In this work, a numerical study on the loop-terminated Mach-Zehnder interferometer (LT-MZI) structure for CO2 gas sensing application is carried out via the finite element method. The sensing arm is covered with a polyhexamethylene biguanide (PHMB) polymer which is highly receptive to CO2 gas. The refractive index of the host material decreases due to the absorption of the CO2 gas resulting in a shift in the interference pattern of the LT-MZI structure. As a result, a redshift in the wavelength is observed in the transmission spectrum of the device. The sensitivity of the device is estimated at 7.63 pm/ppm, 34.46 pm/ppm and 74.78 pm/ppm for the sensing arm length of 5 µm, 10 µm, and 15 µm, respectively. The sensitivity can be further enhanced, however at the cost of the bigger footprint of the device. Utilizing the innovative sensor design, a comprehensive range of CO2 gas concentrations spanning from 0 to 524 ppm is successfully detected. This compact and highly sensitive device serves as a vital tool for monitoring indoor CO2 levels, fostering a healthier breathing environment for all occupants.

Photonic sensors are innovative devices that leverage the principles of light-matter interaction to enable precise and efficient detection of various physical parameters. These sensors operate by exploiting the interaction between photons, the fundamental particles of light, and matter. The light propagates through an optical waveguide, and a portion of the electromagnetic field extends beyond the waveguide surface, forming the evanescent field. This evanescent field interacts with the surrounding medium, allowing for highly sensitive detection of changes in the refractive index or properties of nearby substances. The underlying concept involves the modulation of light properties, such as intensity, wavelength, or phase, when it interacts with a target substance or undergoes changes in the surrounding environment. The advancements in photonic sensor technology have paved the way for enhanced sensitivity, selectivity, and miniaturization, making them invaluable tools in diverse industries. The ability to harness light-matter interactions for sensing purposes not only facilitates highly sensitive measurements but also allows for non-intrusive and remote monitoring, contributing to the evolution of smart and connected systems. In this overview, the material platforms and waveguide structures are explored that can make highly sensitive photonic devices applied to gas and biosensing applications.

Gas sensing is crucial for detecting hazardous gases in industrial environments, ensuring safety and preventing accidents. Additionally, it plays a vital role in environmental monitoring and control, helping to mitigate pollution and protect public health. Integrated photonic gas sensors are important due to their high sensitivity, rapid response time, and compact size, enabling precise recognition of gas concentrations in real-time. These sensors leverage photonic technologies, such as waveguides and resonators, to enhance performance over traditional gas sensors. Advancements in materials and fabrication techniques could further improve their efficiency, making them invaluable for environmental monitoring, industrial safety, and healthcare diagnostics. In this review, we delved into photonic gas sensors that operate based on the principles of evanescent field absorption (EFA) and wavelength interrogation methods. These advanced sensing mechanisms allow for highly sensitive and selective gas detection, leveraging the interplay of light with gas molecules to produce precise measurements.

Currently, old-style personal medicare techniques rely mostly on traditional methods, such as cumbersome tools and complicated processes, which can be time-consuming and inconvenient in some circumstances. Furthermore, such old methods need the use of heavy equipment, blood draws, and traditional bench-top testing procedures. Invasive ways of acquiring test samples can potentially cause patients discomfort and anguish. Wearable sensors, on the other hand, may be attached to numerous body areas to capture diverse biochemical and physiological characteristics as a developing analytical tool. Physical, chemical, and biological data transferred via the skin is used to monitor health in various circumstances. Wearable sensors can assess the aberrant conditions of the physical or chemical components of the human body in real-time, exposing the body state in time, thanks to unintrusive sampling and high accuracy. Most commercially available wearable gadgets are mechanically hard components attached to bands and worn on the wrist, with form factors ultimately constrained by the size and weight of the batteries required for the power supply. Wearable gadgets with “skin-like” qualities are a new type of automation that is only starting to make its way out of research labs and into pre-commercial prototypes. In this paper, we studied the recent advancement in battery-powered wearable sensors established on optical phenomena and skin-like battery-free sensors which brings a breakthrough in wearable sensing automation.

In this review, several cost-effective thin-film coating methods which include dip-coating, spin-coating, spray-coating, blade-coating, and roll-coating are presented. Each method has its set of advantages and disadvantages depending on the type of application. Not all of them are appropriate for large-scale production due to their certain limitations. That is why the coating method should be selected based on the type and size of substrate including the resolution of the required thin-films. The sol-gel method offers several benefits, such as simplicity in fabrication, excellent film uniformity, the capacity to cover surfaces of any size and over vast areas, and a low processing temperature. Nevertheless, these coating methods are somewhat economical and well managed in low-budget laboratories. Moreover, the produced thin-films are homogeneous and have low-surface roughness. Furthermore, some other thin-film deposition methods such as physical vapor deposition (PVD) and chemical vapor deposition (CVD) are also discussed. Since CVD is not restricted to line-of-sight deposition, a characteristic shared by sputtering, evaporation, and other PVD processes, many manufacturing methods favor it. However, these techniques require sophisticated equipment and cleanroom facility. We aim to provide the pros and cons of thin-film coating methods and let the readers decide the suitable technique for their specific application.

We introduce the notion of generalized contraction on dualistic partial metric spaces. A fixed point theorem for mappings satisfying above mentioned contraction is obtained. Some consequences of our result are obtained. We construct an example to demonstrate the effectiveness of our result among the corresponding results in partial metric spaces. Our results provide substantial generalizations and improvements of several well known results existing in the comparable literature. We discuss an application of our fixed point results to show the existence of solution of functional equations.

Optical switching is an essential part of photonic integrated circuits and the focus of research at the moment. In this research, an optical switch design working on the phenomenon of the guided-mode resonances in 3D photonic crystals-based structure is reported. The optical-switching mechanism is studied in a dielectric slab-waveguide-based structure operating in the near-infrared range in a telecom window of 1.55 µm. The mechanism is investigated by interference of two signals, i.e., the data signal and the control signal. The data signal is coupled into the optical structure and filtered utilizing guided-mode resonance, whereas, the control signal is index guided in the optical structure. The amplification or de-amplification of the data signal is controlled by tuning the spectral properties of the optical sources and structural parameters of the device. The parameters are optimized first using a single-cell model with periodic boundary conditions and later in a finite 3D-FDTD model of the device. The numerical design is computed in an open-source Finite Difference Time Domain simulation platform. Optical amplification in the range of 13.75 % is achieved in the data signal with a decrease in the linewidth up to 0.0079 µm and a quality factor of 114.58. The proposed device presents great potential in the field of photonic integrated circuits, biomedical technology, and programmable photonics.

In contemporary science and technology, photonic sensors are essential. They may be made to be extremely resistant to some physical parameters while also being extremely sensitive to other physical variables. Most photonic sensors may be incorporated on chips and operate with CMOS technology, making them suitable for use as extremely sensitive, compact, and affordable sensors. Photonic sensors can detect electromagnetic (EM) wave changes and convert them into an electric signal due to the photoelectric effect. Depending on the requirements, scientists have found ways to develop photonic sensors based on several interesting platforms. In this work, we extensively reviewed the most generally utilized photonic sensors for detecting vital environmental parameters and personal healthcare. These sensing systems include optical waveguides, optical fibers, plasmonics, metasurfaces, and photonic crystals. Various aspects of light are used to investigate photonic sensors' transmission or reflection spectra. In general, resonant cavity or grating-based sensor configurations that work on wavelength interrogation methods are preferred, so these sensor types are mostly presented. We believe this paper will provide insight into the novel types of available photonic sensors.

Environmental monitoring is an important topic and serves a vibrant scientific role by revealing long-term trends that can lead to new knowledge and understanding. Globally, there is active development of photonic sensors incorporating multidisciplinary research. The ultimate objective is to develop small, low-cost, sensitive, selective, quick, durable, remote-controllable sensors that are resistant to electromagnetic interference. Different photonic sensor designs and advances in photonic frameworks have shown the possibility to realize these capabilities. In this review paper, the latest developments in the field of optical waveguide and fiber-based sensors which can serve for environmental monitoring are discussed. Several important topics such as toxic gas, water quality, indoor environment, and natural disaster monitoring are reviewed.

Herein, we offer a numerical study on the devising of a unique 2D-heterostructure Photonic crystal (PC) that can split two orthogonally polarized light waves. The analysis is performed via a two-dimensional finite element method (2D-FEM) by utilizing COMSOL Multiphysics software. The device consists of two discrete designs of PC formation. The first PC formation is optimized so that it permits both TE and TM-polarization of light to transmit through it. Whereas the second PC formation possesses a Photonic Bandgap (PBG) only for TE-polarized light. These two formations are combined at an angle of 45 degrees, resulting in a reflection of self-collimated TE-polarized light at an angle of 90 degrees owing to the PBG present in the second PC formation. While permitting the self-collimated TM-polarized light wave to travel uninterrupted. The proposed device has a small footprint of ~10.5 μm2 offering low transmission loss and high polarization extinction ratio which makes it an ideal candidate to be employed as an on-chip polarization division multiplexing system.

In this paper, we have numerically investigated a metasurface based perfect absorber design established on the impedance matching phenomena. The paper comprises of two parts. In the first part, the device performance of the perfect absorber is studied which is composed of a silicon Nano-cylindrical meta-atoms periodically arranged on the thin gold layer. The device design is unique which works for both x-oriented and y-oriented polarized light, besides independent of the angle of incidence. In the second part of the paper, CO2 gas sensing application is explored by depositing a thin layer of functional host material polyhexamethylene biguanide polymer on the metasurface. The refractive index of the host material decreases due to the absorption of the CO2 gas. As a result, the resonance wavelength of the perfect absorber performs a prominent blueshift. With the help of the proposed sensor design based on metasurface, the CO2 gas concentration range of 0-524 ppm is detected. The maximum sensitivity of ~17.3 pm/ppm is acquired for the gas concentration of 434 ppm. The study presented in this work explores the opportunity of utilizing metasurface perfect absorber for gas sensing applications by employing the functional host materials.

A highly dirt resistant paint for building facades without chemicals harmful to nature and environment, is developed which resolves the unattractive disfigurement of building walls caused by dirt. The experimentation is scientifically and statistically planned with the aid of computer programming. It consists of a sequence of phases which include the selection of appropriate raw materials, adopting of Basic Language computer programming to generate a target population of paint formulations. The average PVC percentage is computed using theory and found to be 54.98% for the target population of 543143 paint formulations hence verifies the literature results. Experimentation and statistical analysis are performed to compare the classical conventional agitator with latest lab equipment like Nano mill and it is concluded that Nano mill performs better on the average than conventional agitator in preparation of paint formulations. Hence the sample of paint formulations is prepared on Nano mill and tested in laboratory using advanced available technology for the analysis and comparison of paint properties to determine the best paint formulation. The results are analyzed using Analysis Of Variance Technique (ANOVA) and it is concluded that the paint formulation named “O3” has the highest dirt resistance on the average. The final selected formula O3 is compared with three other competitor paints in market under natural environment for a period of almost one year. A regression model is also constructed to study the effect of environmental factors like time, temperature and humidity on dirt resistance of paints. It is found that O3 formulation is the best environment friendly which performs equally well with one competitor paint and has higher dirt resistance than two other competitor paint formulations containing harmful chemicals. The regression model of dirt resistance on variables including time, temperature and humidity shows that these factors are significantly affecting the dirt resistance of a given paint at 5% level of significance. 95.34% variation in the dirt resistance of a given paint is due to and explained by the given factors. The regression model is useful to predict the average dirt resistance of a given paint with a certain level of confidence. The project exemplifies the work of an applied research from conceptualization to successful commercialization for the paint industry.

Algaecides are chemicals that cause serious health problems. Conventional paints contain algaecides to improve the algae resistance on the paint film. Present research has suggested an environmental friendly paint formulation that focuses on developing algae resistance without having algaecides. In this research, Algae growth on newly developed paint is modeled by incorporating dirt resistance of paint and natural phenomena including humidity, temperature and time respectively. The fitted Model revealed explained variation of 59.65% in the average algae growth, of which, Dirt Resistance, Humidity and temperature and some of their interactions play significant role in this variation. Model suggests that the proposed newly developed paint without algaecides is more resilient to algae growth and significantly decreased the average algae growth rate by 0.53% as compared to conventional paints. Keeping the effect of all other factors constant, if dirt resistance of paint (D_c value) increases by one percent, average algae growth decreases by 12.98%; when temperature increases by 1^oC, average algae growth decreases by 22.4%; a positive unit change in the joint linear effect dirt resistance, temperature and humidity caused a decrease in average algae growth by 0.0031%. It was also observed that the individual effect of humidity variable was inversely related with average algae growth. However the combination of humidity and temperature, humidity and dirt resistance, humidity and time, and the quadratic effect of humidity were found to increase the average algae growth rate. The cubic effect of temperature variable by one degree centigrade resulted in decrease of average algae growth by 0.000907%.

