Veterans face difficulties accessing vital health and community services, especially in rural areas. Autonomous vehicles (AVs) can revolutionize transportation by enhancing access, safety and efficiency. Yet, there is limited knowledge about how Veterans perceive AVs. This study fills this gap by assessing Veterans' AV perceptions before and after exposure to an autonomous shuttle (AS). Using a multi-method approach, 23 participants completed pre- and post-AS Autonomous Vehicle User Perception Survey (AVUPS), with 10 participants also taking part in post-AS focus groups. Following exposure to the AS, differences were observed for three out of the four AVUPS domains: an increase in Intention to Use (p < 0.01), a decrease in Perceived Barriers (p < 0.05), and an increase in Total Acceptance (p = 0.01); Well-being remained unchanged (p = 0.81). Feedback from focus groups uncovered six qualitative themes: Perceived Benefits (n=70), Safety (n=66), Shuttle Experience (n=47), AV Adoption (n=44), Experience with AVs (n=17), and Perception Change (n=10). This study underscores AVs' potential to alleviate transportation challenges faced by Veterans, contributing to more inclusive transportation solutions. The research offers insights for future policies and interventions aimed at integrating AV technology into the transportation system, particularly for mobility-vulnerable Veterans in rural and urban settings.

Despite extensive research on autism in children, much less attention has been given to the transition into adulthood. This study aims to address this gap by examining the dietary behaviors of young adults with autism during this critical transition period, highlighting the role of diet in enhancing their readiness for adulthood. Forty-seven participants (mean age 21.0 ± 1.1 years), both male and female, were involved in this study. Participants had various comorbidities, such as mood disorders, attention-deficit/hyperactivity disorder, depression, and anxiety disorders, for which they required medication. Dietary behavior was assessed using the Starting the Conversation: Diet survey, while transition readiness was measured with the Transition Readiness Sur-vey. T-test and regression analysis were utilized to evaluate the data. The results indicated that participants did not follow healthy eating habits, as reflected by the dietary scores (1.08 ± 0.07), and were not adequately prepared for adulthood, as shown by the transition readiness scores (3.19 ± 1.10). A statistically significant and negative correlation was found between dietary pat-terns and transition readiness (r = -0.51, p < 0.001), indicating an adverse relationship: transition readiness ratings decline as diet scores rise. Linear regression analysis revealed that dietary habits accounted for 26.20% of the variation in transition readiness, with the confidence interval for the coefficient of dietary habits being -2.89 to -0.95 (p = 0.002). The negative significant correlation between dietary scores and transition readiness scores shows that diet behavior significantly influences participants’ assessed readiness for transition.

Prediabetes is a significant risk factor for the development of Type 2 diabetes, cardiovascular diseases, chronic kidney disease, and other complications. Early diagnosis of prediabetes, coupled with education on lifestyle changes that support blood glucose management, are crucial for the prevention or delay of type 2 diabetes and related complications. This study aimed to examine the effects of individualized nutrition therapy (INT) combined with continuous glucose monitoring (CGM) on blood glucose control in individuals with prediabetes who are overweight or obesese. Participants (mean age ± SD: 55 ± 6 years; BMI: 31.1 ± 4.1 kg/m²) were randomly assigned to either the treatment group (n = 15) or the control group (n = 15). Both groups received INT and CGM, but the control group was blinded to the CGM data until the end of the study. Participants were followed for 30 days and visited the lab every 10 days for CGM replacement, study measurements, and dietary consultations. The treatment group showed a significant increase in the percent of time in the target blood glucose range (p=0.02) and a significant decrease in mean blood glucose concentration (p&lt;0.05), glucose management indicator (p=0.02), percent coefficient of variation for blood glucose (p=0.01), and the percent time spent in the high or very high blood glucose ranges (p= 0.04). These changes were not statistically significant for the control group. We conclude that adding CGM feedback to INT resulted in better management of blood glucose levels in overweight or obese individuals with prediabetes.

The safety of lithium-ion batteries is critical to the safety of battery electric vehicles (BEVs). The purpose of this work is to develop a method to predict battery thermal runaway in full electric vehicle crash simulation. The thermal-electrical-mechanical coupled finite element analysis is used to model an individual lithium-ion battery cell, a battery module, a battery pack, and a battery electric vehicle with 24 battery modules in a live circuit connection. The lithium-ion battery is modeled using a representative approach, with each battery internal component individually modeled to represent its geometric shape and realistic thermal, mechanical, and electrical properties. A resistance heating solver and Randles circuit model built with generalized voltage source are used to simulate the battery electrical behavior. The thermal simulation of the battery accounts for the heat capacity and thermal conductivity of various cell component materials, as well as heat conduction, radiation, and convection at their interfaces. The mechanical property of battery cell and battery module models is validated using spherical punch tests. The electrical property of the battery cell and battery module models is verified against CircuitLab simulation in an external short circuit test. The simulation result of battery module’s internal resistance agrees with the experimental data and the literature value. The multi-physics coupling phenomenon is demonstrated with a cylindrical compression simulation on the battery module. The multi-physics BEV model with 24 live battery modules is used to simulate the external short-circuit test and the side pole impact test. The simulations run time is less than 24 hours. The results demonstrated the feasibility of using representative battery model and multi-physics analysis to predict battery thermal runaway in full electric vehicle crash analysis.

Rehabilitation from musculoskeletal injuries focuses on reestablishing and monitoring muscle activation patterns to accurately produce force. The aim of this study is to explore the use of a novel low-powered wearable distributed Simultaneous Musculoskeletal Assessment with Real-Time Ultrasound (SMART-US) device to predict force during an isometric squat task. Participants (N=5) performed maximum isometric squats under two medical imaging techniques; clinical musculoskeletal motion mode (m-mode) ultrasound on the dominant vastus lateralis and SMART-US sensors placed on the rectus femoris, vastus lateralis, medial hamstring, and vastus medialis. Ultrasound features were extracted, and a linear ridge regression model was used to predict ground reaction force. The performance of ultrasound features to predict measured force was tested using either the Clinical M-mode, SMART-US sensors on the vastus lateralis (SMART-US: VL), rectus femoris (SMART-US: RF), medial hamstring (SMART-US: MH), and vastus medialis (SMART-US: VMO) or utilized all four SMART-US sensors (Distributed SMART-US). Model training showed that the Clinical M-mode and the Distributed SMART-US model were both significantly different from the SMART-US: VL, SMART-US: MH, SMART-US:RF, and SMART-US:VMO models (p<0.05). Model validation showed that the Distributed SMART-US model had an R² of 0.80 ±0.04 and was significantly different from SMART-US: VL but not from the Clinical M-mode model. In conclusion, a novel wearable distributed SMART-US system can predict ground reaction force using machine learning, demonstrating the feasibility of wearable ultrasound imaging for ground reaction force estimation.

This qualitative research explores negotiation dynamics within procurement, focusing on strategies, challenges, and outcomes in contemporary business environments. Negotiation in procurement plays a crucial role in shaping organizational strategies, supplier relationships, and operational efficiencies. In a globalized economy characterized by rapid technological advancements and market uncertainties, effective negotiation practices are essential for organizations seeking competitive advantage and sustainable growth. Through semi-structured interviews with procurement professionals, supply chain executives, and industry experts, this study examines the nuanced strategies employed in negotiation processes. Thematic analysis of the data reveals key themes including negotiation strategies (e.g., preparation, flexibility), challenges (e.g., price volatility, regulatory constraints), and outcomes (e.g., cost savings, innovation incentives). Relationship management emerges as pivotal, highlighting the importance of trust, transparency, and mutual respect in fostering collaborative supplier partnerships. The study also explores contextual factors (e.g., organizational culture, industry dynamics) and emotional dimensions (e.g., emotional intelligence, interpersonal dynamics) that influence negotiation effectiveness.

Utilizing groundwater offers a promising solution to alleviate water stress in Ethiopia, providing a dependable and sustainable water source, particularly in regions with limited or unreliable surface water availability. However, effective decision-making regarding well drilling and placement is essential to maximize groundwater resource potential, enhancing agricultural productivity, reducing hunger, and bolstering food security in Ethiopia. This study concentrates on the development of two-stage stochastic mixed integer programming (SMIP) models to optimize well placement for sustainable agricultural irrigation, considering uncertain demand scenarios. Additionally, a deterministic mixed integer programming model is formulated for comparison with the two-stage SMIP. Experiments are conducted to explore various demand scenario distributions, revealing that the optimized total cost for the two-stage SMIP generally exceeds that of a deterministic setting, aligning with the two-stage SMIP's focus on long-term benefits. Moreover, slight differences are observed in well layouts under different assumption scenarios. The study also examines the impact of selected parameters, such as fixed construction costs, per-meter drilling costs, and demand scenarios. The out-of-sample performance shows that the stochastic model is more flexible and resilient, with 11% and 4% lower costs than deterministic cases 1 and 3, respectively. This flexibility provides a more robust long-term strategy for well placement and resource allocation in groundwater management.

Supplier collaboration and partnership in procurement are essential elements for enhancing organizational efficiency, innovation, and resilience in today's globalized markets. This qualitative study investigates the dynamics of effective supplier relationships, focusing on trust, communication, innovation, quality, cost savings, and resilience as critical factors. Data were gathered through semi-structured interviews, case studies, and document analysis across diverse industries, highlighting insights from procurement professionals and supplier representatives. Key findings underscore the foundational role of trust and communication in fostering successful collaborations. Establishing transparent, ongoing communication channels facilitates mutual understanding, reduces conflicts, and enhances overall satisfaction. Collaborative innovation emerged as pivotal, enabling organizations to pool resources and expertise for product development and process improvement. Quality and reliability were identified as significant outcomes of close partnerships, particularly in industries with stringent standards such as aerospace and healthcare. Furthermore, the study reveals substantial cost savings and efficiency gains through collaborative efforts in process optimization and waste reduction. Effective risk management practices within these partnerships enhance supply chain resilience, enabling organizations to anticipate and mitigate disruptions proactively. Despite these benefits, challenges such as cultural differences, technological integration, and regulatory compliance require strategic mitigation strategies. In conclusion, organizations can optimize supplier collaborations by prioritizing trust-building, fostering a culture of innovation, and investing in robust relationship management practices. This approach not only enhances operational performance but also positions organizations to navigate market uncertainties and achieve sustainable growth in a competitive landscape.

Implementing ethical procurement standards is increasingly recognized as pivotal for organizations aiming to align their practices with principles of social responsibility and sustainability. This qualitative research explores the experiences, challenges, strategies, and impacts associated with ethical procurement across diverse sectors. Motivations for adopting ethical procurement include enhancing corporate reputation, meeting stakeholder expectations, and complying with regulatory frameworks. However, organizations face significant challenges such as balancing ethical considerations with cost-efficiency pressures, navigating complex regulatory landscapes, and ensuring transparency across global supply chains. Strategies for overcoming these challenges emphasize effective supplier relationship management, leveraging technological innovations for transparency, and investing in supplier capacity-building. The study reveals that ethical procurement practices contribute to organizational resilience by improving risk management, enhancing stakeholder engagement, and fostering innovation in procurement processes. Moreover, ethical procurement supports sustainable development goals by promoting environmental sustainability, supporting social equity through fair labor practices, and contributing to economic development. Future research directions include exploring the impact of emerging technologies on ethical procurement, promoting global collaboration for unified standards, and evaluating the long-term sustainability of ethical procurement initiatives.

This qualitative study explores the challenges and successes in supplier development from the perspectives of procurement managers across diverse industries. Through in-depth interviews, key themes emerged, highlighting the critical role of communication, trust, performance measurement, capacity building, risk management, innovation, regulatory compliance, and technology integration in supplier relationship management. Procurement managers emphasized the importance of clear, continuous communication and trust-building activities to align objectives and foster collaborative partnerships. Performance measurement was crucial for evaluating and improving supplier performance, supported by capacity-building initiatives to enhance supplier capabilities. Risk management strategies focused on identifying and mitigating risks, while compliance efforts aimed to ensure adherence to industry standards. Innovation and technological integration were pivotal for driving efficiency and competitiveness, enabling faster time-to-market and improved product quality. Cultural sensitivity and relationship strengthening emerged as essential for navigating diverse cultural contexts and enhancing partnership effectiveness. Overall, the findings underscored positive outcomes including enhanced quality, cost efficiencies, and increased resilience within supply chains. This research contributes valuable insights into effective supplier management practices, emphasizing the strategic importance of supplier development initiatives for sustainable growth and competitive advantage in today's dynamic business environment.

This qualitative research investigates sustainable procurement practices, focusing on the integration of environmental and social criteria in supplier evaluation processes. The study explores how organizations, ranging from large multinational corporations to smaller enterprises, navigate sustainability challenges and opportunities within their procurement strategies. Data were gathered through semi-structured interviews with procurement professionals and sustainability managers across diverse industries. Themes identified include varying organizational commitments to sustainability, from structured policies and resource allocation in larger firms to reactive approaches constrained by resource limitations in smaller entities. Effective supplier relationship management emerged as crucial, facilitating collaborative partnerships aimed at improving environmental and social performance across supply chains. Motivations for sustainable procurement practices encompass regulatory compliance and responding to consumer demands for eco-friendly products, shaping procurement decisions to enhance market competitiveness and stakeholder satisfaction. Environmental and social criteria integration in supplier evaluations highlighted strategies such as lifecycle assessments and sustainable sourcing practices, aimed at minimizing environmental footprints and promoting ethical labor practices. Benefits included cost savings and enhanced brand reputation, tempered by challenges such as higher procurement costs and supplier resistance. Leadership commitment and organizational culture were identified as critical enablers of sustainable procurement, influencing strategic alignment and fostering a culture of sustainability within organizations. The study underscores the transformative potential of sustainable procurement in achieving organizational resilience and contributing to global sustainability goals.

Agile procurement has emerged as a transformative strategy for organizations striving to maintain competitiveness in a rapidly evolving marketplace. This qualitative research investigates the implementation, benefits, challenges, and outcomes of agile procurement practices in supply chain management. Through semi-structured interviews and case studies across diverse industries, this study explores how agile procurement enhances organizational adaptability and responsiveness. Key findings reveal that agile procurement enables organizations to swiftly adjust strategies in response to market fluctuations and customer demands, fostering increased customer satisfaction and loyalty. The integration of advanced technologies, including AI and blockchain, facilitates real-time data analysis, optimizing procurement processes and enhancing supply chain efficiency. Organizational culture emerges as a critical factor in successful agile procurement, with leadership support and a collaborative environment driving cultural change towards agility and innovation. Despite its benefits, challenges such as resistance to change and the need for significant technology investments are identified, requiring careful change management and strategic alignment. Case studies illustrate the versatility of agile procurement across sectors, showcasing its role in enhancing operational efficiencies, innovation capabilities, and overall supply chain performance. In conclusion, agile procurement offers organizations a strategic framework to navigate complexities and uncertainties effectively, capitalizing on market opportunities while mitigating risks. Embracing agile principles fosters a resilient organizational culture capable of adapting to dynamic market conditions. Future research should focus on further refining agile procurement strategies to address emerging challenges and sustain competitive advantage in the global marketplace.

This paper describes a new generation of computational intelligence founded on the ancient idea of compassion called Artificial Compassion. The creation of Artificial Compassion is the result of two coinciding historical developments. The first is the increasing discoveries of human sciences in new fields like neuroendocrinology and psychoneuroimmunology. This provides the spark for Artificial Compassion. For example, we once thought with certainty that our brain is fixed for life but neuropsychology and a device called the fMRI have shown it is “plastic”. It changes constantly throughout our lives in response to our experiences. Remarkably, we also now know it is changed for the better through positive emotions like compassion, kindness and happiness. So, too, are the immune, endocrine, genetic, cardio and neural systems influenced and changed by our emotional experiences. This new perspective on emotions and plasticity validates much of ancient wisdom in medical systems outside the west. Long held assumptions about emotion are unsuitable for humanity. The second development is ‘machine rub off’. We are in symbiotic relation with our devices today and we are plastic. We are changed by our interactions but many people have computer rage. We need Artificial Compassion to replace computer rage with positive plasticity.

The onset of coronavirus disease 2019 (COVID-19), an infectious disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has sparked unprecedented change. Due to the public health guidelines imposed during the COVID-19 pandemic, there is no longer sufficient street traffic for remaining buskers to generate sufficient revenue, leading a majority of street musicians to pursue remote music production. However, real-time music production is notoriously difficult due to the excessively high latencies that current video call platforms such as Zoom and Google Meet harbor. In this paper, we propose an architecture for a platform with end-to-end, near-lossless audio transmission tailored specifically to online joint music production, called Latent Space. We discuss the usage of a recurrent autoencoder with sequence-aware encoding (RAES) and a 1D convolutional layer for audio compression, which we dub ClefNet, as well as propose a new evaluation metric for naive autoencoders (AEs), MSE-DTW loss, which combines the traditional mean square error (MSE) loss function with dynamic time warping (DTW) to prevent an increase in loss when the target sequence predicted by the AE is strictly a temporal variation of the source sequence. Moreover, we detail the logistics of a live system implementation which uses the Web Audio API to extract raw audio samples in real-time to feed into our client-side model before relaying the traffic using peer-to-peer WebRTC technology. The Latent Space platform can be accessed at https://latent-space.tech, and the code and data can be found under the MIT License at https://github.com/rvignav/ClefNet.

Pain is a natural bioassay for detecting and quantifying biological activities of venoms. The painfulness of stings delivered by ants, wasps, and bees can be easily measured in the field or lab using the stinging insect pain scale that rates the pain intensity from 1 to 4, with 1 being minor pain, and 4 being extreme, debilitating, excruciating pain. The painfulness of stings of 96 species of stinging insects and the lethalities of the venoms of 90 species was determined and utilized for pinpointing future promising directions for investigating venoms having pharmaceutically active principles that could benefit humanity. The findings suggest several under- or unexplored insect venoms worthy of future investigations, including: those that have exceedingly painful venoms, yet with extremely low lethality – tarantula hawk wasps (Pepsis) and velvet ants (Mutillidae); those that have extremely lethal venoms, yet induce very little pain – the ants, Daceton and Tetraponera; and those that have venomous stings and are both painful and lethal – the ants Pogonomyrmex, Paraponera, Myrmecia, Neoponera, and the social wasps Synoeca, Agelaia, and Brachygastra. Taken together, and separately, sting pain and venom lethality point to promising directions for mining of pharmaceutically active components derived from insect venoms.

This review paper investigates the intricate relationship between sexuality and body dysmorphia, emphasizing its profound impact on mental health. Through a critical examination of existing literature, this study illuminates the complex psychological, societal, and cultural dynamics at play within this intersection. Special attention is given to the influence of media representations and societal beauty standards in shaping individual perceptions and experiences. Furthermore, the paper discusses various therapeutic interventions designed to address this interplay, underscoring the necessity for mental health practices that are both sensitive and adaptable to the nuances of these issues. Ultimately, this work enriches the discourse on body image and sexual health, offering critical insights for clinical interventions and highlighting areas for further research.

This qualitative study explores the pivotal role of trust in supplier relationships from the perspectives of procurement professionals. Through in-depth interviews with diverse industry stakeholders, the research examines the multifaceted nature of trust, its antecedents, dynamics, challenges, and strategic implications within modern supply chain management. Trust is conceptualized as a cornerstone that fosters collaborative exchanges, mitigates risks, and enhances organizational resilience in a competitive global marketplace. Findings highlight key factors influencing trust formation, including effective communication, ethical conduct, relationship history, transparency, and cultural alignment. Challenges such as perceived opportunism, communication breakdowns, and regulatory compliance issues are identified as barriers requiring proactive management strategies. Strategies for building and maintaining trust emphasize proactive engagement, transparent decision-making, performance evaluation, mutual benefit alignment, and effective conflict management. The study further explores the impact of trust on procurement decisions, supplier performance, innovation capabilities, cost efficiencies, and long-term sustainability. Practically, the research underscores the importance of integrating trust-building initiatives into supplier relationship management strategies to optimize operational efficiencies, foster innovation, and achieve sustainable growth. By aligning procurement practices with supplier capabilities and market dynamics, organizations can navigate complexities, seize opportunities, and enhance strategic partnerships that drive mutual value creation. Future research directions include exploring emerging trends such as digitalization, sustainability, and ethical considerations in trust-based supply chain interactions.

This qualitative study investigates the influence of organizational culture on procurement practices across multiple industries, aiming to enrich understanding of how cultural dynamics shape decision-making, supplier relationships, and strategic outcomes within procurement departments. Through semi-structured interviews with procurement professionals, organizational leaders, and industry experts, data were gathered to explore the impact of leadership styles, ethical frameworks, industry dynamics, and external influences on procurement strategies. Findings reveal that transformational leadership fosters innovation, strategic alignment, and long-term partnerships in procurement, whereas transactional and autocratic styles may prioritize cost efficiency over broader strategic goals. Ethical cultures within organizations significantly influence supplier selection criteria and procurement decisions, highlighting the importance of integrating ethical standards consistently to mitigate risks and enhance organizational reputation. Industry-specific dynamics necessitate adaptive procurement strategies tailored to technological advancements, regulatory requirements, and market conditions. Effective supplier relationship management practices, emphasizing trust, transparency, and mutual value creation, enhance procurement effectiveness and resilience. Organizational structures, including centralized, decentralized, and hybrid models, play crucial roles in optimizing procurement operations. Learning cultures promoting continuous improvement and knowledge sharing foster innovation and resilience in procurement practices. External factors such as market volatility, regulatory changes, and geopolitical risks underscore the need for adaptive procurement strategies and robust risk management practices. This study contributes to theoretical insights and practical implications for aligning organizational culture with strategic procurement objectives to optimize effectiveness, mitigate risks, and drive sustainable value creation across supply chains.

Supplier diversity initiatives in procurement have emerged as strategic imperatives for organizations aiming to enhance competitiveness and foster socio-economic equity. This research investigates the impact of supplier diversity initiatives across various industries, analyzing implementation strategies, challenges, and outcomes through a mixed-methods approach. Qualitative data, including interviews with procurement professionals and case studies of exemplary organizations, reveal diverse approaches to implementing supplier diversity—from formalized programs with dedicated resources to ad hoc initiatives driven by regulatory compliance or social responsibility goals. Challenges identified include the identification and qualification of diverse suppliers, scalability issues, and internal resistance within procurement teams. Quantitative analysis of survey data highlights positive impacts on organizational performance metrics, such as procurement spend allocation towards diverse suppliers, supplier-driven innovation, and enhanced supply chain resilience. Best practices in successful supplier diversity programs underscore strategic alignment with overall procurement strategies, effective supplier relationship management, and strong leadership commitment. Socio-economic impacts encompass economic inclusion, community engagement, and skills development among diverse supplier networks, contributing to local economic growth and broader social benefits. Despite these benefits, challenges remain in measuring qualitative outcomes and overcoming systemic barriers to implementation. Cultivating an inclusive organizational culture and leveraging leadership support are crucial for sustaining supplier diversity efforts. Continued collaboration and innovation in supplier diversity practices are recommended to maximize benefits and drive meaningful socio-economic impact globally.

This qualitative study explores supplier selection criteria from the perspectives of procurement professionals across diverse industries. Supplier selection is crucial for organizational efficiency and performance, influenced by factors beyond traditional cost considerations. The research aims to uncover nuanced criteria such as quality assurance, supplier reliability, innovation capability, sustainability practices, strategic alignment, relational dynamics, and risk management strategies. These criteria reflect a shift towards holistic evaluation frameworks that integrate economic, social, and environmental dimensions in procurement decision-making. Methodologically, the study employed semi-structured interviews with 30 procurement professionals, ensuring depth and diversity in perspectives. Thematic analysis was used to identify recurring themes and patterns, illuminating the complexities and strategic importance of supplier selection processes. Findings highlight the strategic role of suppliers in driving innovation, enhancing supply chain resilience, and supporting organizational goals. Moreover, the study underscores the significance of sustainable sourcing practices, ethical considerations, and effective supplier relationships in fostering long-term partnerships and mitigating operational risks. Practical implications suggest that organizations should adopt integrated approaches to supplier selection, leveraging data-driven insights and technological advancements to optimize decision-making. By prioritizing strategic alignment, fostering collaborative partnerships, and implementing robust risk management strategies, organizations can navigate uncertainties, capitalize on market opportunities, and sustain competitive advantage.

This qualitative study explores the intricate impact of cultural differences on global procurement practices within multinational supply chains. Cultural dimensions profoundly influence communication dynamics, negotiation strategies, decision-making processes, and supplier relationship management in diverse global contexts. Effective cross-cultural communication is crucial for fostering trust and clarity across different cultural norms, while negotiation strategies vary based on cultural preferences for collaboration or competition. Decision-making processes are shaped by cultural attitudes towards risk tolerance, time orientation, and decision authority, influencing procurement agility and resilience. Strategic implications of cultural diversity include opportunities for innovation and localized adaptation in procurement practices, tempered by challenges such as adaptation costs and regulatory compliance. Emotional intelligence (EI) emerges as pivotal in navigating cultural complexities, enhancing stakeholder engagement, conflict resolution, and collaborative partnerships critical for sustainable procurement practices in multicultural settings. Economic factors, including stability, currency fluctuations, and market volatility, impact procurement strategies and supply chain resilience, necessitating proactive risk management and adaptive approaches. Barriers to growth in global procurement, such as regulatory complexities and geopolitical risks, require strategic planning, stakeholder collaboration, and infrastructural investments for operational continuity. By understanding and addressing cultural influences, multinational corporations can enhance cross-cultural competence, strategic decision-making, and capitalize on global market opportunities. This study contributes insights and recommendations to enhance procurement effectiveness and competitiveness in an interconnected global economy, supporting ongoing efforts to optimize global procurement practices.

This qualitative research explores the integration of sustainability into procurement practices through the perspectives of supply chain practitioners. The study examines key challenges, strategies, and perceived benefits associated with sustainable procurement across diverse industries. Data were collected via semi-structured interviews with purposively sampled participants renowned for their expertise in procurement and sustainability. Thematic analysis revealed that while regulatory compliance, supplier engagement, and cost considerations pose significant challenges, strategies such as collaborative partnerships, embedding sustainability criteria into procurement contracts, and leveraging technology are pivotal in promoting sustainable procurement. Participants highlighted benefits including enhanced brand reputation, improved operational efficiencies, and strengthened stakeholder trust. Leadership commitment and organizational culture emerged as critical drivers of successful sustainable procurement initiatives, influencing employee engagement and organizational resilience. Looking forward, emerging trends such as circular economy principles and the integration of sustainability into corporate strategies are identified as transformative for future procurement practices. The study underscores the strategic importance of sustainability in enhancing organizational resilience, mitigating risks, and creating long-term economic, environmental, and social value. By addressing challenges, leveraging effective strategies, and embracing emerging trends, organizations can position themselves as leaders in sustainable procurement, contributing positively to global sustainability goals and gaining competitive advantage.

This qualitative study explores the multifaceted strategies organizations employ to build resilient supply chains through effective procurement risk management. Conducted over a six-month period in 2024, the research involved semi-structured interviews with 25 industry professionals from sectors including manufacturing, retail, healthcare, and technology, alongside document analysis and case studies. The study identifies four key themes: risk identification and assessment, supplier relationship management, digitalization in risk management, and strategic resilience practices. The findings reveal that organizations face diverse risks, including supplier, supply market, and external environmental risks, necessitating comprehensive risk assessment methodologies. Supplier relationship management emerges as a critical factor in mitigating risks, with practices such as regular audits, collaborative risk management, long-term partnerships, and supplier diversification being crucial. The adoption of digital technologies like predictive analytics, blockchain, advanced analytics, and artificial intelligence enhances risk management capabilities, providing data-driven insights and fostering transparency. Strategic resilience practices, including inventory buffering, flexible sourcing, redundancy, and scenario planning, are essential for maintaining supply chain continuity amidst disruptions. The study underscores the importance of an integrated and proactive approach to procurement risk management that leverages robust assessment, strong supplier relationships, digital tools, and strategic planning. These findings contribute to a deeper understanding of how organizations can effectively manage procurement risks and build resilient supply chains in a dynamic global environment. The insights offer valuable guidance for procurement professionals and organizational leaders in developing resilient and adaptable supply chain strategies to navigate the complexities of today's market.

Strategic procurement practices within global supply chains are crucial for organizations aiming to navigate complex challenges and achieve sustainable competitive advantage. This qualitative research explores how procurement has evolved from a cost-centric function to a strategic enabler of broader organizational objectives, including risk management, sustainability, and innovation. Through semi-structured interviews with procurement managers and supply chain executives across diverse industries, the study investigates key themes such as supplier relationship management, technological integration, and the impact of sustainability considerations on procurement decision-making. Findings indicate that effective procurement strategies, such as strategic sourcing and collaborative supplier partnerships, are pivotal in enhancing supply chain resilience and operational efficiency. Technological advancements, particularly artificial intelligence and big data analytics, are transforming procurement operations by optimizing processes and enhancing decision-making capabilities. However, the study identifies significant challenges, including regulatory complexities, geopolitical uncertainties, and internal resistance to change, which require adaptive approaches to procurement management. Sustainability emerges as a critical driver, with organizations adopting ethical sourcing practices, reducing carbon footprints, and promoting supplier diversity to meet environmental and social responsibility goals. Leadership qualities such as visionary thinking and emotional intelligence are essential for navigating these challenges and driving innovation within procurement practices. Overall, this research contributes to a deeper understanding of strategic procurement's role in organizational strategy and offers practical insights for enhancing procurement effectiveness and resilience in a competitive global market landscape.

This qualitative research explores the role of digital transformation in procurement through insights gathered from interviews with industry leaders. Digital technologies such as Robotic Process Automation (RPA), Big Data Analytics, Artificial Intelligence (AI), and Blockchain are examined for their impact on operational efficiency, strategic procurement management, supplier relationships, and sustainability practices. Findings reveal that these technologies streamline processes, enhance decision-making capabilities, and improve transparency, thereby enabling organizations to achieve greater agility and competitive advantage. Strategic factors including leadership commitment, strategic investments, and digital skills development emerge as crucial for navigating challenges such as organizational resistance, data security, and integration complexities. The study underscores the transformative potential of digital transformation in procurement, emphasizing its role in driving innovation, fostering sustainability, and aligning procurement practices with broader organizational goals. Looking forward, the research suggests that organizations must continue to innovate and adapt to technological advancements to maintain resilience and leadership in a digital economy. By integrating digital strategies effectively, organizations can enhance operational efficiencies, strengthen supplier relationships, and promote ethical business practices, ultimately positioning themselves for sustained success.

This study investigates how organizations adapt their procurement practices in response to supply chain disruptions, aiming to enhance resilience and ensure operational continuity. Through qualitative research involving interviews with procurement professionals and industry experts, the study identifies key adaptive strategies employed by organizations, including supplier diversification, enhanced inventory management, digital transformation, supplier collaboration, and contingency planning. These strategies are explored in depth, highlighting their implementation challenges and the outcomes achieved. Despite facing obstacles such as financial constraints, technological barriers, and supplier resistance, organizations have demonstrated a proactive approach in leveraging these strategies to mitigate risks and improve supply chain resilience. The findings reveal that adaptive procurement strategies have led to significant outcomes, including strengthened supplier relationships, increased operational efficiency, better risk management, and competitive advantage. These outcomes underscore the strategic importance of agility, technological integration, collaborative partnerships, and effective leadership in responding to disruptions and maintaining competitiveness. The study also discusses implications for practice and policy, emphasizing the need for continued investment in technology, collaboration, and resilience-building initiatives across supply chains. Overall, this research contributes to the understanding of how organizations can adapt and innovate in the face of dynamic supply chain challenges, providing insights that can guide future research and inform strategic decision-making in procurement and supply chain management.

This study investigates the adoption of emerging technologies in procurement within supply chain management, focusing on the transformative potential of artificial intelligence (AI) and blockchain. Through a qualitative approach, involving semi-structured interviews with procurement professionals and technology experts, the study explores how these technologies enhance operational efficiency, optimize inventory management, and improve supply chain transparency and trust. AI-driven predictive analytics were found to significantly enhance demand forecasting, inventory optimization, and supplier performance evaluation, fostering data-driven decision-making and proactive risk management. Blockchain technology ensures secure and transparent transactions, facilitating compliance with ethical sourcing standards and reducing risks associated with counterfeit goods. Despite these benefits, organizations face substantial challenges in adopting these technologies, including data security concerns, integration complexities with existing IT infrastructure, and skills shortages in AI and blockchain expertise. Leadership commitment and organizational readiness are identified as crucial enablers for overcoming these barriers and driving successful technology adoption. The study also highlights the strategic importance of supplier relationship management, emphasizing how emerging technologies enhance real-time collaboration, performance insights, and contractual transparency. By addressing these challenges and leveraging technological innovations strategically, organizations can achieve sustainable growth, resilience, and competitive advantage in an increasingly digital and interconnected global economy. The findings contribute to advancing knowledge on procurement innovation and offer valuable insights for organizations seeking to navigate the complexities of technology-driven procurement practices. Future research directions may explore the long-term impact of technology adoption on supply chain dynamics, sustainability initiatives, and organizational performance.

YH-DIE must have continuity . Given the basic algebraic clusters of homogeneous configurations,we can get the basic three equations: \begin{array}{l} {\mathop{\int}\nolimits_{0}\nolimits^{{x}_{i}}{\frac{{G}\left({{x}_{i}\mathrm{,}s}\right)}{{\left({{x}_{i}\mathrm{{-}}{s}}\right)}^{\mathit{\alpha}}}\mathrm{\varphi}\left({s}\right){ds}}\mathrm{{=}}{f}\left({{x}_{i}}\right)}\ ;\ {\frac{\mathrm{\partial}}{\mathrm{\partial}{x}_{i}}\left({\frac{{\mathrm{\partial}}_{{x}_{i}}G}{\sqrt{{1}\mathrm{{+}}{\left|{\mathrm{\nabla}{G}}\right|}^{2}}}}\right)\mathrm{{=}}{0}}\ ;\ {{i}\mathrm{{=}}\mathop{\sum}\limits_{{x}_{i}\mathrm{{=}}{1}}\limits^{\mathrm{\infty}}{\arccos\hspace{0.33em}\mathrm{\varphi}\left({{x}_{i}}\right)}\mathrm{{=}}{f}\left({\fbox{${Yuh}$}}\right)} \end{array} YH-DIE has become a fusion point and access point in the fields of algebraic geometry and partial differential equations, and its mapping on multidimensional algebraic clusters or manifolds is very special. The minimal surface equation is a special case.

Surface temperature influences human health directly and alters the biodiversity and productivity of the environment. While previous research has identified that the composition of urban landscapes influences the physical properties of the environment such as surface temperature, a generalizable and flexible framework is needed that can be used to compare cities across time and space. This study employs the Structure of Urban Landscapes (STURLA) classification combined with remote sensing of New York City’s (NYC) surface temperature. These are then linked using machine learning and statistical modeling to identify how greenspace and the built environment influence urban surface temperature. It was observed that areas with urban units composed of largely the built environment hosted the hottest temperatures while those with vegetation and water were coolest. Likewise, this is reinforced by borough-level spatial differences in both urban structure and heat. Comparison of these relationships over the period between2008 and 2017 identified changes in surface temperature that are likely due to the changes in prevalence in water, lowrise buildings, and pavement across the city. This research reinforces how human alteration of the environment changes ecosystem function and offers units of analysis that can be used for research and urban planning.

Abstract: A two-year study of pearl millet-groundnut cropping systems across two fertilizer levels was conducted at the INRAN/TARNA research station in Maradi, Niger in the Sahelian zone of West Africa. The objective of this study was to identify the best cropping system with and without fertilizer application to optimize pearl millet and groundnut yields, land use efficiency, and economics as measured by value-to-cost ratio. The experiment was conducted with three replications, and ten treatments combination of five pearl millet and groundnut cropping systems (pearl millet and groundnut sole crops, and three pearl millet – groundnut intercrops), and two fertilizer levels. Sole cropping produced the highest pearl millet grain by over 300 kg ha-1 and groundnut pod yields by over 500 kg ha-1, but all the intercropping systems had a LER above 1.0 with land use efficiency increased by 19 to 41%, also intercropping increased diversity, and reduced risk. Fertilizer application increased yields in all cropping systems by 200 to 600 kg ha-1. Government subsidy increased the value-to-cost ratio by 0.5 to 2, 5 units, and was required for economic response for pearl millet sole and intercrops in 2022. The groundnut sole cropping system had the greatest economic response to fertilizer application. Based on the risky environment and multiple end uses needed by producers, the intercrop system M-G: 1:3:1 with fertilizer application is usually the best option to optimize pearl millet and groundnut production.

Within the past decade, the aerospace engineering industry has evolved outside the constraints of using single, large, custom satellites. Due to increased reliability and robustness of commercial off the shelf (COTS) printed circuit board (PCB) components, missions instead have transitioned towards deploying swarms of smaller satellites. This approach significantly decreases the mission cost by reducing custom engineering and deployment expenses. Nanosatellites are able to be quickly developed with a more modular design at lowered risk. The Alpha mission at Cornell Space Systems Studio is fabricated in this manner. However, for the purpose of this mission, only one satellite was initially developed. This manuscript will discuss a systems engineering approach to the development of this satellite. As a disclaimer, this manuscript is written from a systems perspective. Therefore it will follow many subsystems from a wide range of functionalities. The research in this manuscript was kept broad with the hope to contribute to the mission as a system, through a range of development phases including validation and verification of existing methods. The two systems that will be primarily focused on are the Attitude Control System (ACS) of the carrier nanosatellite (cubesat), and the RF communications on the ex-creted picosatellites (chipsat). Milestones achieved in chipsat RF include chipsat to chipsat communication, chipsat to SDR ground station communication, packet creation, error correction, appending a preamble, and filtering the signal. Achievements on the ACS side included controller traceability/verification and validation, software rigidity tests, hardware endurance testing, Kane damper and IMU tuning. These developments matured the technological readiness level (TRL) of our systems in preparation for satellite deployment.

Road vehicles are a large contributor to Nitrogen Oxides (NOx) pollution. The routine road-side monitoring stations, however, may underrepresent the severity of personal exposure in urban areas, because long-term average readings cannot capture the effects of momentary, high peaks of air pollution. While numerical modelling tools historically have been used to propose an improved distribution of monitoring stations, ultra-high resolution Computational Fluid Dynamics models can further assist the relevant stakeholders in understanding the important details of pollutant dispersion and exposure at local level. This study deploys a 10 cm-resolution CFD model to evaluate actual high peaks of personal exposure to NOx from traffic, by tracking the gases emitted from the tailpipe of moving vehicles being dispersed towards the roadside. The investigation shows that a set of four Euro 5-rated diesel vehicles travelling at constant speed may generate momentary road-side concentrations of NOx as high as 1.25 mg/m3, with 25% expected increase for doubling the number of vehicles and approximately 50% reduction when considering Euro 6-rated vehicles. The paper demonstrates how the numerical tool can be used to identify the impact of measures to reduce personal exposure, such as protective urban furniture, as traffic patterns and environmental conditions change.

Solid waste management is a major environmental challenge, especially in developing countries, with increasing amounts of waste glass (WG) and waste plastics (WP) not being recycled. In Ethiopia, managing WG and WP requires innovative recycling techniques. This study examines concrete properties with WG and WP as partial replacements for fine aggregate. Tests were conducted on cement setting time, workability, compressive strength, splitting tensile strength, and flexural strength. Concrete grade C-25, with a compressive strength of 25 MPa, was prepared using an optimum ratio of 14% WG and 6% WP. Mechanical properties were tested at 7 and 28 days of curing. At 20% replacement, workability decreased at water-cement ratios of 0.5 and 0.6 but remained stable at 0.4. Thus, a 0.4 ratio was used. For 10% replacement, compressive strength increased by 12.55% and 6.44% on the 7th and 28th days, respectively. At 20% replacement, compressive strength decreased by 14.35% and 0.73% on the 7th and 28th days, respectively. On the 28th day, splitting tensile strength at optimum replacement was 4.3 MPa, an 8.5% reduction from the control mix. However, flexural strength increased by 19.7%, from 12.46 MPa to 15.52 MPa. Overall, WG and WP improved flexural strength but slightly reduced splitting tensile strength.

Age-related diseases place an intense and growing stress on healthcare systems. Numerous theories of ageing exist. Yet prediction, prevention and treatment limitations of age-related disease persist because we lack a complete aetiological understanding of their origins. Here we propose a new theory that aims to provide a blueprint-type understanding of ageing and disease aetiology, working across multiple scientific disciplines. Supported by specific examples, we demonstrate that the primary driver of much of age-related diseases is the futile triggering of specific molecular pathways in a pathological manner, which we term patho-pathways. Patho-pathways induce pathological cell, tissue and system changes in the form of hyperactivity (undesirable increased and new biological activities that are typical of age related disease). As part of patho-pathways, all wild-type (normal) genes have the potential to contribute to age-related diseases (though specific risk varies and can be formularised). In a domino-style effect, one patho-pathway typically triggers others, resulting in complex, but traceable, cascades. Utility, in terms of changing clinical and scientific practice, is derived from mapping these cascades to create Blueprint Maps that allow identification of biomarkers and therapeutic targets far upstream in the causal chain of events. Finally, our theory provides testable hypotheses concerning predictions of links between otherwise seemingly disparate diseases as well as new interventions into ageing.

Covid-19 has caused infections and deaths worldwide. While research in the field of Data Science has contributed good predictions of positive Covid-19 case numbers, this study's review of literature shows there is little research in the use of variants of the virus in predictions. We set out to define and evaluate novel variant features. We find that features relating to variant trends, thresholds and amino acid substitutions are especially powerful in two tasks. In the first task, predicting Covid-19 case numbers, accuracy improved from 71.53% without variant features to 82.12% with variant features. In the second task, predicting transmission severity of variants between two classes, we created a method to build some variable ensembles through selecting appropriate models that are generated with variant features. The test results showed that our ensembles are more accurate and reliable. One particular ensemble of 14 models correctly classified 90.91% of variants, outperforming other models including the popular Random Forest ensemble. In addition, as the variant features have represented more underlying information about Covid-19 pathophysiology, our ensemble methods use only a few data samples to achieve an accurate prediction. The ensemble of 14 models uses only 50 cases of each variant, an ability that could be exploited for early detection of highly infectious variants. These research findings may benefit public health professionals, policy makers, and the research community in the collective efforts to overcome this disease.

We report two cases of pancytopenia in patients after recovering from a mild COVID-19, now presenting as paroxysmal nocturnal hemoglobinuria (PNH) and aplastic anemia. These cases il-lustrate a common pathway whereby a viral trigger causes clonal expansion of a hematological disorder. Although the association in both cases are temporal, and that COVID-19 may be an in-cidental diagnosis, the growing evidence related to hematological effects of SARS-CoV-2 infec-tion highlights the need for further investigation into the hematological consequences of COVID-19, particularly in the post-pandemic era.

"Hydrogen is an extremely promising energy carrier, poised to become a commercially viable product in the coming years. However, there are significant hurdles that need to be addressed. One such challenge is the high energy consumption during the electrolysis process, which is used to produce hydrogen. Furthermore, the co-production of CO and CO2 during steam hydrocarbon reforming adds to the complexity. Finding innovative solutions to these issues is crucial for the widespread adoption of hydrogen as a clean and efficient energy source." Simultaneously, various industries have the capability to generate hydrogen as a by-product, each with differing levels of purity. For instance, sodium and chlorine production plants have the potential to produce high-purity hydrogen. On the other hand, digester and sewage gas can yield low-purity hydrogen. In both instances, there is an economic incentive to utilize this hydrogen for energy production or to inject it into existing natural gas pipelines A brief estimation of the technical potential of utilizing hydrogen from various sources in Nigeria, specifically for fuel cell usage, has been conducted. Moreover, resource potential visualization maps have been generated to help visualize the availability and distribution of these hydrogen sources throughout the country.

Background. There is limited evidence on the relationship between chronic kidney disease (CKD) and frailty in older people in Vietnam. This study aimed to examine the prevalence of frailty and its impact on mortality in older patients with end-stage renal disease. Method. This is a prospective, observational study at two large Dialysis Centres in Vietnam from November 2020 to June 2021. Consecutive older patients diagnosed with end-stage renal disease and on dialysis were recruited. Participants’ frailty status was defined by the Clinical Frailty Scale (CFS). The study outcome was all-cause mortality at 6th month. Results. A total of 175 participants were recruited (mean age 72.4 years, 58.9% female). Using the cut-point of CFS ≥4, 87.4% of the participants were frail. Mortality at 6th month was 14.9%, 31.9% in participants with CFS ≥7, 12.8% in participants with CFS=6, 7.5% in participants with CFS from 4 to 5, and 4.5% in participants with CFS ≤3 (p=0.001). Cox regression analysis showed that compared to the non-frail participants, the probability of death over 6 months was nearly 2-fold higher in the mildly frail, 3-fold higher in the moderately frail, and 9-fold higher in the severely frail participants. Conclusion. This study demonstrated a very high prevalence of frailty in older patients with end-stage renal disease and dialysis and the significant impact of frailty severity on mortality. Healthcare providers should consider incorporating frailty screening into routine care for older patients with end-stage renal disease and dialysis.

Software governance is a management structure that guides projects in terms of their accountability and responsibility. Prime motivation of this approach is to improve the skillset of the team members through software governance policies and increase the overall success rate of the software projects. The scope of skill development is across the pillars of governance, such as structure, people, and information. Primary focus of this paper is on the skillset development of the project team members through educational policies in software governance. As part of the governance process, educational policies are defined for the skillset development of project team members. The JIRA dataset was used to determine the skillset development of the team members. Machine learning techniques, such as J48, Random Forest, Decision Table, Logistics, and Naïve Bayes, were used in the JIRA dataset. These machine learning techniques were processed using WEKA open-source software. Based on these results, it was concluded that the J48 algorithm can be applied to multiple projects/programs to monitor and track the skill development process. Machine learning model such as J48 is required to use this model at an organizational level. The skillset development of project team members should be aligned with IT governance and educational policies. Overall upskilling and reskilling strategies are provided to demonstrate the impact of skillset development through software governance.

Background:. Knowledge and positive perception of climate change are crucial for public participation in activities that contain climate change. Limited studies, particularly in South Africa have reported on the knowledge and perceptions of climate change by university students. Study Aim: This study aimed to assess the level of knowledge and perceptions of climate change by the science students at the University of South Africa (UNISA). Methods: This was a quantitative cross sectional survey, undertaken among science students using questionnaire emailed to 500 students in the School of Science through Unisa email system. Bivariate logistic regression was used to test the association between socio-demographics, level of knowledge and perceptions of climate change. Results: A total of 420 students participated in the study. They were predominantly male (70.3%), mostly younger than 35 years of age. Most of the respondents were in the 2nd (34.7%) and 3rd (33.8%) year of study. Majority of respondents (97.9%) knew and perceived (93.6%) that climate change was happening. Overall, 93.8% of respondents had an excellent knowledge and basic concepts of climate change. Conclusion: The majority of students were knowledgeable and had positive perceptions about the basic concepts of climate change. However, the year of study was not significantly associated with positive perceptions of climate change. There is need to include climate change modules in South African university curriculum.

Purification of biologically-derived therapeutics is a major cost contributor to the production of this rapidly growing class of pharmaceuticals. Monoclonal antibodies comprise a large percentage of these products therefore new antibody purification tools are needed. Small peptides, as opposed to traditional antibody affinity ligands such as Protein A, may have advantages in stability and production costs. Multiple heptapeptides that demonstrate Fc binding behavior that have been identified from a combinatorial peptide library using M13 Phage Display are presented herein. Seven unique peptide sequences of diverse hydrophobicity and charge were identified. All seven peptides showed strong binding to the four major human IgG isotypes, human IgM, as well as binding to canine, rat, and mouse IgG. These seven peptides were also shown to bind human IgG4 from DMEM cell culture media with 5% FCS and 5 g/L ovalbumin present. These peptides may be useful as surface ligands for antibody detection and purification purposes. Molecular docking and classical molecular dynamics (MD) simulations were conducted to elucidate the mechanisms and energetics for the binding of these peptides to the Fc region. The binding site was found to be located between the two glycan chains inside the Fc fragment. Both hydrogen bonding and hydrophobic interactions were found to be crucial for the binding interactions. Excellent agreement for the binding strength was obtained between experimental results and simulations.

In the early decades of the 19th century, the deaf population in the eastern US and Canada was distributed across a vast area. After the 1817 founding of the American School for the Deaf (ASD) in Hartford, CT and the subsequent establishment of schools for the deaf in New York City (NYSD), Philadelphia, and many other US states, hundreds of deaf students called these schools home for several years. After leaving school, the early American Deaf community faced a challenge: How would the community maintain its social and linguistic ties across a vast geographical area once community members had dispersed to their hometowns? In this paper we analyze the attendance registries of two large gatherings of deaf individuals in Hartford in the years 1850 and 1854. These were among the largest and earliest known gatherings of deaf adults. The demographic data included in these registries open a window onto the evolving American Deaf community of the mid-19th century. Our analyses of the attendees’ school affiliations, ages, and marital status show that the signing community that had taken root among students at schools in Hartford and New York persisted among the adult graduates of those schools in towns across the northeastern US. We compare the places of residence of ASD and NYSD alumni in 1850 and 1854 to their hometowns when they first enrolled at school. Our comparisons suggest the mid-19th-century signing community had become more urban; it was centered to a greater extent in populous cities such as New York, Boston, and Hartford than had been true when the attendees had enrolled in school. We consider how the geography of deafness in the 19th century might inform our understanding of the sources of regional variation in ASL. We also consider how early cross-regional interactions may have inhibited such regional variation.

Background: As long-lived organisms, urban trees often encounter development and redevelopment activities in close proximity during their lifespans. These activities can damage tree roots, often through methods like root severing during trenching or excavation. Methods: In 2017, we simulated trenching damage on mature Quercus virginiana Mill. trees at three different distances from the base (3x, 6x, and 12x the stem diameter). After five years, we revisited these trees to assess root regrowth based on the cut root's cross-sectional area (CSA) and distance from the base. Results: We observed regrowth in all but 38 (6.7%) of the 557 cut roots revisited. The lack of regrowth in some roots was not associated with our original treatments, the CSA of the roots at the time of trenching, or distance between the cut root end and the trunk (minimum P-value = 0.841). On average, the observed CSA of the regrowth was 22.2% of the original root's CSA. Only our original trenching treatments significantly predicted the level of regrowth observed five years after pruning (P-value = 0.024). Discoloration due to root pruning was minimal. Conclusion: In summary, our findings indicate that root systems require many years to recover from trenching damage. Increasing the distance between trenching activities and trees may have a minor effect on root regrowth but primarily helps reduce initial stress on the tree.

Understanding the relationships between land cover/urban structure patterns and air pollutants is key to sustainable urban planning and development. In this study, we employ a mobile monitoring method to collect PM_2.5 and BC data in the city of Philadelphia, PA during the summer of 2019 and apply the Structure of Urban Landscapes (STURLA) methodology to examine relationships between urban structure and atmospheric pollution. We find that, while PM_2.5 and BC vary by STURLA class, many of the differences in pollutant concentrations between classes are not significant. However, we also find that the proportions in which STURLA components are present throughout the urban landscape can be used to predict urban air pollution. Among frequently sampled STURLA classes, gpl hosted the highest PM_2.5 concentrations on average (16.60 _± 4.29 µg/m³), while tgbwp hosted the highest BC concentrations (2.31 _± 1.94 µg/m³). Furthermore, STURLA combined with machine learning modeling was able to correlate PM_2.5 (R²= 0.68, RMSE 2.82 µg/m³) and BC (R² = 0.64, RMSE 0.75 µg/m³) concentrations with the urban landscape and spatially interpolate concentrations where sampling did not take place. These results demonstrate the efficacy of the STURLA methodology in modeling relationships between air pollution and land cover/urban structure patterns.

One of society’s greatest challenges is sequestering vast amounts of carbon to avoid dangerous climate change without driving competition for land and resources. Here we assess the potential of an integrated approach based on enhancement of natural biogeochemical cycles in agro-ecosystems that stimulate carbon capture and storage while increasing resilience and long-term productivity. The method integrates plant photosynthesis in the form of (cover) crops and agroforestry which drives carbon capture. Belowground plant-carbon is efficiently stored as stable soil organic carbon (SOC). Aboveground crop and tree residues are pyrolyzed into biochar, which is applied to the soil reducing carbon release through decomposition. Enhanced weathering of basalt powder worked into the soil further captures and stores carbon, while releasing nutrients and alkalinity. The integrated system is regenerative, through enhanced virtuous cycles that lead to improved plant capture, biomass storage and crop yield, the prerequisites for large-scale carbon sequestration along with food security.

The emission of [O I] lines in the coma of Comet 67P/Churyumov-Gerasimenko during the Rosetta mission have been explained by electron impact dissociation of water rather than the process of photodissociation. This is the direct evidence for the role of electron induced processing has been seen on such a body. Analysis of other emission features is handicapped by a lack of detailed knowledge of electron impact cross sections which highlights the need for a broad range of electron scattering data from the molecular systems detected on the comet. In this paper we present an overview of the needs for electron scattering data relevant for the understanding of observations in coma, the tenuous atmosphere and on the surface of 67P/Churyumov-Gerasimenko during the Rosetta mission. The relevant observations for elucidating the role of electrons come from optical spectra, particle analysis using the ion and electron sensors and mass spectrometry measurements. To model these processes electron impact data should be collated and reviewed in an electron scattering database and an example is given in the BEAMD, which is a part of a larger consortium of Virtual Atomic and Molecular Data Centre – VAMDC.

Purpose Violence against paramedics is a complex – but underreported – problem. Extant research suggests organizational culture may play a role in sustaining cultural norms that downplay the significance and limit reporting. Our objective was to qualitatively explore paramedics’ experience with violence, with particular emphasis on understanding how organizational culture contributes to under-reporting. Approach We surveyed paramedics from a single, large, urban service in Ontario, Canada, asking participants to describe their experiences with violence, including whether – and why or why not – the incidents were reported. Within a constructivist epistemology, we used inductive thematic analysis with successive rounds of coding to identify and then define features of organizational culture that limit reporting. Findings A total of 196 (33% of eligible) paramedics completed the survey. Fully 98% of participants disclosed having experienced some form of violence; however only a minority (40%) reported the incidents to management, or the police (21%). We defined a framework within which a lack of support from management, and consequences for offenders, implicitly positions the ability of paramedics to “brush off” violent encounters as an expected professional competency. Disclosing emotional or psychological distress in response to violent encounters invited questions as to whether the individual is personally suited to paramedic work. Originality While the extant research has indicated that underreporting is a problem, our findings shed light on why – a critical first step in addressing what has been described as a serious public health problem.

Long-term continuous time series of SO2 emissions are considered critical elements of both volcano monitoring and basic research into processes within magmatic systems. One highly successful framework for computing these fluxes involves reconstructing a representative time-averaged SO2 plume from which to estimate the SO2 source flux. Previous methods within this framework have used ancillary wind datasets from reanalysis or numerical weather prediction (NWP) to construct the mean plume and then again as a constrained parameter in the fitting. Additionally, traditional SO2 datasets from ultraviolet (UV) sensors lack altitude information which must be assumed to correctly calibrate the SO2 data and to capture the appropriate NWP wind level which can be a significant source of error. We have made novel modifications to this framework which do not rely on prior knowledge of the winds and therefore do not inherit errors associated with NWP winds. To perform the plume rotation, we modify a rudimentary computer vision algorithm designed for object detection in medical imaging to detect plume-like objects in gridded SO2 data. We then fit a solution to the general time-averaged dispersion of SO2 from a point source. We demonstrate these techniques using SO2 data generated by a newly developed probabilistic layer height and column loading algorithm designed for the Cross-track Infrared Sounder (CrIS), a hyperspectral infrared sensor aboard the Joint Polar Satellite System’s Suomi-NPP and NOAA-20 satellites. This SO2 data source is best suited to flux estimates at high-latitude volcanoes and at low-latitude, but high-altitude volcanoes. Of particular importance, IR SO2 data can fill an important data gap in the UV-based record: estimating SO2 emissions from high-latitude volcanoes through the polar winters when there is insufficient solar backscatter for UV sensors to be used.

Needle abscission in balsam fir has been linked to both cold acclimation and changes in lipid composition. The overall objective of this research is to uncover lipid changes in balsam fir during cold acclimation and link those changes with postharvest abscission. Branches were collected monthly from September to December and assessed for cold tolerance via membrane leakage and chlorophyll fluorescence changes at -5, -15, -25, -35, and -45°C. Lipids were extracted and analyzed using mass spectrometry while postharvest needle abscission was determined gravimetrically. Cold tolerance and needle retention each significantly (P < 0.001) improved throughout autumn in balsam fir. There were concurrent increases in DGDG, PC, PG, PE, and PA throughout autumn and a decrease in MGDG. Those same lipids were strongly related to cold tolerance, though MGDG had the strongest relationship (R2 = 55.0% and 42.7% from membrane injury and chlorophyll fluorescence, respectively). There was a similar, albeit weaker, relationship between MGDG:DGDG and needle retention (R2 = 24.3%). Generally, a decrease in MGDG:DGDG ratio resulted in better cold tolerance and higher needle retention in balsam fir possibly due to increased membrane stability.

Despite great strides in the development of contraceptive technologies, the United States has one of the highest teen pregnancy rates in the world. Many investigators have aimed to examine the relationship between religion and the sexual health behaviors of college students to determine how social factors may influence the use of contraception amongst college students. Thus, we aimed to examine the differences in current contraceptive method and age of first contraceptive usage among sexually active female college students with different religious affiliations and strengths of religiosity. It was hypothesized that there would be no difference in current contraceptive methods among different religious affiliations and strengths of religions, and that there would be a difference in age of first contraceptive usage among different religious affiliations and strengths of religiosity. Two-hundred twenty-four college aged females completed a 20-question survey about sexual health and religious practices. Chi-squared tests were implemented to determine if the frequencies of responses across religious affiliations and strengths of religiosity. Significant differences in the frequency of responses for age of first contraceptive usage were observed across different strengths of religiosity (p=0.016) and for the self-perceived impact of religion on sexual health across different religious affiliations (p=0.033) and strengths of religiosity (p=0.005). All other differences were found not to be statistically significant. It was determined that increased strengths of religiosity resulted in delayed onset of contraceptive us-age and that both different religious affiliations and greater strengths of religiosity lead to different self-perceived impacts of religion on sexual health.

Graphene-based Field-Effect Transistors (FETs) integrated with microstrip patch antennas offer a promising approach for Terahertz signal radiation. In this study, a dual-stage simulation methodology is employed to comprehensively investigate the device’s performance. The initial stage, executed in MATLAB, delves into charge transport dynamics within a FET under asymmetric boundary conditions, employing hydrodynamic equations for electron transport in the graphene channel. Electromagnetic field interactions are modeled via Finite-Difference Time-Domain (FDTD) techniques. The second stage, conducted in COMSOL Multiphysics, focuses on the microstrip patch antenna’s radiative characteristics. Notably, analysis of the S11 curve reveals minimal reflections at the FET’s resonant frequency of 1.34672 THz, indicating efficient impedance matching. Examination of the radiation pattern demonstrates the antenna’s favorable directional properties. This research underscores the potential of graphene-based FETs for Terahertz applications, offering tunable impedance matching and high radiation efficiency for future Terahertz devices.

"Chemical absorption is currently the most advanced technique for capturing carbon dioxide after combustion. A fascinating approach within amine-based technology for post-combustion carbon removal is the utilization of aqueous ammonia as a solvent, leading to a method called chilled ammonia capture. This study aims to enhance the performance of chilled ammonia capture through a thermodynamic assessment, focusing on crystalline configuration.""This study explores the development of an improved second generation chilled ammonia capture process, which involves the formation of solids to enhance capturing efficiency. The simulation software ASPEN is employed to model the expanded UNIQUAC Thermodynamics hypothesis. The modeling encompasses both the conventional carbon ammonia capture process and the more advanced carbon ammonia capture system powered by a crystallizerIn this study, the energy costs associated with implementing different technologies for carbon ammonia capture in typical ultra supercritical power plants are evaluated. The introduction of solid formation in the carbon ammonia capture system has yielded promising results. The findings indicate that the energy required for the carbon ammonia capture system, which utilizes a crystallizer, is approximately 10% lower compared to the overall cost associated with the conventional carbon ammonia capture system. These results highlight the potential for significant energy savings and improved efficiency in carbon capture processes

Temperature-index modeling is used to determine the magnitude of temperature depression in the northern Sawatch Range required to maintain steady-state mass balances of six reconstructed glaciers at their extent during the local Last Glacial Maximum (LLGM), dated at ~21 ka. Assuming no significant differences in precipitation compared to modern values, mean annual temperatures in the region were on average 8.8 +0.5/–0.8 °C cooler than they are today. Allowing for modest increases or decreases in precipitation, required temperature depressions only differ by ± 0.2 °C. Temperature depression in the northern Sawatch Range are consistent, although slightly greater, with those determined in other ranges in Colorado using similar approaches. The estimates presented here are, however, substantially less than those suggested by several downscaled simulations of global LGM climate, that might be due to the need for improved calibration of such downscalings, or the models from which they are derived. Our estimates of LGM temperature depression are considerably greater than that previously determined in the study area and those in two other ranges in Colorado derived using different methodologies, the latter being most likely responsible for the discrepancies.

Computer vision is a rapidly developing field that focuses on highly sophisticated picture analysis, manipulation, and comprehension. Its objective is to analyze what is happening in front of a camera and utilize that understanding to control a computer or robotic system or to present users with fresh visuals that are more enlightening or appealing than the original camera images. Computer vision technologies make it feasible for new user interfaces, augmented reality gaming, biometrics, automobile, photography, movie creation, Web search, and many more applications. This essay seeks to explain how computer vision can be utilized to play blackjack successfully.

There are now a wide variety of global metrics. To find the degree of overlap between these different measures, we employ a principal components analysis (PCA) to 15 indices across 145 countries. Our results demonstrate that the most important underlying dimension highlights that economic development and social progress go hand in hand with state stability. The results are used to produce categorical divisions of the world. The threefold division identifies a world composed of what we describe and map as Rich, Poor and Middle countries. A five-group classification provided a more nuanced categorization described as; The Very Rich, Free and Stable, Affluent and Free, Upper Middle, Lower Middle, and Poor and Not Free.

Cancers of the head and ne¬ck and their treatment can cause disfigurement and loss of functioning, with a profound negative impact on the person’s self-image and psychosocial wellbeing. This can lead to experiences of shame and stigma, which are important targets for psychosocial interventions. Accurate measurement and identification of these problems enables clinicians to offer appropriate interventions and monitor patients’ progress. This study aimed to validate the Canadian version of the Shame and Stigma Scale (SSS) among French and English speaking head and neck cancer patients. Data from 258 patients from two major Canadian hospitals was analysed. The existing 4-factor structure of the SSS was supported, with the following subscales: Shame with Appearance, Sense of Stigma, Regret, and Social/Speech Concerns. The Canadian SSS showed adequate convergent and divergent validity and test-retest reliability. Rasch analysis suggested scale improvement by removing two misfitting item and two items with differential functioning between French and English speaking patients. The final 16-item scale version had adequate fit to the Rasch model. The SSS provides more accurate measures for people with high levels of shame and stigma, and thus has utility in identifying patients with more severe symptoms who may be in need of psychosocial interventions.

The improved understanding of the underlying mechanisms of oxidative damage and/or chronic diseases is of high priority in dietary research. Although the chemical extraction of biofunctional molecules from different fruits and cereals have been studied extensively, the impact of food processing and digestion on bioactivity has not been studied systematically. The aim of this study was to investigate the biofunctional potential of blackcurrant powder incorporated into wholemeal wheat and barley cookies in after simulated in vitro digestion. The incorporation of blackcurrant significantly (p<0.05) increased the total phenolic content (about 60 %), significantly improved oxygen radical absorbance capacity (about 25 %) of the cookie digesta. Additionally cellular antioxidant and anti-proliferative activity (lowest EC₅₀ value 1.02 mg/mL) on human liver cancer cell model, HepG2 was significantly enhanced. Bioactive metabolites of blackcurrant incorporated cookies were significantly supressed the inflammatory cytokine genes IL-1β (about 3-fold), IL-6 (about 0.5-fold) and NF-kB (about 2-fold) regulation and upregulated satiety gene NUCB-2/Nesfatin-1 (about 5-fold) compare with wholemeal wheat and barley control cookies. The exerted synergistic effects of this study suggest that there may be a new and effective option to prevent and control chronic diseases in human.

Injection molding is one of the most common and effective manufacturing processes used to produce plastic products and impacts industries around the world. However, injection molding is a complex process that requires careful consideration of several key control variables. These variables and how they are utilized greatly affect the resulting parts of any molding operation. The bounds of the acceptable values of each control process variable or CPV must be analyzed and delimited to ensure manufacturing success and produce injected molded parts efficiently and effectively. One such method in which the key CPV of an injection molding operation can be delimited is through the development of a process window. Once developed, operating CPV at values inside the boundaries of the window or region will allow for the consistent production of parts that comply with the desired performance measures (PM), promoting a stable manufacturing process. This work proposes a method to experimentally develop process windows and illustrates the methodology with a specific molding operation.

Role identity theory describes the purpose and meaning in life that comes, in part, from occupying social roles. While robustly linked to health and well-being, this may become, however, when an individual is unable to fulfil the perceived requirements of an especially salient role in the way that they believe they should. Amid high rates of mental illness among public safety personnel, we interviewed a purposely selected sample of 21 paramedics from a single service in Ontario, Canada to explore incongruence between an espoused and able-to-enact paramedic role identity. Situated in an interpretivist epistemology, and using successive rounds of thematic analysis, we developed a framework for role identity dissonance wherein chronic, identity-relevant disruptive events cause emotional and psychological distress. While some participants were able to recalibrate their sense of self and understanding of the role, for others, this dissonance was irreconcilable, contributing to disability and lost time from work. In addition to contributing a novel perspective on paramedic mental health and well-being, our work also offers a modest contribution to the theory in using the paramedic context as an example to consider identity disruption through chronic workplace stress.

One characteristic of mammalian species is their capacity to produce and secrete milk from their mammary glands to feed and provide vital nutrients for the growth of their offspring. Even though mammary glands provide the same function in different species, their development, shape, and structure can vary according to their reproductive and ecological adaptations. Reproduction studies are important for cetacean conservation because they provide essential information to assess the dynamics of populations and species, particularly in relation to the management of animals under human care. A vast majority of literature on the female cetacean reproductive anatomy and physiology has focused on the ovaries, which can be used to infer life history characteristics, or genital diseases and anomalies. However, literature regarding the morphology, physiology, and developmental pattern of their mammary glands is scarce, with few anatomical and histological descriptions in species such as baleen whales; and more recently it has been assessed with the use of ultrasound in finless porpoises (Neophocaena asiaeorientalis). The aim of this review is to describe the current diagnostic tools applied in human and veterinary medicine to assess the mammary glands and how marine mammal medicine could benefit from these tools to evaluate the mammary glands in free-ranging and captive cetaceans. With the use of imaging techniques such as B-mode ultrasound, non-invasive studies could be performed to assess the mammary tissues, as what has been done to characterize the morphology of other organs in cetaceans, such as the reproductive tract of Indo-Pacific bottlenose dolphins under human care. By understanding and revising the current diagnostic tools to assess the mammary gland of humans and domestic animals, such as ultrasonography, it might be possible to determine which techniques could be applied by marine mammal veterinarians to enhance the evaluation of the cetacean mammary gland morphology and physiology.

Air pollution is a leading cause of death in the United States, and is associated with adverse health outcomes, including increased vulnerability to coronavirus disease 2019 (COVID-19). The AirBeam2 was used to measure particulate matter with a diameter of 2.5 micrometers or smaller (PM2.5), to investigate differences between indoor and ambient levels at seven private homes in New York during and after the COVID-19 lockdown. Measurements taken in 2020 winter, spring and fall and in fall 2022 showed that 90% of the time, indoor PM2.5 levels exceeded outdoor levels both during and after the COVID-19 lockdown, p = 0.03, and exceeded safety levels. Higher indoor PM2.5 levels attributed to little or no ventilation from cooking and smoke in the kitchen and basements, were significantly greater in fall than in winter. Higher ambient PM2.5 levels were attributed to vehicular traffic at a street-facing sampling site. PM2.5 sources identified in this study may help in devising control strategies to improve indoor air quality (IAQ), and consequently alleviate respiratory health effects. These findings may be used as a basis for in-house modifications including natural ventilation and use of air purifiers to reduce exposures, mitigate future risks, and prevent potential harm to vulnerable residents.

Kratom (Mitragyna speciosa) is a Southeast Asian plant containing various alkaloids which induce pharmacological effects in humans. In Western countries, online vendors sell a variety of different kratom strains which are marketed to have distinct effect profiles. However, as of yet such marketing claims are unsubstantiated, and therefore the current study investigated whether differently colored kratom products can induce unique effects, as self-reported by users. 644 current kratom users were anonymously surveyed to compare the self-reported effects and motivations for using kratom products sold as red, green, and white strains. Most of the survey respondents were customers of the same kratom vendor, the products of which had been assessed for their alkaloid content by an independent laboratory. The survey respondents reported distinct subjective experiences for different kratom strains, in a manner congruent with common marketing descriptions. However, the product analyses revealed no significant cross-strain differences in alkaloid content, suggesting that the reported effect differences might be disproportionally influenced by marketing narratives and anecdotal reports. Future studies should engage a more diverse population and include kratom strains from various vendors. Controlled, blinded experiments could assess whether the reported effect differences stem from a placebo effect or from alternative factors, e.g. minor alkaloids and terpenes.

An emerging picture in cancer biology is that, paradoxically, chemotherapy can actively induce changes that favor cancer progression. These pro-cancer changes can be either inside (intrinsic) or outside (extrinsic) the cancer cells. In this review, we will discuss the extrinsic pro-cancer effect of chemotherapy; that is, the effect of chemotherapy on the non-cancer host cells to promote cancer progression. We will focus on metastasis, and will first discuss recent data from mouse models of breast cancer. Intriguingly, despite reducing the size of primary tumors, chemotherapy changes the tumor microenvironment, resulting in an increased escape of cancer cells into the blood stream. Furthermore, chemotherapry changes the tissue microenvironment at the distant sites, making it more hospitable to cancer cells upon their arrival. We will then discuss the idea and evidence that these devastating pro-metastatic effects of chemotherapy can be explained in the context of stress response. At the end, we will discuss the potential relevance of these mouse data to human breast cancer and their implication on chemotherapy in the clinic.

Balsam fir trees are a specialty agricultural species that are largely used as Christmas trees. Soil or tissue sampling is seldom performed to assess balsam fir nutrition needs, which can contribute to over or under fertilization and subsequent environmental challenges. Remote sensing to determine the normalized difference vegetation index (NDVI) has had strong relationships with nutrition in other plants. This research aimed to determine whether there is a relationship between NDVI and nutrition in balsam fir. A random sample of 45 trees was selected in autumn of 2021 and then another 70 trees selected in spring of 2022. Soil and needle tissue samples were analyzed for N, P, K, Ca, Mg, S, Fe, Zn, Mn, B, and Cu. An uncrewed aerial vehicle equipped with a multispectral camera was flown over the orchard to determine the NDVI for each tree. Nutrition and NDVI were analyzed for correlations through all sampled trees. Separate correlation analyses were repeated for mature trees (greater than 5 years old) and young trees (less than 5 years old). Soil nutrients N, P, K had a significant relationship with NDVI in autumn sampling. Only N was correlated consistently in both autumn and spring, with R2 of 37% and 33% respectively. Relationships were much stronger when only mature trees were considered, increasing to 60% and 51% respectively. NDVI was found to offer predictive power for tissue N that can be useful to producers to help optimize fertilizer input. However, further work is needed to refine these relationships.

The vast majority of autonomous driving systems are limited to applications on roads with clear lane markings and are implemented using commercial grade sensing systems coupled with specialized graphic accelerator hardware. This research reviews an alternative approach for autonomously steering vehicles that eliminates the dependency on road markings and specialized hardware. A combination of machine vision, machine learning and artificial intelligence based on popular pre-trained Convolutional Neural Networks (CNN) and Recurrent Neural Networks (RNN) was used to drive a vehicle along roads lacking lane markings (unmarked roads). The team developed and tested this approach on the ACTor (Autonomous Camus TranspORt) vehicle - an autonomous vehicle development and research platform coupled with a low-cost webcam based sensing system and minimal computational resources. The proposed solution was evaluated on real-world roads and varying environmental conditions. It was found that this solution may be used to successfully navigate unmarked roads autonomously with acceptable road following behavior.

Violence against paramedics has been described as a ‘serious public health problem’ but one that remains ‘vastly underreported’, owing to an organizational culture that stigmatizes reporting – hindering efforts at risk mitigation in addition to creating a gap in research. Leveraging a novel reporting process developed after extensive stakeholder consultation and embedded within the electronic patient care record, our objective was to provide a descriptive profile of violence against paramedics in a single paramedic service in Ontario, Canada. Between February 1, 2021, through January 31, 2023, a total of 374 paramedics in Peel Region (48% of the workforce) generated 941 violence reports, of which 40% documented physical (n=364) or sexual (n=19) assault. The violence was typically perpetrated by patients (78%) and primarily took place at the scene of the 9-1-1 call (47%); however, violent behavior frequently persisted or recurred while in transit to hospital and after arrival. Collectively, mental health, alcohol, or drug use were listed as contributing circumstances in 83% of violence reports. In all, 81 paramedics were physically harmed because of an assault. On average, our data correspond to a paramedic filing a violence report every 18 hours, being physically assaulted every 46 hours, and injured every 9 days.

There is a growing interest in the endocannabinoid system and the gut microbiota. Both areas have been suggested to play a role in endometriosis, however this is yet to be studied comprehensively. The purpose of this narrative review is to identify the gaps in endometriosis research in the context of these two areas. It underscores the limited knowledge regarding the involvement of the endocannabinoid system and gut microbiota in endometriosis. Further research in these areas is essential to unlock the therapeutic potential of cannabis and enhance the understanding of endometriosis pathogenesis.

Plant diseases and pests reduce crop yields, accounting for global crop losses of 30% to 50%. In conventional agricultural production systems, these losses are typically controlled by applying chemical pesticides. However, public pressure is mounting to curtail agrochemical use. In this context, employing beneficial endophytic microorganisms is an increasingly attractive alternative to the use of conventional chemical pesticides in agriculture. A multitude of fungal endophytes are naturally present in plants, producing enzymes, small peptides and secondary metabolites due to their bioactivity, can protect hosts from pathogens, pests and abiotic stresses. The use of beneficial endophytic microorganisms in agriculture is an increasingly attractive alternative to conventional pesticides. The aim of this study was to characterize fungal endophytes isolated from apparently healthy, feral wine grapes in eastern Canada that have grown without agrochemical inputs for decades. Host plants ranged from unknown seedlings to long-lost cultivars not widely propagated since the 1800s. HPLC-MS was used to identify unique endophyte-derived chemical compounds in the host plants, while dual-culture competition assays showed a range in endophytes’ ability to suppress the mycelial growth of Botrytis, which is typically controlled in viticulture with pesticides. Twelve of the most promising fungal endophytes isolated were identified using multilocus sequencing and morphology, while DNA barcoding was employed to identify some of their host vines. These fungal endophyte isolates, which consisted of both known and putative novel strains, belonged to seven genera in six families and five orders of Ascomycota. Exploring the fungal endophytes in these specimens may yield clues to the vines’ survival and lead to the discovery of novel biocontrol agents.

Prebiotic dietary fiber supplements are commonly consumed to help meet fiber recommendations and improve gastrointestinal health by stimulating beneficial bacteria and the production of short-chain fatty acids (SCFAs), molecules beneficial to host health. The objective of this research project was to compare potential prebiotic effects and fermentability of five commonly consumed fibers using an in vitro fermentation system measuring changes in fecal microbiota, total gas production and formation of common SCFAs. Fecal donations were collected from three healthy volunteers. Materials analyzed included: pure beta-glucan, Oatwell (commercially available oat-bran containing 22% oat β-glucan), xylooligosaccharides (XOS), WholeFiber (dried chicory root containing inulin, pectin, and hemi/celluloses), and pure inulin. Oatwell had the highest production of propionate at 12 h (4.76 μmol/mL) compared to inulin, WholeFiber and XOS samples (p<0.03). Oatwell’s effect was similar to those of the pure beta-glucan samples, both samples promoted the highest mean propionate production at 24 h. XOS resulted in a significant increase in the genus Bifidobacterium after 24 h of fermentation (0 h: 0.67 OTUs; 24 h: 5.22 OTUs; p = 0.038). Inulin and WholeFiber increased the beneficial genus Collinsella, consistent with findings in clinical studies. All analyzed compounds were fermentable and promoted the formation of beneficial SCFAs.

Transfer learning has proven to be a valuable technique for deploying machine learning models on edge devices and embedded systems. By leveraging pre-trained models and fine-tuning them on specific tasks, practitioners can effectively adapt existing models to the constraints and requirements of their application. In the process of adapting an existing model, a practitioner may make adjustments to the model architecture, including the input layers, output layers, and intermediate layers. In this study, we examine the effects of these adjustments on the runtime and energy performance of an edge processor performing inferences. Based on our observations, we make recommendations for how to adjust convolutional neural networks during transfer learning to maintain runtime performance. We observe that the Edge TPU is generally more efficient than a CPU at performing inferences on convolutional neural networks, and continues to outperform a CPU as the depth and width of the convolutional network increases. We explore multiple strategies for adjusting the input and output layers of an existing model and demonstrate important performance cliffs for practitioners to consider when modifying a convolutional neural network model.

Objectives: This paper presents a statistical review of modelling simulations for frequency and sensitivity of COVID-19 testing paradigms. Methods: We performed a review of preprints and published articles on PubMed from January 1, 2020 – March 1, 2021 using the search terms “COVID screening testing”, “COVID testing frequency”, “COVID testing frequency screening” and “SARS-CoV-2 testing frequency”.Results: Several authors’ conclusions support the claim that test frequency and test sensitivity both play a role in reducing SARS-CoV-2 transmission. We highlight the interplay between frequency of testing, test sensitivity and the speed at which test results are available in our review. Conclusions: Evidence suggests that sensitivity and frequency of testing both play a part in decreasing transmission of disease. We conclude that, overall, test sensitivity plays less of a role in reducing disease transmission in a population compared to the frequency of testing and how quickly test results are available.

While maintenance dredging of port access channels is often required to maintain navigability, it can result in increased turbidity, sediment plumes, and associated reductions in water quality. Unoccupied aircraft systems (UAS, or drones) are increasingly applied to study water quality due to their high spatial and temporal resolutions. In this study, we investigated the use of drone imagery to monitor turbidity in the Morehead City Harbor, North Carolina, USA, during channel maintenance by hopper dredge. Drone flights were conducted concurrently with in-situ sampling during active dredging and post-dredging. Multispectral drone images were radiometrically calibrated, converted to reflectance and then turbidity using two separate processing methods and a single-band (red; 620nm-700nm) generic turbidity retrieval algorithm, and then compared to in-situ measurements. The method of using average reflectance to retrieve a single turbidity measurement per drone image produced agreeable results when compared to the in-situ measurements (R² = 0.84). This method was then used to generate turbidity maps and extract surface plumes. While this could be considered a limited validation, the results indicate that realistic values can be obtained from drone imagery for low and high turbidity concentrations (1-72 FNU), making drones a viable option for monitoring surface turbidity associated with dredging.

This paper uses resilience as a lens through which to analyse disasters and other major threats to patterns of criminal behaviour. A set of indicators and mathematical models are introduced that aim to quantitatively describe changes in crime levels in comparison to what could otherwise be expected, and what might be expected by way of adaptation and subsequent resumption of those patterns. The validity of the proposed resilience assessment tool is demonstrated using commercial theft data from the COVID-19 pandemic period. A 64 per cent reduction in crime was found in the studied city (China) during an 83-day period, before daily crime levels bounced back to higher than expected values. The proposed resilience indicators are recommended as benchmarking instruments for evaluating and comparing the global impact of COVID-19 policies on crime and public safety.

Introduction: Like other public safety professions, paramedicine has historically been a male-dominated occupation, both in the demography of its workforce and in its organizational culture. Although women are increasingly choosing paramedicine as a career, participation in leadership roles remains limited. Drawing on data from a recent comprehensive mental health survey, we describe the proportion of women in leadership in a single, large, urban paramedic service in Ontario, Canada. Methods: We distributed an in-person, paper-based survey during the fall 2019 - winter 2020 Continuing Medical Education (CME) sessions. Participating paramedics completed a demographic questionnaire alongside a battery of mental health screening tools. We assessed the demography of the workforce and explored differences in employment classification, provider level (e.g., primary vs. advanced care), and participation in formal leadership roles along self-reported gender lines. Results: Out of 607 paramedics attending CME, we received 600 completed surveys, with 11 excluded for missing data, leaving 589 for analysis and a 97% response rate. Women comprised 40% of the active-duty paramedic workforce, with an average of 8 years of experience. Compared to men, women were more than twice as likely to have a university degree (Odds Ratio [OR] 2.02), but almost half as likely to practice at the Advanced Care Paramedic level (OR 0.61), and somewhat less likely to be employed full-time (OR 0.77). Women were nearly 70% less likely to hold a leadership role in the service compared to men (OR 0.36), occupying just 20% of leadership positions. Conclusion: Although paramedicine is witnessing an encouraging shift in the demography of its workforce with greater participation from women, there is still work to be done, particularly in leadership. Future research should focus on identifying and ameliorating barriers to career advancement among women and other historically underrepresented people.

Low-frequency electron paramagnetic resonance (EPR) is used to extract the EPR parameter A-mid and support the approximate X-band value of g-mid for Ba(Co_yZn_1/3-yTa_2/3)O₃. Although cobalt hyperfine structure for the [+/−1/2> state is often unresolved at X-band or S-band, it is resolved in measurements on this compound. This allows for detailed analysis of the molecular orbital for the [+/−1/2> state, which is often the ground state. Moreover, this work shows that the EPR parameters for Co substituted into Zn compounds gives important insight into the properties of zinc binding sites.

This study used 10 replicate pens per treatment in a randomized complete block design and each pen contained 8 steers (initial BW = 305 ± 30.4 kg; n=80 steers/treatment) to determine if a phytogenic feed additive (PFA) with essential oils and plant extracts (PHYTOsolvan 200; DOSTOFARM, Westerstede, Germany) influences measures of growth or growth efficiency during the feedlot receiving phase in auction-derived beef steers. No steers were removed from the study; one steer from the control treatment was treated for respiratory disease. No mortality was noted in the present experiment. No appreciable differences were noted for BW, ADG, DMI, or feed conversion efficiency from d 1 to 29, 29 to 53, or during the cumulative receiving period (P ≥ 0.12). Performance based NEm and NEg were not influenced by dietary treatment (P ≥ 0.79). The ratio of observed-to-expected dietary net energy was not impacted by dietary treatment (P ≥ 0.71). These were healthy, high-growth potential Northern Plains steers. There was minimal morbidity (0.63%) and no mortality noted during the 53 d receiving study. Steers performed well and met growth performance expectations (the ratio of observed-to-expected NEm = 1.00), hence, it was not anticipated that the phytogenic compound would appreciably influence growth or health outcomes under the conditions of this experiment.

Porous coatings on prosthetic implants encourage implant fixation. Enhanced fixation may be achieved using a magneto-active porous coating that can deform elastically in vivo on application of an external magnetic field, straining in-growing bone. Such coating, made of 444 ferritic stainless steel fibres, was previously characterised in terms of its mechanical and cellular responses. In this work, co-cultures of human osteoblasts and endothelial cells were seeded into a novel fibrin-based hydrogel embedded in a 444 ferritic stainless steel fibre network. Albumin was successfully incorporated into fibrin hydrogels improving the specific permeability and the diffusion of fluorescently-tagged dextrans without affecting their Young’s modulus. The beneficial effect of albumin was demonstrated by upregulation of osteogenic and angiogenic gene expression. Furthermore, mineralisation, extracellular matrix production and formation of vessel-like structures were enhanced in albumin-enriched fibrin hydrogels compared to fibrin hydrogels. Collectively, the results indicate that the albumin-enriched fibrin hydrogel is a promising bio-matrix for bone tissue engineering and orthopaedic applications.

There is a potential for synergy effects in utilizing CO2 for both enhanced gas recovery (EGR) and geothermal energy extraction (CO2-plume geothermal, CPG) from natural gas reservoirs. This “combined CO2-EGR–CPG system” has been introduced as a feasible approach that constitutes a CO2 Capture double-Utilization and Storage (CCUUS) system. In this study, we carry out reservoir simulations, using TOUGH2, to evaluate the sensitivity of the natural gas recovery, pressure buildup, and geothermal power generation performance of the combined system to various key reservoir and operational parameters. The reservoir parameters include horizontal permeability, permeability anisotropy, reservoir temperature, and pore-size-distribution index; while the operational parameters include wellbore diameter and ambient surface temperature. Using an example of a natural gas reservoir model, we also investigate the effects of different strategies of transitioning from the CO2-EGR stage to the CPG stage on the energy-recovery performance metrics and on the two-phase fluid-flow regime in the production well. The simulation results show that overlapping the CO2-EGR and CPG stages and having a relatively brief period of CO2 injection but no production (which we call the CO2-plume establishment stage) achieves the best overall energy (natural gas and geothermal) recovery performance. Permeability anisotropy and reservoir temperature are the parameters the natural gas recovery performance of the combined system is most sensitive to. The geothermal power generation performance is most sensitive to the reservoir temperature and the production wellbore diameter. The results of this study pave the way for future CPG-based geothermal power-generation optimization studies. For a CO2-EGR–CPG project, the results can be a guide regarding the required accuracy of the reservoir parameters during exploration and data acquisition.

Lipophilicity can be measured with different methods, such as Shake-Flask or liquid chromatography. HPLC presents the advantage of overcoming solubility issues and therefore extending the range of lipophilicity to high values. A specific HPLC method, called ELogD, had been developed 20 years ago on a C₁₆-amide stationary phase, enhancing hydrophobic and hydrogen bond interactions to mimic octanol-water partition. The emergence of novel stationary phases added to the need for a less complex mobile phase has led to the development of a new HPLC assay called alphaLogD, applicable to neutral and basic compounds at pH 7.4, that combines superficially porous particles, a high number of equilibriums between solutes and stationary phase, and results in a lower number of isocratic methods to determine the logk’_w at a higher throughput. Statistical studies have been run to successfully evaluate the alphaLogD method compared to the Shake-Flask method and to allow this lipophilicity measurement into the so-called Beyond-Rule-of-5-molecules space.

We recently found that in human osteoblasts Homer1 complexes to CaSR and mediates AKT initiation via mTORC2 leading to beneficial effects in osteoblasts including -catenin stabilization and mTORC1 activation (doi: 10.1074/jbc.RA118.006587). Herein we further investigated the relationship between Homer1 and CaSR and demonstrate a link between the protein levels of CaSR and Homer1 in human osteoblasts in primary culture. Thus, when siRNA was used to suppress the CaSR, we observed upregulated Homer1 levels and when siRNA was used to suppress Homer1 we observed downregulated CaSR protein levels using immunofluorescence staining of cultured osteoblasts as well as western blot analyses of cell protein extracts. This finding was confirmed in vivo as the bone cells from osteoblast specific CaSR(-/-) mice showed increased Homer1 expression compared to wild-type. Furthermore, when the commonly used osteosarcoma cell lines MG63 and SAOS-2 were compared to primary osteoblasts, higher levels of Homer1 protein were associated with increased protein levels of the CaSR as well as mTOR and Rictor. CaSR and Homer1 protein were both expressed in osteocytes embedded in the long bones of wild-type mice, and immunofluorescent studies of these cells revealed that Homer1 protein sub-cellular localization was markedly altered in the osteocytes of CaSR(-/-) mice compared to wt. The study identifies additional roles for Homer1 in the control of the protein level and subcellular localization of CaSR in cells of the osteoblast lineage, in addition to its established role of mTORC2 activation downstream of the receptor.

This paper secures the analytical soliton solutions of the perturbed NLSE gives to (1). The existence criteria have been demonstrated and the wave speed of the soliton befall out. To achieve all the results obtained we used the mathematical technique. In view of the results obtained, some new additional one have been reported in left-handed metamaterials.

Gestational Diabetes Mellitus (GDMs) is worldly wide pregnancy complication. Gestational Diabetes can significantly impact the fetus development. However, the effects of high glucose on embryological development post-fertilization are yet to be researched. Danio rerio embryos are great model to study the embryonic development. In this study, the effects on embryological (morphological and genetic) development were examined in the presence of a high glucose environment that mimic the developing fetus in pregnant women with GMD. Fertilized Zebrafish embryos were treated with normal media and high glucose for 5 days from 3 hours post-fertilization(hpf) to 96hpf respectively as control and experimental groups. Morphological changes are recorded with Microscope images. Hatch rate and heart rate are compared between groups in set up time points. RNA-Seq is performed to examine the gene changes in experimental group. Glucose delayed the zebrafish embryo development by slowing the hatch rate about 24 hours. The brain, heart, and tail started showing morphology smaller in the glucose group compared to the control group at 24 hpf. Heart rate is faster in the glucose group compared to the control group on day 2 and 3 with a statistically significant difference. Among zebrafish whole genome, the significantly changed genes are 556 genes up-regulated and 1118 genes down-regulated respectively in high glucose group. The metabolic and Wnt pathways are altered under high glucose condition. These conditions contribute to significant physiological differences that may provide insight on functionality post-embryological development.

This paper focuses on leveraging a cutting-edge 3D state-space model for a holistic eco-friendly assessment in petrochemical operations. - By applying the ecological carrying capacity theory and the three-dimensional state-space model, this research aims to unleash the next frontier of sustainability in the petrochemical industry. - The proposed methodology will enable advanced and comprehensive eco efficiency evaluation in petrochemical operations. - Through the integration of the ecological carrying capacity theory and advanced modeling techniques, this research seeks to revolutionize sustainability assessments in the petrochemical sector. - The utilization of the cutting-edge 3D state-space model will provide a more advanced and accurate understanding of eco-friendly practices in petrochemical operations. This research presents a unique approach distinct from existing literature, which primarily examines business eco efficiency from behavioral motivation and strategic perspectives. In contrast, this paper introduces a novel three-dimensional state-space model to evaluate the ecological efficiency of petrochemical operations. By combining the ecological carrying index and state space, this model represents the ecological impact of petrochemical operations in a three-dimensional geometric space. It considers petrochemical operations as a significant factor exerting pressure on natural resources and the natural environment. In this three-dimensional state-space model, the three axes represent different dimensions of petrochemical operations. The first axis represents the economic status, which quantitatively describes the financial aspects of the operation. The second axis represents the utilization of resources, capturing the extent to which resources are consumed in the operation. The third axis focuses on the impact of the operation on the environment, allowing for a quantitative assessment of its ecological footprint. By incorporating these dimensions, the model aims to provide a comprehensive and quantitative description of the economic activities of petrochemical operations and their interactions with resources and the environment.The primary focus of this research is to apply the three-dimensional state-space model to calculate the ecological carrying capacity of petrochemical operations. By doing so, it aims to verify the feasibility and applicability of the model in determining the ecological efficiency of these operations. The research also aims to provide theoretical tools that can assist operations in making more informed ecological efficiency judgments. By utilizing this model, petrochemical operations will have a quantitative framework to assess and improve their environmental impact, thus fostering more sustainable practices. The findings of this research demonstrate that the implementation of this method can effectively identify issues related to resources, economy, and environment throughout the development of petrochemical operations. By identifying these problems, it provides managers with a solid foundation for making strategic decisions that promote sustainable development. With this valuable information at their disposal, managers can proactively address challenges, optimize resource utilization, and minimize environmental impacts, thus steering the petrochemical operations towards a more sustainable and responsible path.

Viruses are the most common congenital infections and an important cause of fetal malformations, morbidity, and mortality. The effects of these infections, which are transmitted in-utero (transplacentally), during childbirth or in the puerperium depend on the timing of the infections. These vary from miscarriages (usually with infections in very early pregnancy), congenital malformations (where the infections occur during organogenesis) and morbidity (with infections occurring late in pregnancy, during childbirth or after delivery). The most common of these viruses are cytomegalovirus, hepatitis, parvovirus B-19, rubella, varicella and zika. There are currently very few efficacious antiviral agents licensed for use in pregnancy and therefore for most of these infections, prevention by means of immunisation (where there is a vaccine), administration of immunoglobulins to those exposed to the virus to offer passive immunity or appropriate measures to avoid being infected would be options to minimise the infections and their consequences. In this review, we discuss the current understanding of some of the congenital infections and their consequences on both the mother and fetus and their management focusing mainly on prevention.

(1) Background: Parents of children with autism spectrum disorders often experience psychological distress, which can affect the quality of childcare they provide. It is crucial to screen for psychiatric symptoms among these parents. The Core Symptom Index (CSI) is a widely used tool for assessing general symptoms such as depression, anxiety, and somatic symptoms, with demonstrated validity and reliability across various populations. However, there is limited research on the validity and reliability of the CSI in the general Chinese population. This study aimed to investigate the psychometric properties of the Chinese version of the CSI among parents of children with autism spectrum disorders using Confirmatory Factor Analysis (CFA). (2) Methods: A total of 794 Chinese parents raising children with autism participated in this study. All completed the CSI, along with the social inhibition subscale of the Interpersonal Problems Inventory and the Couple Satisfaction Index. Factorial validity was assessed using CFA to determine how well the bifactor three-factor model fits the data. Various structural models were compared using model fit indices. Convergent and discriminant validity were examined by exploring correlations with the social inhibition subscale and the Couple Satisfaction Index. Invariance testing of the CSI was conducted across multiple groups based on gender, age, and education using CFA. The reliability of the CSI was evaluated using McDonald’s omega coefficients. (3) Results: The bifactor model emerged as the best-fitting model for the data, suggesting that the total score of the CSI adequately represents overall psychiatric symptoms. The CSI exhibited significant correlations with the social inhibition subscale (r = 0.41, p &lt; 0.01) and smaller correlation coefficients with the Couple Satisfaction Index (r = -0.16, p &lt; 0.05), indicating both convergent and discriminant validity. Invariant tests supported scalar invariance levels based on gender and age but only partial invariance for education. The Chinese version of the CSI demonstrated high consistency, with McDonald's omega coefficients ranging between 0.86 and 0.95. (4) Conclusions: The bifactor model of the Chinese version of the CSI is validated, making it a suitable tool for measuring depression, anxiety, and somatization symptoms among parents of children with autism spectrum disorders. Further research on other Chinese populations is encouraged.

Vitamin D, unlike the micronutrients, vitamins A, E and K, is largely obtained, not from food, but by the action of solar UV light on its precursor, 7-dehydrocholesterol, in skin. With the decline in UV light intensity in winter, most skin production of vitamin D occurs in summer. Because no defined storage organ or tissue has been found for vitamin D, it has been assumed that adequate vitamin D status in winter can only be maintained by oral supplementation. Skeletal muscle cells have now been shown to incorporate the vitamin D-binding protein (DBP) from blood into the cell cytoplasm where it binds to cytoplasmic actin. This intracellular DBP provides an array of specific binding sites for 25-hydroxyvitamin D (25(OH)D) which diffuses into the cell from the extracellular fluid. When intracellular DBP undergoes proteolytic breakdown, the bound 25(OH)D is then released and diffuses back into blood. This uptake and release of 25(OH)D by muscle, accounts for the very long half-life of this metabolite in the circulation. As 25(OH)D concentration in blood declines in winter, its cycling in and out of muscle cells appears to be upregulated. Parathyroid hormone is the most likely factor enhancing the repeated cycling of 25(OH)D between skeletal muscle and blood. This mechanism appears to have evolved to maintain adequate vitamin D status in winter.

Vitamin D, unlike the micronutrients, vitamins A, E and K, is largely obtained, not from food, but by the action of solar UV light on its precursor, 7-dehydrocholesterol, in skin. With the decline in UV light intensity in winter, most skin production of vitamin D occurs in summer. Because no defined storage organ or tissue has been found for vitamin D, it has been assumed that adequate vitamin D status in winter can only be maintained by oral supplementation. Skeletal muscle cells have now been shown to incorporate the vitamin D-binding protein (DBP) from blood into the cell cytoplasm where it binds to cytoplasmic actin. This intracellular DBP provides an array of specific binding sites for 25-hydroxyvitamin D (25(OH)D) which diffuses into the cell from the extracellular fluid. When intracellular DBP undergoes proteolytic breakdown, the bound 25(OH)D is then released and diffuses back into blood. This uptake and release of 25(OH)D by muscle, accounts for the very long half-life of this metabolite in the circulation. As 25(OH)D concentration in blood declines in winter, its cycling in and out of muscle cells appears to be upregulated. Parathyroid hormone is the most likely factor enhancing the repeated cycling of 25(OH)D between skeletal muscle and blood. This mechanism appears to have evolved to maintain adequate vitamin D status in winter.

Given the imperative of security, sustainability of supply, strategic considerations, and energy independence, there is a widely acknowledged need to persist in utilizing coal as the primary fuel for electricity generation in power plants. However, in order to combat the rising levels of CO2 in the atmosphere, it is crucial to advance the development of carbon capture and storage (CCS) technologies that enable fossil fuel power plants to achieve zero emissions. These technologies play a pivotal role in capturing and effectively storing CO2, thus ensuring that coal-based power generation can continue while significantly reducing its environmental impact. By implementing CCS solutions, fossil fuel power plants can transition towards a more sustainable and environmentally friendly energy future.The utilization of chemical solvents for CO2 absorption, coupled with long-term storage, presents an intriguing and commercially viable technology for CO2 capture. However, the significant energy demands of the solvent regeneration process necessitate optimization, particularly in large-scale power plants. While the current cost of CO2 capture stands at approximately #55,000.00(Naira) per ton of CO2, the objective is to reduce this cost to below #25,000.00(Naira) per ton of CO2. This reduction in cost is essential to ensure the economic feasibility and widespread adoption of CO2 capture technologies in power generation.This research paper explores various approaches to address the energy demands associated with amine scrubbing integration in a commercial power plant. It provides a comprehensive analysis, both technically and economically, of the performance of these different approaches. While some of the proposed schemes may result in minor efficiency reductions, the key objective is to calculate the specific cost per ton of CO2 captured. The primary focus is on identifying the most suitable configuration to implement large-scale, cost-effective schemes that can serve as a foundation for CO2 capture demonstration projects. By determining the optimal configuration, this research aims to pave the way for the successful implementation of efficient and economically viable CO2 capture technologies in the power generation sector.

Phylogenies depict shared evolutionary patterns and structures on a tree topology, enabling the identification of hierarchical and historical relationships. Recent analyses indicate that phylogenetic signals extend beyond the primary structure of protein or DNA, and various aspects of codon usage biases are phylogenetically conserved. Several functional biases exist within genes, including the number of codons that are used, the position of the codons, and the overall nucleotide composition of the genome. Codon usage biases can significantly affect transcription and translational efficiencies, leading to differential gene expression. Although systematic codon usage biases originate from the overall GC content of a species, ramp sequences, codon aversion, codon pairing, and tRNA competition also significantly affect gene expression and are phylogenetically conserved. We review recent advances in analyzing codon usage biases and their implications in phylogenomics. We first outline common phylogenomic techniques. Next, we identify several codon usage biases and their effects on secondary structure, gene expression, and implications in phylogenetics. Finally, we suggest how codon usage biases can be included in phylogenomics. By incorporating various codon usage biases in common phylogenomic algorithms, we propose that we can significantly improve tree inference. Since codon usage biases have significant biological implications, they should be considered in conjunction with other phylogenetic algorithms.

Violence against paramedics is widely recognized as a serious, but underreported, problem. While injurious physical attacks on paramedics are generally reported, non-physical violence is less likely to be documented. Verbal abuse can be very distressing, particularly if the harassment targets personal or cultural identities, such as race, ethnicity, gender, or sexual orientation. Leveraging a novel, point-of-event reporting process, our objective was to estimate the prevalence of harassment on identity grounds against paramedics in a single paramedic service in Ontario, Canada, and assess its potentially differential impact on emotional distress. In an analysis of 502 reports filed between February 1, 2021, through February 28, 2022, two paramedic-supervisors independently coded the free-text narrative descriptions of violent encounters for themes suggestive of sexism, racism, and homophobia. We achieved high interrater agreement across the dimensions (k=0.73-0.83), and after resolving discrepant cases, we found that 1 in 4 violent reports documented abuse on at least one of the identity grounds. In these cases, paramedics were 60% more likely to indicate being emotionally distressed than for other forms of violence. Our findings offer unique insight into the type of vitriol paramedics experience in the course of their work and its potential for psychological harm.

Background: Blood flow restriction training (BFRT) uses occlusion during low-intensity resistance training (&lt;50% of repetition maximum, 1RM) to reduce arterial blood flow and venous return, imposing greater metabolic stress but similar muscular hypertrophy and strength gains as high-intensity resistance training (HIRT). However, no study, to date, has incorporated BFRT in a collegiate strength and conditioning setting to assess ecological validity. We aimed to investigate the effects of adding 6-weeks of accessory BFRT or HIRT to NCAA Division III soccer players prescribed resistance training regimen on muscle strength and hypertrophy. Methods: Male and female (n=17) athletes were randomly assigned to complete biceps curls 2x/week under BFRT or control (HIRT), following the regularly scheduled strength training. Bicep strength (1RM) and circumference (BC) were assessed at weeks 0, 3, and 6. Results: In men, no significant interaction between time and condition was observed for BC (p=0.861), though condition (BFRT vs Control, p=0.025) and time (p=0.024) were significant. For 1RM, there was no significant interaction between time and condition (BFRT vs HIRT, p=0.067) or of condition (p=0.598), but there was a significant effect of time (p=0.004). In women, there was no significant interaction between time and condition (p=0.765) or of condition (p=0.971) on BC, but time was significant (p=0.045). For 1RM, there was no significant interaction between time and condition (p=0.227) or of condition (p=0.741), but time was (p=0.018). Conclusion: BFRT induced similar increases in muscle strength and hypertrophy as HIRT in soccer players, suggesting that BFRT could be incorporated into collegiate athlete training.

Overweight and Obesity (Ow/Ob) is a risk factor for developing cardiometabolic disease, and metabolic dysfunction. Dietary interventions, such as caloric restriction (CR), have been explored but little is known about the acute effects of CR and often such diets are not standardized. PURPOSE: To assess the impact of a standardized 3-day CR diet (~590kcal/d) on cardiometabolic health and fat metabolism in Ow/Ob individuals. METHODS: Fifteen Ow/Ob men and women were assessed pre-post 3-day CR using standardized diet; specifically, body weight/composition (% body fat, visceral fat score (Vfs), waist-hip circumferences, blood pressure and vascular stiffness, resting energy expenditure (REE), substrate utilization (respiratory quotient, RQ), and blood glucose/lipid profile. RESULTS: CR induced changes in body weight (93.1±15.2 to 90.67±14.4 kg, p&lt;0.001, d=1.9), body mass index (32.9±4.0 to 32.0±3.7 kg/m2, p&lt;0.001, d=1.4), body fat (37.2±7.5 to 35.8±7.5%, p=0.002, d=1.1) and Vfs (13.1±4.5 to 12.2±3.9 a.u., p=0.002, d=1.1), but not body water (46.3±3.6 to 46.0±3.6%, p=0.29, d=0.3). CR had no effect on peripheral (86±5 to 89±5 mmHg, p=0.23, d=0.3) or central mean arterial pressure (86±5 to 87±6 mmHg, p=0.44, d=0.2), but lowered augmentation index (29.8±17.5 to 21.5±14.5%, p=0.05, d=0.6). Blood glucose (86±7 to 84±11 mg/dl, p=0.33, d=0.3) and blood lipids (total cholesterol (196±49 to 203±54 mg/dl, p=0.16, d=0.4) and TC/HDL (4.9±2.4 to 6.1±4.7, p=0.13, d=0.4)) were unchanged. RQ decreased with CR (0.84±0.01 to 0.76±0.00, p&lt;0.001, d=1.9), though REE was unchanged (1718±274 to 1722±317 kcal/d, p=0.83, d=0.1). CONCLUSION: The 3-day CR significantly improved body weight and composition and fat metabolism, with minimal cardiovascular effects.

Surgical simulators are crucial in early craniofacial and plastic surgical training, necessitating synthetic materials that accurately replicate tissue properties. Recent critiques of our lab’s currently deployed silicone surrogate have highlighted numerous areas for improvement. To further refine our models, our group's objective is to find a composition of materials that is closest in fidelity to native oral mucosa during surgical rehearsal by expert craniofacial surgeons. Fifteen platinum silicone-based surrogate samples were constructed with variable hardness and slacker percentages. These samples underwent evaluation of tactile sensation, hardness, needle puncture, cut resistance, suture retention, defect repair, and tensile elasticity. Expert craniofacial surgeon evaluators provided focused qualitative feedback on selected top-performing samples for further assessment and statistical comparisons. Evaluation revealed surrogate characteristics with satisfactory to good performance. Sample 977 exhibited the highest performance, and comparison with the original surrogate (sample 810) demonstrated significant improvements in critical areas, emphasizing the efficacy of the refined composition. The study identified a silicone composition that directly addresses the feedback received by our team’s original silicone surrogate. The study underscores the delicate balance between biofidelity and practicality in surgical simulation. The need for ongoing refinement in surrogate materials is evident to optimize training experiences for early surgical learners.

Surgical simulators are crucial in early craniofacial and plastic surgical training, necessitating synthetic materials that accurately replicate tissue properties. Recent critiques of our lab’s currently deployed silicone surrogate have highlighted numerous areas for improvement. To further refine our models, our group's objective is to find a composition of materials that is closest in fidelity to native oral mucosa during surgical rehearsal by expert craniofacial surgeons. Fifteen platinum silicone-based surrogate samples were constructed with variable hardness and slacker percentages. These samples underwent evaluation of tactile sensation, hardness, needle puncture, cut resistance, suture retention, defect repair, and tensile elasticity. Expert craniofacial surgeon evaluators provided focused qualitative feedback on selected top-performing samples for further assessment and statistical comparisons. Evaluation revealed surrogate characteristics with satisfactory to good performance. Sample 977 exhibited the highest performance, and comparison with the original surrogate (sample 810) demonstrated significant improvements in critical areas, emphasizing the efficacy of the refined composition. The study identified a silicone composition that directly addresses the feedback received by our team’s original silicone surrogate. The study underscores the delicate balance between biofidelity and practicality in surgical simulation. The need for ongoing refinement in surrogate materials is evident to optimize training experiences for early surgical learners.

Adenine and thymine homopolymer strings of at least 8 nucleotides (AT 8+mers) were characterized in Salmonella entericasubspecies I. The motif differed between cother taxonomic classes but not between Salmonella enterica serovars. The motif in plasmids was associated with serovar. Approximately 12.3% of the S. enterica motif loci had mutations. Mutability of AT 8+mers suggests that genomes undergo frequent repair to maintain optimal gene content, and that the motif facilitates self-recognition; in addition, serovar diversity is associated with plasmid content. A theory that genome regeneration accounts for both persistence of predominant Salmonella serovars and serovar diversity provides a new framework for investigating root causes of foodborne illness.

The UK food industry faces significant challenges to remain sustainable. With major challenges such as Brexit on the horizon, companies can no longer rely on a low labour cost workforce to maintain low production costs and achieve economic sustainability. Smart Systems (SS) is being seen as an approach towards achieving significant improvements in both economic and environmental sustainability. However, there is little evidence to indicate whether UK food companies are prepared for the implementation of such systems. The purpose of this research is to explore the applicability of Smart Systems in UK food manufacturing companies and, to identify the key priority areas and improvement levers for the implementation of such systems. A triangulated primary research approach is adopted and includes a questionnaire, follow up interviews and visits to thirty-two food manufacturing companies in the UK. The questionnaire and interviews are guided by the development of a unique measuring instrument created by the authors that is focusses upon SS technologies and systems. This paper makes an original contribution in that it is one of few academic studies to explore the implementation of SS in the industry and, provides a new perspective on the key drivers and inhibitors around its implementation. Findings suggest that the current turbulence in the industry could be bringing food companies closer to the adoption of such systems, hence it is a good time to define and develop the optimum SS implementation strategy.

There is growing recognition in research and policy of a mental health crisis among Canada’s paramedics but despite this, epidemiological surveillance of the problem is in its infancy. Just weeks before the emergence of the COVID-19 pandemic, we surveyed paramedics from a single, large, urban paramedic service in Ontario, Canada to assess for symptom clusters consistent with Post-Traumatic Stress Disorder (PTSD), major depressive disorder, and generalized anxiety disorder and to identify potential risk factors for each. In total, we received 589 completed surveys (a 97% completion rate) and found that 11% screened positive for PTSD, 15% for depression, and 15% for anxiety, with 1 in 4 active-duty paramedics screening positive for any of the three as recently as February 2020. In adjusted analyses, the risk of a positive screen varied as a function of employment classification, gender, self-reported resilience, and previous experience as a member of the service’s peer support team. Our findings support the position that paramedics screen positive for mental disorders at high rates – a problem likely to have worsened since the onset of the COVID-19 pandemic. We echo the calls of researchers and policymakers for urgent action to support paramedic mental health in Canada.

Humanity is currently facing several global problems, such as global warming, air pollution, water pollution, deforestation, desertification and land degradation, which are connected to the consequences of negative human activity. One of the possible and effective institutional tools for environmental protection is the environmental education of the general population. It is a relatively well-known and used environmental protection policy tool that governments of all developed countries have in their instrument mix. This qualitative analysis assigned itself the task of investigating whether the ability of environmental education can be affected by certain neuropsychological diseases in addition to thinking about the psychology of environmental education at large. In order to fulfill this main task, the authors asked themselves the following research questions: 1st - Is pedagogical psychology identical and also applicable in the case of environmental education? And 2nd - What effect do some neuropsychological disorders have on the ability of environmental education? Based on the study, analysis, selection and comparison of current professional scientific works obtained from the research activities of current researches on this topic, it is possible to accept the premise that the psychology of environmental education is basically the same as the general psychology of education and that neuropsychological diseases do indeed affect the ability of environmental education similarly to scholarly education.

Background: Cervical laminoplasty is a useful for treatment of cervical myelopathy. However, this procedure has limitations for kyphotic cervical alignments. We used the finite element (FE) analysis and investigated the biomechanical changes in an intact and laminoplasty models with lordosis, straight, and kyphosis cervical alignments. Methods: A three-dimensional FE model of the cervical spine (C2-C7) with ligaments was created from computed tomography. The model was modified with the following cobb angles and the C3-C6 laminoplasty was conducted; a) laminoplasty-lordotic model (LM-L; C2-C7 angle: -10°), b) laminoplasty-straight model (LM-S; C2-C7 angle: 0°), and c) laminoplasty-kyphotic model (LM-K; C2-C7 angle: 10°). A pure moment with a compressive follower load of 100N to represent the weight of the head/cranium and cervical muscle stabilization was applied to these models. The range of motion (ROM), annular stress, nucleus stress and facet forces were analyzed. Results: ROM of LM-K increased when compared to the other models except for flexion. The LM-K had the highest mobility with 49% increase in ROM observed under extension, compared to the intact model. In all motion except for flexion, LM-L models’ ROM decreased by more than 10%, and LM-S and LM-K models’ ROM increased by more than 10% at C2-C7 compared to the intact model. The annular stresses and nucleus stresses in LM-K were higher compared to the other models. The maximum increase in annular stresses was about 194% in LM-K compared to the intact model, observed at the C3-C4 segment. The facet contact forces were lowest in the LM-K, compared to the other models.Conclusions: Patients with a cervical kyphosis alignment are at a disadvantage of increased kyphosis compared to cases with lordosis or straight alignment and should be treated with caution.

Background: Even though a number of studies have verified the positive effect of physical activity (PA) on self-related health (SRH) no previous research has examined this association among pediatric patients with Type 1 diabetes mellitus (T1DM). Objective: The purpose of this study was to investigate the association between regular physical activity (PA) and self-rated health (SRH) in pediatric patients with Type 1 diabetes mellitus (T1DM) who lacked diabetes care. Methods: We conducted a retrospective study among pediatric patients with T1DM who lacked diabetes care and were enrolled in a diabetes education program between January 2011 to January 2015 at the endocrinology clinic of Seoul National University Children’s Hospital in South Korea. The eligible participants for this study were 37 pediatric patients with T1DM aged 9 to 17 years. PA was divided into regular PA and muscle strength exercise to analyze the relationship with SRH using binomial logistic regression analysis. Results: The results showed SRH of pediatric patients with T1DM who did not engage in regular PA was significantly lower than those who did (OR in regular PA = .199 [95% CI: .040, .995]; OR in regular muscle strength exercise = .097 [95% CI: .023, .825]). Conclusions: In conclusion, regular PA and muscle strength exercise in pediatric patients with T1DM who lacked diabetes care were effective in improving their SRH. A systematic plan is required to enhance regular PA for pediatric patients with T1DM.