Search Results (1,060)

In studying the effects of oxygen concentration and molecular structure on the morphologies of the soot particles produced by hydrocarbon fuels, ethylene and ethane were chosen as experimental fuels. With a Gülde laminar coaxial diffusion flame device, a soot particle device was used to sample soot particles at different oxygen concentrations (21%, 24%, 26%, 28%, and 31%) and at different heights above a burner (HABs = 10 mm, 20 mm, 30 mm, 40 mm, and 50 mm). High-resolution transmission electron microscopy (HRTEM) was used to scrutinize and analyze the soot particles at varying oxygen concentrations. The findings suggest that at the same oxygen concentration, ethylene produces brighter and taller flames. With an increase in the oxygen concentration, ethylene flames and ethane flames gradually decrease in height and become brighter. With an increase in the HAB, the average primary soot particle diameter (D_p) increases initially and then decreases, the fractal dimension (D_f) increases, and the aggregates transition from strips and chains to clusters. At the same flame height (HAB = 30 mm), the D_p decreases, the D_f increases, the carbon layer torsion resistance (T_f) and the carbon layer spacing (D_s) increase, and the carbon layer changes from a parallel arrangement to a curved arrangement to form denser network aggregations. Full article

In this study, magnetic copper ferrite (CuFe₂O₄) nanoparticles were synthesized via the Pechini sol-gel method and evaluated for the removal of Cd(II) ions from aqueous solutions. PF600 and PF800 refer to the samples that were synthesized at 600 °C and 800 °C, respectively. Comprehensive characterization using FTIR, XRD, FE-SEM, HR-TEM, and EDX confirmed the successful formation of CuFe₂O₄ spinel structures, with crystallite sizes of 22.64 nm (PF600) and 30.13 nm (PF800). FE-SEM analysis revealed particle diameters of 154.98 nm (PF600) and 230.05 nm (PF800), exhibiting spherical and irregular shapes. HR-TEM analysis further confirmed the presence of aggregated nanoparticles with average diameters of 52.26 nm (PF600) and 98.32 nm (PF800). The PF600 and PF800 nanoparticles exhibited exceptional adsorption capacities of 377.36 mg/g and 322.58 mg/g, respectively, significantly outperforming many materials reported in the literature. Adsorption followed the Langmuir isotherm model and pseudo-second-order kinetics, indicating monolayer adsorption and strong physisorption. The process was spontaneous, exothermic, and predominantly physical. Reusability tests demonstrated high adsorption efficiency across multiple cycles when desorbed with a 0.5 M ethylenediaminetetraacetic acid (EDTA) solution, emphasizing the practical applicability of these nanoparticles. The inherent magnetic properties of CuFe₂O₄ facilitated easy separation from the aqueous medium using a magnet, enabling efficient and cost-effective recovery of the adsorbent. These findings highlight the potential of CuFe₂O₄ nanoparticles, particularly PF600, for the effective and sustainable removal of Cd(II) ions from water. Full article

In this study, we successfully synthesized a Pd-doped SnO₂ (Pd-SnO₂) material with a flower-like hierarchical structure using the solvothermal method. The material’s structural proper-ties were characterized employing techniques such as XRD, XPS, FESEM and HRTEM. A gas sensor fabricated from the 2.0 mol% Pd-SnO₂ material demonstrated exceptional sensitivity (R_a/R_g = 106) to 100 ppm ethanolamine at an operating temperature of 150 °C, with rapid response/recovery times of 10 s and 12 s, respectively, along with excellent linearity, selectivity, and stability, and a detection limit down to 1 ppm. The superior gas-sensing performance is attributed to the distinctive flower-like hierarchical architecture of the Pd-SnO₂ and the lattice distortions introduced by Pd doping, which substantially boost the material’s sensing characteristics. Further analysis using density functional theory (DFT) has revealed that within the Pd-SnO₂ system, Sn exhibits strong affinities for O and N, leading to high adsorption energies for ethanolamine, thus enhancing the system’s selectivity and sensitivity to ethanolamine gas. This research introduces a novel approach for the efficient and rapid detection of ethanolamine gas. Full article

Furfural is a well-recognized biomass platform. Hydrogenation and reductive amination of furfural are two principal routes in the valorization of this compound. In both reactions, the presence of reducible species (SMSI effect) and acid sites could favor the selectivity toward some interesting products. Both conditions could be obtained using metal particles supported on reducible mixed oxides. In this work, we investigate the use of Pt/Nb₂O₅-Al₂O₃ catalysts for the hydrogenation and reductive amination of furfural at distinct Nb₂O₅ contents. A decaniobate salt was used as a precursor of Nb₂O₅. The solids were reduced at 500 °C to assure the migration of reducible NbO_x species. The solids were characterized by XRD, Raman spectroscopy, HR-TEM, N₂-physisorption, NH₃-TPD and Pyr-DRIFTS. The results showed that higher Nb₂O₅ loadings led to a lower distribution of Al₂O₃ and Pt, favoring the catalysts’ acidity. This fact implies that large particle size and the presence of Nb₂O₅ islands favor the formation of furfuryl alcohol but have a detrimental effect on the amine formation in the reductive amination of furfural. Full article

To address issues of global energy sustainability, it is essential to develop highly efficient bifunctional transition metal-based electrocatalysts to accelerate the kinetics of both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). Herein, the heterogeneous molybdenum and vanadium codoped cobalt carbonate nanosheets loaded on nickel foam (VMoCoCOx@NF) are fabricated by facile hydrothermal deposition. Firstly, the mole ratio of V/Mo/Co in the composite is optimized by response surface methodology (RSM). When the optimized composite serves as a bifunctional catalyst, the water-splitting current density achieves 10 mA cm⁻² and 100 mA cm⁻² at cell voltages of 1.54 V and 1.61 V in a 1.0 M KOH electrolyte with robust stability. Furthermore, characterization is carried out using field emission scanning electron microscopy-energy dispersive spectroscopy (FESEM-EDS), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Density functional theory (DFT) calculations reveal that the fabricated VMoCoCOx@NF catalyst synergistically decreases the Gibbs free energy of hydrogen and oxygen-containing intermediates, thus accelerating OER/HER catalytic kinetics. Benefiting from the concerted advantages of porous NF substrates and clustered VMoCoCOx nanosheets, the fabricated catalyst exhibits superior electrocatalytic performance. This work presents a novel approach to developing transition metal catalysts for overall water splitting. Full article

In a quest to vet UNS S32205 as a potential structural material to serve moderate-to-high temperature operations of NPP auxiliary components, the DL-EPR test was exploited. A bifronted scheme comprised of 650 and 850 °C discrete treatments intended to explore progressive eutectoid decomposition and degree-of-sensitization (DoS) scenarios was adopted. The nuance witnessed with yet another dual approach—the Cihal- and image processing (IP)-normalized signal landscape—was rationalized through its attribution to culprit microstructures. This was sought, inter alia, in the vicinity of grain boundaries and σ-phase inclusions by virtue of postmortem FESEM, STEM-EDX, HRTEM SAED and XRD ascertainment. Discernable reactivation-kinetics resurgence was believed to mark the onset of deleterious σ-phase dissolution. This only came into fruition with longer ageing times (8–17 h) at 650 °C and succumbed to prematurely (1 h), and at DC biases more cathodic than −0.25 VAg/AgCl with the 850 °C counterpart. Opportune corroboration was offered in i_r/i_a breakaway for the respective conditions, which was unveiled to be particularly pre-emptive (5 h) with IP- vs. Cihal-normalized peers (8 h) related to the 650 °C condition. Meanwhile, the 850 °C condition endured a similar surge after as little as 1 h of ageing across the board, which hints at concomitant sigma-phase culpability. Full article

Copper-based catalysts are widely used in methanol steam reforming to produce hydrogen. In this paper, the supportive effect of the crystal phase of ZrO₂ on Cu-based catalysts in methanol steam reforming is discussed. Monoclinic(m-), Tetragonal(t-) and mixed ZrO₂ phases were prepared, and structure–activity relationships were investigated with XRD, H₂-TPR, BET, HR-TEM and XPS. It was found that the catalyst with a 81.4% monoclinic ZrO₂ crystal phase exhibited the highest methanol conversion (88.5%) and the highest hydrogen production rate (104.6 μmol/g_cat·s) at 275 °C as it displayed the best reducing properties and more oxygen vacancies on the catalyst surface. Oxygen vacancies can produce more Cu¹⁺ + Cu⁰, which is the active species for methanol steam reforming on the catalyst surface, and therefore affect catalytic activity. Full article

This paper studies the synthesis, characterization, and application of ZnFe₂O₄ nanoparticles for the removal of rhodamine b dye from aqueous media. Utilizing the combustion procedure, ZnFe₂O₄ nanoparticles were synthesized using two different fuels: glutamine (SG) and L-arginine (SA). In addition, the synthesized ZnFe₂O₄ nanoparticles were characterized through various techniques, including Fourier transform infrared (FTIR), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), energy-dispersive X-ray (EDX), high resolution transmission electron microscope (HR-TEM), and Brunauer-Emmett-Teller (BET) surface area analysis. XRD analysis verified the creation of a ZnFe₂O₄ cubic spinel structure without any contaminants, revealing average crystallite sizes of 43.72 and 29.38 nm for the SG and SA samples, respectively. The FTIR spectra exhibited peaks indicative of metal-oxygen bond stretching, verifying the presence of a spinel formation. Elemental analysis via EDX confirmed the stoichiometric composition typical of zinc ferrite. In addition, FE-SEM imaging displayed that the SG and SA samples are composed of particles with irregular and spherical shapes, measuring average diameters of 135.11 and 59.89 nm, respectively. Furthermore, the BET surface area of the SG and SA samples is 60 and 85 m²/g, respectively. The maximum adsorption capacity of the SA sample (409.84 mg/g) towards rhodamine b dye was higher than that of the SG sample (279.33 mg/g), which was ascribed to its larger surface area and porosity. Kinetic and equilibrium studies revealed that the adsorption process of rhodamine b dye onto the SG and SA samples followed the Langmuir isotherm and pseudo-second-order model. Thermodynamic analysis indicated that the adsorption process was spontaneous, exothermic, and physical. The study concludes that ZnFe₂O₄ nanoparticles synthesized using L-arginine (SA) exhibit enhanced rhodamine b dye removal efficiency due to their smaller size, increased surface area, and higher porosity compared to those synthesized with glutamine (SG). The optimum conditions for the adsorption process of rhodamine b dye were found to be at pH 10, a contact time of 70 min, and a temperature of 298 K. These findings underscore the potential of L-arginine-synthesized ZnFe₂O₄ nanoparticles for effective and sustainable environmental cleanup applications. Full article

Inspired by our finding that metallic Ni particles could be uniformly distributed on a reduced CeO₂ surface and stabilized on Ce³⁺ sites, we suppose a possible improvement in the activity and selectivity of the MgNi/SiO₂ vegetable oil hydrogenation catalyst by increasing the surface metal Ni availability via modification by ceria. The proposed approach involved the addition of a CeO₂ modifier to the SiO₂ carrier and as a catalyst component. Evaluation of the structure, reducibility, and surface and electronic states of the CeO₂-doped MgNi/SiO₂ catalyst was performed by means of the Powder X-ray diffraction (PXRD), Scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), and X-ray photoelectron spectroscopy (XPS) combined with High-resolution transmission electron microscopy (HRTEM), Temperature-programmed reduction with hydrogen (H2-TPR), and H₂-chemisortion techniques. So far, no studies related to this approach of designing Ni/SiO₂ catalysts for the partial hydrogenation of vegetable oil have been reported. The added ceria impact was elucidated by comparing fatty acid compositions obtained by the catalysts at an iodine value of 80. In summary, tuning the hydrogenation performance of Ni-based catalysts can be achieved by structural reconstruction using 1 wt.% CeO₂. The introduction mode changed the selectivity towards C18:1-cis and C18:0 fatty acids by applying ceria as a carrier modifier, while hydrogenation activity was improved upon ceria operation as the catalyst dopant. Full article

Macroalgae seaweeds such as Ulva lactuca and Gracilaria verrucosa cause problems on the northern coast of the Italian Adriatic Sea because their overabundance hinders the growth of cultivated clams, Rudatapes philippinarum. This study focused on the green synthesis of CuO nanoparticles from U. lactuca and G. verrucosa. The biosynthesized CuO NPs were successfully characterized using FTIR, XRD, HRTEM/EDX, and zeta potential. Nanoparticles from the two different algae species are essentially identical, with the same physical characteristics and almost the same antimicrobial activities. We have not investigated the cause of this identity, but it seems likely to arise from the reaction of Cu with the same algae metabolites in both species. The study demonstrates that it is possible to obtain useful products from these macroalgae through a green synthesis approach and that they should be considered as not just a cause of environmental and economic damage but also as a potential source of income. Full article

Smart Nano-enabled Antiviral Therapeutic (SNAT) is a promising nanodrug that previously demonstrated efficacy in preclinical studies to alleviate SARS-CoV-2 pathology in hamsters. SNAT comprises taxoid (Tx)-decorated amino (NH₂)-functionalized near-atomic size positively charged silver nanoparticles (Tx–[NH₂-AgNPs]). Herein, we aimed to elucidate the molecular mechanism of the viral inhibition and safety of aerosolized SNAT treatment in SARS-CoV-2-infected golden Syrian hamsters. High-resolution transmission electron microscopy (HR-TEM) coupled with energy dispersive spectroscopy (EDS) and ELISAs showed SNAT binds directly to the SARS-CoV-2 virus by interacting with intact spike (S) protein, specifically to S2 subunit. SNAT (≥1 µg/mL) treatment significantly lowered SARS-CoV-2 infections of Calu-3 cells. Extraction-free whole transcriptome assay was used to detect changes in circulatory micronome in hamsters treated intranasally with SNAT (two doses of 10 µg/mL of 2 mL each administered 24 h apart). Uninfected hamsters treated with SNAT had altered circulatory concentrations of 18 microRNAs (8 miRNAs upregulated, 10 downregulated) on day 3 post-treatment compared to uninfected controls. SNAT-induced downregulation of miR-141-3p and miR-200b-3p may reduce viral replication and inflammation by targeting Ythdf2 and Slit2, respectively. Further, SNAT treatment significantly lowered IL-6 expression in infected hamster lungs compared to untreated infected hamsters. Taken together, we demonstrate that SNAT binds directly to SARS-CoV-2 via the S protein to prevent viral entry and propose a model by which SNAT alters the cellular miRNA-directed milieu to promote antiviral cellular processes and neutralize infection. Our results provide insights into the use of low-dose intranasally delivered SNAT in treating SARS-CoV-2 infections in a hamster model. Full article

Carbon dots (CDs) have emerged as a promising class of carbon-based nanomaterials due to their unique properties and versatile applications. Carbon dots (CDs), also known as carbon quantum dots (CQDs) or graphene quantum dots (GQDs), are nanoscale carbon-based materials with dimensions typically less than 10 nanometers. They exhibit intriguing optical, electronic, and chemical properties, making them attractive for a wide range of applications, including sensing, imaging, catalysis, and energy conversion, among many others. Both bottom-up and top-down synthesis approaches are utilized for the synthesis of carbon dots, with each method impacting their physicochemical characteristics. Carbon dots can exhibit diverse structures, including amorphous, crystalline, or hybrid structures, depending on the synthesis method and precursor materials used. CDs have diverse chemical structures with modified oxygen, polymer-based, or amino groups on their surface. These structures influence their optical and electronic properties, such as their photoluminescence, bandgap, and charge carrier mobility, making them tunable for specific applications. Various characterization methods such as HRTEM, XPS, and optical analysis (PL, UV) are used to determine the structure of CDs. CDs are cutting-edge fluorescent nanomaterials with remarkable qualities such as biocompatibility, low toxicity, environmental friendliness, high water solubility, and photostability. They are easily adjustable in terms of their optical properties, making them highly versatile in various fields. CDs find applications in bio-imaging, nanomedicine, drug delivery, solar cells, photocatalysis, electrocatalysis, and other related areas. Carbon dots hold great promise in the field of solar cell technology due to their unique properties, including high photoluminescence, high carbon quantum yield (CQY), and excellent charge separation. Full article

Herein, we prepare MoS₂ and Cu-MoS₂ catalysts using the solvothermal method, a widely accepted technique for electrocatalytic overall water-splitting applications. TEM and SEM images, standard tools in materials science, provide a clear view of the morphology of Cu-MoS₂. HRTEM analysis, a high-resolution imaging technique, confirms the lattice spacing, lattice plane, and crystal structure of Cu-MoS₂. HAADF and corresponding color mapping and advanced imaging techniques reveal the existence of the Cu-doping, Mo, and S elements in Cu-MoS₂. Notably, Cu plays a crucial role in improving the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) of the Cu-MoS₂ catalyst as compared with the MoS₂ catalyst. In addition, the Cu-MoS₂ catalyst demonstrates significantly lower overpotential (167.7 mV and 290 mV) and Tafel slopes (121.5 mV dec⁻¹ and 101.5 mV dec⁻¹), standing at −10 mA cm⁻² and 10 mA cm⁻² for HER and OER, respectively, compared to the MoS₂ catalyst. Additionally, the Cu-MoS₂ catalyst displays outstanding stability for 12 h at −10 mA cm⁻² of HER and 12 h at 10 mA cm⁻² of OER using chronopotentiaometry. Interestingly, the Cu-MoS₂‖Cu-MoS₂ cell displays a lower cell potential of 1.69 V compared with the MoS₂‖MoS₂ cell of 1.81 V during overall water splitting. