Search Results (1,418,512)

The objective of this study was to evaluate the genetic effects involved in post-harvest water loss of C. baccatum fruits and to correlate fruit morphological characteristics. Fruits of eight landraces of C. baccatum and their twenty-eight hybrids were evaluated in a randomized, complete block design. Analysis of variance, diallel analysis, phenotypic and genotypic correlation, and path analysis for eight fruit traits were performed. Fruit width, fruit length, dry matter content, and fruit wall thickness were determined by additive gene effects. On the other hand, the non-additive effects played more important role than additive ones, including water loss, cuticle thickness, exocarp thickness, and total soluble solids. The relationship of fruit traits suggested that indirect selection can be carried out from field experiments under different environmental conditions. Overall, genitors 4, 24, 50, and 56 should be selected to form new populations to improve these traits. The Brazilian pepper landraces of C. baccatum species are a source of genetic variability for plant breeders, and the new segregating populations emerging through the crossing of pepper lines with reduced water loss should be developed, opening new ways for conventional breeding. Full article

Increased human T-cell leukemia virus type 1 (HTLV-1) proviral load (PVL) is a significant risk factor for HTLV-1-associated myelopathy/tropical spastic paraparesis (HAM/TSP). There is controversy surrounding whether HTLV-1-specific cytotoxic T lymphocytes (CTLs) are beneficial or harmful to HAM/TSP patients. Recently, HTLV-1 Tax 301–309 has been identified as an immunodominant epitope restricted to HLA-A*2402. We investigated whether HLA-A*24 reduces HTLV-1 PVL and the risk of HAM/TSP using blood samples from 152 HAM/TSP patients and 155 asymptomatic HTLV-1 carriers. The allele frequency of HLA-A*24 was higher in HAM/TSP patients than in asymptomatic HTLV-1 carriers (72.4% vs. 58.7%, odds ratio 1.84), and HLA-A*24-positive patients showed a 42% reduction in HTLV-1 PVL compared to negative patients. Furthermore, the PVL negatively correlated with the frequency of Tax 301–309-specific CTLs. These findings are opposite to the effects of HLA-A*02, which reduces HTLV-1 PVL and the risk of HAM/TSP. Therefore, we compared the functions of CTLs specific to Tax 11–19 or Tax 301–309, which are immunodominant epitopes restricted to HLA-A*0201 or HLA-A*2402, respectively. The maximum responses of these CTLs were not different in the production of IFN-γ and MIP-1β or in the expression of CD107a—a marker for the degranulation of cytotoxic molecules. However, Tax 301–309-specific CTLs demonstrated 50-fold higher T-cell avidity than Tax 11–19-specific CTLs, suggesting better antigen recognition at low expression levels of the antigens. These findings suggest that HLA-A*24, which induces sensitive HTLV-1-specific CTLs, increases the risk of HAM/TSP despite reducing HTLV-1 PVL. Full article

The varicella-zoster virus (VZV) is a human neurotropic herpes virus responsible for varicella and herpes zoster (HZ). Following primary infection in childhood, VZV manifests as varicella (chickenpox) and enters a period of latency within the dorsal root ganglion. A compromised cellular immune response due to aging or immunosuppression triggers viral reactivation and the development of HZ (shingles). Patients with autoimmune diseases have a higher risk of developing HZ owing to the immunodeficiency associated with the disease itself and/or the use of immunosuppressive agents. The introduction of new immunosuppressive agents with unique mechanisms has expanded the treatment options for autoimmune diseases but has also increased the risk of HZ. Specifically, Janus kinase (JAK) inhibitors and anifrolumab have raised concerns regarding HZ. Despite treatment advances, a substantial number of patients suffer from complications such as postherpetic neuralgia for prolonged periods. The adjuvanted recombinant zoster vaccine (RZV) is considered safe and effective even in immunocompromised patients. The widespread adoption of RZV may reduce the health and socioeconomic burdens of HZ patients. This review covers the link between VZV and autoimmune diseases, assesses the risk of HZ associated with immunosuppressant use, and discusses the benefits and risks of using RZV in patients with autoimmune diseases. Full article

