;ß=.489)and distribution of incentives for medical services(α=.012; ß=.152)upon nurse’s performances achievement in General Hospital of Prof.W. Z. Johannes Kupang. Conclusion.The training of nursing service status that could increase competences among nurses with affair incentives for medical services’ distribution simultaneously end up in the increasing of nurse’s performances achievement in a hospital

This paper will argue that memory from early childhood underlies many practices and beliefs that we commonly refer to as “religious”. The consciousness of young children does not yet have certain features that characterizes adult consciousness. This paper will concentrate on four of these: (I) a reality that is recognizable; (II) a sense of temporal duration; (III) a sense of self; (IV) an experience of the world that is deeply affected by our acquaintance with (a) language. Absence of these features presumably characterizes the consciousness of infants. It also often characterizes mystical experiences. The paper will argue that the human tendency to engage in so-called religious practices and beliefs makes most sense on the assumption that adults somehow preserve the memory of their state of being in childhood.

This paper proposes to study mystical experience by contrasting it with “ordinary” experience, i.e., with standard consciousness. It emphasises the construed nature of standard consciousness and the role that the mutual connectedness of mental contents plays in its construction. It then shows that removal of the factors that are responsible for the “making” of standard consciousness accounts for the principal features of mystical experience; these features are therefore mainly negative. The understanding of mystical experience as the suppression of factors that contribute to the construction of standard consciousness, along with a discussion of the mechanism that makes this possible, permits answers to some frequently asked questions, such as: why is mystical experience ineffable? what is its epistemic status? does it have implications for our understanding of mind, consciousness, and self?

Multiple imputation by chained equations (MICE) is a popular and well-researched statistical approach to account for missing data in empirical research. However, applying the technique requires researchers to set dozens of smaller and larger parameters to build an adequate imputation model before estimating the analytical model of interest. It is somewhat unclear how severely small and potentially arbitrary decisions influence the quality of the produced findings. The current study tests this empirically using a simulation approach with datasets with low and high shares of missing data points that are missing at random (MAR). For each of the two specifications, 4,200 simulations are conducted where multiple parameters are randomly varied to create a diverse range of potential imputation models. The results demonstrate that even random imputation models can significantly reduce bias compared to listwise deletion since more than 90% of all simulations give less biased results. All minor decisions taken together explain between 11% and 21% of the variation in the statistics of interest. The most substantial influence on this variation is due to the selection of the imputation algorithm within MICE. These findings demonstrate that almost any imputation model, even those built with little care, will often result in a higher quality than applying listwise deletion, as long as critical assumptions, such as MAR and the avoidance of severe misspecifications, hold.

Regression models are highly popular in empirical research and come in many different forms to fit virtually any distribution, variable, or research question. Usually, these models also compute how much variation in the outcome variable can be explained by all predictors, which is relevant to understanding whether the predictors are, in sum, able to explain the outcome or whether other potentially unobserved factors are more relevant. This aspect is crucial for interventions and policy as even statistically significant regression coefficients can be meaningless if they have little influence on the outcome overall. Besides having a measurement to judge the overall goodness of fit, ranking predictors by their relative importance is also relevant. For such analyses, it is necessary to decompose the total explanatory power of a model and partition it so that each explanatory variable is assigned a share. This enables the computation of a predictor variable's absolute and relative influence. Dominance analysis is a statistical approach to achieve this goal.

Multiple imputation with chained equations (MICE) is a widespread approach to account for missing data in empirical research. Combining MICE with bootstrapping, that is, repeatedly resampling with replacement from the data to estimate variances and confidence intervals of statistics of interest, is not straightforward. The current document provides an overview of how to use bootstrapping with imputed data in Stata. Two main approaches (impute first and then bootstrap or vice-versa) are discussed and shortly compared. Code is provided for Stata.

The evolutionary origin of the genome remains elusive. Here, I hypothesize that its first iteration, the protogenome, was a multi-ribozyme RNA. It evolved, likely within liposomes (the protocells) forming in dry-wet cycling environments, through the random fusion of ribozymes by a ligase and was amplified by a polymerase. The protogenome thereby linked, in one molecule, the information required to seed the protometabolism (a combination of RNA-based autocatalytic sets) in newly forming protocells. If this combination of autocatalytic sets was evolutionarily advantageous, the protogenome would have amplified in a population of multiplying protocells. It likely was a quasispecies with redundant information, e.g., multiple copies of one ribozyme. As such, new functionalities could evolve, including a genetic code. Once one or more components of the protometabolism were templated by the protogenome (e.g., when a ribozyme was replaced by a protein enzyme), and/or addiction modules evolved, the protometabolism became dependent on the protogenome. Along with increasing fidelity of the RNA polymerase, the protogenome could grow, e.g., by incorporating additional ribozyme domains. Finally, the protogenome could have evolved into a DNA genome with increased stability and storage capacity. I will provide suggestions for experiments to test some aspects of this hypothesis.

Nitrogen (N) is an essential nutrient and plays an important role in plant growth and physiology. In addition, N is also the limiting nutrient in most terrestrial ecosystems. The increasing use of N fertilizers increases agricultural production, but also has negative impacts on biodiversity, water quality and increases emissions of greenhouse gases such as nitrogen oxides (NOx) and nitrous oxide (N2O) into the atmosphere. N2O is a strong greenhouse gas and the product of microbial transformation processes of N introduced into soil and groundwater (nitrification and denitrification). The production of N2O in soils is highly dependent on oxygen and water content, soil temperature and texture and the available amount of reactive nitrogen (NO3- or NH4+). In agricultural soils, N2O emissions are also influenced by the type of fertilizer used, crops grown, soil pH and NO3- concentration. Refined forms of land management, such as the cultivation of legumes, can reduce the use of fertilizers and thus also the emission of N2O. Legumes can use symbiotic nodule bacteria (rhizobia) to bind atmospheric N2 and make it available to the plant. Non-symbiotic soil microorganisms such as cyanobacteria or other heterotrophic and autotrophic prokaryotes are also able to fix N2. Furthermore, the N2-fixing enzyme nitrogenase, which is specific for most organisms, is not specific for other N2 compounds, especially N2O. To study the N2 and N2O fixation potential of soils and legumes, experiments with isotope-enriched N-gases (100 mol% 15N2 and 15N2O) were performed. Three different soil types (forest, meadow and wetland) as well as legume plants inoculated with rhizobia bacteria (Rhizobium leucaneae) (Leucaena leucocephala) were incubated in microcosms with different mixing ratios of N2 and N2O over a period of one week. The measured 15N enrichment was then used to determine the biological uptake rates. Both in plants and in soils admixtures of up to 40% N2O had no influence on the N2 fixation rate. N2 uptake rates were 1.2 ± 0.4 ug N gdw-1 d- 1in forest and grassland soils and 3.9 ± 1.2 ug N gdw-1 d- 1 in wetland soils. In contrast, the N2 fixation rates of leguminous plants were significantly higher (130 ± 40 ug N gdw-1 d- 1), with the highest accumulation not in root nodules but in the roots. In both plants and soil, the N2O fixation of 0.2 ± 0.1 ug N gdw-1 d- 1 could only be measured from a concentration of 4 vol%. The results indicate that both soils and legumes have a high potential to bind atmospheric nitrogen in the form of both N2 but not N2O. The fate of nitrogen in soil needs to be further investigated. N2 fixation seems to play an important role in wetland soils. Legumes in particular have the potential for NH4+ input and N2O reduction, as most of the solid nitrogen has been transferred to the roots, which can contribute significantly to soil nutrient input.

Current stock market forecasting methods encompass fundamental, technical, emotional, and bargaining factors. Predominantly, price prediction hinges on order volume and price, although correlating these two within existing models proves challenging. This study employs Cycle Generative Adversarial Network (Cycle GAN) to unravel the intricate price-volume relationship, combining it with Bollinger Bands for trading signal analysis, overcoming hurdles in short-term forecasting prevalent in numerical analysis and AI. Focusing on TSMC (2330.TW) stock price, the research leverages Cycle GAN in deep learning to master the price-volume nexus, juxtaposed with LSTM and RNN. Historical TSMC closing prices and transaction counts are model inputs, scrutinizing their interconnectedness for predictions. This innovative approach aligns stock price, volume, market value, taxes, and prior changes via system engineering. By intertwining Bollinger Bands with stock price forecasts, trading signals are distilled, factoring in extended index %b for a comprehensive market picture.

In response to new developments of work and employment in high-income countries (HICs), psychosocial aspects of work and health received increased attention. In contrast, middle-income countries (MICs) are mainly concerned with severe challenges of noxious and dangerous material work environments, poor employment conditions, and deficient social policies, leaving psychosocial aspects in a marginal role at best. More recently, differences between these two worlds were even aggravated by the COVID-19 pandemic. Yet, with economic globalisation and growing worldwide interconnectivity, the world of work in MICs is being rapidly transformed, sharing several concerns with modern Western societies. In this process, psychosocial occupational health will become an increasingly pressing issue. This contribution explores to what extent psychosocial aspects of work and health are already addressed in research originating from MICs. A selective focus on recent findings from two regions, Asia Pacific and Latin America, reveals a high degree of awareness of, and inquiry into, work-stress related problems within these countries. Importantly, in addition to incorporating research progress from HICs, these analyses identify new aspects within specific cultural and socio-economic environments, thus enriching the international state of art.

Bootstrapping is a flexible, powerful and well-established statistical approach to quantify the uncertainty of virtually any point estimate. While multiple versions of bootstrap confidence intervals are already available in Stata, dbs implements the double (iterated) bootstrap. Instead of relying on parametric assumptions such as the non-parametric resampling bootstrap confidence interval does, it is more flexible and derives critical values directly from that data. To do so, multiple methods are available (analytic approach, double resampling, jackknife estimation). In a comparative simulation study it is empirically demonstrated that the strengths of the double bootstrap are particularly evident for small samples (n < 100) when heteroscedasticity is present. While all other approaches result in undercoverage, only the double bootstrap reaches the target coverage level and hence avoids incorrect statistical conclusions. The computational burden is not even necessarily larger than for other bootstrap approaches.

Effective sports training should be attuned to the athlete's specific conditionings and characteristics. In motor learning research, two often neglected factors that influence this resonance are the learner's athletic background and the structural diversity of exercises (e.g., relative similarity). This study examines the effects of three learning approaches (i.e., contextual interference (CI), differential learning (DL), and free-play control condition (CO)) on the parallel learning of Handball (HB), Volleyball (VB), and Basketball (BB) skills, considering participants' prior sport backgrounds. Forty-five males (15 HB, 15 VB, and 15 BB players) with a mean age of 22±1.4 years and at least 6 years of experience in the mastered discipline voluntarily participated in this study. A pre-post-retention test design including a 6-week-intervention program was employed. In terms of short-term (pre-post) gain, only the DL- group significantly improved their performance in both non-mastered disciplines (p=0.03 for the BB free-throw and p=0.05 for the HB shooting tests), with a trend (ES=0.53) towards an improvement in the performance of the mastered VB underarm-pass skill. In terms of relatively permanent gains, the CI group significantly improved their performances from pre- to retention-test only in the non-mastered BB free-throw skill (p=0.018). In contrast, the DL group significantly improved their performance at retention compared to the pre-test in both non-mastered BB (p=0.004) and HB (p=0.003) skills, with a trend (ES=0.4) towards improvement in the mastered VB test. In both short, and relatively permanent terms, higher composite score gains were observed in DL compared to CI (p=0.001 and 0.002) and CO (p=0.001 and <0.0001). In conclusion, the present findings provide additional support for the potential advantages of the DL model over those of CI. These findings can serve as the basis for tailored training and intervention strategies and provide a new perspective for addressing various issues related to individual and situational learning.

The German Constitutional Court’s climate verdict provides a re-interpretation of liberal- democratic core concepts and is highly relevant for liberal constitutional law in general – including EU and international law. The verdict accepts human rights as intertemporal and globally applicable; it applies the precautionary principle to these rights and frees them from the misleading causality debate. However, the court fails to address the most important violations of human rights, and it categorised climate policy as a greater threat to freedom than climate change. And the court does not make it clear that the Paris 1.5-degree limit implies a radically smaller carbon budget. Furthermore, little attention has so far been paid to the fact that the ruling implies an obligation for more EU climate protection, especially since most emissions are regulated supranationally. To be effective, the EU emissions trading system demands a reform, which should go well beyond the existing EU proposals to enable societal transformation to sustainability.

The basic pattern of MHC variation in fish, with MHC class I versus class II, and polymorphic classical versus nonpolymorphic nonclassical, is similar in fish and mammals. Nevertheless, in many or all teleost fishes, important differences with mammalian or human MHC were observed: (1) The allelic/haplotype diversification levels of classical MHC class I genes tend to be much higher than in mammals; (2) Teleost fish classical MHC class I and class II loci are not linked. The present article summarizes previous studies that performed quantitative trait loci (QTL) analysis for mapping differences in teleost fish disease resistance, and discusses them from MHC point of view. Overall, those studies suggest the possible importance of genomic regions including classical MHC class II and nonclassical MHC class I genes, whereas similar observations were not made for the genomic regions with the highly diversified classical MHC class I alleles. The present study is a review and discussion of the fish MHC situation.

COVID-19-associated coagulopathy (CAC) and ICU admissions were recognized as critical health issues that contributed to the morbidity and mortality in SARS-CoV-2-infected patients. Here, we analyzed publicly available data from the Yale IMPACT cohort to address immunological misfiring and sex differences in early COVID-19 ICU patients by taking various biological variables into account that were not considered. In 2020, SARS-CoV-2 was considered far more pathogenic and lethal than other circulating respiratory viruses, and it is thus surprising that published studies failed to confirm whether all patients were indeed SARS-CoV-2+ at least by one method, thereby confounding many findings/conclusions. Several key findings were further missed or misinterpreted due to lack of consideration of several important biological variables such as days from symptoms onset (DFSO), risk factors, including obesity, and treatments that influence the immunological measures evaluated. The immune profile in the early phase of infection will differ vastly from mid-to-late phases of infection, which likely coincides with recovery or is the tipping point for progression to severe illness, and thus grouping patients from different phases/DFSO into one single group is not the right approach. Taken together, our analysis shows that interferon responses were dampened and none of the early treatments were effective in reducing levels of IL6, and that obese patients exhibited highest mortality and worst clinical scores. The opportunity to understand the contribution of biological sex, risk factors, and early treatments with respect to COVID-19-related ICU admission and progression to morbidity and mortality was missed.

Recent advances in microscopy imaging and image analysis motivate more and more institutes world-wide to establish dedicated core-facilities for bio-image analysis. To maximize the benefits research groups at these institutes gain from their core-facilities, they should be established to fit well into their respective environment. In this article, we introduce common collaborator requests and corresponding potential services core-facilities can offer. We also discuss potential conflicts of interests between the targeted missions and implementations of services to guide decision makers and core-facility founders to circumvent common pitfalls.

This study examined carbon footprint as an indicator of soil health at spatiotemporal scales with different land use types and varying soil depths in Morogoro, representing the eastern agroecological zone of Tanzania. Soils are highly weathered and acidic. The specific objectives were twofold: (1) To quantify soil organic carbon (SOC) at varying soil depths (0–15 cm, 15–30 cm) in contrasting land use types, including tractor cultivated, hand-hoe cultivated, ranch land, and reserved/bare land type; (2) To predict carbon management indices (CMI) of the studied land use types through regresses SOC, carbon pool index (CPI), and lability index (LI) at varying soil depths. Composite soil samples were based on transects of three main plots each (replicates) of 20 m by 50 m. Results showed that land use types and soil depths significantly (P <0.001) affected SOC (3.4%) and CMI (126.3). Hand hoe cultivated land at 0–15 cm recorded CMI of 259.8. Regression analysis showed an increase in CMI ranging from 97% to 99%, with standard error ranging from 2.177 to 46.096. Similar trends, but with disparity magnitudes in regressed parameters provide useful insight into transformations of organic carbon in contrasting land use types.

Here we report the preparation and characterization of a novel biomimetic toothpaste containing morphogenetically active amorphous polyphosphate (polyP) microparticles enriched with retinyl acetate (“a-polyP/RA-MP”). The spherical microparticles (average size, 550±120 nm), prepared by co-precipitating sodium-polyP with calcium chloride and supplemented with retinyl acetate, were incorporated into a basis toothpaste at a final concentration of 1% or 10%. The paste containing “a-polyP/RA-MP” significantly increased the growth of human mesenchymal stem cells (MSC), compared to a commercial toothpaste which acts rather inhibitory and the paste without polyP and retinyl acetate. qRT-PCR experiments revealed that the retinoid causes an induction of the expression of the MSC marker genes for osteoblast differentiation encoding collagen type I and alkaline phosphatase. On the other hand, the polyP ingredient, supplied as Zn-polyP microparticles (“Zn-a-polyP-MP”) strongly inhibited the growth of the cariogenic bacterium Streptococcus mutans. We demonstrate that the amorphous polyP-containing toothpaste, enriched with retinyl acetate, efficiently repairs both cracks/fissures and carious lesions in the tooth enamel, and reseals dentinal tubules, already after a 5 d treatment (brushing) of teeth twice daily for 5 min as examined by SEM and quantitative EDX analysis. The stability of the occlusion of dentin cracks even turned out to resist against short high power sonication treatment. Our results demonstrate that the novel toothpaste prepared here, containing amorphous polyP and retinyl acetate, is particularly suitable for prevention/repair of (cariogenic) damages of tooth enamel/dentin and for treatment of dental hypersensitivity.

Diabetes mellitus is the global epidemic of the 21st century affecting millions worldwide. Usually, patients with long-standing type one diabetes (T1D) or type two diabetes (T2D) tend to develop complications. A common complication is the degenerative of the nerves in the peripheral nervous system (PNS). This complication is known as distal symmetric polyneuropathy or just diabetic neuropathy. A variety of symptoms can be experienced with this complication, including pain and numbness. One characterization of this complication is the sensory loss that begins in the lower extremities and spreads substantially to the fingers and hand. There is no clear mechanism for how this happens in diabetic patients. Studies have shown that nerve damage from this complication can be due to oxidative stress, sorbitol accumulation, and advanced glycation end products (AGEs). Some of the most common medications being provided for diabetic neuropathic pain (DNP) include amitriptyline and desipramine. Other medications also include gabapentin and duloxetine. There are noninvasive options, such as acupuncture, that could provide beneficial data if rigorous studies are conducted. A number of new studies are being completed to identify more effective treatments for this condition.

This article addresses a challenge modeling novices face in model conceptualization: the recognition of behavior modes. Despite behavior modes being at the heart of system dynamics modeling, there is no unifying taxonomy for them, making them harder to learn for beginners. The article proposes criteria a taxonomy should satisfy, critically reviews previous taxonomies in the literature, and then introduces a new consistent taxonomy based on slope and curvature with mode names that refer only to visual cues and free of references to prior mathematical or domain-specific knowledge. Evidence from an exploratory experiment suggests that novices actually have difficulties classifying curves when using previous taxonomies. Links from these elementary modes to analogous terms in other taxonomies in diverse disciplines allow this taxonomy to be related to other ones. The article concludes by mentioning relevant limitations and future steps.

The purpose of this paper is to describe a new way of producing renewable energy based on fjords as a water heater. We will call this system the Water-thermal Energy Production System (WEPS), because the basic idea is to extract heating and cooling energy from water. Although a prototype of WEPS has existed in Norway for more than ten years, a WEPS currently in operation has not been financially analyzed in the literature. Coastal parts of Norway have a potential of 5 TWh of profitable WEPS-facilities [9], due to convenient access to fjords containing water with stable all-season temperatures of about 4–12C when the depth of the water is about 50 meters. This stability of the water temperature makes it possible to extract energy from the fjord in a very efficient way. The potential for economically-profitable WEPS in other parts of the world has not been estimated. In order to answer such a question, more research is required. We have conducted a case study of a WEPS located in the Norwegian municipality of Eid. This is the first full-scale Norwegian WEPS, and it has been operating since 2006. The nascent years have passed, and the technology has been in operation for some years. In this paper, we have made an estimate of the business profitability and the external effects based on past empirical evidence and some assumptions about future development in some key figures. The results suggests that WEPS-Eid has been a profitable investment carrying a positive internal rate of revenue, even if the present underutilization in production capacity will continue in the future. Stability in energy prices for heating purposes has also gained customers compared to the more volatile prices of alternative renewable energy, like hydropower or wind turbines. The negative, external effects in the operating phase from WEPS-Eid are insignificant. Despite the significant profitability of the WEPS facility in Eid, there are two main obstacles for new entrants. There is a lack of relevant operational information for potential investors due to few facilities. This leads to uncertainty, and investments in WEPS appear as a risky business. Secondly, construction of a WEPS requires both big financial investments in digging and facilitating long trenches for a pipeline system and time and effort spent on acquiring the licenses needed for doing this work. A coordinating unit is probably required in order to get the necessary public and private licenses and to reduce fixed costs by coordinating other tasks in the same trenches, like pipes for water and sewer, fiber cables and tele-cables. In Eid, the local municipal administration was the coordinating unit.

Pathological calcifications may consist of calcium oxalate (CaOx), hydroxyapatite phosphate (HAP), and brushite (BRU). The objective of this study was to evaluate the effect of phytate (inositol hexakisphosphate, InsP6), InsP6 hydrolysates, and individual lower InsPs (InsP5, InsP4, InsP3, and InsP2) on the crystallization of CaOx, HAP and BRU in artificial urine. All of the lower InsPs seem to inhibit the crystallization of calcium salts in biological fluids, although our in vitro results showed that InsP6 and InsP5 were stronger inhibitors of CaOx crystallization, and InsP5 and InsP4 were stronger inhibitors of BRU crystallization. For the specific in vitro experimental conditions we examined, the InsPs had very weak effects on HAP crystallization, although it is likely that a different mechanism is responsible for HAP crystallization in vivo. For example, calciprotein particles seem to have an important role in the formation of cardiovascular calcifications in vivo. The experimental conditions that we examined partially recapitulated the in vivo conditions of CaOx and BRU crystallization, but not the in vivo conditions of apatite crystallization.

Following Smolin, we proceed to unification of general relativity and quantum theory by operating solely with events, i.e., without appealing to physical systems and space-time. The universe is modelled as a dendrogram (finite tree) expressing the hierarchic relations between events. This is the observational (epistemic) model; the ontic model is based on p-adic numbers (infinite trees). Hence, we use novel mathematics—not only space-time but even real numbers are not in use. Here, the p-adic space (which is zero dimensional) serves as the base for the holographic image of the universe. In this way our theory relates to p-adic physics; in particular, p-adic string theory and complex disordered systems (p-adic representation of Parisi matrix for spin glasses). Our Dendrogramic-Holographic (DH) theory matches perfectly with the Mach’s principle and Brans-Dicke theory. We found surprising informational interrelation between the fundamental constants, h, c, G, and their DH-analogues, h(D), c(D), G(D). DH-theory is part of Wheeler’s project on the information restructuring of physics. It is also a step towards the Unified Field theory. The universal potential V is nonlocal, but this is relational DH-nonlocality. V can be coupled to the Bohm quantum potential by moving to the real representation. This coupling enhanced the role of the Bohm potential.

Viral infections as well as changes in the composition of the intestinal microbiota and virome have been linked to cancer. Moreover, the success of cancer immunotherapy with checkpoint inhibitors has been correlated with the intestinal microbial composition of patients. The transfer of feces – which contains mainly bacteria and their viruses (phages) – from immunotherapy responders to non-responders, known as fecal microbiota transplantation (FMT), has been shown to be able convert some non-responders to responders. Since phages may also increase the response to immunotherapy, for example by inducing T cells cross-reacting with cancer antigens, modulating phage populations may provide a new avenue to improve immunotherapy responsiveness. In this review, we summarize the current knowledge on the human virome and its links to cancer, and discuss the potential utility of bacteriophages in increasing the responder rate for cancer immunotherapy.

Recently we started the development of Holographic Dendrogramic Theory (DH-theory). It is based on the novel mathematical representation of the relational event universe (in the spirit of (Smolin, Barbour, Rovelli). Elementary events are represented by branches of dendrograms, finite trees, which are generated from data with clustering algorithms. In this note we study the dynamics of the event-universe generated by the appearance of a new event. Generally, each new event can generate the complete reconstruction of the whole dendrogramic universe. However, we found (via numerical simulation) unexpected stability of this universe. Its events are coupled via the hierarchic relational structure which is relatively stable with respect even random generation of new events. We also observe the regularity patterns in location of new events on dendrograms. In the curse of evolution, the dendrogram’s complexity increases and determine the arrow of time the event universe. We use the complexity measure from particle shape dynamics which was shown to be increase in both direction away from a Janus point and thus determine the arrow of time in symmetrical manner away from a Janus point. The particle shape dynamics theory is a relational theory with close ideological resemblance to DH-theory as both relays on Mach’s principle and Leibniz’s relationalism and his principles. By using the complexity measure on dendrograms and its p-adic string representation, we demonstrate the emergence of time arrow from the p-adic zero-dimensional field, where space and time are absent.

Rapid peri-urbanization has resulted in increasing demand for and pressure on peri-urban lands at the expense of agricultural lands. Households’ decision to convert from agricultural land uses to residential and commercial land uses is driven by a myriad of factors, ranging from social to economic, in the Asante-Akim South district of the Asante region, Ghana. The paper examined the effects of agricultural land use trade-off on food production in the district. Using a triangulation of qualitative and quantitative methods, 115 household respondents were proportionately sampled from three selected communities in the district, for the collection of data through the administration of questionnaires. The data were subjected to the Pearson’s chi-square, embedded in the SPSS V.16, to test for association among the variables. We report that the increasing rate of agricultural land uses conversions was as a result of increasing demand for residential and commercial land usage at the expense of agricultural land uses. Converting prime agricultural lands into other land uses was seen as profitable to agricultural expansion. A re-examination of the district land use plans by the Ghanaian Physical (Town and Country) Planning Department in tandem with the Lands Commission is therefore recommended.

Amorphous solid dispersions are considered a promising formulation strategy for the oral delivery of poorly soluble drugs. The limiting factor for the applicability of this approach is the physical (in)stability of the amorphous phase in solid samples. Minimizing the risk of reduced shelf life for a new drug by establishing a suitable excipient/polymer-type from first principles would be desirable to accelerate formulation development. Here we perform Molecular Dynamics simulations to determine properties of blends of eight different polymer-small molecule drug combinations for which stability data is available from a consistent set of literature data. We calculate thermodynamic factors (mixing energies) as well as mobilities (diffusion rates and roto-vibrational fluctuations). We find that either of the two factors, mobility and energetics, can determine the relative stability of the amorphous form for a given drug. Which factor is rate limiting depends on physico-chemical properties of the drug and the excipients/polymers. The methods outlined here can be readily employed for an in-silico pre-screening of different excipients for a given drug to establish a qualitative ranking of the expected relative stabilities, thereby accelerating and streamlining formulation development.

Over recent years globalisation has occasioned a dramatic rise in cross-cultural interactions – until this was disrupted by the COVID-19 pandemic (OECD 2018, Nelson &amp; Luetz 2021). The ability to competently engage in a multicultural world is often considered the “literacy of the future” (UNESCO 2013, OECD 2018). Global interconnectedness has brought studies into intercultural competence to centre stage (UNDP 2004, Bissessar 2018, Nelson et al. 2019). This has increased the demand for cross-cultural education experiences that facilitate such learning. However, there is a dearth of empirical research into the issues and effects surrounding short-term cross-cultural educational experiences for adolescents. This mixed methods study extends previous research by looking specifically into what impact short-term cross-cultural experiences may have on the formation of intercultural competence and emotional intelligence of Australian high school students. This study used two instruments for measuring intercultural competence and emotional intelligence in a pre- and posttest quasi-experimental design (n=14), the GENE Scale and TEQ. Moreover, it conducted in-depth post experience qualitative interviews (n=7) that broadly followed a phenomenological paradigm of inquiry. The findings suggest that fully embodied cross-cultural immersive experiences offer benefits in areas of intercultural competence and emotional intelligence and can offer meaningful application in areas of current affairs. A greater understanding of the linkages between immersive cross-cultural experiences and intercultural competence offers prospects for policy makers, educators, pastoral carers, and other relevant stakeholders who might employ such experiential learning to foster more interculturally and interracially harmonious human relations.

: Schizophrenia and schizoaffective disorder are generally treated with second-generation antipsychotic drugs. These drugs are mostly D2 and 5-HT2A antagonists. They improve positive schizophrenia symptoms sufficiently well; however, they ameliorate negative schizophrenia symptoms and cognitive functions to a small extent. We review novel antipsychotic drugs exerting a partial agonism at dopaminergic and serotonergic receptors such as cariprazine, brexipiprazole and lumateperone. Besides, the mechanisms of actions of non-anti-dopaminergic antipsychotic drugs are pointed out. Updated neural networks are used to explain the mechanism of action of M4 and M1 receptor agonists, for example xanomeline combined with trospium or emraclidine, and trace-amine-associated receptor 1 agonists (TAAR1), for example ulataront. Phase 3 clinical trials of new third generation antipsychotic drugs are presented. Novel antipsychotic drugs with a partial agonism at D2 and D3 receptors improve positive and negative schizophrenia symptoms as well as cognitive symptoms better than second generation antipsychotic drugs. Besides, they are well tolerated. M4 and M1 receptor agonists, i.e. xanomeline combined with trospium or emraclidine, and TAAR1 agonists, i.e. ulataront, have promising results in clinical trials; they well improve negative schizophrenia symptoms and cognitive functions. Phase 3 clinical trials offer promising results for anti-dopaminergic and non-anti-dopaminergic novel antipsychotic drugs. These new non-anti-dopaminergic antipsychotic drugs better emend negative schizophrenia symptoms, and they better improve cognitive functions than second-generation antipsychotic drugs. Promising new antipsychotic drugs are cariprazine, brexipiprazole, lumateperone, ulataront, and xanomeline combined with trospium. Although phase 3 clinical studies are not yet completed, they showed a therapeutic effect superior to those achieved by second-generation antipsychotic drugs. They are tolerated very well, and they better treat negative schizophrenia symptoms and improve cognitive functions.

Spectrally weighed irradiance on the corneal plane is often used to determine the visual and non-visual potency of light. Spectral irradiance or illuminance is measured with a diffuser in the so-called 2π geometry (i.e., a hemispheric measurement). Due to anatomical conditions, the human binocular field of view (FOV) does not correspond to a hemisphere but is occluded upwards and downwards. FOV-restricted measurements are scarce, however, and thus the error when using hemispheric measurements is yet to be determined. For our study, we designed and 3D printed FOV occlusions as attachments to spectral measurement devices. Measurements with and without the occlusion were taken in different lighting situations in the laboratory (light from different directions) and in real-world conditions (light typically from above). Our measurements show a reduction of visual and melanopic values due to the FOV occlusion ranging from negligible to over 60% for realistic scenarios. Further, the reduction was comparable for visual and melanopic parameters, as the distribution of light in the FOV was generally spectrally homogeneous. In the case of an exemplary and artificial laboratory situation, however, the melanopic daylight (D65) efficacy ratio changed by more than a factor of 2 only due to the FOV occlusion. Finally, head orientation showed a marked impact on all quantities. Our results reveal the potential for considerable error when just evaluating and comparing vertical, hemispheric measurements in experiments and non-visual lighting design projects. We thus encourage the (additional) use of a FOV occlusion for eye-level measurements in typical viewing directions and provide open-source 3D-print files.

The last 50 years witnessed the emergence of various so called “hyperpolarization technologies” that allow generating large magnetizations of spin ensembles. This Editorial Essay provides a brief overview of the use of these technologies in various fields, including medicine, chemistry, and quantum sensing. It is concluded that critical questions still need to be addressed to harness benefits of nuclear hyperpolarization in clinical medical imaging while interdisciplinary innovation can unlock potential of novel (yet unexplored) methods. My hope is that this Editorial Essay provides valuable insights into the current state and future directions of spin technologies.

One hundred and twenty (120) fingerlings of Clarias gariepinus (mean weight: 0.96 ± 0.1g) were randomly exposed to 4 experimental treatments of petroleum, based on LC₅₀ values (6.4mg/L of crude oil, 8.7mg/L of petrol, 8.0mg/L of kerosene and 7.8mg/L of diesel oil) and replicated thrice, to determine polycyclic aromatic hydrocarbons (PAH) in exposed fish for 96 h. There was no significant difference (P > 0.05) in total (PAHs) between crude oil (97.1 ng/uL) and diesel (97.2 ng/uL) exposed fish and also between petrol (53.2 ng/uL) and kerosene (49.6 ng/uL) exposed fish, but there was a significant difference (P < 0.05) in PAH levels of the crude oil/diesel exposed -groups of fish compared to petrol/kerosene exposed -groups of fish (97.1/97.2 and 53.2/49.6 ng/uL). Naphthalene correlated positively to benzo a anthracene (r=0.672, (P < 0.05), benzo b fluoranthene (r=0.681, P < 0.05) and chrysene (r=0.615, P < 0.05) but did not correlate to fluorene. Benzo a anthracene correlated positively to benzo a pyrene (r=0.578, P < 0.05), phenathrene (r=0.685, P < 0.05) but did not correlate to acenaphthene. Fluorene correlated positively to benzo a pyrene (r=0.695, P < 0.05) but did not correlate to chrysene. Chrysene correlated positively to dibenzo a,h, pyrene (r=0.658, P < 0.05) to phenathrene and benzo b fluoranthene (r=0.659, P< 0.05). Indeno 123 cd- pyrene and fluranthene however did not correlate to other PAHs except naphthanene, acenaphthene and acenaphthylene. The level of PAH in fish may translate to the toxicity effect since crude oil and diesel with lower LC₅₀ (6.4 and 7.8 mg/L) deposited greater PAH than kerosene and petrol with higher LC₅₀ (8.7 and 8.0 mg/L) in fingerlings of C. gariepinus. High risk to cancer disorders may occur in exposed fish to petroleum with high incidence of fluorene , anthracene, pyrene and benz a anthracene which correlated positively to benzo a pyrene which provide some basis for predicting impact of oil spills on fingerling population.

During the current COVID-19 pandemic caused by SARS-CoV-2, clinicians and scientists are working assiduously to unravel its pathophysiology and find effective treatments. An impressive number of papers has been published on SARS-CoV-2, exposing the complexity of the disease, the tendency of scientists to form hypotheses within their area of expertise, and the lack of orchestration of research. Hypotheses and research findings mainly complement each other, though sometimes controversies can be discerned among various theories and study results. Our overview aims to portray the ‘big picture’ of COVID-19, visualising the interwovenness of different pathophysiological pathways, with a focus on cytokine-induced pathology, the sequelae of ACE2 downregulation, and thrombosis associated with microvascular injury. It aids in overseeing the effects of repurposed drugs on intended targets, but also alerts to the (adverse) effects on interacting pathways. The overview shows how comorbidities probably increase susceptibility to (severe) COVID-19 and provides the possible pathophysiological origin of signs, symptoms, and biochemical abnormalities.

Background: The commonly known assumption that combinations of several herbs in one formulation can have better efficacy due to additive or synergistic effects has not been systematically studied despite some evidence supporting the synergy concept. Study aim: The study aimed to reveal the molecular interactions in situ of host cells in response to the intervention of BHP and justify the benefits of implementing BHP in clinical practice. Results: This overview provides the results of recent clinical and network pharmacology studies of botanical herbal preparations (BHP) of Rhodiola with other plants, including Ashwagandha, Green Tea, Eleutherococcus, Schisandra, Eleutherococcus, Leuzea, Caffeine, Cordyceps, Gingko, Black Cohosh, saffron, and L-carnosine. Conclusions: The most important finding from network pharmacology studies of BHP was the evidence supporting the synergistic interaction of BHP ingredients, revealing unexpected new pharmacological activities unique and specific to the new BHP. Some studies show the superior efficacy of BHP compared with mono-drugs. At the same time, some a priori-designed combinations can fail, presumably due to antagonistic interactions and crosstalk between molecular targets within molecular networks involved in the cellular and overall response of organisms on the intervention. Network pharmacology studies help predict the results of studies to discover new indications and unpredicted adverse events.

The legume-rhizobia symbiosis is one of the most important plant-microbe interactions in sustainable agriculture due to its ability to provide much needed N to cropping systems. This interaction is mediated by the mutual recognition of signaling molecules from the two partners, namely legumes and rhizobia. With legumes, these molecules are in the form of flavonoids and anthocyanins, which are responsible for the pigmentation of plants parts, such as seeds, flowers, fruits and even leaves. Seed coat pigmentation in legumes is a dominant factor influencing gene expression relating to N2 fixation, and may be responsible for the different N2-fixing abilities observed among legume genotypes under field conditions in African soils. Cowpea, Kersting’s bean and Bambara groundnut landraces with black seed coat color are reported to release higher concentrations of nod-gene-inducing flavonoids and anthocyanins when compared to the Red and Cream landraces, hence the black seed coat pigmentation is considered a biomarker for enhanced nodulation and N2 fixation. Cowpea, Bambara groundnut and Kersting’s bean with differing seed coat colors are known to attract different native soil rhizobia, confirmable by PCR-RFLP analysis of bacterial DNA from root nodules of these legumes. Even when seeds of the same legume with diverse seed coat colors were planted together in one hole, the nodulating bradyrhizobia clustered differently in the PCR-RFLP dendrograms. In one study, Kersting’s groundnut, Bambara groundnut and cowpea with differing seed coat colors were selectively nodulated by different bradyrhizobial species. Multilocus sequence analysis showed that different Bradyrhizobium species nodulated the Kersting's bean based on seed coat color. Phylogenetic analysis also placed the bradyrhizobial isolates in close proximity to different Bradyrhizobium species such as B. vignae 7-2T, B. subterraneum 58 2-1T, B. kavangense 14-3T, B. liaoningense 2281 (USDA 3622)T, B. yuanmingense LMG 21827T, B. huanghuaihaiense CCBAU 23303T, B. pachyrhizi PAC48T, and a reference type strain of B. elkanii according to seed coat color. Using 16S rDNA amplicon sequencing, we also found significant selective influences of seed coat pigmentation on microbial community structure in the rhizosphere of five Kersting’s groundnut landraces. For example, the rhizosphere of Belane Mottled landrace was dominated by Proteobacteria, while Bacteroidetes dominated the rhizospheres of the other landraces. With legumes, seed coat pigmentation therefore plays a dominant role in the selection of the bacterial symbiotic partner.

The core pathological event in Parkinson’s disease (PD) is the specific dying of dopamine (DA) neurons of the substantia nigra pars compacta (SNc). Why SNc DA neurons are especially vulnerable and why idiopathic PD has only been found in humans is still puzzling. The two main underlying factors of SNc DA neuron vulnerability appear related to high DA production, namely (i) the toxic effects of cytoplasmic DA metabolism and (ii) continuous cytosolic Ca2+ oscillations in the absence of the Ca2+-buffer protein calbindin. Both factors cause oxidative stress by producing highly reactive quinones and increasing intra-mitochondrial Ca2+ concentrations, respectively. High DA expression in human SNc DA neuron cell bodies is suggested by the abundant presence of the DA-derived pigment neuromelanin, which is not found in such abundance in other species and has been associated with toxicity at higher levels. The oxidative stress created by their DA production system, despite that the SN does not use unusually high amounts of energy, explains why SNc DA neurons are sensitive to various genetic and environmental factors that create mitochondrial damage and thereby promote PD. Aging increases multiple of the risk factors for PD, and, to a large extent, PD is accelerated aging. To prevent PD neurodegeneration, possible approaches that are discussed here are (1) reducing cytoplasmic DA accumulation, (2) blocking cytoplasmic Ca2+ oscillations, and (3) providing bioenergetic support.

Objective: To examine variations in end-of-life care for breast cancer, heart failure, and dementia patients. Data and methods: Data from four Norwegian health registries were linked using a personal identification number. Longitudinal trends over 365 days and the type of care on the final day of life were analyzed using descriptive techniques and logistic regression analysis. Results: Patients with dementia were most commonly placed in nursing homes, while patients with heart failure and breast cancer were more frequently hospitalized. Breast cancer and heart failure patients had a higher likelihood of dying at home. The presence of general practitioners increased the probability of home-based end-of-life care for cancer patients, while non-physician healthcare workers increased the likelihood of home-based care for the other patient groups. Conclusion: Diagnoses, individual characteristics, and service availability are all associated with the place of death in end-of-life care.

We review some recent developments about strongly interacting relativistic Fermi theories in three spacetime dimensions. These models realize the asymptotic safety scenario and are used to describe the low-energy properties of Dirac materials in condensed matter physics. We begin with a general discussion of the symmetries of multi-flavor Fermi systems in arbitrary dimensions. Then we review known results about the critical flavor number $N_\mathrm{crit}$ of Thirring models in three dimensions. Only models with flavor number below $N_\mathrm{crit}$ show a phase transition from a symmetry-broken strong-coupling phase to a symmetric weak-coupling phase. Recent simulations with chiral fermions show that $N_\mathrm{crit}$ is smaller than previously extracted with various non-perturbative methods. Our simulations with chiral SLAC fermions reveal that for four-component flavors $N_\mathrm{crit}=0.80(4)$. This means that all reducible Thirring models with $\Nr=1,2,3,\dots$ show no phase transition with order parameter. Instead we discover footprints of phase transitions without order parameter. These new transitions are probably smooth and could be used to relate the lattice Thirring models to Thirring models in the continuum. For a single irreducible flavor, we provide previously unpublished values for the critical couplings and critical exponents.

Harbor porpoise are typically seen in small groups of 1-3 individuals, with aggregations of 20+ individuals treated as rare events. Since the 1990s, the harbor porpoise population in the Salish Sea has seen a significant recovery, which has led to an increased number of observed aggregations that exceed the more usual small group sizes. By combining the observational data of United States and Canadian research organizations, community scientists, and whale watch captains or naturalists, we demonstrate that harbor porpoise aggregations appear to be more common than previously known, with 160 aggregations documented in 2022 alone. Behavioral data also indicated that foraging behaviors were common and social behaviors, like mating, were seen more often during these encounters compared to small groups. Other behaviors that are considered to be rare or unknown, were also observed during these encounters, including cooperative foraging and vessel approach. These aggregations are likely important foraging and social gatherings for harbor porpoises. This holistic approach integrating data from two countries and multiple sources provides an ecosystem level assessment that more effectively reflects the habitat use of harbor porpoise in this region that do not recognize the socio-political boundaries imposed upon the natural world.

Reduced nutrient mineralization rates under minimum tillage are usually compensated by mineral fertilizer application. These cannot be applied in organic farming systems, however. We hypothesized that organic minimum tillage based on frequent cover cropping and application of dead mulch will improve soil fertility and can compensate for the potential negative effects of minimum tillage. Two long-term field experiments were set up in 2010 and 2011 comparing plough versus minimum tillage including application of transferred mulch. As second factor, the application of compost versus mineral potassium and phosphorus was compared. In 2019, soils were analyzed for soil pH, organic carbon, macro-, micronutrients, microbial biomass, microbial activity and total nematode abundance. In addition, performance of pea in the same soils was determined under greenhouse conditions. Across both experiments, macronutrients (+52%), micronutrients (+11%), microbial biomass (+51%), microbial activity (+86%), and bacterivorous nematodes (+112%) increased in minimum tillage compared with the plough-based system. In the greenhouse, pea biomass was 45% higher in the soil that had been subjected to minimum tillage compared to the plough. In conclusion, soil fertility can be improved in organic minimum tillage systems by intensive cover cropping and application of dead mulch to levels higher than in a plough-based system.

In the whole world, including Mexico, the rising prevalence of diabetes poses significant challenges to healthcare systems, with a notable impact on hospital admissions even being an ambulatory care sensitive condition, that means, hospital admissions are avoidable. Traditional healthcare methodologies have been instrumental in managing diabetes and preventing complications, yet they often face limitations such as merging, cleansing, and outlier analysis of health data to identify and address diseases effectively. This paper aims to address this gap by conducting a comprehensive comparison of the methodologies used in healthcare and data science for this purpose. This work uses hospital diabetes discharge records from 2010 to 2023, a total of 36,665,793 records, which belong to medical units of the Ministry of Health of Mexico. In this work, we seek to provide the arguments why as a data scientist it is mandatory to learn the field of knowledge of the problem and its implications if this is not done, and therefore to disclose insights that can help in policy decisions and reduce the burden of avoidable hospitalizations. The approach is mainly based on the standardization or adjust rates by sex and age groups. This study provides the foundations for a new way of data scientist must deal with health data.

Standards are not only crucial for obtaining a certification for practical use, but also an essential guidance for inferring how and what to simulate as well test experimentally. This paper examines the potential applicability of existing standards from various domains, including aerospace and automotive, to Wing-Structure- Integrated high-pressure Hydrogen Tanks (SWITHs). It highlights the associated challenges and uncertainties, acknowledging the absence of a single, all-encompassing standard for SWITHs. We embark on an exploration aimed at identifying alternative standards that are best suited for SWITHs. The analysis scrutinizes existing standards that could potentially facilitate SWITH certification, with a particular focus on the inclusivity of externally loaded hydrogen tanks. Assessment criteria are established to filter standards that best meet the needs of SWITHs. Through this process, we identify two key standards that present themselves as the most promising alternatives. Moreover, we delineate the technical constraints involved in selecting the maximum nominal working pressure for high-pressure tanks intended for burst tests. Our findings reveal a current upper limit of 525 bar, imposed by the limitations of existing test facilities. The study underscores that these standards should serve as flexible guiding frameworks rather than rigid protocols, encouraging progressive development in the SWITH field.

Neuromuscular disorders cause progressive muscular weakness, which limits upper extremity mobility and performance during activities of daily life. A dynamic arm support can improve mobility and quality of life. However, their use is often discontinued over time for unclear reasons. This study aimed to evaluate whether users of dynamic arm supports demonstrate and perceive quantifiable mobility benefits over a period of two months. Nine users of dynamic arm supports were included in this observational study. They had different neuromuscular disorders and collectively used four different arm supports. They were observed for three consecutive weeks during which they were equipped with a multi-sensor network of accelerometers to assess the actual use of the arm support and they were asked to provide self-reports on the perceived benefits of the devices. Benefits were experienced mainly during anti-gravity activities and the measured use did not change over time. The self-reports provided contextual information in domains such as participation to social life, in addition to the sensor system. However self-reports overestimated the actual use by up to three-fold compared to the accelerometer measures. A combination of objective and subjective methods is recommended for meaningful and quantifiable mobility benefits during activities of daily life.

The design of curved surface sliders (CSS) based on the elastic response spectrum is done by iteration to find the combination of friction coefficient and displacement capacity which satisfies the condition that the maximum horizontal CSS force is equal to the horizontal force of the structure. Although this CSS design is valid it does not necessarily minimize structural acceleration. This paper therefore describes the optimum CSS design for minimum structural acceleration. All valid CSS designs and the optimum CSS design are represented by their associated trajectory in the elastic response spectrum plane which visualizes the optimization problem. The results demonstrate that the optimum CSS design is not obtained at maximum tolerated effective damping ratio. The subsequent sensitivity analysis describes how much the structural acceleration increases if the actual friction coefficient of the real CSS deviates from its optimum design value. The analysis points out that the increase in structural acceleration is approximately one order of magnitude smaller than the deviation in friction. The sensitivity data may be used by structural engineer to determine tolerable deviations in friction coefficient which still results in acceptable structural accelerations.

Aneuploidy describes the gain or loss of entire chromosomes or chromosome arms. Already more than 100 years ago, aneuploidy was described to be featured in cancer and it is known today to be present in 68-90 % of cancers, depending on tumour entity. Aneuploidy is implicated to affect cancer growth, therapy response and frequently affects prognosis. Chromosomal instability (CIN) is recognized as the main cause of aneuploidy and is characterised as the fluent process of gaining or losing chromosomes. Chromosomally instable cells need to be kept in check, or cleared, to prohibit the sampling of aneuploid karyotypes able to drive tumorigenesis. Of note, even aneuploid cancer cells often show CIN, a feature that promotes therapy related drug-resistance. Here, we review how CIN can be prevented or limited to spread by the induction of cell death and the relevance of different p53 responses triggered in response to mitotic perturbations to prohibit the formation of cancer driving aneuploidies.

Laser powder bed fusion (LPBF) is an additive manufacturing process employed in many industries, for example for aerospace, automotive and medical applications. In these sectors, mainly nickel-, aluminum- and titanium-based alloys are used. In contrast, the mechanical engineering industry is interested in more wear-resistant steel alloys with higher hardness, both of which can be achieved with a higher carbon content, like in high-speed steels. Since these steels are susceptible to cracking, preheating needs to be applied during processing by LPBF. In a previous study, we applied a base plate preheating temperature of 500 °C for HS6-5-3-8 with 1.3 % carbon content. We were able to manufacture dense (p > 99.9 %) and crack-free parts from HS6-5-3-8 with a hardness > 62 HRC (as built) by LPBF. In this study, we investigate the influence of preheating temperatures up to 600 °C on hardness and microstructure dependent on part height for HS6-5-3-8. The microstructure was studied by light optical microscopy (LOM), scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD). The analysis of hardness and microstructure at different part heights is necessary because state-of-the-art preheating systems induce heat only into the base plate. Consequently, parts are subjected to temperature gradients and different heat treatment effects depending on part height during the LPBF process.

International migration is closely tied to demographic, socioeconomic, and environmental factors and their interaction with migration policies. Using a combination of a gravity econometric model and an overlapping generations model, we estimate the probability of bilateral migration among 160 countries in the period of 1960 to 2000 and use these findings to project international migration flows and their implication for income inequality within and between countries in the 21st century under five shared socioeconomic pathways (SSPs). Our results show that international migration not only increases the welfare in developing countries, but also closes the inequality gap within and between low-skilled and high-skilled labor in these countries. In most developed countries on the contrary, international migration increases the inequality gap and slightly reduces output. These changes are not uniform and vary significantly across countries depending on their population growth and human capital development trajectories. Overall, while migration is strongly affected by inequality between developed and developing countries, it has an ambiguous impact on inequality within and between countries.

Despite their enormous potential the use of Indoor Localization Systems (ILS) remains seldom. One reason is the lack of market transparency and stakeholders’ trust in the systems’ performance as a consequence of insufficient use of Test and Evaluation (T&E) methodologies. The heterogeneous nature of ILS, their influences, and their applications pose various challenges for the design of a methodology that provides meaningful results. Methodologies for building-wide testing exist, but their use is mostly limited to associated indoor localization competitions. In this work, the T&E 4iLoc Framework is proposed - a methodology for T&E of indoor localization systems in semi-controlled environments based on a system-level and black-box approach. In contrast to building-wide testing, T&E in semi-controlled environments, such as test halls is characterized by lower costs, higher reproducibility, and better comparability of the results. The limitation of low transferability to real world applications is addressed by an application-driven design approach. The empirical validation of the T&E 4iLoc Framework, based on the examination of a contour-based Light Detection and Ranging ILS, an Ultra Wideband ILS, and a camera-based ILS for the application of Automated Guided Vehicles in warehouse operation, demonstrates the benefits of T&E with the T&E 4iLoc Framework.

The developments of confirmed daily Sars-CoV-2 infections can be modeled a posteriori in a comparatively simple and satisfactory way by means of a special exponential function: its exponential coefficient varies exponentially with time itself. This property enables the function to directly simulate the „daily case“ curve fragments observed for the first waves of the current epidemics in a number of counties and countries. Linear combinations of two or more of the functions allow for the modeling of the complete curves observed in the vast majority of all regions for which case number developments have been tabulated.

Interactive Planning Support Systems (PSS) implemented on a maptable are deemed suitable to support participatory planning processes. Through their interactive nature and user-friendly interface they are supposed to facilitate exchange of knowledge between stakeholders, consensus building among them, group learning processes, and thereby strengthen participation. We analyze in this systematic review, based on 16 case studies using interactive PSS, how such PSS have contributed to the goal of strengthening stakeholder participation. Results show that tools and applications have become more sophisticated in recent years and the goals of the studies changed from collaboratively designing interventions to observing and understanding how the application of such tools contributes to improved plan outcomes and group based learning. However, many case studies lack a proper framework and operationalization for investigating the impacts of the tools and applications on participation. Consequently, impacts on participation are assessed rather incidentally based on implicit assumptions and often no distinction is made between the different aspects of participation. In conclusion, further theoretical studies conceptualizing impacts of interactive PSS on participation are needed as well as empirical studies testing these impacts in real world case contexts with various groups of stakeholders.

There is a great need to develop research-based models for supporting collaboration between educational institutions. Collaboration models are needed, for example, to assist the transition from lower educational level to higher education or from higher education to work life. In this research, collaboration was conducted through a joint upper-secondary school and university course that addressed global challenges by using a project-based learning approach. There is a shortage of research exploring students’ perceptions of collaboration. Therefore, the main purpose of this qualitative case study is to explore the relevance of the joint course for students and university students. The research was guided by the following research question: What kind of relevance did the students experience in the joint project-based learning course? The data was gathered using questionnaires, interviews, and reflective study reports. The data was analyzed via theory-based content analysis where research-oriented relevance model was used as the analysis framework. The analysis framework enabled categorizing experienced relevance on individual, vocational and societal dimensions. Altogether, the analysis produced 7 relevance categories for upper-secondary students and 9 for university students. According to the analysis, upper-secondary school students felt that the course offered the most on an individual relevance dimension whereas university students experienced the vocational relevance dimension most diverse. As the main conclusion, this research produced new insights on the experienced relevance of upper-secondary level and higher education cooperation from the students’ point of view. The acquired knowledge can be useful for everyone developing new cross-institutional cooperation models.

This paper is devoted to the foundational problems of dendrogramic holographic theory (DH-theory). We use the ontic-epistemic (implicate-explicate order) methodology. The epistemic counterpart is based on representation of data by dendrograms constructed with hierarchic clustering algorithms. The ontic Universe is described as the p-adic tree; it is zero dimensional, totally disconnected, disordered, and bounded (in p-adic ultrametric). Interrelation classical-quantum loses its sharpness; generally simple dendrograms are ``more quantum’’ than complex one. We use the CHSH-inequality as a measure of quantum(-likeness). We demonstrate that it can be violated by classical experimental data represented by dendrograms. The seed of this violation is neither nonlocality nor rejection of realism. This is nonergodicity of dendrogramic time series. Generally, violation of ergodicity is one of the basic features of DH-theory. We also consider DH-theory for Minkovski geometry and monitor the dependence of CHSH-violation and nonergodicity on geometry as well as a Lorentz transformation of data.

proposal for a fundamental theory is described in which classical and quantum physics as a representation of the universe as a gigantic dendrogram are unified. The latter is the explicate order structure corresponding to the purely number-theoretical implicate order structure given by p-adic numbers. This number field was zero-dimensional, totally disconnected, and disordered. Physical systems (such as electrons, photons) are sub-dendrograms of the universal dendrogram. Measurement process is described as interactions among dendrograms; in particular, quantum measurement problems can be resolved using this process. The theory is realistic, but realism is expressed via the the Leibnitz principle of the Identity of Indiscernible. The classical-quantum interplay is based on the degree of indistinguishability between dendrograms (in which the ergodicity assumption is removed). Depending on this degree, some physical quantities behave more or less in a quantum manner (versus classic manner). Ideologically, our theory is very close to Smolin’s dynamics of difference and Rovelli’s relational quantum mechanics. The presence of classical behavior in nature implies a finiteness of the Universe-dendrogram. (Infinite Universe is considered to be purely quantum.) Reconstruction of events in a four-dimensional space type is based on the holographic principle. Our model reproduces Bell-type correlations in the dendrogramic framework. By adjusting dendrogram complexity, violation of the Bell inequality can be made larger or smaller.

We provide a biochronology of Jurassic planktonic foramininfera, using first order linkage to ammonite and nannofossil stratigraphy and geochronology. This enigmatic and understudied group of microfossils occurred from middle Toarcian through Tithonian time, from ~180 to ~143 Ma; its origin is unknown. There are three genera: Globuligerina, Conoglobigerina and Petaloglobigerina. The genus Globuligerina, with a smooth to pustulose test surface texture appeared in Toarcian (late Early Jurassic) and Conoglobigerina, with a rough reticulate test surface texture in Oxfordian (early Late Jurassic) time. The genus Petaloglobigerina, with a petaloid last whorl and one or more twisted and claviform chambers evolved in early Kimmeridgian time from Globuligerina balakhmatovae. We recognize stratigraphic events from eleven species across four evolutionary lineages, calibrated to Geologic Time Scale 2020. A dramatic faunal change over, which is not well documented led to the survival of only one taxon, most likely Gobuligerina oxfordiana in the Tithonian. During the Berriasian several new taxa appeared.

This study investigated the breakdown trend in an automated production with an aim to recommend the application of Reliability-centered maintenance (RCM) for an improved productivity via a new preventive maintenance (PM) program. Individual Section-forming machine (ISM): a glass blowing machine for making glass bottles was used as the case study of an automated production system. The machine parts and the working mechanisms were analysed with a special focus on methods of processes and procedures that will enable the ISM maintenance department run more effective and achieve its essential goal of ensuring effective machine operation and reducing machine downtime. In this work, information is provided on the steps and procedures to identify critical components of the ISM using Failure Modes and Effect Analysis (FMEA) as a tool to develop an optimal maintenance program based on the reliability data of the equipment’s functional components. A relationship was established between the failure rate of the machine components and the maintenance costs such that using the recommended PM program, an evidence of improvement in the machine’s availability, safety and cost-effectiveness will result into an increase in the company’s profit margin.

The accurate prediction of heat load profiles with a daily resolution is required for a broad range of applications such as potential studies, design, or predictive operation of heating systems. If the heat demand of a consumer is mainly caused by (production) processes independent of the ambient temperature, existing load profile prediction methods fail. To close this gap, this study develops two ex post machine learning models for the prediction of the heat demand with a daily resolution. The selected input features are commonly available to each consumer connected to public natural gas and electricity grids or operating an energy monitoring system: Ambient temperature, weekday, electricity consumption, and heat consumption of the last seven days directly before the predicted day. The study’s database covers electricity and natural gas consumption load profiles from 82 German consumers over a period of two years. Electricity and heat consumption correlate strongly with individual patterns for many consumers. Both, shallow and deep learning algorithms are evaluated. The highest accuracy is achieved by a Long Short Term Memory (LSTM) model with a median of R² of 0.94. The ex post model architecture makes the model suitable for automated anomaly detection in energy monitoring systems.

Public participation is significant for the success of any urban planning project. However, most members of the general public are not planning professionals and may not understand the technical details of a 2D paper-based plan, which might hamper their participation. One way to expand the participation of citizens is to present plans in well-designed, user-friendly and interactive platforms that allow participation regardless of the technical skills of the participants. This paper investigates the impacts of the combined use of 3D visualization and E-participation on public participation in Kisumu, Kenya. A 3D City model, created with CityEngine2016, was exported into a web-based geo-portal and used as a Planning Support System in two stakeholder workshops in order to evaluate its usability. For e-participation, 300 questionnaires given out to planning practitioners. Five indicators were developed for evaluating the usability of the 3D model while the usability of e-participation was evaluated using communication, collaboration and learning as indicators. Results showed that effectiveness and efficiency varies within different professional groups while the questionnaires showed strong preference for e-participation methods, especially SMSs/USSDs and emails. The study concludes that the use of 3D visualization and E-participation has the potential for improving the quality and quantity of public participation and recommends further research on the subject.

To address the question whether there is evidence that drinking water in general or mineral water in particular is effective in preventing diabetes; we performed a literature search of randomized controlled trials (PubMed). The search resulted in very few trials (N = 9) investigating this topic: one trial investigates the effect of increasing water consumption on glycemic control in diabetic patients; two trials investigate the effect of drinking water with a meal in diabetic patients; while six trials compare the effect of mineral rich water with that of low mineralized water on glucose metabolism in healthy subjects. There is evidence that increasing water consumption can improve glucose metabolism and randomized controlled trials with mineral water suggest that waters containing relevant amounts of magnesium can exert an additional effect. The role of bicarbonate; which is present in all the mineral waters used in the trials; will be discussed. Future research needs to investigate the effect of mineral water in prediabetic individuals or individuals with impaired glycemic control.

Accurately estimating the current state of local traffic scenes is one of the key problems in the development of software components for automated vehicles. In addition to details on free space and drivability, static and dynamic traffic participants, information on the semantics may also be included in the desired representation. Multi-layer grid maps allow to include all this information in a common representation. However, most existing grid mapping approaches only process range sensor measurements such as LIDAR and Radar and solely model occupancy without semantic states. In order to add sensor redundancy and diversity it is desired to add vision based sensor setups in a common grid map representation. In this work, we present a semantic evidential grid mapping pipeline including estimates for eight semantic classes that is designed for straightforward fusion with range sensor data. Unlike in other publication our representation explicitly models uncertainties in the evdiential model. We present results of our grid mapping pipeline based on a monocular vision setup and a stereo vision setup. Our mapping resulsts are accurate and dense mapping due to the incorporation of a disparity- or depth-based ground surface estimation in the inverse perspective mapping. We conclude this paper by providing a detailed quantitative evaluation based on real traffic scenarios in the Kitti odometry benchmark and demonstrating the advantages compared to other semantic grid mapping approaches.

Superficial discolored spots on Atlantic salmon (Salmo salar) fillets are a serious quality problem for commercial seafood farming. Previous reports proposed that the black spots (called melanized focal changes (MFC)) may be melanin, but no convincing evidence has been reported. In this study, we performed chemical characterization of MFC, and also of red pigment (called red focal changes (RFC)), of salmon fillets using alkaline hydrogen peroxide oxidation and hydroiodic acid hydrolysis. This revealed that the MFC contain 3,4-dihydroxyphenylalanine (DOPA)-derived eumelanin whereas the RFC only contain trace amounts of eumelanin. Therefore, probably, the black color of MFC can be explained by the presence of eumelanin from accumulated melanomacrophages. For the red pigment, we could not find a significant signature of either eumelanin or pheomelanin, and the red color is probably predominantly hemorrhagic in nature. However, we found that in RFC the level of pigmentation did increase together with some melanogenic metabolites. Comparison with a “mimicking experiment,” in which a mixture of a salmon homogenate + DOPA was oxidized with tyrosinase, suggested that the RFC include conjugations of DOPAquinone and/or DOPAchrome with salmon muscle tissue proteins. In short, the results suggest that melanogenic metabolites in MFC and RFC derive from different chemical pathways, which would agree with the two different colorations deriving from distinct cellular origins, namely melanomacrophages and red blood cells, respectively.

Process induced defects during thermoforming are widespread problems in laminate manufacturing. The aim of this study is to describe the effects of holding time and pressure on several properties of the manufactured laminate. A design of experiments is performed, followed by an analysis of variance to examine significant effects. Subsequently, a regression model is created to predict the laminate’s properties, which is also validated. The highest values of tensile strength and elongation at break are found for low settings of holding time and pressure. The fibre volume fraction is not affected by the process parameters. As holding time and pressure increase, significant fibre misalignment takes place, leading to a decrease of the mechanical properties. The regression model corresponds well with the validation and should be extended with further variables in subsequent studies.

The development of hydrogen plasma smelting reduction as a CO₂ emission-free steel-making process is a promising approach. This study presents a concept of the reduction of hematite using hydrogen thermal plasma. A laboratory scale and pilot scale hydrogen plasma smelting reduction (HPSR) process are introduced. To assess the reduction behavior of hematite, a series of experiments has been conducted and the main parameters of the reduction behavior, namely the degree of hydrogen utilization, degree of reduction and the reduction rate are discussed. The thermodynamic aspect of the hematite reduction is considered and the pertinent calculations have been carried out using FactSage^TM 7.2. The degree of hydrogen utilization and the degree of reduction were calculated using the off-gas chemical composition. The contribution of carbon, introduced from the graphite electrode, ignition pin and steel crucible, to the reduction reactions was studied. The degree of reduction of hematite, regarding H₂O, CO and CO₂ as the gaseous reduction products, is determined. It is shown that the degree of hydrogen utilization and the reduction rate were high at the beginning of the experiments, then decreased during the reduction process owing to the diminishing of iron oxide. Conducting experiments with the high basicity of slag B₂=2 led to a decrease of the phosphorus concentration in the produced iron.

Phytoplasma diseases pose a substantial threat to diverse crops of agricultural importance. Management measures are usually implemented only after the disease has already occurred. Early detection of such phytopathogens, prior to disease outbreak, has rarely been attempted but would be highly beneficial for phytosanitary risk assessment, disease prevention and mitigation. In this study we present the implementation of a recently proposed proactive disease management protocol (DAMA: Document, Assess, Monitor, Act) for a group of vector-borne phytopathogens. We used insect samples collected during a recent biomonitoring program in southern Germany to screen for the presence of phytoplasmas. Insects were collected with Malaise traps in different agricultural settings. DNA was extracted from these mass trap samples and subjected to PCR-based phytoplasma detection and COI sequence metabarcoding. In about 1% of the analyzed samples, phytoplasma DNA was detected. Phytoplasma group identification was performed by 16S rRNA gene sequence analysis and the detected phytoplasmas could be assigned to the 16SrI subgroups B and L. Insect species in the sample were identified by DNA metabarcoding. By using established databases, checklists, and archives, we documented historical associations and records of phytoplasmas and its hosts in the study region. For the assessment in the DAMA protocol, phylogenetic triage was performed in order to determine the risk for tri-trophic interactions (plant-insect-phytoplasma) and associated disease outbreaks in the study region. A phylogenetic heat map constitutes the basis for risk assessment and was used here to identify a minimum number of seven leafhopper species suggested to be monitored by stakeholders in this region. A proactive stance in monitoring changing patterns of association between hosts and pathogens can be a cornerstone in capabilities to prevent future phytoplasma disease outbreaks. To our knowledge, this is the first time that the DAMA protocol has been applied in the field of phytopathology and vector-borne plant diseases.

Vision impairment may delay responses to hazards when driving. In a proof-of-concept driving simulator study, we evaluated a hazard warning device designed for vision impaired drivers. Three groups participated: 11 persons with central vision loss (CVL; median age 60 years), 12 with homonymous field loss (HFL; 52 years) and 11 with normal vision (NV; 60 years). CVL is characterised by impaired visual acuity and contrast sensitivity while HFL is a loss of vision in the same half of the visual field (blind side) in both eyes. Participants completed drives with and without the device which gave a directional vibro-tactile warning for an approaching pedestrian hazard when collision risk exceeded a pre-defined threshold. Warnings significantly (p< 0.001) reduced brake response times for CVL (∆= 0.54s) and HFL (∆= 0.30s), but not NV participants. For HFL participants, the reduction was greater (p = 0.02) for hazards on the blind (∆= 0.57s) than seeing side (∆= 0.10s). The warnings significantly reduced collision rates for CVL participants from 11 to 0% (all hazards) and for HFL participants from 30 to 1.7% (blind side hazards). Thus, hazard warnings may be beneficial in improving safety of vision impaired drivers; further research is warranted.

The Neotropical region is one of the most diverse regions of the globe in terms of macro-organismic species. Regarding the microbial world, however, little is known about the diversity and biogeography patterns of micro-organisms in the Neotropics. In this context, the study of several microbial taxonomic groups is still missing and/or incomplete, such as the protists. Our goal here was to summarize the available information of Neotropical protists, focusing on molecular data from environmental continental samples, to explore what these data evidence on their ecology and biogeography. For this, we reviewed the findings from all articles that focused on or included the terrestrial protists using metabarcoding approach and identified the gaps and future perspectives in this research field. We found that Neotropical protists diversity patterns seem to be, at least in part, congruent with that of macro-organisms and, different than plants and bacteria, just weakly explained by environmental variables. We argue that studies with standardized protocols including different biomes are necessary to fully characterize the ecology and biogeography on Neotropical protists. Furthermore, dismember evolutionary lineages and functional guilds of protists are important to better understand the relationship between diversity, dispersal abilities and functionality of particular taxa of protists in their habitats.

A Twi-English parallel corpus is certainly an important resource for Machine Translation of Twi (ISO 639-3), a Low-Resource African Language (LRAL) which is mainly spoken in Ghana and Ivory Coast. Currently large-scale multi-domain Twi-English parallel corpus is still unavailable partly due to the difficulties and the arduous efforts required in its design. In this paper, we present TWIENG: a large-scale multi-domain Twi-English parallel corpus. We crawled the sentences from the web using web crawlers, translated, aligned, tokenized and compiled to create the corpus. We crawled English sentences from Ghanaian indigenous electronic news portals, Ghanaian Parliamentary Hansards, Twi Bible and crowdsourcing via google forms. The sentences were translated by professional translators and linguists, they were then aligned, tokenized and compiled. The corpus was curated using the sketch engine, a corpus manager and analysis software developed by Lexical Computing Limited. The corpus was manually evaluated by Twi professional linguists. The Corpus has 5,419 parallel sentences.

We study the efficient computation of power indices for weighted voting games with precoalitions amongst subsets of players (reflecting, e.g., ideological proximity) using the paradigm of dynamic programming. Starting from the state-of-the-art algorithms for computing the Banzhaf and Shapley-Shubik indices for weighted voting games we present a framework for fast algorithms for the three most common power indices with precoalitions, i.e. the Owen index, the Banzhaf-Owen index and the Symmetric Coalitional Banzhaf index, and point out why our new algorithms are applicable for large numbers of players. We discuss implementations of our algorithms for the three power indices with precoalitions in C++ and review computing times as well as storage requirements.

Background: Nursing home residents (NHRs) have special needs and may experience reduced functionality, higher sedentary behavior time (SBT) and decreased physical activity (PA). This study aimed to characterize NHRs based on SBT, PA, and functional performance (FP), and to identify associations between these factors. Methods: Cross-sectional study with 65 NHRs aged ≥60, evaluated by accelerometer (SBT, PA) and the following tests: Timed Up and Go (TUG), Short Physical Performance Battery (SPPB), Barthel Index (BI), and Mini-Mental State Examina-tion (MMSE). Health-related variables and anthropometry were assessed. The FP (TUG, SPPB, BI), SBT, PA intensities were used for K-means clustering analysis. Results: The cluster analysis identified: C1 – better FP, shorter SBT, and longer time in PA intensities; C2 - lower FP, longer SBT, and shorter time in PA. In addition, C2 were older, with lower MMSE, lower body mass index, and walking aids use. The SBT showed a negative weak correlation with BI. The moderate PA (MPA) was moderately correlated with the SPPB and strongly correlated with the TUG and BI. Conclusions: MPA is strongly associated with better FP and independence. NHRs have dif-ferent physical and cognitive profiles, which indicates the need for personalized strategies to prevent disability and increase PA.

Rice is currently the most important food crop in the world and we are only just beginning to study the bacterial associated microbiome. It is of importance to perform screenings of the core rice microbiota and also to develop new plant-microbe models and simplified communities for increasing our understanding about the formation and function of its microbiome. In order to begin to address this aspect, we have performed the isolation of hundreds bacterial isolates obtained from endorhizosphere of two rice cultivars from Venezuela. The validation of plant-growth promoting bacterial activities in vitro has led us to select and characterize 15 isolates for in planta studies such as germination test, endophytism ability and plant growth promotion. Consequently, a set of 10 isolates was selected for the set-up of an endophytic consortium as a simplified model of the natural rice bacterial endomicrobiota. Upon inoculation, the colonization and abundance of each strain within the rice roots was tracked by a culture-independent technique in gnotobiotic conditions in a 30 days period. Four strains belonging to Pseudomonas, Agrobacterium and Delftia genera have shown a promising capacity for colonizing and coexistence in root tissues. On the other hand, a bacterial community taxonomic profiling of the rhizosphere and the endorhizosphere of both cultivars were obtained and are discussed. This study is part of a growing body of research on core crops microbiome and simplified microbiomes, which strengthens the formation process of the endophytic community leading to a better understanding of the rice microbiome.

With the megatrend of digitalization, the demand for sensors in previously difficult to access scenarios is increasing. Filament-shaped sensors (FSS) are ideal for this demand especially in applications in which the monitoring of textile structures is the focus. Electrically conductive bicomponent filaments based on thermoplastic polyurethane (TPU) and doped with carbon nanotubes (CNTs) offer great potential due to the flexible mechanical properties. Through the core-conducting, bicomponent structure the sensing material is protected from environmental factors such as surrounding conductive materials and external moisture. The insulating material, however, simultaneously complicates the contacting method in order to measure sensing changes in the conductive core. In this work laser cutting is employed as a technology in order to expose the conductive core of the filaments. The filament is then coated with silver and mechanically crimped, providing both a conductive interface for the data acquisition device as well as a protective layer. Laser parameters (power and speed) are investigated in order to identify the parameters with the best cutting properties which is analyzed visually as well as electrically. The work conducted here can then be used in order to provide a robust and reproducible contacting method for core-conducting TPU filaments for strain sensing applications.

Residual stresses in fiber metal laminates (FML) inevitably develop during the manufacturing process. The main contributor to these stresses is the difference in the coefficients of thermal expansion (CTE) between fibers and metal in combination with high process temperatures. To quantify these stresses, the use of specimens with an asymmetric layup is an easily adaptable method. The curvature that develops after the manufacturing of flat laminates with an asymmetrical layer stack is a measure of the level of residual stresses evolving during cure. However, the accuracy of the curvature evaluation is highly dependent on specimen design and other influencing parameters. In this work a large set of FML specimens is investigated to identify relevant influencing parameters and derive conclusions about specimen design and evaluation techniques. For certain layups and process parameters, there is a good correlation between the curvature and the stress-free temperature, which is further covered by analytical solutions for bimetals. This correlation is the basis to transfer curvature into a stress-free temperature that can consequently be used for the quantification of residual stress levels in more complex FMLs. The transfer is validated by in-situ strain measurements during cure using a strain gage technique. Based on the results, the application of asymmetric specimens for residual stress characterization in more complex laminates is presented in the form of a workflow.

Diabetes mellitus (DM) is one of the most dangerous metabolic diseases with high rate of mortality worldwide. It is well known that insulin resistance and deficiency in insulin production from pancreatic β-cells are the main characteristic of DM. Due to the detrimental side effects of the current treatment, there is a considerable need to develop new effective antidiabetic drugs, especially alpha-glucosidase and alpha-amylase inhibitors with lesser adverse effects. These inhibitors are known to be directly involved in the delay of carbohydrate digestion, resulting in a reduction of glucose absorption rate and consequently reduce the post-prandial raise of plasma glucose, which can reduce the risk of long-term diabetes complications. Hence, natural products are well-known sources for the discovery of new scaffold for drugs discovery, including new antidiabetic drugs. The phytochemical investigation of Salvia aurita collected from Hogobach pass, Eastern Cape, South Africa (SA), yielded four known abietane diterpenes namely carnosol (1), rosmanol (2), 7-methoxyrosmanol (3), 12-methoxycarnosic acid (4) and one flavonoid named 4,7-dimethylapigenin (5). Structural characterization of these isolated compounds was conducted using 1 and 2D NMR, in comparison with reported spectroscopic data. These compounds are reported for the first time from S. aurita. The biological evaluation of the isolated compound against alpha-glucosidase exhibited strong inhibitory activities for 3 and 2 with IC50 values of 4.2 ± 0.7 and 16.4 ± 1.1 µg/mL respectively, while 4 and 1 demonstrated strong alpha-amylase inhibitory activity amongst the isolated compounds with IC50 of 16.2 ± 0.3 and 19.8 ± 1.4 µg/mL. Molecular docking analysis confirms strong inhibitory activity of 3 against alpha-glucosidase. Additionally, excellent antioxidant capacities were displayed by 2, 1 and 3 respectively as ORAC (25789.9 ± 10.5; 23961.8 ± 14.1; 23939.3 ± 2.4) µM TE/g; 1 and 2 as FRAP (3917.8 ± 2.1; 1522.3 ± 0.9) µM AAE/g; 5 and 2 as TEAC (3190.4 ± 2.8; 2055.0 ± 2.6) µM TE/g. The methanolic extract of S. aurita is a rich source of abietane diterpenes with excellent antioxidant and anti-diabetic activities that can be useful to modulate oxidative stress, and might possibly be excellent candidates for the management of diabetes. This is the first scientific report on the phytochemical isolation and biological evaluation of alpha-glucosidase and alpha-amylase inhibitory activities of Salvia aurita.

In this work, a small-strain phase-field model is presented, which is able to predict crack propagation in systems with anisotropic brittle and ductile constituents. To model the anisotropic brittle crack propagation, an anisotropic critical energy release rate is used. The brittle constituents behave linear-elastically, in a transversely isotropic manner. Ductile crack growth is realised by a special crack degradation function, depending on the accumulated plastic strain, which is calculated by following the J2-plasticity theory. The mechanical jump conditions are applied in solid-solid phase transition regions. The influence of the relevant model parameters on a crack, propagating through a planar brittle-ductile interface, and furthermore a crack developing in a domain with a single anisotropic brittle ellipsoid, embedded in a ductile matrix, is investigated. We demonstrate that important properties, concerning the mechanical behaviour of grey cast iron, such as the favoured growth of cracks along the graphite lamellae and the tension-compression load asymmetry of the stress-strain response, are covered by the model. The behaviour is analysed on basis of a simulation domain consisting of three differently oriented elliptical inclusions, embedded in a ductile matrix, which is subjected to tensile and compressive load. The used material parameters correspond to graphite lamellae and pearlite.

Rice is currently the most important food crop in the world and we are only just beginning to study the bacterial associated microbiome. It is of importance to perform screenings of the core rice microbiota and also to develop new plant-microbe models and simplified communities for increasing our understanding about the formation and function of its microbiome. In order to begin to address this aspect, we have performed the isolation of bacterial strains from the endorhizosphere of two rice cultivars from Venezuela. The validation of plant-growth promoting bacterial activities in vitro has led us to select and characterize 15 isolates for in planta studies such as germination test, endophytism ability and plant growth promotion. Consequently, a set of 10 isolates was selected for the set-up of an endophytic consortium as a simplified model of the natural rice bacterial endomicrobiota. Upon inoculation, the colonization and abundance of each strain within the rice roots was tracked by a culture-independent technique in gnotobiotic conditions in a 30 days period. Four strains belonging to Pseudomonas, Agrobacterium and Delftia genera have shown a promising capacity for colonizing and coexistence in root tissues. On the other hand, a bacterial community taxonomic profiling of the rhizosphere and the endorhizosphere of both cultivars were obtained and are discussed. This study is part of a growing body of research on core crops microbiome and simplified microbiomes, which strengthens the formation process of the endophytic community leading to a better understanding of the rice microbiome.

Background: The hydatidiform moles remain prevalent in spectrum of gesta-tional trophoblastic diseases (GTDs). In resource-limited settings like Rwanda, the definitive diagnosis relies upon single of histomophological diagnosis. The histomorphology alone suffers from high interobserver and intra-observer vari-ability with poor diagnostic reproducibility. The present study aimed at deter-mining the role of p57 immunophenotyping in the validation of histomorpholog-ical diagnosis of hydatidiform moles. Methods: A retrospective cross-sectional study embarked for histological cases collected between January 2017 and June 2020. A review of Hematoxylin &Eosin(H&E) stained slides was performed with subsequent p57 immunohisto-chemical staining. Results: Recorded were 211 retrospective cases of hydatidiform moles and 96 (45.9%) cases were all subjected to p57 immunohistochemical staining consid-ered as gold standard diagnostic modality in the present study. As result, the sensitivity and specificity of the histomophological diagnosis of complete hyda-tidiform mole were estimated at 62.5% and 57.1% respectively with positive and negative likelihood ratio of 0.145 and of 0.54 respectively. PPV and NPV were 81.8% and 29.3%, respectively. Whereas of 57.1% and 79.2% with PPV and NPV of 42.9% and 83.8% respectively for partial hydatidiform moles. Per the Youden J statistics method, the accuracy estimation of histomophological diagnosis of hydatidiform mole (HM) was 0.196 (CHM) and 0.336(PHM). Conclusions: This study highlighted a need to integrate p57 immunostaining in routine histopathological diagnosis of hydatidiform moles refining the defini-tive diagnosis.

Education and awareness raising are the primary tools of global health policy to change public behaviour. Considering the limitations of awareness agenda and the lack of social research to inform alternative approaches, our objective was to generate new empirical evidence on the consequences of antibiotic-related awareness raising in a low-income country context. We implemented an educational activity in two Lao villages to share general antibiotic-related messages, but also to learn about people’s conceptions and health behaviours. Two rounds of census survey data enabled us to assess the activity’s outputs, its knowledge outcomes, and its immediate behavioural impacts in a difference-in-difference design. Our panel data covered 1,130 adults over two rounds, including 58 activity participants and 208 villagers exposed indirectly via conversations in the village. We found that activity-related communication circulated among more privileged groups, which limited its indirect effects. Among participants, the activity influenced the awareness and understanding of “drug resistance,” while effects on attitudes were minor. Evidence on behavioural impacts was sparse and mixed, but the range of possible consequences included a disproportionate uptake of antibiotics from formal healthcare providers. Our study casts doubt on the continued dominance of awareness raising as a behavioural tool to address antibiotic resistance.

Background and Objectives: Jehovah's Witnesses (JW) reject the transfusion of blood components based on their religious beliefs even if they are in danger of harm or death. In cardiac surgery, this significantly reduces the margin of safety and leads to ethical conflicts. Informed consent should be carefully documented and the patient's family should be involved. This study aims to compare the postoperative course of JW who underwent major cardiac surgery with a similar population of non-Witnesses (NW). Patients and Methods: Demographic, procedural, and postoperative data of all consecutive JW who underwent cardiac surgery at our institution were obtained from the records. They were compared with a propensity score matched group of NW. Anemic JW were treated with erythropoietin and/or iron as needed. Cardiac surgery was performed by experienced surgeons using median sternotomy and cardiopulmonary bypass. Common blood-sparing techniques were routinely used. Periprocedural morbidity and mortality were statistically evaluated for both groups. Results: 32 JW and 64 NW were part of the matched dataset showing no demographic or procedural differences. EPO was used preoperatively in 34.4% and postoperatively in 15.6% of JW but not in NW. Preoperative hemoglobin levels were similar (JW, 8.09±0.99 mmol/l; NW, 8.18±1.06; p=0.683). JW did not receive any transfusions except for one who revoked, while NW transfusion rates were 2.5±3.1 units for red cells (p&lt;0.001) and 0.3±0.8 for platelets (p=0.018). Postoperative levels differed significantly for hemoglobin (JW, 6.05±1.00 mmol/l; NW, 6.88±0.87; p&lt;0.001), and hematocrit (JW, 0.29±0.04; NW, 0.33±0.04; p&lt;0.001) but not for creatinine. Early mortality was similar (JW, 6.3%; NW, 4.7%; p=0.745). There were more pacemakers and pneumonias in JW, while all other postoperative conditions were not different. Conclusions: Real-world data indicate that Jehovah's Witnesses can safely undergo cardiac surgery provided that patients are preconditioned and treated by experienced surgeons who use blood-saving strategies. Postoperative anemia is observed but does not translate into a worse clinical outcome. This is consistent with other studies.

The paper highlights the performance of the seismic isolation devices, installed on retrofitted buildings in reducing the seismic response when subjected to earthquakes. Two buildings from the beginning of the XX-th century in Bucharest are chosen from many more, monitored over the city area. We discuss the response of these base-seismic isolated structures, relying on good quality data acquired from the recent strong earthquake (03.11.2022, MW = 5.0). Elastic response spectra computed from recordings at two levels of each structure are used, placed under and right above the isolating layer. At one building the existence of previous recordings and the particularity of the sensors allow a comparison with other two relatively recent medium intensity earthquakes. The assessment is carried out in terms of maximum acceleration amax, measured at certain levels in each structure, spectral acceleration amplitude SAmax and spectral-peak corresponding period. We find that the base-isolation methodology is effective in reducing the response of the building right above the isolating layer, an observation valid for both structures, all components of the recordings, and spectral acceleration values. Moreover, the outcomes from the modal evaluation performed prior to rehabilitation and seismic isolation process are presented, by pointing out a higher newly acquired fundamental period of the isolated structures.

Background: Alcohol consumption is associated with the development of cardiovascular diseases, cancer, and liver disease. The biological mechanisms are still largely unclear. Here, we aimed to use an agnostic approach to identify phenotypes mediating the effect of alcohol on various diseases. Methods: We performed an agnostic association analysis between alcohol consumption (red, and white wine, beer/cider, fortified wine, and spirits) with over 7,800 phenotypes from the UK biobank comprising 223,728 participants. We performed Mendelian randomisation analysis to infer causality. We additionally performed a Phenome-wide association analysis and a mediation analysis between alcohol consumption as exposure, traits in causal relationship with alcohol consumption as mediators, and various diseases as outcome. Results: Of 45 traits in association with alcohol consumption, 20 were in causal relationship with alcohol consumption. Gamma glutamyltransferase (GGT; β=9.44; CI,5.94-12.93; Pfdr=9.04×10-7), mean sphered cell volume (β=0.189; CI,0.11-0.27; Pfdr=1.00×10-4), mean corpuscular volume (β=0.271; CI,0.19-0.35; Pfdr=7.09×10-10) and mean corpuscular haemoglobin (β=0.278; CI,0.19-0.36; Pfdr=1.60×10-6) showed the strongest causal relationships. We also identified GGT and physical activity as mediators causing liver cirrhosis and alcohol dependence. Conclusion: Our study provides evidence of causality between alcohol consumption and 20 traits and a mediation effect for physical activity on health consequences of alcohol consumption.

Mucosal irritation caused by cusps of upper and lower teeth represents a source of persistent, low grade mechanical trauma. This type of trauma can initiate and/or perpetuate oral lichen planus in a few susceptible patients. Here, we report a rare case of bilateral white linear striations in the buccal mucosa of a young patient, associated with sharp cusps. Oral lesions demonstrated a unique cuspal signature highlighting the causal role of subtle mucosal trauma in the genesis of reticular-oral lichen planus. Lesions appeared to be exacerbated by significant psychological distress experienced by the patient. Although the Koebner phenomenon is well reported in the cutaneous lichen planus literature, such presentations are relatively rare in the oral cavity. This report emphasizes the potential role of low-grade cuspal trauma/irritation in conjunction with psychological distress in the genesis of oral lichen planus.

On February 28, 2023, the Facebook page of the United Nations Children's Fund (UNICEF) South Africa, announced the beginning of the HPV vaccination campaign for 2023. The aim of this study was to examine the attitudes of Facebook users, who commented on the UNICEF South Africa post, towards HPV vaccination to inform the development and implementation of interventions that can increase HPV vaccine acceptance and uptake. Several comments were questions regarding the eligible criteria for vaccination, side effects, consent form, and vaccination strategies. Many Facebook users were hesitant towards HPV vaccination due to various reasons including concerns around side effects, religious beliefs, vaccine stock outs, and their distrust in the institutions or systems involved in vaccination programmes. Few users accepted HPV vaccination because they believed that it was very important thing to do, beneficial for the children’s health, and they have vaccinated they children before. Our findings of the current study contribute to the promotion of acceptance and uptake of HPV vaccination by developing and implementing interventions tailored to address identified barriers that are associated with hesitant to HPV vaccination.

Synthesis of styrene butadiene hybrid latex was performed via emulsion polymerization technique using various amount of laponite clay as filler. Laponite clay was modified with cationic surfactant methyl triphenylphosphonium bromide (MTPB) with ion exchange technique prior to polymerization process. The main objective of the modification is to render the surface of the clay layers to more organophilic. Emulsion polymerization was performed under semi batch process using 2 L laboratory stainless steel reactor with temperature 85°C to 90°C for 8 hours. Polymer hybrid styrene butadiene latex was characterized for its physical and chemical properties with standard ASTM Methods. Characterization of its binding and printing properties were carried out with standard testing method (TAPPI Methods) using single coating formulation on 80 gsm woodfree paper. Polymer hybrid latex based on styrene and butadiene monomers with laponite clay enhanced binding and printing properties of coated paper, addition of laponite clay to 6.0 wt % increased the binding resistance of the coated paper two times higher than pure latex. Reducing binder level become possible for cost saving.

Decades of illegal hunting (poaching) have adversely affected wildlife populations and thereby limited sustainable wildlife conservation in the Luangwa Valley, Zambia. Despite intervention efforts to address the problem, illegal hunting of wildlife has persisted. Therefore, this study was conducted to understand the persistence of illegal hunting by investigating drivers of poaching and intervention measures using mixed-methods approach. Stratified random sampling was used to collect data from 346 respondents through structured questionnaires. Purposive sampling was used to collect data through nine (9) focus group discussions and three (3) in-depth interviews with experts. The study revealed that persistent illegal hunting was mainly driven by people’s critical needs for survival and sustaining livelihoods and not by inadequate law enforcement as presumed by resource managers. Although law enforcement was the most prevalent intervention measure, it did not deter local illegal hunters because the main motivations for poaching were not effectively addressed. The key implication of findings is that where illegal harvesting of natural resources in protected areas by local resource users is driven by people’s critical needs for survival and livelihoods which are ineffectively addressed, illegal harvesting may persist even with increased law enforcement. The study provides empirical evidence, novel conceptual knowledge and understanding on how prevalent drivers of poaching and other factors may have influenced persistent illegal hunting in the Luangwa Valley.

Slow growth of calcite in confinement is abundant in Nature and man made materials. There is ample evidence that such confined growth may create forces that fracture solids. The thermodynamic limits are well known but since confined crystal growth is transport limited and difficult to control in experiment we have almost no information on the mechanisms or limits of these processes. We present a novel approach to in situ study of confined crystal growth using microfluidics for accurate control of the saturation state of the fluid and interferometric measurement of the topography of the growing confined crystal surface. We observe and explain the diffusion limited confined growth structures observed and can measure the crystal "floating" on a fluid film of 10-40~nm thickness due to the disjoining pressure. We find that there are two end member behaviours: smooth or intermittent growth in the contact region, the latter being faster than the former.

Exoskeletons designed to assist patients with activities of daily living are becoming increasingly popular, but still are subject to research. In order to gather requirements for the design of such systems, long-term gait observation of the patients over the course of multiple days in an environment of daily living are required. In this paper a wearable all-in-one data acquisition system for collecting and storing biomechanical data in everyday life is proposed. The system is designed to be cost efficient and easy to use, using off-the-shelf components and a cloud server system for centralized data storage. The measurement accuracy of the system was verified, by measuring the angle of the human knee joint at walking speeds between 3 and 12 km/h in reference to an optical motion analysis system. The acquired data was uploaded to a cloud database via a smartphone application. Verification results showed that the proposed toolchain works as desired. The system reached an RMSE from 2.9° to 8°, which is below most of the comparable system. The system provides a powerful, scalable platform for collecting and processing biomechanical data, which can help to automize the generation of an extensive database for human kinematics.

We show how the excitonic features of biaxial MoS₂ flakes are very sensitive to biaxial strain. We find a lower bound for the gauge factors of the A exciton and B exciton of (-41 ± 2) meV/% and (-45 ± 2) meV/% respectively, which are larger than those found for single-layer MoS₂. Interestingly, the interlayer exciton feature also shifts upon biaxial strain but with a gauge factor that is systematically larger than that found for the A exciton, (-48 ± 4) meV/%. We attribute this larger gauge factor for the interlayer exciton to the strain tunable van der Waals interaction due to the Poisson effect (the interlayer distance changes upon biaxial strain).

Urea cycle disorders (UCDs) are common inborn errors of metabolism, with an incidence of one in 30,000 births. They are caused by deficiencies in any of six enzymes and two carrier proteins, the most common being Ornithine Transcarbamylase Deficiency (OTCD). OTCD results in impairment to excrete nitrogen, causing toxic buildup of ammonia with resultant encephalopathy. Hyperammonemia (HA) induces the conversion of glutamate to glutamine in the brain. Excess glutamine in the brain causes osmotic changes cerebral edema, changes in astrocyte morphology, and cell death. Acute symptoms of HA include vomiting, hyperventilation, seizures, and irritability. Long-term neurological changes include deficits in working memory and executive function. To date, there are no predictors of prognosis of infants with neonatal onset OTCD outside of plasma ammonia level at presentation and duration of hyperammonemic coma. We provide a comprehensive analysis of a 16-year-old male with neonatal onset of OTCD as an example of how brain biomarkers may be useful to monitor disease course and outcome. This male presented at 8 days post natal with plasma ammonia and glutamine of 677 and 4024 micromol/L and had a missense mutation in Exon 4 (p.R129H). Treatment included protein restriction, sodium benzoate, and citrulline, arginine, and iron. He suffered recurrent acute hyperammonemic episodes despite compliance, triggered by infections or catabolic stressors. We discuss the long-term effects of the hyperammonemic episodes by following MRI based disease biomarkers.

Cladding is typically used to protect components from wear and corrosion while also improving the aesthetic value and reliability of the substrate. The cladding process induces significant residual stresses due to the temperature difference between the substrate and the clad layer. However, these residual stresses could be effectively utilized by modifying processes and geometrical parameters. This paper introduces a novel methodology for using the weld-cladding process as a cost-effective alternative to various existing reinforcement techniques. The numerical analyses are performed to maximize the reinforcement of a cylindrical tool. The investigation of how the weld cladding develops compressive stresses on the specimen in response to a change in the weld beads and the welding sequence is presented. For the benchmark shape, experimental verification of the numerical model is performed. The impact of the distance between the weld beads and the effect of the tool diameter is numerically investigated. Furthermore, the variation in compressive stresses due to temperature fluctuations during the extrusion process has been evaluated. The results showed that adequate compressive stresses are generated on the welded parts through the cladding process after cooling. Hence, the targeted reinforcement of the substrate can be achieved by optimizing the welding sequence and process parameters.

Replacing carbon by hydrogen is a huge step towards reducing CO₂ emissions in the iron- and steel-making industry. The reduction of iron oxides using hydrogen plasma smelting reduction as an alternative to conventional steel-making routes has been studied at Montanuniversitaet Leoben, Austria. The aim of this work was to study the slag formation during the reduction process and the reduction behaviour of iron oxides. Furthermore, the reduction behaviour of iron ore during continuous feeding was assessed. Mixtures of iron ore and calcined lime with a basicity of 0, 0.8, 1.6, 2.3, and 2.9 were melted and reduced by hydrogen. The off-gas composition was measured during the operations to calculate the process parameters. The reduction parameters, namely the degree of reduction, degree of hydrogen utilisation, produced iron, and slag, are presented. The results of the batch-charged experiments showed that at the beginning of the reduction process, the degree of hydrogen utilisation was high, and then, it decreased over the operation time. In contrast, during the continuous-feeding experiment, the degree of hydrogen utilisation could be kept approximately constant. The highest degrees of reduction and hydrogen utilisation were obtained upon the application of a slag with a basicity of 2.3. The experiment showed that upon the continuous feeding of iron ore, the best conditions for the reduction process using hydrogen could be applied.

Consumption of high amounts of ethanol is a risk factor for development of cardiovascular diseases such as arterial hypertension. The hypertensive state induced by ethanol is a complex multi-factorial event, and oxidative stress is a pathophysiological hallmark of vascular dysfunction associated with ethanol consumption. Increasing levels of reactive oxygen species (ROS) in the vasculature triggers important processes underlying vascular injury, including accumulation of intracellular Ca2+ ions, reduced bioavailability of nitric oxide (NO), activation of mitogen-activated protein kinases (MAPKs), endothelial dysfunction, and loss of the anticontractile effect of perivascular adipose tissue (PVAT). The enzyme nicotinamide adenine dinucleotide phosphate (NADPH) oxidase plays a central role in vascular ROS generation in response to ethanol. Activation of the renin-angiotensin-aldosterone system (RAAS) is an upstream mechanism which contributes to NADPH oxidase stimulation, overproduction of ROS and vascular dysfunction. This review discusses the mechanisms of vascular dysfunction induced by ethanol, detailing the contribution of ROS to these processes. Data examining the association between neuroendocrine changes and vascular oxidative stress induced by ethanol are also reviewed and discussed. These issues are of paramount interest to public health as ethanol contributes to blood pressure elevation in the general population, and it is linked to cardiovascular conditions and diseases.

Mixtures of ethanol and methanol being synthesized from CO2 and green H2 can serve as sustainable base chemicals for a number of chemical processes. Amongst these processes, the catalytically-supported synthesis of CO2-neutral C4 to C10 alcohols is of increasing importance as, e.g., iso-butanol can be used as a drop-in fuel or after dehydration to produce iso-butene as a feedstock for the synthesis of plastics. 2-ethyl-hexanol can be further refined into solvents, tensides, or monomers. In this respect, NiPt alloys on an activated carbon support were found to be active and stable catalysts for the synthesis of iso-butanol following the Guerbet reaction scheme. In this study, two different routes are applied to the synthesis of these NiPt catalysts: a more conventional one based on the impregnation of Ni and Pt salts and an advanced path with a surface redox reaction between elemental Ni on the support and Pt ions in a polar solution. The experimental evaluation showed that the Pt particles from the surface redox reaction being exposed on the Ni particles are more active than those on the impregnated catalysts due to their high surface energy. Their specific space-time yields were 10–20 times higher.