Nowadays, more than 180 million people believe that the Holy Qur'an was sent by the Almighty Allah through Prophet Muhammad in 610-632 A.D in Mecca and Medina. However, the word Mecca (Q: 48:24) is mentioned only once in the entire Holy Qur'an, which is not related to the birth of the Prophet or any worship. Conventional Islam is mostly based on the hearsay of some Islamic narrators published in the eighth and ninth centuries. To think deeply and conduct research on the verses of the Holy Quran has been mentioned (special urge) directly and indirectly by this Holy Scripture itself many times but it would not be wrong to say that there is no scholarship on the verses of the Quran based on the research method described in the Holy Quran until the present century. Therefore, this paper has been dared to carry out by combining the methods of research followed in the Holy Quran and the academically accepted research methodology. The analysis shows that the results of almost fourteen hundred years of mythological history of conventional Islamic narrators are opposites. First of all, the proper name of the Prophet revealed by the Holy Quran is Ahmed, but Muhammad is an adjective and there are many such names. Secondly, this prophet was not born in Mecca, KSA, nor in 570/571 A.D, but in the Beqaa Valley of Lebanon, between the third and fourth centuries. Thirdly, the Muslim Hajj (pilgrimage) of Mecca is celebrated entirely according to the Lahwal Hadith (idle tales) (Q: 31:6) in the language of the Holy Quran. Originally the place designated for pilgrimage was in the Beqaa Valley, Lebanon. This article will have a double influence on the Muslim world, that is, Islamic scholars will think again deeply and research new ways of scholarship of the Holy Quran, instead of based on the hearsay of idle tales (Lahwal Hadith). On the contrary, those who are stubborn Islamic narrators, since they have already rejected the Holy Quran, will not hesitate to violently attack the researchers and they will not be positively motivated by this paper. This article specifically urges Islamic scholars to conduct in-depth studies on the most important issues of Islam using the Holy Quranic research method.

Cigarette butts (CBs) are the most diffuse waste in the world, often abandoned in the environment without proper disposal. They are dangerous because of the numerous harmful chemicals poten-tially released in the environment. There are, in literature, several technological options for CB recycling, but some critical concerns could affect their effectiveness due to the quality and quantity of CB litter collected in the proper way. The present paper focuses on policy framework social behavior, waste collection and transport and technological processes. The Extended Producer Responsibility scheme for CBs is proposed at European level as an action to tackle CB litter and encourage sustainable product development. The CB waste collection and transport is a key step for bringing CB to the recycling process. The main concern is the small quantity of CBs collected: 0.06 % of the municipal waste and 0.18 % of the unsorted waste in the administrative area of Pe-rugia. Another crucial issue is the need for behavioral interventions to increase education and awareness of smoker citizens, addressing the discrepancy between smokers’ behaviors and beliefs.

In this study, we construct a new Atangana-Baleanu fractional model for whooping cough disease to predict future dynamics of the disease, as well as to suggest strategies to eliminate the disease in an optimal way. We prove that the proposed model has a unique solution which is positive and bounded. To measure contagiousness of the disease, we determine the reproduction number R0 and use it to examine the local and global stability at equilibrium points that have symmetry. Through sensitivity analysis, we determine parameters of the model that are most sensitive to R0. The ultimate aim of this research is to analyze different disease prevention approaches in order to find the most suitable one. For this, we include the vaccination and quarantine compartments in the proposed model and formulate an optimal control problem to assess the effect of vaccination and quarantine rates on disease control in three distinct scenarios. Firstly, we study the impact of vaccination strategy and conclude findings with presentation of graphical results. Secondly, we examine the impact of quarantine strategy on whooping cough infection with possible elimination from the society. Lastly, we implement vaccination and quarantine strategies together to visualize their combine effect on infection control. In addition to the study of an optimal control problem, we examine the effect of fractional order on disease dynamics as well as the impact of constant vaccination and quarantine rates on disease transmission and control. We determine that the optimal control strategy with the three controls is more effective in reducing the spread of whooping cough infection. Implementation of Toufik-Atangana type numercial scheme both for the state and adjoint equations is another contribution of this article.

A new class of nano-cube core-shell heterostructures containing Ag coating on the top of WO₃ was fabricated. Physical vapor deposition was used to produce WO₃ based nano-heterostructures. All kind of wet toxic chemical process was avoided to make the process simple and contaminant free. Sputtering of WO₃ and a subsequent thermal annealing process was done to create nano-cubes of WO₃. After that, sputtering of Ag was performed to form the Ag-WO₃ core-shell nano-heterostructures (CSNH). The CSNHs were characterized using field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction analysis (XRD) and UV-vis spectroscopy. The morphologies, elemental analysis, interfaces, crystallinity, phases, and chemical compositions were analyzed. The bottom-up growth of WO₃ nanocubes was studied using different time periods at 900°C. Ag coating was also studied before and after annealing. Finally, an optical property (band gap) was also analyzed using Tauc plot derive from absorption spectra. The tailoring the band gap of WO₃ from ~2.9eV to ~ 2.45 eV was observed while Ag-WO₃ CSNH formed.

This paper discusses domestic problem of waiting hot water for the shower use till it reaches satisfactory temperature, which result a lot of wastage in fresh water. The outcome from research survey shows that there is no satisfactory solution till now as all solutions were either expensive or with no effective results. Local small inline electric heater equipped with fuzzy logic controller is proposed in this paper to be installed just before the showerhead to measure the water temperature and flow before the showerhead, as control input-variables, and decide the operating voltage of the heater, as control output-variable (MISO). MATLAB Simulink is used to model the proposed system. Different test cases are simulated to prove the performance and the safe operation of the system. Techno-economic study is carried out to determine the “Direct Benefits” and “Indirect Benefits” that can be achieved if such system is implemented in wide range. Azerbaijan data is taken as an example to calculate the economic benefits. The results show important benefits not only for economy but also for climate and the reduction of CO₂ gas emission. Different economic indices are provided to be an easy reference for decision makers and project managers.

In 2010, Parties to the Convention on Biological Diversity (CBD) adopted the Strategic Plan for Biodiversity 2011–2020 to address the loss and degradation of nature. Subsequently, most biodiversity indicators continued to decline. Nevertheless, conservation actions can make a positive difference for biodiversity. The emerging Post-2020 Global Biodiversity Framework has potential to catalyze efforts to ‘bend the curve’ of biodiversity loss. Thus, the inclusion of a goal on species, articulated as Goal B in the Zero Draft of the Post-2020 Framework, is essential. However, as currently formulated, this goal is inadequate for preventing extinctions, and reversing population declines; both of which are required to achieve the CBD’s 2030 mission. We contend it is unacceptable that Goal B could be met while most threatened species deteriorated in status and many avoidable species extinctions occurred. We examine the limitations of the current wording and propose an articulation with robust scientific basis. A goal for species that strives to end extinctions and recover populations of all species that have experienced population declines, and especially those at risk of extinction, would help to align actors towards the transformative actions and interventions needed for humans to live in harmony with nature.

This report is on online banking and information systems in online banking. It throws some light on the introduction and historical background of online banking. Next, in this term report online banking information is explained in detailed. We collected a few articles, related to internet banking, on which other researchers have worked. Then further we have brief them into a table where we have mentioned their problems and limitations. Next, we discussed them in detail, giving an overview of each article. Lastly, recommendations for the online banking sectors are also mentioned.

Prevalence of malnutrition among children under five is alarmingly high in Pakistan. However, there are ready-to-use therapeutic foods (RUTF) available which may be used to treat children with severe acute malnutrition (SAM). This study aims to assess the efficacy of prebiotics as a synergistic additive to RUTF to enhance blood parameters and anthropometric measurements in children with uncomplicated SAM living in Southern Punjab, Pakistan. A double-blind parallel treatment randomized controlled trial was conducted on 204 children aged between 6-59 months. Participants were randomized and allocated to the placebo (n=102) and experimental arms (n=102) at a 1:1 ratio. One group of children were provided RUTF and 4 g prebiotics, while the other group were given RUTF and starch as a placebo. Participants recruited for both arms were given treatment for eight weeks, and then their biochemical and anthropometric outcomes were evaluated. A substantial difference between the mean weight, mid upper arm circumference, haemoglobin, haematocrit, platelet count, mean corpuscular volume, mean corpuscular haemoglobin, and albumin was revealed. Conclusively, supplementation with RUTF and prebiotics has proven to be an efficient, effective and safe therapy for children suffering from SAM to improve their growth and development indicators and reduce the dangers of malnutrition in comparison to RUTF alone.

Keywords: Requirements prioritization, Next release plan, Software product planning, Decision support, MoSCoW, AHP, K-Menas, GMM, BIRCH, PAM, Hierarchical, Clustering, Clusters Evaluation

For a considerable length of time synthetic composts are utilized to satisfy the dirt necessity of supplements and yield, however huge measure of these substance manures are hazardous for condition, advantageous microorganisms, creatures, and people also. In this way, natural inviting and savvy biofertilizers are utilized. Biofertilizer are the substances which contain microorganisms those microorganisms might be growths, microscopic organisms, and protozoa which have capacity to build ripeness of soil by Nitrogen obsession, Phosphorous solubilization, and Iron sequestration. These cycles convert insoluble type of supplements into solvent structure and make it accessible to the foundations of plant which effectively take them up and use them. There are assortment of the yields whose profitability can be expanded by applying biofertilizer, for example, rice, oat, and other grain crops. In this audit we experience the method of utilization of biofertilizers, and how the assistance the plants and in which they help.

Standards are not only crucial for obtaining a certification for practical use, but also an essential guidance for inferring how and what to simulate as well test experimentally. This paper examines the potential applicability of existing standards from various domains, including aerospace and automotive, to Wing-Structure- Integrated high-pressure Hydrogen Tanks (SWITHs). It highlights the associated challenges and uncertainties, acknowledging the absence of a single, all-encompassing standard for SWITHs. We embark on an exploration aimed at identifying alternative standards that are best suited for SWITHs. The analysis scrutinizes existing standards that could potentially facilitate SWITH certification, with a particular focus on the inclusivity of externally loaded hydrogen tanks. Assessment criteria are established to filter standards that best meet the needs of SWITHs. Through this process, we identify two key standards that present themselves as the most promising alternatives. Moreover, we delineate the technical constraints involved in selecting the maximum nominal working pressure for high-pressure tanks intended for burst tests. Our findings reveal a current upper limit of 525 bar, imposed by the limitations of existing test facilities. The study underscores that these standards should serve as flexible guiding frameworks rather than rigid protocols, encouraging progressive development in the SWITH field.

In this paper, the effect of preheating on the mechanical properties and micro structure of similar friction stir welded AA6061 aluminum alloys sheets was investigated. Aluminum alloy 6061 sheets with a thickness of 5 mm and threaded cylindrical pins were used. Rotation and traverse speeds were 1200 rpm and 75 mm/min, respectively. The results of tensile tests performed on the welded samples showed that compared to the non-preheated samples, preheating had increased the strength and elongation of the joints by 58% and 46%, respectively. In the present study, during the welding process preheating cause emerged heat with lower slope from stir zone. This phenomenon may result in Increase the deformation resistance of material and consequently decrease of grain size. This grain refinement can improve the mechanical properties of welds. Accordingly, hardness and strength of the material will be increased.

With the advent of digitization, the integration of advanced technologies in operations and projects across all sectors is in progress. Accordingly, efforts are being made to utilize cutting-edge technologies to improve the circularity of the built environment. This study aimed to review the existing applications and limitations of building information modeling (BIM) tools for circular economy (CE) implementation from this perspective. A literature review was conducted to provide an overview of the use of BIM tools for conducting life cycle assessments, energy analysis, waste management, and formulation of material passports for buildings. It was found that BIM tools, which are available across all life cycle phases of building, have a great potential to improve the circularity of the sector. The overview provided on the use of various BIM tools may help stakeholders of the built environment understand the role of BIM for CE adoption in the sector.

Multi-criteria decision analysis (MCDA), one of the prevalent branches of operations research, aims to design mathematical and computational tools for selecting the best alternative among several choices with respect to specific criteria. In the cloud, MCDA based online brokers uses customer specified criteria to rank different service providers. However, subjected to limited domain knowledge, the customer may exclude relevant or include irrelevant criterion, which could result in suboptimal ranking of service providers. To deal with such misspecification, this research proposes a model, which uses notion of factor analysis from the domain of unsupervised machine learning. The model is evaluated using two quality-of-service (QoS) based datasets. The first dataset i.e., feedback from customers, was compiled using leading review websites such as Cloud Hosting Reviews, Best Cloud Computing Providers, and Cloud Storage Reviews and Ratings. The second dataset i.e., feedback from servers, was generated from cloud brokerage architecture that was emulated using high performance computing (HPC) cluster at University of Luxembourg (HPC @ Uni.lu). The simulation runs in a stable cloud environment i.e. when uncertainty is low, shows that online broker (equipped with the proposed model) produces optimized ranking of service providers as compared to other brokers. This is due the fact that proposed model assigns priorities to criteria objectively (using machine learning) rather than using priorities based on subjective judgments of the customer. This research will benefit potential cloud customers that view insufficient domain knowledge as a limiting factor for acquisition of web services in the cloud.

Information about molecular mechanism of pesticide resistance in the rust-red flour beetle, a major pest destroying grains and flour across Nigeria is grossly lacking, hindering evidence-based con-trol. Here, we identified to species level three populations of the red-flour beetle from Kano, Ni-geria, as Tribolium castaneum, and investigated the mechanism driving their insecticide resistance. IRAC susceptibility bioassays established high cypermethrin resistance, with LC50s of 4.35-5.46mg/ml in the three populations, NNFM, R/Zaki and Yankaba. High DDT and malathion resistance was observed in NNFM, with LC50s of 15.32- and 3.71mg/ml, respectively. High sus-ceptibility was observed towards dichlorvos in all three populations with LC50s of 0.17-0.35mg/ml, respectively. Synergist bioassay with piperonylbutoxide significantly restored cypermethrin sus-ceptibility, with mortality increasing almost threefold, from 24.8% obtained from 1.25mg/ml of cypermethrin, to 63.3% in synergised group (p=0.013), suggesting a preeminent role of P450s. The two major knockdown resistance (kdr) mutations, T929I and L1014F in the IIS4 and IIS6 fragments of voltage-gated sodium channel were not detected in both cypermethrin-alive and cyperme-thrin-dead beetles, suggesting lesser role of target-site insensitivity. These findings highlight the need to explore alternative control tools for this pest and/or explore incorporation of synergists, like piperonylbutoxide as additional chemistries into pesticides formulations to improve their ef-ficacy.

Endocannbinoids system (ECS) engrossed a considerable interest as potential therapeutic targets in various carcinomas and cancer related conditions alongside with neurodegenerative diseases. Cannabinoids are implemented in several physiological processes such as appetite stimulation, energy balance, pain modulation and the control of chemotherapy induced nausea and vomiting (CINV). However, pharmacokinetics and pharmacodynamics interactions could be perceived in drug combinations, so in this short review we tried to shed the light over the potential drug interactions of medicinal cannabis. Hitherto, few data have been provided to the healthcare practitioners about the drug-drug interactions of cannabinoids with other prescription medications. In general, cannabinoids are usually well tolerated, but the bidirectional effects may be expected with concomitant administered agents via affected membrane transporters (glycoprotein p, breast cancer resistance proteins) and metabolizing enzymes (Cytochrome P450 and UDP- glucuronosyltransferases). The caveats should be undertaken to closely monitor the responses of cannabis users with certain drugs to guard their safety, especially for the elderly and people with chronic diseases or kidney and liver conditions.

The Aminofunctional starch/Carboxylated nitrile butadiene rubber (ANS/XNBR) latex films were prepared with control (0), 5, 10, 15, and 20 phr of ANS loadings. The films were subjected to soil burial test for 8 weeks, which recovered every two weeks to quantify the degraded properties. The control (week 0) and biodegraded films were subjected to physical tests (crosslink density, tensile, and tear strength tests) and biodegradation quantification (mass loss retention, and water vapor transmission rates). The optimum physical properties of ANS/XNBR films were subjected to further assessment of its degradation properties which include morphological (optical and scanning electron microscopes (SEM)), Fourier transform infrared (FTIR) analysis, and thermogravimetric analysis (TGA) respectively. Overall, mechanical properties of biodegraded ANS/XNBR latex films decreased as biodegradation period elapses. The biodegradation assessment via water vapor transmission rates and mass loss analyses indicates the high degree of biodegradation rates were observed with higher loading of ANS/XNBR latex films. Morphological analyses via optical microscope shows the transformation of the films surface opacity during biodegradation test. SEM images depicted the microorganism remains on the film surfaces. For FTIR analysis, the most significant changes in the spectras of the films appeared in the region of 790–3000 cm⁻¹. TGA thermograph shows the thermal retention of the materials decreased, as the biodegradation period elapses for optimum ANS/XNBR latex films. From the results obtained, ANS/XNBR latex films shows optimum degradation and mechanical properties at 10 phr filler loading.

Structural design optimization (SDO) plays a pivotal role in enhancing various aspects of construction projects, including design quality, cost-efficiency, safety, and structural reliability. Recent endeavors in academia and industry have sought to harness the potential of Building Information Modeling (BIM) and optimization algorithms to optimize SDO and improve design outcomes. This review paper aims to synthesize these efforts, shedding light on how SDO contributes to project coordination. Furthermore, the integration of sustainability considerations and the application of innovative technologies and optimization algorithms in SDO necessitate more interactive early-stage collaboration among project stakeholders. This study offers a comprehensive exploration of contemporary research in integrated SDO employing BIM and optimization algorithms. It commences with an exploratory investigation, employing both qualitative and quantitative analysis techniques following the PRISMA systematic review methodology. Subsequently, an open-ended opinion survey was conducted among construction industry professionals in Europe. This survey yields valuable insights into the coordination challenges and potential solutions arising from technological shifts and interoperability concerns associated with widespread SDO implementation. These preliminary steps of systematic review and industry survey furnish a robust knowledge foundation, enabling the proposal of an intelligent framework for automating early-stage sustainable structural design optimization (ESSDO) within the construction sector. The framework ESSDO addresses the challenges of fragmented collaboration between architects and structural engineers. This proposed framework seamlessly integrates with the BIM platform, i.e., Autodesk Revit for architects. It extracts crucial architectural data and transfers it to the structural design and analysis platform, i.e., Autodesk Robot Structural Analysis (RSA), for structural engineers via the visual programming tool Dynamo. Once the optimization occurs, optimal outcomes are visualized within BIM environments. This visualization elevates interactive collaborations between architects and engineers, facilitating automation throughout the workflow and smoother information exchange.

Patients satisfaction with fast and high-quality services is the most important in the healthcare settings and specially in outpatient departments and private clinics. High quality services on health sector are indicated by continuous quality improvement (CQI). CQI is a progressive incremental process focused on safety of all participants, outcomes, systematic process, regulated and improved working environment at the later than earlier stages. Among the various suggested strategies, we adopted the patents feedback to improve the quality of services our clinic. All of the patient visited hospital were sent a massage on mobile and requested to provide their feedback on our services. Roughly around 5% of all visitors responded and filled up questionnaire. Majority of them were satisfied with the services in various department. However, they provided us some suggestions to identify the further gaps and improve the services in improving patients experience at our clinic. We considered their feedback, identified problems, redesigned the policies and implemented. After implementation of new strategies, we preliminary again evaluated the patients’ feedback on our services. Patients feedback explores that optimized methods of services for the has considerably increased the patients’ satisfaction. Taken together, our this shows that patients’ feedback is very important factor to improve patients’ experience at outpatient clinics using continuous quality improvement tools. For that reason, this study would serve as reference for public health stack holders, administrators and researchers.

Scoring targets in shooting sports is a crucial and time-consuming task that relies on manually counting bullet holes. This paper introduced an automatic score detection model using object detection techniques. The performance of seven models belonging to two different architectural setups was compared. Models like YOLOv8n, YOLOv8s, YOLOv8m, RetinaNet-50, and RetinaNet-101 are single-shot detectors, while Faster RCNN-50 and Faster RCNN-101 belong to the two-shot detectors category. The dataset was manually captured from the shooting range and expanded by generating more versatile data using Python code. Before the dataset was trained to develop models, it was resized (640x640) and augmented using Roboflow API. The trained models were then assessed on the test dataset, and their performance was compared using matrices like mAP50, mAP50-90, precision, and recall. The results showed that YOLOv8 models can detect multiple objects with good confidence scores. Among all, YOLOv8m performed the best with the highest mAP50 value of 96.7%, followed by the performance of YOLOv8s with the mAP50 value of 96.5%. It is suggested that if the system is to be implemented in a real-time environment, YOLOv8s is a better choice since it took significantly less inference time (2.3ms) than YOLOv8m (5.7ms) and yet generated the competitive mAP50.

The fourth industrial revolution has resulted in the digitalization of projects and operations across all sectors. Accordingly, efforts are being made to utilize advanced technologies to improve the energy efficiency of the building sector. This study has reviewed the current application and limitations of cutting-edge technologies in this regard. An overview of the use of the Internet of Things (IoT), artificial intelligence (AI), digital twin (DT), and building information modeling (BIM) for energy efficiency of buildings has been provided. It has been found that the use of Industry 4.0 technologies, during the construction and operational phase of buildings, has a great potential to reduce energy consumption and emissions of the sector. This study may help stakeholders of the built environment to understand the role of industry 4.0 tools for energy efficiency of the sector.

The SARS-CoV-2 was confirmed to cause the regional outbreak of coronavirus disease 2019 (COVID-19) in Wuhan, China. The 3C-like protease (3CL^pro), an essential enzyme for viral replication, is a valid target to compacts SARS-CoV and MERS-CoV. In this research, an integrated library consisting of 1000 compounds from Asinex Focused Covalent (AFCL) library and 16 FDA-approved protease inhibitors were screened against SARS-CoV-2 3CL^pro. Top compounds with significant docking scores and making stable interactions with catalytic dyad residues were obtained. The screening results in identification of compound 621 from AFCL library as well as Paritaprevir and Simeprevir from FDA-approved protease inhibitors as potential inhibitors of SARS-CoV-2 3CL^pro. The mechanism and dynamic stability of binding between the identified compounds and SARS-CoV-2 3CL^pro were characterized using 50 nanoseconds (ns) molecular dynamic (MD) simulation approach. The identified compounds are potential inhibitors worthy of further development as SARS-CoV-2 3CLpro inhibitors/drugs. Importantly, the identified FDA-approved therapeutics could be ready for clinical trials to treat infected patients and help to curb the COVID-19.

With increasing power and speed of laser welding, in-process monitoring has become even more crucial to ensure process stability and weld quality. Due to its low cost and installation flexibility, acoustic process monitoring is a promising method and has demonstrated its effectiveness. Since its feasibility has been the focus of existing studies, the temporal resolution of acoustic emissions (AE) has not yet been addressed despite its utmost importance for realizing real-time systems. Aiming to provide a benchmark for further development, this study investigates the relationship between duration and informativeness of AE signals during high power (3.5kW) and high speed (12m/min) laser beam butt welding. Specifically, the informativeness of AE signals is evaluated based on the accuracy of detecting and quantifying joint gaps for various time windows of signals, yielding numerical comparison. The obtained results show that signals can be shortened up to a certain point without sacrificing their informativeness, encouraging to optimize the signal duration. Our results also suggest that large gaps (> 0.3mm) induce unique signal characteristics in AE, which are clearly identifiable from 1 ms signal segments, equivalent to 0.2mm weld seam.

The comfort of human life depends on the quality, size, and reliability of the infrastructure projects. In the infrastructure systems, rapid growth is found, where the economic and sustainable impact has become a topic of significant concern for policies and government officials. To achieve con-straints of sustainable development, all the policies and actions over the infrastructure project's life cycle must be assessed. Decision-makers have adopted approaches for economic, social, and en-vironmental initiatives through Life Cycle Assessment (LCA) and Life Cycle Cost Analyses (LCCA) of infrastructure projects. The purpose of this review is to highlight the impact of per-forming LCA and LCCA in infrastructure projects. To achieve this goal, a systematic literature review methodology is adopted in which renowned databases, i.e., Web of Science, Science Direct, Emerald and Scopus were selected to extract the relevant literature. Using the PRISMA approach, 1251 publications were identified which were then filtered and 55 documents were included in the final review. In the extracted publications most, researchers were biased toward LCA and LCA individually, whereas few focused on integrated LCA and LCCA. The researchers assessed the costs and impact associated with the infrastructure project while there were less focused on the environmental cost. Besides this, techniques of economic, social, and environmental growth of infrastructure projects have been emphasized during the design phase because of substantial relations between infrastructure design and operation management. Moreover, a conceptual framework has been developed that will assist the decision-makers to consider the effects of LCA and LCCA on various aspects of the infrastructure project and how it impacts sustainability. In the last, a case study was performed to assess the developed framework with the incorporation of environmental impact cost.

Blockchain innovation stands out enough to be noticed and adopted in various countries and organizations around the world. Many businesses, including finance, medical services, inventory networks, security, libraries, and the internet of things, are currently under attack. For the benefit of the blockchain, many businesses incorporate blockchain technology into their frameworks. Despite its solidarity, blockchain faces a few challenges in security, protection, adaptability, and other areas. This paper examines the forward leap in blockchain innovation, as well as its applications and challenges. While many blockchain papers focus on digital currencies, IoT, and security, this paper focuses on the overall best in a class of blockchain innovation, its new twists and turns, and choices, particularly in areas other than cryptographic forms of money. The investigators' goal is to provide a thorough audit of the cryptography underlying blockchain to better understand the innovation. The examiners also conduct general research on people and venture blockchains, as well as future exploration opportunities and their implications for blockchain innovation.

This study aimed to explore the feasibility of using airborne acoustic emission in laser beam butt welding for the development of an automated classification system based on neural networks. The focus was on monitoring the formation of joint gaps during the welding process. To simulate various sizes of butt joint gaps, controlled welding experiments were conducted, and the emitted acoustic signals were captured using audible to ultrasonic microphones. To implement an automated monitoring system, a method based on short-time Fourier transformation was developed to extract audio features, and a convolutional neural network architecture with data augmentation was utilized. The results demonstrated that this non-destructive and non-invasive approach was highly effective in detecting joint gap formations, achieving an accuracy of 98%. Furthermore, the system exhibited promising potential for low latency monitoring of the welding process. The classification accuracy for various gap sizes reached up to 90%, providing valuable insights for characterizing and categorizing joint gaps accurately. Additionally, increasing the quantity of training data with quality annotations could potentially improve the classifier model's performance further. This suggests that there is room for future enhancements in the study.

This paper presents a novel approach of welding thick steel plates that offers time and energy savings compared with conventional techniques. The combination of gas metal arc welding (GMAW) and hot-wire technology simplifies the joint configuration and enhances the process tolerance. In this study, a square butt joint was prepared with as-cut edges and a thickness of 15 mm. The relationship between the welding current and the deposition rate of solo GMAW showed limitations and low process tolerance. Increasing the welding current led to a larger deposited volume with unnecessary weld penetration. An independent deposition volume due to hot-wire insertion was used to improve process tolerance. This approach provided an additional volume without increasing the welding current and reduced unnecessary penetration. With optimized parameters, full-penetration single-pass welding was achieved. Compared with the formation of a typical single-v butt joint at a similar welding speed of 30 cm/min, the proposed process reduced the minimum arc time and power consumption by approximately 83% and 62%, respectively. Moreover, a single pass at a travel speed of 60 cm/min was achieved with approximately 91% and 81% less arc time and power consumption, respectively. In summary, the combined process simplifies the joint configuration, enables full-penetration single-pass welding, and reduces time and energy requirements.

Objectives: Isolated mild neutropenia is a common clinical problem. The current study aims to validate our previous findings regarding the high prevalence of isolated neutropenia in Southern and Southwestern Saudi Arabia and explore the effect of altitude or regional differences. Methods: In this retrospective cross-sectional study, laboratory results of a commercial laboratory were screened over a period of 5 years (2016–2020) in seven different cities in South and southwestern Saudi Arabia. Participants’ laboratory investigations were reviewed and excluded for any ab-normal complete blood count, renal profile, liver profile, lipid profile, thyroid function test, fasting blood glucose, or HbA1c findings. Descriptive analysis and 95th percentile range were calculated using standard statistical methods. Results: A total of 91,880 complete blood count results were included in the final analysis. isolated neutropenia is common laboratory finding, with a prevalence ranging from 11-23%. The 2.5th percentile of the neutrophil count was lower than 1.5×109/L in all seven cities. Conclusions: Mild to moderate neutropenia is common in Southern and Southwestern Saudi Arabia. Benign ethnic neutropenia (BEN) may explain this high prevalence. Since BEN has no clinical significance, the reference range for normal neutrophil counts needs to be adjusted to reflect the effect of BEN.

Hearing impairment is an immensely diagnosed genetic cause, 5% of the total world population effects with different kind of congenital hearing loss (HL). In third-world countries or countries where consanguineous marriages are more common the frequency rate of genetic disorders are at its zenith. Approximately, the incidence of hearing afflictions is ostensibly 7-8:1000 individuals whereas it is estimated that about 466 million peoples suffer with significant HL, and of theses deaf cases 34 million are children’s up to March, 2020. Several genes and colossal numbers of pathogenic variants cause hearing impairment, which aided in next-generation with recessive, dominant or X-linked inheritance traits. This review highlights on syndromic and non-syndromic HL (SHL and NSHL), and categorized as conductive, sensorineural and mixed HL, which having autosomal dominant and recessive, and X-linked or mitochondrial mode of inheritance. Many hundred genes involved in HL are reported, and their mutation spectrum becomes very wide. Mapping of pathogenic genes in consanguinity family is facilitated to understand the disease history. Review presents the bases of HL and also focused on various genetic factors that cause deafness like the basics of genetic inheritance, and classic and well-characterized inherited factors of it. It also overviews the application of linkage analysis, SNPs genotyping and whole exome sequencing methods, in mapping and identification of new locus, causative genes and their variants in families inherited with HL. Conclusively, this review supports researchers in understanding the location of chromosome, the causative genes and specific locus which causing deafness in humans.

Herein, a novel cavity design of racetrack integrated circular cavity established on metal-insulator-metal (MIM) waveguide is suggested for refractive index sensing application. Over the past few years, we have witnessed several unique cavity designs to improve the sensing performance of the plasmonic sensors created on the MIM waveguide. The optimized cavity design can provide the best sensing performance. In this work, we have numerically analyzed the device design by utilizing the finite element method (FEM). The small variations in the geometric parameter of the device can bring a significant shift in the sensitivity and FOM of the device. The best sensitivity and FOM of the anticipated device are 1400 nm/RIU and ~12.01, respectively. We believe that the sensor design analyzed in this work can be utilized in the on-chip detection of biochemical analytes.

Rare earths are classified as most important and critical material for US economy and defense by Congress and a mandate has been set to increase their in-house production, domestic resource utilization and decrease reliance on foreign resources and reserves. They are widely available in earth crust as ore (bastnaesite (La, Ce)FCO₃, monazite, (Ce, La, Y, Th)PO₄, and xenotime, YPO₄), but their so-called economic reserves are sparsely located geographically. They may be produced by various means such as beneficiation (physical, chemical, mechanical, or electrical), reduction (direct or indirect), electrolysis (of aqueous or molten / fused single or mixed salt systems) at high temperature or hydrometallurgy. Out of these, direct reduction also known as metallothermic reduction (La and Ca reduction) is mostly utilized. Its variant, high temperature electrowinning of fused salts is also practiced widely. These processes are material and application specific. In this study, author will employ thermodynamics (Ellingham diagrams, free energy of formation, reduction potential, Nernst equation, Pourbaix (E_h-pH) diagrams, E-pO^-2 diagrams), kinetics and energetic of a chemical reaction (chemical metallurgy) to reduce rare earth oxide / salt to rare earth metals (REO/RES – REM). It is shown that materials and energy requirement vary greatly depending on type of mineral ore, production facility, and beneficiation / mineral processing method selected. Aim is to reduce dependence on coal deposits. It is anticipated this route will be able to produce rare earths with > 35% yield and > 98% purity which be described in subsequent studies and patents.

The world is facing a serious energy crisis and environmental pollution problems due to a sharp increase in the world population. Bioenergy is an eminent solution to these problems. Anaerobic digestion is a green energy technology used worldwide for the conversion of organic waste to biogas. It is reported that organic wastes are hard to digest and need some technical improvement in the anaerobic digestion process to improve biogas yield. Iron-based additives, due to their electron acceptance and donation capabilities, have been emphasized as being exceptional in improving anaerobic digestion process efficiency amongst all other enhancement options. This study reviews the major available types of iron-based additives, their characteristics, and their preparation methods. The preferred iron-based additive that has a significant effect on the enhancement of biogas yield is also discussed. The use of iron-based additives in the anaerobic digestion process with varying dosages and their impact on the biogas generation rate is also being studied. Substrates, operating parameters, and types of anaerobic digesters used in recent studies while researching the effects of iron-based additives are also part of this review. Lastly, this study also confirms that iron-based additives have a significant effect on the reduction rate of the volatile suspended solids, methane content, biogas yield, and volatile fatty acids.

Present study offers mathematical calculations of the roll-coating procedure lubricated with upper Convected Maxwell Fluid. An incompressible isothermal viscoelastic fluid is considered with roll and the porous web having uniform velocities. By employing Lubrication Approximation Theory, the desired equations of motion for the fluid concerned over porous web are modelled and analyzed. The suction rate on the web and injection rate at the roll surface are anticipated proportionate. Results for velocity profile and pressure gradient are obtained analytically. Fluid parameters of industrial significance i.e. detachment point, pressure, sheet /roll separating force, power contribution and coating thickness are also calculated numerically. Substantial and monotonic increase is witnessed in these quantities with the increase of flow parameters.

We report on an immunofluorescent paper-based assay for the detection of severe acute respiratory symptom coronavirus 2 (SARS-CoV-2) humanized antibody. The paper-based device was fabricated by using lamination technique for easy and optimized handling. Our approach utilises a two-step strategy that involves (i) initial coating of the paper-electrode with recombinant SARS-CoV-2 nucleocapsid antigen to capture the target SARS-CoV-2 specific antibodies, and (ii) subsequent detection of SARS-CoV-2 antibodies using fluorophore-conjugated IgG antibody. The fluorescence readout was observed with fluorescence microscopy. The images were processed and quantified using a MATLAB program. The assay can selectively detect SARS-CoV-2 humanized antibodies spiked in PBS and healthy human serum samples with the relative standard deviation of approximately 6.4% (for n = 3). It has broad dynamic ranges (1 ng to 50 ng/µL in PBS and 5 to 100 ng/µL in human serum samples) for SARS-CoV-2 humanized antibodies with the detection limits of 2 ng/µL (0.025 IU/mL) and 10 ng/µL (0.125 IU/mL) in PBS and human serum samples, respectively. We believe that our assay has the potential to be used as a simple, rapid, and inexpensive paper-based diagnostic device with a portable fluorescent reader to provide point-of-care diagnosis. This assay can be used for rapid examination of a large batch of samples toward clinical screening of SARS-CoV-2 specific antibodies as a confirmed infected active case or to evaluate the immune response to a SARS-CoV-2 vaccine.

High antioxidants level in food is gradually becoming popular because of the enhanced risk of oxidative stress in humans. Bread wheat is rich in vital antioxidants but its major bioactive compounds are not available for the human. This study was conducted with the aim to enhance the phytochemical constituents and antioxidative activity of wheat grains by fermenting it with the use of Bacillus subtilis KCTC 13241. The antioxidative potential was determined by DPPH (2,2-diphenyl-1-picryl- hydrazyl) and ABTS (3-ethyl-benzothiazo- line-6-sulfonic acid) radical scavenging assay as well by the concentration of amino acids, flavonoids, minerals, carbohydrates, and phenolic compounds. Different varieties showed different free radical scavenging potential on fermentation, which was significantly high with respect to their corresponding unfermented wheat varieties. The highest potential was found in a fermented wheat variety named Namhae and this combination can be used in the pharmaceutical and food industries.

A new series of 1,3,4-oxadiazoles derivatives was synthesized, characterized and evaluated for their in vitro and in vivo anti-thrombotic activity. Compounds (3a-3i) exhibited significant clot lysis with respect to negative control and reference drug streptokinase (30,000 IU) while enhanced clotting time (CT) values were observed (130-342 sec) for these tested compounds than the standard drug heparin (110 sec.). High affinity towards 1NFY with greater docking score was observed for the compounds (3a, 3i, 3e, 3d and 3h) than the control ligand RPR200095. In addition, very good inhibitory potential against factor Xa (F-Xa) was observed with higher docking scores (5612-6270) with ACE values (–189.68 to –352.28 kcal/mol) than the control ligand RPR200095 (Docking score 5192; ACE –197.81 kcal/mol. In vitro, in vivo and in silico results proposed that these newly synthesized compounds can be used as anti-coagulant agents.

Bubble (point defect) – a precursor of fuzz or under dense nanostructure formation is crystal lattice defect. Suitable selection of crystal lattice which inhibit Frenkel pair generation and intrinsically promotes self- interstitial solid solution strengthening contributes effectively towards making plasma facing material. For this, interstitial sites, their size, amount / fraction, positions, tendency of occupation and diffusion parameters (e.g. activation energies (Q), activation volumes) are determined. Fcc iron carbon alloys (austenitic stainless steels AISI / SAE 321, fcc structure, Pearson code cF4, space group Fm3̅m) are proposed as suitable candidates. Along with their room temperature fcc structure having 12 interstitial positions (4 octahedral, 6 coordination sites and 8 tetrahedral, 4 coordination sites / unit cell) to allow insertion of self (iron) atoms, they have excellent corrosion resistance, thermal conductivity, and non- magnetic properties. After their melting, casting, and machining to required dimensions and geometry, stabilizing heat treatment is applied to precipitate all carbon as TiC and prevent formation of Cr23C6 (sensitization). This resist heat and surface degradation and yield excellent architecture which not onlyinhibit Frankel pair generation but will also allow bulk assimilation or surface annihilation (loop punching) of this lattice point defect. A superior thermal, fluid, and structural design augment above. A second choice is presented as Co base superalloys owing to same fcc crystal structure and excellent properties (such as strength, dimensional stability, oxidation resistance) at high temperature.

During December 2019, a novel coronavirus named SARS-CoV-2 has emerged in Wuhan, China. The human to human transmission of this virus has also been established. The virus has so far infected more than 2 million people and spread over 200 countries. The World Health Organization (WHO) has declared COVID-19 a global health emergency due to its spread well beyond China. It has been established that this virus originates from bats and uses an intermediate host for transfer to humans. The knowledge about the intermediate host is important to find the virus shuttle mechanism to stop future outbreaks. For this, the genetic and structural analysis of coronaviruses spike proteins was performed using a computer-assisted approach.To conduct the In silico analysis, 43 sequences of spike protein belong to different species were retrieved from the NCBI nucleotide database. Pairwise and multiple sequence alignments were performed to check the similarities and differences of the retrieved sequences. Moreover, to highlight relationships among different species, phylogenetics analysis was performed using the MEGA software tool. In the end, protein structure alignment (superimposition) was performed against the reference structure by UCSF Chimera software. The results highlighted that the maximum similarity of human protein was found against Bat and Pangolinsequences. Moreover, among Bat and Pangolin, the highest similarity was found against pangolin based on phylogenetics analysis. These results suggest that SARS-CoV-2 transfers from bats to humans through pangolins.

In the pathogenesis of endometriosis, the differences between the eutopic and ectopic endometrium as well as between the eutopic endometrium with and without endometriosis are repeatedly pointed out. Various mechanisms have been suggested to explain these changes among them epithelial-mesenchymal transition (EMT). Recently, we suggested based on immunohistochemical data that most of the changes occur after and not before implantation of endometrial cells into ectopic locations. Furthermore, the subtle changes between eutopic endometrium with and without endometriosis and maintenance of epithelial cell-to cell contacts only suggest a partial EMT. In this study, we have re-analyzed the mRNA expression array data of eutopic and ectopic endometrium with respect to expression changes and EMT. Especially, we found that the similarity between eutopic endometrium with and without endometriosis is extremely high (~99.1%). In contrast, eutopic endometrium compared to ectopic endometrium only shows an overall similarity of ~95.3%. Analysis of some EMT-associated genes revealed small differences in the mRNA expression levels of some members of the claudin family. The array data suggest that the changes in eutopic endometrium at the beginning of the disease are quite subtle and that the majority of differences occur after implantation into ectopic locations.

Breast cancer is the most widespread malignancy in women from corner to corner of the world. Nanostructured lipid carrier (NLC) proved its efficacy in the treatment of cancer. NLC loaded with Imatinib (IMA) (NANIMA) was prepared and evaluated for in vitro efficacy in MCF-7 breast cancer cells. Hot homogenization method was used for the preparation of NANIMAs. Aqueous solution of surfactants (hot) was mixed with molten mixture of stearic acid and sesame oil (hot) under homogenization. The prepared NANIMAs were characterized and evaluated for size, polydispersity index, zeta potential, encapsulation efficiency, release studies, stability studies and MTT assay (cytotoxicity studies). The optimized NANIMA revealed particle size of 104.63 ± 9.55 d.nm, PdI of 0.227 ± 0.06 and EE of 99.79 ± 0.03. All NANIMAs revealed slow and sustained release behaviour. The surfactants used in the preparation of NANIMAs exhibited their effects on particle size, zeta potential, encapsulation efficiency, stability studies and release studies. The cytotoxicity studies unveiled 8.75 times increase in cytotoxicity for optimized NANIMA (IC50 = 6 µM) when compared with IMA alone (IC50 = 52.5 µM) on MCF-7 breast cancer cells. After this, NLC containing IMA possibly will be employed for the cure of breast cancer. A lesser amount of IMA loaded NLC will be sufficient than IMA alone for the treatment of breast cancer. Moreover, the patient will exhibit not as much of adverse effects as in case of IMA alone. Consequently, NANIMA could prove to be useful for effective therapeutic outcome in breast cancer treatment.

Urban air quality is increasingly becoming a cause for concern for the health of the human population. The poor air quality is already wreaking havoc in major cities of the world, where serious health issues and reduction of average human life by a factor of years are reported. The air quality in developing countries can become worse as they undergo development. The urban air quality varies non-linearly depending upon the various factors such as land use, industrialization, waste disposal, traffic volume, etc. To address this problem, it is necessary to look at the plethora of available literature from multiple perspectives such as types and sources of pollutants, meteorology, urban mobility, urban planning and development, health care, economics, etc. In this paper, we provide a comprehensive survey of the state-of-the-art in urban air quality. We first review the fundamental background on air quality and present the emerging landscape of urban air quality. We then explore the available literature from multiple urban air quality measurement projects and provides the insights uncovered in them. We then take a look at the sources that are significantly contributing to polluting the air quality. Finally, we highlight open issues and research challenges in dealing with urban air pollution.

Sugarcane is an important industrial crop of semitropical and tropical areas. Due to the importance of this crop it is cultivated on nearly 20 million hectares by more than 90 countries. This crop belongs to family Poaceae, a grass family which is economically vital tracheophyte family that has properties much like that of wheat, maize, rice and sorghum. The Poaceae family is globally vital for providing dietary macromolecules, carbohydrates, and different nutrients. The most important item of sugarcane for the consumption is sucrose that gets accumulated in the stalk internodes. Sucrose is taken out and refined by different mills which is used as a sweetener in human food industries and in the fermentation industry. Large production of alcohol is attained by Brazilian sugarcane industries.

Despite being well established phenomena, solidification principles are experiencing tough challenges in their application to explain microscale transport phenomena in additive manufacturing melt pool. The problem becomes even more complicated when applied to multicomponent bulk metallic glass matrix composites (BMGMC) whose behavior is dubious and still not fully understood. The aim of the present study is to highlight pathways to overcome these challenges. A comprehensive nucleation and growth model based on original KGT theory and Rappaz modification is proposed encompassing actual transient thermophysical BMGMC data to predict evolving microstructure during additive manufacturing. The model is aimed at pictorial representation of in-situ ductile phase dendrite evolution from melt pool during solidification using two-dimensional cellular automaton (CA) methods. It is proposed to be coded in MATLAB® using commercial simulation code ABAQUS® at back end for macroscopic heat transfer model. The results will be compared with experimental values for validation.

Newcastle disease virus (NDV) causes a highly contagious and devastating disease in poultry, Newcastle disease (ND). ND causes heavy economic losses to the global poultry industry by decreasing the growth rate, decrease egg productions, mortality, and morbidity. Although, significant advances have been made in the vaccine development, but outbreaks are reported in vaccinated birds leading to overall decreased growth rate. In this study, we report the damage caused by the NDV infection in the pancreatic tissues of vaccinated as well as specific pathogen free chickens. The histopathological examination of the pancreas showed sever damage in the form of partial depletion of zymogen granules, acinar cell vacuolization, necrosis, and apoptosis, congestion in the large and small vessels, sloughing of epithelial cells of pancreatic duct, and mild perivascular edema. Increased plasma levels of corticosterone, somatostatin, were observed in NDV infected chicks at 3 and 5-day post infection (DPI). Slight decrease in the plasma concentrations of the insulin were noticed at 5 DPI. Significant changes were not observed in the plasma levels of glucagon. Furthermore, NDV infection has decreases the activity and mRNA expression of amylase, lipase, and trypsin from the pancreas. Taken together, our findings highlight that NDV induces extensive tissue damage in pancreas, decrease the activity and expression of pancreatic enzymes and increase plasma corticosterone and somatostatin.

We present the design and overall development of an eight degrees of freedom (DOF) based Bioinspired Quadruped Robot (BiQR). The robot is designed with a skeleton made of cedar wood. The wooden skeleton is based on exploring the potential of cedar wood to be a choice for legged robots’ design. With a total weight of 1.19 kg, the robot uses eight servo motors that run the position control. Relying on the inverse kinematics, the control design enables the robot to perform the walk gait-based locomotion in a controlled environment. The robot has two main aspects: 1) the initial wooden skeleton development of the robot showing it to be an acceptable choice for robot design, 2) the robot’s applicability as a low-cost legged platform to test the locomotion in a laboratory or a classroom setting.

A case report of the diagnosis of Long Term Sequelae of West Nile Neuroinvasive Disease in a patient with 9 years history. Empirical data of symptoms and test reports has been presented and based on the available data likely pathogenesis of the disease has been discussed. The empirical data has been compared to the published literature to reach a highly confident diagnosis.

There is evidence that kidney involvement is frequently observed in COVID-19 patients, and can manifest as mild proteinuria to advancing acute kidney injury (AKI). One of the mechanisms is microvascular and macrovascular thrombosis caused by the hypercoagulation phase of the disease. Thromboelastography (TEG) is a valuable examination to detect significant hemostatic abnormalities, including the hypercoagulable state. This study analyzed the coagulation profiles, including TEG parameters, in COVID-19 patients who developed AKI compared to those who did not during their intensive care unit (ICU) stay, to identify predictors of AKI. Our single-center cohort retrospective study involved adult patients of COVID-19 in the ICU of Sardjito Hospital in Yogyakarta, Indonesia between May and September 2021. Patients were divided into two groups of AKI and non-AKI based on 2012 KDIGO definition and the elaboration by Indonesian Society of Nephrology. Variables showing a significant difference in the two groups were then analyzed using univariate and multivariate binary logistic regression. A total of 60 COVID-19 patients were included in the study, and 35% of them developed AKI. Compared to non-AKI patients, those with AKI exhibited a greater prevalence of diabetes mellitus (66.7% versus 35.9%, P = 0.023), higher D-Dimer levels (970 versus 685 ng/mL, P = 0.045), and higher values in TEG parameters of maximum amplitude/MA (74.6 versus 65.9 mm, P = 0.001) and coagulation index/CI (2.3 versus 1.0, P = 0.033). TEG parameter of MA emerged as the sole significant predictor for the development of AKI (OR, 6.33; 95% CI, 1.56 to 25.64). Our study validated the kidney involvement of COVID-19 infection, and showed that diabetes mellitus, high D-Dimer levels, and hypercoagulability serve as prominent risk factors in the development of AKI. Furthermore, TEG parameter of MA exceeding 70 mm is the single independent significant predictor of AKI.

Polymorphism in cytochrome P450 (CYP) 2C9 enzyme is known to cause significant inter-individual differences in drug response and occurrence of adverse drug reactions. Different alleles of the CYP2C9 gene have been identified but the notable alleles responsible for reduced enzyme activity are CYP2C9*2 and CYP2C9*3. No pharmacogenetic data is available on CYP2C9*2 and CYP2C9*3 alleles in Pakistani population. In Pakistan pharmacogenetics which examines the relationship between genetic factors and drug response, are in the early stages of development. We for the first time investigated the association between the CYP2C9 variant alleles CYP2C9*2 and CYP2C9*3 and the incidence of hypoglycemia in diabetic patients who were receiving the sulfonylurea medications. A total of n=400 individuals of Pashtun ethnicity were recruited from ten different districts of Khyber Pakhtunkhwa, Pakistan to participate in the study. The study participants were divided into two distinct groups: the case group (n=200) and the control group (n=200). The case group consisted of individuals with Type 2 Diabetes Mellitus (T2DM) who were receiving sulfonylurea medications and experience hypoglycaemia with it whereas the control group included individuals with T2DM who were receiving sulfonylurea medication but did not experience sulfonylurea-induced hypoglycaemia (SIH). Blood samples were obtained from study participants following informed consent. DNA was isolated from whole blood samples using Wiz-Prep DNA extraction kit. Following DNA isolation, CYP2C9 alleles were genotyped using MassARRAY sequencing platform at centre of genomics Rehman Medical Institute (RMI). The frequency of CYP2C9*2 (low activity allele) was more frequent in the diabetic patients with sulphonylurea-induced hypoglycaemia (SIH) compared to the control group (17.5% vs. 6.0%, p=0.021). The frequency of its corresponding genotype CYP2C9*1/*2 was higher in cases compared to control group (10% vs. 6% with P=0.036), same was true for genotype CYP2C9*2/*2 (7% vs. 3.5 % with P=0.028). Logistic regression analysis evident potential association of CYP2C9*2 allele and its genotypes with SIH. When adjusted for confounding factors such age, weight, sex, daily dose of sulphonylurea and triglyceride level the association between the CYP2C9*2 allele and hypoglycemia remains consistent. Confounding factors played no role in SIH because both groups (cases and controls) were closely matched in term of age, weight, sex, mean daily dose of sulphonylurea and trigyleride levels. Our study suggests that genetic information about a patient's CYP2C9 gene/enzyme can potentially assist physicians in prescribing the most suitable and safest drug based on their genetic make-up.

Structural displacement is an important metric for assessing structural conditions because it has a direct relationship with the structural stiffness. Many bridge displacement measurement techniques have been developed, but most methods require fixed reference points in the vicinity of the target structure which limits field implementations. A promising alternative is to use reference-free measurement techniques that indirectly estimate the displacement by using measurements such as acceleration, and strain. This paper proposes novel reference-free bridge displacement estimation by the fusion of single acceleration with pseudo-static displacement derived from co-located strain measurements. First, we propose a conversion of the strain at the center of a beam into displacement based on the geometric relationship between strain and deflection curves with reference-free calibration. Second, an adaptive Kalman filter is proposed to fuse the displacement generated by strain with acceleration by recursively estimate the noise covariance of displacement from strain measurements which is vulnerable to measurement condition. Both numerical and experimental validations are presented to demonstrate the efficiency and robustness of the proposed approach.

Consumption of poultry meat is higher than red meat due to easy availability, good taste, low cost and palatability. Significant improvement in meat yield and growth rate of broiler chicken has been brought about with the help of genetic selection of desirable traits. The present study was conducted to comparatively evaluate the chronic effect of domestic and broiler chicken meat consumption on male hypothalamic pituitary gonadal axis, lipid profile and oxidative stress on postnatal male rats. Rats were divided into five groups: control, B1, B2, D1 and D2 groups and were fed with 0.17g and 0.34g of broiler and domestic chicken meat from postnatal day 21 to PND90.The significant elevated body weight and weight gain in B2 group (P<0.01), minor change in B1 and D40 group (P<0.05) were detected. In gonadosomatic index absolute and relative epididymis weight, weight of seminal vesical and Prostate weight was significantly augmented in B2 compared to control and D2. Kidney and liver weight in B1, B2 was markedly elevated and minor change in D2 groups. ROS level in B2 was significantly higher than other experimental groups. Serum level of FSH, LH, testosterone, estradiol and low density lipoprotein was significantly elevated in B2 compared to control and D2. In B2 rats fed with 0.34g broiler meat exhibited a marked decreased seminiferous tubule diameter, epithelial height and increased lumen diameter changes that were more prominent compared to rats fed with 0.34g domestic chicken meat. Conclusively chronic administration of broiler meat induces marked alteration in reproductive system, testicular morphology, sexual hormones and oxidative stress in postnatal Sprague Dawley male rats compared to domestic chicken meat.

For bounded unit interval, we propose a new Kumaraswamy generalized (G) family of distributions from a new generator which could be an alternate to the Kumaraswamy-G family proposed earlier by Cordeiro and de-Castro in 2011. This new generator can also be used to develop alternate G-classes such as beta-G, McDonald-G, Topp-Leone-G, Marshall-Olkin-G and Transmuted-G for bounded unit interval. Some mathematical properties of this new family are obtained and maximum likelihood method is used for estimating the family parameters. We investigate the properties of one special model called a new Kumaraswamy-Weibull (NKwW) distribution. Parameter estimation is dealt and maximum likelihood estimators are assessed through simulation study. Two real life data sets are analyzed to illustrate the importance and flexibility of this distribution. In fact, this model outperforms some generalized Weibull models such as the Kumaraswamy-Weibull, McDonald-Weibull, beta-Weibull, exponentiated-generalized Weibull, gamma-Weibull, odd log-logistic-Weibull, Marshall-Olkin-Weibull, transmuted-Weibull, exponentiated-Weibull and Weibull distributions when applied to these data sets. The bivariate extension of the family is proposed and the estimation of parameters is given. The usefulness of the bivariate NKwW model is illustrated empirically by means of a real-life data set.

The emergence of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) linked with coronavirus disease 2019 (COVID-19) poses a serious threat to public health worldwide. Firstly, the SARS-CoV-2 was reported in Wuhan, Hubei Province, China in December 2019. Initially, the major proportion of virus-infected cases (i.e. about 99%) was reported in China and now it is being reported in other counties as well. Humans begin to be infected within their communities and transmittance of the viral epidemic increased rapidly due to lack of understanding of its transmission routes and precautionary measures. The existence of SARS-CoV-2 in China threatened the population greatly due to the high incidence of fatal respiratory infections. Current investigations speculated that this virus transferred into a human from viral-infected bats. However, the process of interspecies viral transmission is an important scientific question to be addressed. Due to the continuous increase in the patients infected with COVID-19 associated pneumonia, the World Health Organization (WHO) has included this viral epidemic to the priority list of diseases. Therefore, accelerated research developments are required to control the spread of this outbreak, as it is declared as a public health emergency by WHO especially in the absence of efficacious drugs and vaccines. Our review encompasses the recent status of disease severity in China, a particular replication mechanism of SARS-CoV-2 and potential risks and precautionary measures required to avoid contact with this fatal viral infection.

Development of rovers and development of infrastructure which enables them to probe other planets (such as Mars) have sparked a lot of interest recently specially with increasing public attention in Moon and Mars program by National Aeronautics and Space Administration. This is designed to be achieved by various means such as advanced spectroscopy and artificial intelligent techniques such as deep learning and transfer learning to enable the rover to not only map the surface of planet but to get a detailed information about its chemical makeup in layers beneath (deep learning) and in areas around point of observation (transfer learning). In this work, which is part of a proposal, later approach is explored. A systematic strategy is presented which make use of aforementioned techniques developed for metallic glass matrix composites as benchmark and helps develop algorithms for chemistry mapping of actual Martian surface on Perseverance Rover launching shortly.

Soil and Water Assessment Tool (SWAT) was used to simulate five glacierized river basins that are global in coverage and vary in climate. The river basins included the Narayani (Nepal), Vakhsh (Central Asia), Rhone (Switzerland), Mendoza (Central Andes, Argentina), and Central Dry Andes (Chile) with a total area of 85,000 km2. A modified SWAT snow algorithm was applied in order to consider spatial variation of associated snow melt /accumulation by elevation band across each subbasin. In the previous studies, melt rates varied as a function of elevation resulting from an air temperature gradient while the snow parameters were constant throughout the entire basin. A major improvement of the new snow algorithm is separating the glaciers from seasonal snow based on their characteristics. Two SWAT snow algorithms were evaluated in simulation of monthly runoff from glaciered watershed: 1) the snow parameters are lumped (i.e. constant throughout the entire basin) and 2) the snow parameters are spatially variable based on elevation band-subbasin (i.e. modified snow algorithm). Applying the distributed SWAT snow algorithm improved the model performance in simulation of monthly runoff with snow-glacial regime, so that mean RSR decreased to 0.49 from 0.55 and NSE increased to 0.75 from 0.69. Improvement of model performance was negligible in simulation of monthly runoff from the basins with monsoon runoff regime.

Extensive genome structure variation, such as copy number variations (CNVs) and presence/absence variations, is the basis for the remarkable maize genetic diversity; however, the effect of CNVs on maize herbivory defense remains largely underexplored. Here, we report that the naturally occurring duplication of the maize 9-lipoxygenase gene, ZmLOX5, leads to increased resistance of maize to herbivory by fall armyworms (FAW). Previously, we showed that ZmLOX5-derived oxylipins are required for defense against chewing insect herbivores and identified several inbred lines, including Yu796, that contained duplicated CNVs of ZmLOX5, referred to as Yu796-2×LOX5. To test whether introgression of the Yu796-2×LOX5 locus into the herbivore-susceptible B73 background that contains a single ZmLOX5 gene is a feasible approach to increase resistance, we generated a series of near-isogenic lines that contained either 2, 1 or 0 copies of the Yu796-2×LOX5 locus in the B73 background by six back crosses (BC6). Droplet digital PCR (ddPCR) confirmed the successful introgression of the Yu796-2×LOX5 locus in B73. The resulting B73-2×LOX5 inbred line displayed increased resistance against FAW associated with increased expression of ZmLOX5, increased wound-induced production of its primary oxylipin product, the α-ketol, 9-hydroxy-10-oxo-12(Z),15(Z)-octadecadienoic acid (9,10-KODA), and the downstream defense hormones regulated by this molecule, 12-oxo-phytodienoic acid (12-OPDA) and abscisic acid (ABA). Surprisingly, wound-induced JA-Ile production was not increased in B73-2×LOX5, resulting from the increased JA catabolism. Furthermore, B73-2×LOX5 displayed enhanced drought tolerance likely due to increased ABA and 12-OPDA content. Taken together, this study revealed that the duplicated CNV of ZmLOX5 quantitively contributes to maize antiherbivore defense and presents proof-of-concept evidence that the introgression of naturally occurring duplicated CNVs of a defensive gene into the productive, but susceptible, crop varieties is a feasible breeding approach for enhancing plant resistance to herbivory and tolerance to abiotic stress.

Fruit production is an important part of the gross domestic product for many countries around the world especially to those who have a strong focus on agriculture. However, long-term maintenance and yield stability of fruit production may be threatened by the ongoing climate change and its consequences like extended drought periods, heavy rain events, and floodings. Genome editing, with its progressive technological developments, offers opportunities to adapt relevant fruit plant species to new climatic conditions. Among modern genome editing techniques, CRISPR/Cas, in particular, has the potential to support breeding for those fruit plant species with extended breeding cycles, e.g., perennial fruits. In this review, we discuss CRISPR/Cas and other genome editing techniques in detail and how these techniques can be applied to support the breeding of fruit plant species for adaptation to changing climates. The chronological history of CRISPR/Cas9 systems, their associated computational tools, genomic data sources, transformation methods along with their delivery vehicles, quality improvement, environmental-stress resiliency, limitations, and future perspectives will also be discussed with respect to securing future global fruit production.

Originating in the Mediterranean, B. oleracea is grown all over the world and is highly valued for its nutritional value and variety in cooking. Its susceptibility to pests, diseases, and environmental stressors, however, poses significant challenges to sustaining consistent crop quality and productivity. The BASIC PENTACYSTEINE gene significantly impacts plant growth and responses to abiotic stresses. Nevertheless, little is known about its precise role and the underlying biological processes in B. oleracea. Eleven BPC genes in B. oleracea were identified by a thorough genome-wide investigation and categorized into three categories according to their structural traits and gene motifs. There were eight different chromosomes on which these BoBPCs were located. Comparative synteny analysis was used to reveal the evolutionary traits of potatoes, Arabidopsis, and B. oleracea. The BoBPC family genes in B. oleracea were found to have specific cis-elements linked to growth, stress responses, and hormone regulation when their promoter regions were studied. Cuticular wax synthesis expression revealed that all BoBZR1 genes, from wild to mutant, expressed at varied amounts in distinct types. Moreover, distinctive BoBPC gene expression patterns were found in the seven distinct tissues that were studied. Our thorough analysis shows that the BoBPC family is widely involved in B. oleracea developmental processes. The present findings provide an established theoretical basis for further exploration into the composition and roles of BoBPC in B. oleracea.

The consumption and sale of fresh-cut products and salads have been growing tremendously in the present era. Therefore, the microbial safety of such products is of great concern. In the current study, a survey of general microbiological safety of fresh-cut produce and salads at quick-service restaurants (QSR) was undertaken across the Kingdom of Saudi Arabia. These findings were compared with microbiological criteria for foodstuffs by Saudi standards, metrology, and quality organization SASO-GSO-1016. Of the 82 samples of fresh-cut produce, 7% of samples were found to be unsatisfactory or beyond the acceptable limits. TPC count was unsatisfactory at 22%, coliform at 48%, and Staphylococcus aureus at 4%. For 108 samples for fresh salads, 11% of samples were found to be unsatisfactory or beyond the acceptable limits,13%, 27%, 4%, and 27% of samples showed an unsatisfactory range of TPC, coliforms, S. aureus, and Escherichia coli, respectively. The fresh-cut produce and salads were microbiologically safe in the central region compared to the eastern region followed by the western region. The relatively higher count was found in green pepper, mixed vegetables, and lettuce followed by fresh-cut onions and coleslaw salads. No Salmonella was detected in both fresh-cut produce and salads. The restaurants should be more stringent in their processing to ensure the consumer safety. Washing and sanitization of produce is the only way to reduce the diffusion of food borne pathogens.

Assessment of extreme events and climate change on reservoir inflow is important for water and power stressed countries. Projected climate is subject to uncertainties related to climate change scenarios and Global Circulation Models (GCMs’). Extreme climatic events will increase with the rise in temperature as mentioned in the AR5 of the IPCC. This paper discusses the consequences of climate change that include extreme events on discharge. Historical climatic and gauging data were collected from different stations within a watershed. The observed flow data was used for calibration and validation of SWAT model. Downscaling was performed on future GCMs’ temperature and precipitation data, and plausible extreme events were generated. Corrected climatic data was applied to project the influence of climate change. Results showed a large uncertainty in discharge using different GCMs’ and different emissions scenarios. The annual tendency of the GCMs’ is bi-vocal: six GCMs’ projected a rise in annual flow, while one GCM projected a decrease in flow. The change in average seasonal flow is more as compared to annual variations. Changes in winter and spring discharge are mostly positive, even with the decrease in precipitation. The changes in flows are generally negative for summer and autumn due to early snowmelt from an increase in temperature. The change in average seasonal flows under RCPs’ 4.5 and 8.5 are projected to vary from -29.1 to 130.7% and -49.4 to 171%, respectively. In the medium range (RCP 4.5) impact scenario, the uncertainty range of average runoff is relatively low. While in the high range (RCP 8.5) impact scenario, this range is significantly larger. RCP 8.5 covered a wide range of uncertainties, while RCP 4.5 covered a short range of possibilities. These outcomes suggest that it is important to consider the influence of climate change on water resources to frame appropriate guidelines for planning and management.

Soil-borne Trichoderma spp. have been extensively studied for their biocontrol activities against pathogens and growth promotion ability with plants. However, the beneficial effect of Trichoderma on inducing resistance against insect herbivores has been considered only recently. Among diverse Trichoderma species, consistent with previous reports, we showed that root colonization by T. virens triggered induced systemic resistance (ISR) to leaf-infecting fungal pathogens. Whether T. virens induces ISR to insect pests has not been tested before. In this study, we investigated whether T. virens affects jasmonic acid (JA) biosynthesis and defense against fall armyworm (FAW) and western corn rootworm (WCR). Unexpectedly, the results showed that T. virens colonization of maize seedlings grown in autoclaved soil suppressed wound-induced production of JA, resulting in reduced resistance to FAW. Similarly, the bacterial endophyte Pseudomonas chlororaphis 30-84 suppressed systemic resistance to FAW due to reduced JA. Further comparative analyses of the systemic effects of these endophytes when applied into sterile or non-sterile field soil showed that both T. virens and P. chlororaphis 30-84 triggered ISR against hemibiotrophic fungal pathogen Colletotrichum graminicola in both soil conditions, but only suppressed resistance to FAW in sterile soil. In contrast to the effect on FAW defense, T. virens colonization of maize roots suppressed WCR larvae survival and weight gain. This is the first report suggesting the potential role of T. virens as a biocontrol agent against WCR.

An increasing global aridification due to climate change has made the health monitoring of vegetation indispensable to maintaining the food supply chain. Cost-effective and smart irrigation systems are required not only to ensure the efficient distribution of water, but also to track the moisture of plant leaves, which is an important marker of the overall health of the plant. This paper presents a novel electromagnetic method to monitor the water content (WC) and characterization in plant leaves utilizing the absorption spectra of water molecules in the terahertz (THz) frequency for four consecutive days. We extracted the material properties of leaves of eight types of pot herbs from the scattering parameters, measured using a material characterization kit in the frequency range of 0.75 to 1.1 THz. From the computed permittivity, it is deduced that the leaf specimens increasingly become transparent to the THz waves as they dry out with the passage of days. Moreover, the loss in weight and thickness of leaves were observed due to the natural evaporation of leaf moisture cells and change occurred in the morphology of fresh and water-stressed leaves. It is also illustrated that loss observed in WC on day 1 was in the range of 5\% to 22\%, and increased from 83.12\% to 99.33\% on day 4. Furthermore, we observed an exponential decaying trend in the peaks of the real part of the permittivity from day 1 to 4, which was reminiscent of the trend observed in the weight of all leaves. Thus, results in paper demonstrated that timely detection of water stress in leaves can help to take proactive action in relation to plants health monitoring, and for precision agriculture applications, which is of high importance to improve the overall productivity.

With the every passing day, the demand for data traffic is increasing and this demand forces the research community not only to look for alternating spectrum for communication but also urges the radio frequency planners to use the existing spectrum smartly. Cell size is shrinking with the every upcoming communication generation which makes the base station placement planning complex and cumbersome. In order to make the next-generation cost-effective, it is important to design the network in such a way which utilizes minimum number of base stations while ensure coverage and quality of service. This paper aims at develop a new approach using hybrid metaheuristic and metamodel applied in multi-transmitter placement planning (MTPP) problem. We apply radial basis function (RBF) metamodel to assist particle swarm optimizer (PSO) in a constrained simulation-optimization (SO) of MTPP to mitigate the associated computational burden of optimization procedure. We evaluate the effectiveness and applicability of proposed algorithm in a case study by simulating MTPP model with two, three, four and five transmitters.

Beaked whales (Ziphiidae) are rarely reported in the Arabian Sea. Four new cases (five individuals) were documented in deep waters offshore Pakistan through a pilot programme in 2015-2018 where trained fishers video-recorded net entanglements in the pelagic tuna drift gillnet fishery. Videos were analysed frame-by-frame. The large body size (est. 5-6m) of one specimen, its moderately bulbous melon, long tubular rostrum and a large falcate dolphin-like dorsal fin, indicated Longman’s beaked whale Indopacetus pacificus. It represents the first record for Pakistan (EEZ), and with a stranding at Gujarat, India, a second for the northern Arabian Sea. The other 4 ziphiids were significantly smaller (est. 3– 4.5m), with a decidedly non-bulbous melon, variable short to moderately short rostra, falcate to subtriangular dorsal fin and a nondescript greyish colouration, identified as Mesoplodon spp. Video quality was poor but none of the specimens showed tusks, arched mandible lines or noticeable linear tooth rakes, practically excluding adult males. The successful release of all net-entangled beaked whales is unprecedented. The simultaneous bycatch of two mesoplodonts in the same net set is equally exceptional. This citizen science strategy adds to our understanding of the distribution of I. pacificus and mesoplodonts, which may be more common in the Arabian Sea than the scarce literature suggests. If significant bycatch of beaked whales is confirmed, the massive tuna gillnet fishing effort in the Arabian Sea could have negative implications for their conservation status.

In recent years, e-commerce platforms have replaced conventional marketplaces. People are rapidly adopting internet shopping due to the convenience of making purchases from the comfort of their homes. Online review sites allow customers to share their thoughts on products and services. Customers and businesses are increasingly relying on online reviews to assess and improve the quality of products. Existing literature uses Natural language processing (NLP) to analyze customer reviews for different applications. Due to the growing importance of NLP for online customer reviews, this study attempts to provide a taxonomy of NLP applications based on existing literature. This study also examined emerging methods, data sources, and research challenges by reviewing 154 publications from 2013 to 2023 that explore state-of-the-art approaches for diverse applications. Based on existing research, the taxonomy of applications divides literature into five categories: sentiment analysis, review analysis, customer feedback and satisfaction, user profiling, and marketing and reputation management. It is interesting to note that the majority of existing research relies on Amazon user reviews. Additionally, recent research has encouraged the use of advanced techniques like Bidirectional Encoder Representations from Transformers (BERT), Long Short-Term Memory (LSTM), and ensemble classifiers. The rising number of articles published each year indicates increasing interest of researchers and continued growth. This survey additionally addresses open issues, providing future directions in online customer review analysis.

Quinine and its less toxic derivatives have served humanity for decades as potent antimalarial drugs. Emergence of drug resistance has narrowed the usage of these drugs in malaria prevention and treatment. Fortunately, these drugs have roles in the treatment of other diseases as well including rheumatic disorders and viral infections. Quinine derivatives have proven antiviral effects, especially against human immunodeficiency virus (HIV), Zika virus (ZiKV), herpes simplex virus (HSV), Ebola virus and dengue virus (DENV). The prophylactic and therapeutic role of Chloroquine/hydroxychroquine has become a topic of interest after the recent outbreak of novel Corona virus-19 (nCoV-19). This virus is also named severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) and WHO has officially named this disease as Corona virus disease 2019 (COVID-19). This lethal virus has affected almost 186 countries of the world till to date just in a period of four months of its outbreak. No approved antiviral drug is existed for the treatment of COVID-19. Therefore, this review is focused on potential prophylactic and therapeutic role of chloroquine/hydroxychlroquine for COVID-19.

City zones have become increasingly overcrowded as a result of the extensive population widening ratio and the swift relocation of people from villages. The traffic monitoring process is a major issue in these areas due to the massive traffic flow on the roads. This research proposed a cluster-based improved authentication and communication scheme for an Intelligent Transportation System in Vehicular AdHoc Networks (VANETs). Our primary objective is to optimize resource sharing in vehicular communication. We enhanced the reliability, scalability, and stability of fast-moving VANETs by introducing cluster-based routing schemes for Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) communications. We used a third-party certification authority for vehicle authentication to address security and privacy concerns. Our proposed schemes support minimizing the end-to-end (E2E) delay and route request, in addition to reducing link failure. Our schemes’ leading yield includes throughput enhancement, TCP Socket Initialization time minimization, TCP handshake response speedup, and DNS lookup improvement. The schemes are centred on short-range peer-to-peer (P2P) wireless communication in a 400-meter radius cluster. This includes innovative P2P wireless communications on VANET using minimized resources. The proposed schemes deliver a secure authentication mechanism with a securely generated vehicle authentication key provided by a certification authority. Furthermore, we have developed RESTful APIs in vehicular communication for implementation purposes, and also offered and implemented algorithms for resource sharing regarding V2V and V2I communication. Ultimately, we evaluated the performance of our experiments.

Fifth Generation (5G) communication technology is intended to offer higher data rates, outstanding user exposure, power consumption, and extremely short latency. Such cellular networks will implement a diverse multi-layer model comprising of device-to-device networks, macro-cells, and dissimilar categories of small-cells to assist customers with desired quality-of-service (QoS). This multi-layer model affects several studies that confront utilizing interference management and resource allocation in 5G networks. With the growing need and the lack of resources, the resource distribution problem desires to be focused capably to accomplish the traffic and to enhance network working. One of the utmost serious problems is to alleviate the jamming from the network in support of having a better QoS. However, there are limited review papers written on resource distribution, there is no particularize and organized review carry out in 5G resource allocation. Hence, this article covers and evaluates the argument using a classification of existing developing resource allocation schemes in 5G thoroughly by classifying the schemes to enhance the service quality. This survey comprises the discussion based on metrics used to evaluate the performance. It would also permit ahead beyond evidence on resource allocation methods in 5G and empowers the scholars to meet the present research areas to focus on.

3D reconstruction from a single 2D input is a classic problem in the field of computer vision. With the advancements in deep learning, the performance of 3D reconstruction has also significantly improved. The reconstruction task is more difficult for objects with no textures or complex deformations. This paper serves as a review of recent literature on 3D reconstruction from a single view, with a focus on deep learning methods from 2018 to 2021. Due to lack of standard datasets or 3D shape representation methods, it is hard make direct comparisons between all reviewed methods. However, this paper reviews different approaches for reconstructing 3d shape as depth maps, surface normals, point clouds and meshes; along with various loss functions and evaluation metrics used to train and evaluate these methods.

Along with the advantages associated with access to information and fast communication, screen time from increased digital media consumption has recently been associated with adverse effects on youth well-being. To get a clearer picture of its value for global youth based sustainability initiatives, this study investigates the effects of increased digital media consumption on youth's interests in ecosystem services, sustainability and science as a means for disease prevention. We achieve this, using data on 187821 adolescent students from 50 countries worldwide. Methodologically, we rely on a mixed bivariate ordered probit representation of youth's joint interest in the biosphere (ecosystem services and sustainability) and science as a means for disease prevention, which we then estimate using Markov Chain Monte Carlo (MCMC) Methods. We found that each level increase in adolescent students' reported frequency of news blogs visits and web browsing on broad science adversely affect their interests in ecosystem services, sustainability and science as a means for disease prevention. Although each level increase in youth's frequency of ecological website visits also reduces by 20% (with 95% CI [-0.36; -0.32]) their interests in the biosphere, it is found to increase however by 3% (with 95% CI [0.02; 0.05]) their interest science as a means for disease prevention. Overall, our results highlight heterogeneous effects of digital media consumption on adolescents' well-being in terms of their interests in ecosystem services, sustainability, and science as a means for disease prevention.

Hyperlipidemia is an identified risk factor for metabolic syndrome, obesity and cardiovascular complications characterized by elevated levels of lipids in blood. The present study aimed to inhibit HMG-CoA reductase with 15-oxoursolic acid through in-vivo and in-silico assessments. HFD-induced hyperlipidemia in rats was developed with a marked increase in total cholesterol (58.34 ± 0.21 mg/dl), triglycerides (45.45 ± 0.39 mg/dl), LDL-c (66.12 ± 0.10 mg/dl), VLDL-c (19.34 ± 0.16 mg/dl), and a decrease in HDL-c (10.34 ± 0.18 mg/dl). The oral administration of 15-oxoursolic acid at a concentration of 30 mg/Kg b.w significantly reduced the serum concentration of total cholesterol (42.65 ± 0.54 mg/dl), triglycerides (32.33 ± 0.16 mg/dl), LDL-c (50.34 ± 0.15 mg/dl) and VLDL-c (13.15 ± 0.45 mg/dl) respectively and an increased in the serum HDL-c (18.56 ± 0.34 mg/dl). 15-oxo ursolic acid also caused a decrease in the coronary risk index and atherogenic risk index. In-silico studies of 15-oxoursolic acid with HMG-CoA reductase showed significant interaction capability with binding energy (-9.26805 Kcal/mol). It is concluded that 15-oxoursolic acid could significantly reduce the total cholesterol, triglycerides and LDL levels in HFD-induced hyperlipidemia rats which might lead to new medication with significant hypolipidemic potential.

We present a very computationally light and fast approximation algorithm and then verify it with genetic algorithm and simulated annealing. We show that our algorithm is on par with GA and SA in terms of output produced while having a tightly bounded time complexity. Our algorithm works best when there is a strong positive correlation between the reliability of a component and its cost. We present two algorithms with the same essence. One of them is system cost bounded and the other is target reliability bounded. Our proposed algorithm works on a subsystem level redundancy instead of component level redundancy.

A hallmark of Alzheimer’s disease (AD) are the proteinaceous aggregates formed by the amyloid-beta peptide (Aβ) that is deposited inside the brain as amyloid plaques. The accumulation of aggregated Aβ may initiate or enhance pathologic processes in AD. According to the amyloid hypothesis any agent that has the capability to inhibit Aβ aggregation and/or destroy amyloid plaques represents a potential disease modifying drug. In 2023, a humanized IgG1 monoclonal antibody (lecanemab) against the Aβ soluble protofibrils was approved by US FDA for AD therapy thus providing compelling support to the amyloid hypothesis. To acquire a deeper insight on the in vivo Aβ aggregation, various animal models, including aged herbivores and carnivores, non-human primates, transgenic rodents, fish and worms are widely exploited. This review is based on the recent data obtained using transgenic animal AD models and presents experimental verification of the critical role in Aβ aggregation seeding of the interactions between zinc ions, Aβ with the isomerized Asp7 (isoD7- Aβ) and the α4β2 nicotinic acetylcholine receptor.

Glacial meltwater has been lifeline of agriculture in Gilgit-Baltistan for centuries which is being effected by the climatic changes and associated challenges. The government line institutions and development agencies have been investing to sustain and further extend the cultivated areas by leveraging the available glacial meltwater source. However, approximately 13% arable land, laying mainly along river banks, has limited access to glacial meltwater. Moreover, already cultivated areas also need alternate and sustainable irrigation water supplies to insurefood security. Hence, there is need to explore more potential options to address these challenges and bringing arable land under irrigation for regional prosperity and environmental gains. The International Centre for Integrated Mountain Development (ICIMOD) and its partners piloted solutions for aforementioned issues in Gojal, District Hunza. These solutions included river water lifting through solar and Hydraulic Ram Pumps, uphill water storages and application through drip irrigation systems. In order to assess the technical and economical viabilities of these piloted systems, a semi-structured questionnaire survey, field observation visits to collect data and economic assessment studies were carried out in Morkhun and Khyber. Both piloted systems have been proven as climate resilient, adaptable, environment friendly and economically viable. The cost to benefit ratio for solar powered drip irrigation and Hydraulic Ram Pump drip irrigation systems are 2.96 and 4.21 respectively, with payback period of 9.21 and 8.25 years respectively. The drip irrigation systems at Khyber and Morkhun sites have exhibited excellent hydraulic performance with Coefficient of Uniformity 92.61 and 93 % respectively. However, the field application efficiency of drip irrigation systems estimated for Khyber and Morkhun sites are 85.24 and 88.88% which are lower than the optimal value mainly due to lesser water holding capacity. The Hydraulic Ram Pump can lift four times more water to greater height, while comparing to solar pump of approximately similar capacity and higher capital costs. Both water lifting systems have some limitations and requires local customization for sustainable use.

Drinking water supplies in the developing world often serve as a biosphere for various organisms. Viral gastroenteritis is a neglected area of research in Pakistan, there is no data for the prevalence of enteric viruses in drinking water of the largest city of Karachi. The present study aimed to provide a survey of the existence of enteric viruses: human adenovirus (HAdV), human enteroviruses (hEV), and genotype A rotavirus (GARV) in tap water. Using a simple PCR approach, we detected 20%, 43%, and 23% of HAdV, hEV, and GARV in tap water respectively. We have also shown an overall quality of tap water at the pumping station and consumer tap. Moreover, we assessed the efficiency of small-scale water treatment methods for the removal of viruses.

The aims of this study are to measure the technical efficiency (TE) of Cambodian household’s rice production and trying to determine its main influencing factors using the stochastic frontier production function. The study utilized primary data collected from 301 rice farmers in three selected districts of Battambang by structured questionnaires. The empirical results indicated the level of household rice output varied according to differences in the efficiency of production processes. The mean TE is 0.34 which means that famers produce 34% of rice at best practice at the current level of production inputs and technology, indicates that rice output has the potential of being increased further by 66% at the same level of inputs if farmers had been technically efficient. Furthermore, between 2013-2015 TE of household’s rice production recorded -14.3% decline rate due to highly affected of drought during dry season of 2015. Moreover, evidence reveals that land, fertilizer, and pesticide are the major influencing input factors of household’s rice production, while disaster, education of household head, family size and other crops’ cultivated area are core influencing factors decreasing TE. Conversely, the main influencing factors increasing TE are irrigated area, number of plot area and sex of household head.

The aims of this study are to measure the technical efficiency (TE) of Cambodian household’s rice production and trying to determine its main influencing factors using the stochastic frontier production function. The study utilized primary data collected from 301 rice farmers in three selected districts of Battambang by structured questionnaires. The empirical results indicated the level of household rice output varied according to differences in the efficiency of the production processes. The mean TE is 0.34 which means that famers produce 34% of rice at best practice at the current level of production inputs and technology, indicates that rice output has the potential of being increased further by 66% at the same level of inputs if farmers had been technically efficient. Furthermore, between 2013-2015, TE of household’s rice production recorded -14.3% decline rate due to highly affected of drought during dry season of 2015. Moreover, evidence reveals that land, fertilizer, and pesticide are the major influencing input factors of household’s rice production, while disaster, education of household head, family size and other crops’ cultivated area are core influencing factors decreasing TE. Conversely, the main influencing factors increasing TE are irrigated area, number of plot area and sex of household head.

The present study aims to measure the technical efficiency and establish core factors effecting rice production in Cambodia. Four-years dataset generated from the central government document “Profile on Economics and Social” of entire 25 provinces between 2012-2015 and the stochastic production frontier model (SFA) was applied. The results indicated that the level of output (quantity) of Cambodian rice production varied according to the different level of capital investment in agricultural machineries, total rice actual harvested area, and technically fertilizers application within provinces. Furthermore, evidence revealed the overall mean efficiency of rice production is 78.4% implies that there is still room to further improve technical efficiency by given the same level of inputs and technology. More importantly, the findings revealed that irrigation, production technique and amount of agricultural supporting staffs are being as the most important influencing factors of rice production’s technical efficiency in Cambodia. In conclusion, present study strongly recommends the development of irrigation systems and good water management practices to be considered and bring into more effective actions by the central government as well as related agencies for improving rice production in Cambodia in addition to capital investment and improving technical skills of supporting staffs and rural farmers.

Social media platforms are not serving only as tools of communication rather they are acting like intricate systems managing our interactions. A major setback to our interactions occur when the flow of information in these networks gets distorted through polarization. It resembles a society where every debate turns into divide. Our research focuses exclusively on quantifying polarization as well as solving this issue head-on. In order to accurately gauge polarization, we’ve developed a new method that takes into consideration majority of its influencing factors. This helps us in correctly quantifying the polarization value of a given network and then by proposing it as an optimization problem we are attempting to maximally decrease polarization while staying within the set budget. We test our method on synthetic and real-world data sets, and find out that polarization is declining, and diversity is increasing. This proves that our recommendation engine has a penchant for finding the ideal connections between the nodes to start a dialogue. Our research presents a successful tactic to quantifying and reducing polarization in social media networks. The results indicate that our novel metric and intervention technique are effective in dismantling echo chambers, thereby promoting diversity in these networks.

Deep Neural Network (DNN) inference demands substantial computing power, resulting in significant energy consumption. A large number of negative output activations in convolution layers are rendered zero due to the invocation of the ReLU activation function. This results in a substantial number of unnecessary computations that consume significant amounts of energy. This paper presents ECHO: Energy-efficient Computation Harnessing Onilne Arithmetic - A MSDF-based accelerator for DNN inference, designed for computation pruning, utilizing an unconventional arithmetic paradigm known as online/ most-significant digit first (MSDF) arithmetic which performs computations in a digit-serial manner. The MSDF digital serial computation of online arithmetic enables overlapped computation of successive operations leading to substantial performance improvements. The online arithmetic, coupled with a negative output detection scheme, facilitates early and precise recognition of negative outputs. This, in turn, allows for the timely termination of unnecessary computations, resulting in a reduction of energy consumption. The implemented design has been realized on the Xilinx Virtex-7 VU3P FPGA and subjected to a comprehensive evaluation through a rigorous comparative analysis involving widely used performance metrics. Experimental results demonstrate promising power and throughput improvements compared to contemporary methods. In particular, the proposed design achieved an average improvement in power consumption of up to 81%, 82.9%, and 40.6% for VGG-16, ResNet-18, and ResNet-50 workloads compared to the conventional bit-serial design, respectively. Furthermore, significant average speedups of 2.39×, 2.6×, and 2.42 were observed when comparing the proposed design to conventional bit-serial designs for VGG-16, ResNet-18, and ResNet-50 models respectively.

Validation and verification are the critical requirements in the knowledge acquisition method for the clinical decision support system (CDSS). After acquiring the medical knowledge from diverse sources, the rigorous validation and formal verification process are required before creating the final knowledge model. Previously, we have proposed a hybrid knowledge acquisition method for acquiring medical knowledge from clinical practice guidelines (CPGs) and patient data in the Smart CDSS for treatment of oral cavity cancer. The final knowledge model was created by combining knowledge models obtained from CPGs and patient data after passing through a rigorous validation process. However, detailed analysis shows that due to lack of formal verification process, it involves various inconsistencies in knowledge relevant to the formalism of knowledge, conformance to CPGs, quality of knowledge, and complexities of knowledge acquisition artifacts. Therefore, it is required to enhance a hybrid knowledge acquisition method that thwarts the inconsistencies using formal verification. This paper presents the verification process using the Z formal method and its outcome as an enhanced acquisition method – known as the refined knowledge acquisition (ReKA) method. The ReKA method adopted verification method and explored the mechanism of theorem proving using the Z notation. It enables to identify inconsistencies in the validation process used for hybrid knowledge acquisition. Additionally, it refines the hybrid knowledge acquisition method by discovering the missing steps in the current validation process at the acquisition stage. Consequently, ReKA adds a set of nine additional criteria to be used to have a final valid refined clinical knowledge model. The criteria ensure the validity of final knowledge model concerning formalism of knowledge, conformance to GPGs, quality of the knowledge, usage of stringent conditions and treatment plans, and inconsistencies possibly resulting from the complexities. Evaluation, using four medical knowledge acquisition scenarios, shows that newly added knowledge in CDSS due to the addition of criteria by ReKA method always produces a valid knowledge model. The final knowledge model was also evaluated with 1229 oral cavity patient cases, which outperformed with an accuracy of 72.57\% compared to a similar approach with an accuracy of 69.7\%. Furthermore, ReKA method identified a set of decision paths (about 47.8%) in the existing approach, which results in a final knowledge model with low quality, non-conformed from standard CPGs. In conclusion, ReKA is formally proved method which always yields valid knowledge model having high quality, supporting local practices, and influenced from standard guidelines.

Cotton is the most ubiquitous and profitable fiber with diverse industrial and domestic applications. Grown in over 100 countries, it has a global market value of about $40 billion and employs over 350 million people from fields to textile mills, contributing about 7% of total labor-force recruitment in developing economies. Cotton has an indeterminate growth habit and an extensive tap root system affected by soil physicochemical and environmental conditions. There is a consensus among experts that conventional cotton cultivation still has a long way to attain sustainability, which is essential if cotton will maintain its competitive edge over other natural and synthetic fibers like hemp, polyesters, and rayon. Despite several efforts already committed to growing cotton sustainably, sustainability has eluded cotton cultivation globally because of the intense farm inputs (freshwater, pesticides, and heavy-duty equipment) needs, especially in developing economies. Some of the technological advancements towards achieving the goal of sustainable cotton cultivation include the development of new varieties, improved irrigation and mulching and precision agriculture techniques, application of remote sensing and Unmanned Aerial Systems (UAS) combined with image processing, and the introduction of autonomous and multi-purpose robotic platforms for growing and harvesting cotton. This review attempts to evaluate the successes already achieved by stakeholders in moving cotton towards sustainable production and identify areas where efforts are still needed to reach sustainable production and improved profitability goals for cotton with projections for future research directions.

Construction 4.0 is witnessing exponential growth in Digital Twin (DT) technology developments and applications, revolutionizing the adoption of Building Information Modelling (BIM) and other emerging technologies used throughout the lifecycle of the built environment. BIM provides technologies, procedures, and data schemas representing building components and systems. At the same time, DT enhances this with real-time data for cyber-physical integration, enabling live asset monitoring and better decision-making. Despite being in the early stages of development, DT applications have rapidly progressed in the AEC sector, resulting in a diverse literature landscape due to the various technologies and parameters involved in fully developing the DT technology. The intricate complexities inherent in digital twin advancements have confused professionals and researchers. This confusion arises from the nuanced distinctions between the two technologies, i.e., BIM and DT, causing a convergence that hinders realizing their potential. To address this confusion and lead to a swift development of DT technology, this study presents a holistic review of the existing research focusing on the critical components responsible for developing DT applications in the construction industry. The study identifies five crucial elements: technologies, maturity levels, data layers, enablers, and functionalities. Additionally, it identifies research gaps and proposes future avenues for streamlined DT developments and applications in the AEC sector. Future researchers and practitioners can target data integrity, integration and transmission, bi-directional interoperability, nontechnical factors, and data security to achieve mature digital twin applications for AEC practices. This study highlights the growing significance of DTs in construction and provides a foundation for further advancements in this field to harness its potential to transform built environment practices.

The feasibility of using zeolites, synthesized from components found in municipal solid waste fly ash (MSW-FA), as sorbents for the recovery of nutrients (nitrate and phosphate) and heavy metals is critically assessed in this review. The inherent drawbacks of utilising a highly contaminated, variable, and relatively Al- and Si-dilute source such as MSW-FA to synthesize zeolites are discussed, and different methods to extract and decontaminate zeolite precursor materials from MSW-FA are considered. Ways to synthesize tailored zeolites and how their properties as well as the operational conditions impact the adsorption of cations such as ammonium and heavy metals are summarized. The use of surface-modified zeolites to adsorb nitrate and phosphate is also reviewed. And subsequently, approaches to utilise directly or recover for reuse the adsorbed compounds are considered, discussing potential challenges and mitigating measures related to leaching of unwanted compounds from the zeolites. Moreover, the possibility to regenerate the adsorption capacity of the zeolites for multiple adsorption cycles is considered. In the final chapter of the review a more general discussion of the main challenges and existing research gaps is provided, giving directions for recommended studies.

Keywords: olfactory rehabilitation; chronic pain; fMRI;

Bifenthrin is a synthetic pyrethroid insecticide. It is used worldwide against different agricultural pests. Nervous system (NS) is the primary target organ for the pyrethroid group of insecticide which causes hyper excitation. The aim of this study to determine the effects of bifenthrin on the brain of rabbits. The animals were treated for 14 days with three different doses (1/5th, 1/10th and 1/15th of LD50) of bifenthrin. Neurotransmitters and Histopathological alterations were observed at the end of the experiments. Neurochemical parameters were checked 24 hours after the last dose. Significant changes in the level of biogenic amines were observed. The levels of epinephrine (EPN), dopamine (DA), 3, 4 dihydroxyphenylacetic acid (DOPAC) were decreased as compared to controls group with the increase in insecticide. However, norepinephrine (NE) and homovanillic acid (HVA) levels were found to be significantly higher than those of the controls. A significant reduction in the activity of the acetyl cholinesterase enzyme was found in the frontal cortex’s erythrocyte, plasma and brain of rabbit with the increase in administered bifenthrin. The oxidative stress showed significantly decrease in the activity of glutathione peroxidase (GPx), superoxide dismutase (SOD), catalase (CAT) and glutathione S- transferase (GST) with the increase in dose of bifenthrin. Histopathological study of brain tissues showed normal GC (glial cells) and NC (neuronal cells) in the frontal cortex of brain tissue of control groups while the treated groups showed evacuation (odema), elongation of pyramidal nucleus, glial cell damage and brain haemorrhage.

This study aims at the sustainable valorization of eggshells (ES) from different countries of origin in cement concrete as a cement replacement for Hong Kong. For this purpose, sixteen different eggs from different regions across the world were selected from the local market. Firstly, the extent of uniformity in the weight and mineral content of sampled eggshells were assessed by a specific gravity test and thermogravimetric analysis (TGA), respectively. It was found that specific gravity varies between 2.02 and 2.39, with an average value of 2.20 ± 0.01, whereas CaCO₃ varies between 94.65% and 97.23%, with an average value of 96.33%. These values were a bit lower than those of extra-pure limestone (LS) because of the organic part and the porous structure of eggshells. Secondly, three different eggshells were selected for cement replacement in cement concrete, both in the uncalcined and calcined states, based on having the highest, medium, and lowest CaCO₃ content, respectively. To get the calcined eggshells, the eggshells were calcined at 800^oC for three hours. It was found that the strength of eggshells varies with CaCO₃, but the variation was acceptable. The calcined eggshells showed comparatively more compressive strength and were close to the LS because of the free CaO and the absence of an organic part. In general, the variation in the basic properties of eggshells from different regions across the world is negligible and suitable to use as a cement replacement with acceptable variation in strength in Hong Kong.

The efficiency of a new composite material of the layered double hydroxide (LDH) of ZnMgAl and rice husk biochar (RHB) for the removal of Cu(II) and Pb(II) ions from synthetic wastewater was investigated in this study. The images of scanning electron microscope showed extremely fine crystalline LDH particles decorated on the rough surface of the RHB while the succesful formation of the composite adsorbent (LDH/RHB) was confirmed by the corresponding energy dispersive X-ray and the Fourier-transform infrared spectroscopy. An equilibrium contact time of 30 and 15 min for Cu2+ and Pb2+, respectively, was proposed for the optimum performance of the batch adsorption process. The dose of the LDH/RHB adsorbent was optimized at 0.4 g yielding maximum adsorption capacities of 117 and 124 mg g-1 for Cu2+ and Pb2+, respectively, with corresponding maximum removal efficiencies of nearly 94% and 99%. The initial meta concentrations was optimized at 50 or 60 mg L-1 corresponding to maximum removal efficiencies or adsorption capacities. For the changing initial metal’s concentration, the removal efficiencies remained unchanged for up to 50 mg L-1 and decreased by about 50% by increasing the initial concentrations from 50 to 100 mg L-1. The adsorption capacities observed a linear increasing trend by increasing the initial concentrations from 5 to 60 mg L-1 and remained unchanged afterward up to 100 mg L-1. A solution pH of 6.0 yielded optimum results with an increasing trend in adsorption capacities and percentage removal by changing the solution pH from 2.0 to 7.0. Based on the best-fit of the pseudo second-order kinetic model to the experimental data, the chemisorption was suggested to be the controlling mechanism of adsorption. The fitting of the Langmuir model suggested a monolayer sorption of Cu2+ and Pb2+ in addition to a heterogeneous adsorption as supported by the fitting of the Temkin isotherm. The application of the Dubinin–Radushkevich isotherm proposed a physical adsorption (mean free energy of adsorption less than 8 kJ mol−1) of both heavy metal ions on the surface of the LDH/RHB adsorbent.