The preparation of conducting polymer aerogels is an effective strategy to produce innovative materials with enhanced physicochemical properties. Herein, polypyrrole (PPy) aerogels were oxidatively prepared in the presence of tannic acid (TA) with different concentrations (2.5, 5, and 10% mole ratio to pyrrole monomer) under freezing conditions. Nanofibrillated cellulose (NFC) was added during the PPy/TA synthesis to enhance mechanical stability. The effect of TA concentration on the aerogels’ morphology, conductivity, thermal stability, and adsorption capacity was investigated. The conductivity of 9.6 ± 1.7 S cm⁻¹ was achieved for PPy/TA prepared with 2.5% TA, which decreased to 0.07 ± 0.01 S cm⁻¹ when 10% TA was used. PPy/TA aerogels have shown high efficacy in removing Cr(VI) ions from aqueous solutions. Adsorption experiments revealed that all the aerogels follow pseudo-second-order kinetics. PPy/TA prepared with NFC has a maximum adsorption capacity of 549.5 mg g⁻¹. Full article

This study was designed to evaluate the effects of yacon (Smallanthus sonchifolius) juice byproduct (YJB) on the growth performance, digestive and antioxidant enzyme activities, and disease resistance against Streptococcus iniae of juvenile black rockfish (Sebastes schlegelii) based on different feeding schedules. Four different YJB feeding strategies were evaluated: feeding the fish a basal diet continuously (control, T0), feeding them YJB (2.5 g/kg) continuously (T1), feeding them YJB for 1 day and the basal diet the next day (T2), and feeding them YJB for 1 day and the basal diet for the following 2 days (T3). No difference in survival among the treatments was found after the 8-week feeding trial (p > 0.05). However, the T1 and T2 groups exhibited significant enhancements in final body weight, weight gain, and specific growth rate compared with the T0 and T3 groups. Furthermore, the T1 and T2 groups showed a significant improvement in feed consumption, feed efficiency, and protein efficiency ratio compared with the T0 and T3 groups. No significant differences in the condition factor or viscerosomatic and hepatosomatic indices were observed among all the groups. Intestinal amylase, trypsin, and lipase activity was significantly (p < 0.05) higher in the T1 and T2 groups than in the T0 and T3 groups. Lysozyme, superoxide dismutase, and catalase activity along with glutathione peroxidase content were significantly (p < 0.05) higher under all YJB feeding regimens than those under the control treatment. The survival rates in all the YJB treatment groups after the S. iniae challenge were significantly (p < 0.05) enhanced. In conclusion, we recommend offering YJB at day-to-day intervals to improve growth performance, digestive enzyme activity, antioxidant status, and disease resistance against S. iniae. Full article

This study aimed to evaluate the efficacy of the aMAP score and compare it with other risk scores for predicting hepatocellular carcinoma (HCC) development in Thai patients with chronic hepatitis B (CHB). We retrospectively analyzed patients with CHB between 1 January 2008 and 31 December 2019. Data on demographics, clinical parameters, cirrhosis status, HCC imaging, and alpha fetoprotein surveillance were collected to calculate the aMAP score (0–100) based on age, sex, albumin–bilirubin level, and platelet count. Of the 1060 patients analyzed, 789 were eligible, of whom 51 developed HCC. The cumulative HCC incidences in the low-, moderate-, and high-risk groups at 3, 5, and 10 years were significantly different (log-rank, p < 0.0001). The area under the receiver operating characteristic curves (AUROCs) of the aMAP scores for predicting HCC at 3, 5, and 10 years were 0.748, 0.777, and 0.784, respectively. Among the risk scores, the CU-HCC score had the highest AUROCs (0.823) for predicting 5-year HCC development. The aMAP score is a valuable tool for predicting HCC risk in Thai patients with CHB and can enhance surveillance strategies. However, its performance is inferior to that of the CU-HCC score, suggesting the need for new predictive tools for HCC surveillance. Full article

Cancer-associated cachexia is a multifactorial syndrome characterised by systemic inflammation and hypermetabolism that affects different tissues and organs. Is characterised by progressive and irreversible weight loss, mainly due to skeletal muscle wasting and often accompanied by loss of fat mass. Due to its complexity, and lack of effective treatment, this syndrome is a sign of poor prognosis in cancer patients. Cellular models constitute a valuable and powerful tool offering insights into the molecular pathways and cellular responses associated with cancer cachexia. Currently, there are robust and widely used cell lines used to establish models to study the pathophysiology of muscle wasting and adipose tissue loss. Various methods can be used to induce the cachectic phenotype in the cells, utilising genetic engineering or different inducing agents such as hormones, inflammatory factors and chemotherapeutic drugs. The available experimental data on their metabolic properties and transcriptional and proteomic profiles allows the selection of the most suitable research model to replicate the relevant aspects of cachexia. In this review, we make an overview of the in vitro models used to study biological aspects of cancer-associated cachexia and analyse their strengths and limitations in replicating the complex physiological environment and pathological processes of the syndrome. Herein, we also briefly approach the difficulty of modelling the contribution of different organs and crosstalk between different tissues. Full article

Female infertility constitutes a growing health problem in developing countries and could be associated with several possible causes including reproductive disorders, congenital malformations, infections and hormonal dysfunction. Nonetheless, a series of additional factors can also negatively impact female fertility and are represented by chronic exposure to environmental pollutants, stress, unhealthy lifestyle choices such as cigarette smoking and, among others, obesity. Excess weight is associated with several chronic diseases, and growing evidence demonstrates that it can compromise reproductive physiology due to its influence on endometrial gene expression and receptivity. Thus, the current review of the literature mainly focused on how obesity can impair uterine receptivity, mostly from a molecular point of view throughout the window of implantation (WOI) period at an endometrial level. It was also highlighted that an obesity-related increase in adipose tissue may lead to a modulation in the expression of multiple pathways, which could cause a hostile endometrial environment with a consequent negative impact on the uterine receptivity and the establishment of pregnancy. Thanks to the use of the endometrial receptivity assay (ERA), a specific microarray that studies the expression of a series of genes, it is now possible to evaluate the endometrial status of patients with infertility problems in a more detailed manner. Moreover, female fertility and endometrial receptivity could be affected by endometriosis, a chronic benign gynecological disease, whose cause-and-effect relationship to obesity is still uncertain. Therefore, further investigations would be required to better elucidate these mechanisms that govern embryo implantation and could be potentially useful for the generation of new strategies to overcome implantation failure and improve the pregnancy rates in obese women. Full article

Keeping wounds clean in small animals is a big challenge, which is why they often become infected, creating a risk of transmission to animal owners. Therefore, it is crucial to search for new biocompatible materials that have the potential to be used in smart wound dressings with both wound healing and bacteriostatic properties to prevent infection. In our previous work, we obtained innovative hyaluronate matrix-based bionanocomposites containing nanosilver and nanosilver/graphene oxide (Hyal/Ag and Hyal/Ag/GO). This study aimed to thoroughly examine the bacteriostatic properties of foils containing the previously developed bionanocomposites. The bacteriostatic activity was assessed in vitro on 88 Gram-positive (n = 51) and Gram-negative (n = 37) bacteria isolated from wounds of small animals and whose antimicrobial resistance patterns and resistance mechanisms were examined in an earlier study. Here, 69.32% of bacterial growth was inhibited by Hyal/Ag and 81.82% by Hyal/Ag/GO. The bionanocomposites appeared more effective against Gram-negative bacteria (growth inhibition of 75.68% and 89.19% by Hyal/Ag and Hyal/Ag/Go, respectively). The effectiveness of Hyal/Ag/GO against Gram-positive bacteria was also high (inhibition of 80.39% of strains), while Hyal/Ag inhibited the growth of 64.71% of Gram-positive bacteria. The effectiveness of Hyal/Ag and Hyal/Ag/Go varied depending on bacterial genus and species. Proteus (Gram-negative) and Enterococcus (Gram-positive) appeared to be the least susceptible to the bionanocomposites. Hyal/Ag most effectively inhibited the growth of non-pathogenic Gram-positive Sporosarcina luteola and Gram-negative Acinetobacter. Hyal/Ag/GO was most effective against Gram-positive Streptococcus and Gram-negative Moraxella osloensis. The Hyal/Ag/GO bionanocomposites proved to be very promising new antibacterial, biocompatible materials that could be used in the production of bioactive wound dressings. Full article

Simulating shallow groundwater (SGW) flow dynamics and stream–SGW interactions using numerical modeling tools is necessary to develop a mechanistic understanding of water flow systems and improve confidence in water resource management practices. A three-dimensional (3D) SGW flow model was developed for a riparian wetland in a mixed forest and agricultural catchment in West Virginia (WV), Appalachia, USA, using a Modular 3D Groundwater Model (MODFLOW). The MODFLOW simulation was calibrated in steady (R² = 0.98, ME = −0.21, and RMSE = 0.77), transient state (R² = 0.97, ME = −0.41, and RMSE = 1.28) and validated (R² = 0.97, ME = −0.28, and RMSE = 1.05) using observed SGW levels from thirteen nested piezometers under steady and transient states. An experimental MT3D transport scenario was developed to show the lateral transport of NO₃-N from the aquifer to stream cells. Relatively stable SGW head distribution was observed. In the downstream reach, SGW discharge varied from 948 m³/day to 907 m³/day in 2020, with creek seepage ranging from 802 m³/day to 790 m³/day. Similarly, SGW input to the stream ranged from 891 m³/day to 978 m³/day, while creek seepage ranged from 796 m³/day to 800 m³/day in 2021. In upstream reaches, losing stream conditions were observed in January, June, and September 2020 and January to April 2021, while gaining stream conditions prevailed during other months. Thus, an approximately monthly alternating gaining–losing stream condition was observed in the upstream area. An experimental MT3D transport scenario resulted in an advection–dispersion scenario, showing a cumulative loss of 947 g of NO₃-N from SGW to the stream. Denitrification accounted for the cumulative loss of 1406 g of NO₃-N from SGW, surpassing 639 g of nitrate from the SGW to the stream during the study period. Additionally, particle tracking using MODPATH indicated a long residence time for SGW nutrients, affirming the efficiency of nitrogen transformation through denitrification. This study is among the first to simulate hydrologic and nutrient interactions in riparian wetlands of a mixed land use catchment in the Appalachian region of the northeastern United States. The results better inform water resource management decisions and modeling efforts in the Appalachian region and similar physiographic regions globally. Full article

Lithium-ion batteries, as the main energy storage component of electric vehicles (EVs), play a crucial role in ensuring the safe and reliable operation of the battery systems through monitoring their state of health (SOH). However, temperature variations and battery aging have significant impacts on the internal parameters of lithium-ion batteries, and these changes directly correlate with the accuracy of battery SOH estimation. To address these issues, this paper proposes an estimation method for lithium-ion battery SOH that considers the impact of temperature. The method begins with reconstructing a second-order hybrid equivalent circuit model for lithium-ion batteries, through which an adaptive update rate for battery model parameters is designed. On this basis, a nonlinear observer for battery states is introduced by integrating filters to estimate SOH. The proposed method considers the impact of capacity in the design of the parameter adaptive update rate, enabling the capacity to be dynamically adjusted based on the actual state of the batteries. This reduces the cumulative error in the SOC observer and improves the modeling accuracy of battery models. Experimental results demonstrate that the method proposed in this paper exhibits exceptional performance in SOH estimation under different temperature conditions. The mean absolute error for SOH estimation does not exceed 0.5%, and the root mean square error does not exceed 0.2%. This method can significantly improve the estimation accuracy of SOH, providing a more efficient and accurate solution for battery management systems in EVs. Full article

As one of the most important food crops in the world, rice yield is directly related to national food security. Lodging is one of the most important factors restricting rice production, and the cultivation of rice varieties with lodging resistance is of great significance in rice breeding. The lodging resistance of rice is directly related to the mechanical strength of the stalks. In this paper, we reviewed the cell wall structure, its components, and its genetic regulatory mechanism, which improved the regulatory network of rice stalk mechanical strength. Meanwhile, we analyzed the new progress in genetic breeding and put forward some scientific problems that need to be solved in this field in order to provide theoretical support for the improvement and application of rice breeding. Full article

Volatile organic compounds (VOCs) are a class of hazardous gases that are widely present in the atmosphere and cause great harm to human health. In this paper, a ratiometric fluorescent probe (Dye@Eu-MOFs) based on a dye-functionalized metal–organic framework was designed to detect VOCs, which showed high sensitivity and specificity for acetaldehyde solution and vapor. A linear correlation between the integrated fluorescence intensity (I₅₁₀/I₆₁₆) and the concentration of acetaldehyde was investigated, enabling a quantitative analysis of acetaldehyde in the ranges of 1 × 10⁻⁴~10⁻⁵ μL/mL, with a low detection limit of 8.12 × 10⁻⁴ mg/L. The selective recognition of acetaldehyde could be clearly distinguished by the naked eye under the excitation of UV light. The potential sensing mechanism was also discussed. Significantly, a molecular logic gate was constructed based on the whole system, and finally, a molecular logic network system for acetaldehyde detection connecting basic and integrated logic operations was realized. This strategy provided an effective guiding method for constructing a molecular-level logic gate for acetaldehyde detection on a simple platform. Full article

Biopolymers from renewable materials are promising alternatives to the traditional petroleum-based plastics used today, although they face limitations in terms of performance and processability. Natural fillers have been identified as a strategic route to create sustainable composites, and natural fillers in the form of waste by-products have received particular attention. Consequently, the primary focus of this article is to offer a broad overview of recent breakthroughs in environmentally friendly Polhydroxyalkanoate (PHA) polymers and their composites. PHAs are aliphatic polyesters obtained by bacterial fermentation of sugars and fatty acids and are considered to play a key role in addressing sustainability challenges to replace traditional plastics in various industrial sectors. Moreover, the article examines the potential of biodegradable polymers and polymer composites, with a specific emphasis on natural composite materials, current trends, and future market prospects. Increased environmental concerns are driving discussions on the importance of integrating biodegradable materials with natural fillers in our daily use, emphasizing the need for clear frameworks and economic incentives to support the use of these materials. Finally, it highlights the indispensable need for ongoing research and development efforts to address environmental challenges in the polymer sector, reflecting a growing interest in sustainable materials across all industries. Full article

In the context of global efforts to transition toward renewable energy and reduce greenhouse gas emissions, geothermal energy is increasingly recognized as a viable and sustainable option. This paper presents a comprehensive assessment derived from a subset of a larger sample collection within the Dunántúli Group of the Pannonian Basin, Hungary, focusing on optimizing micro-computed tomography (µ-CT) resolution for analyzing pore structures in sandstone formations. By categorizing samples based on geological properties and selecting representatives from each group, the study integrates helium porosity and gas permeability measurements with µ-CT imaging at various resolutions (5 µm, 2 µm, and 1 µm). The findings reveal that µ-CT resolution significantly affects the discernibility and characterization of pore structures. Finer resolutions (2 µm and 1 µm) effectively uncovered interconnected pore networks in medium- to coarse-grained sandstones, suggesting favorable properties for geothermal applications. In contrast, fine-grained samples showed limitations in geothermal applicability at higher resolutions due to their compact nature and minimal pore connectivity, which could not be confidently imaged at 1 µm. Additionally, this study acknowledges the challenges in delineating the boundaries within the Dunántúli Group formations, which adds a layer of complexity to the characterization process. The research highlights the importance of aligning µ-CT findings with geological backgrounds and laboratory measurements for accurate pore structure interpretation in heterogeneous formations. By contributing vital petrophysical data for the Dunántúli Group and the Pannonian Basin, this study provides key insights for selecting appropriate µ-CT imaging resolutions to advance sustainable geothermal energy strategies in the region. The outcomes of this research form the basis for future studies aimed at developing experimental setups to investigate physical clogging and enhance geothermal exploitation methods, crucial for the sustainable development of geothermal resources in the Pannonian Basin. Full article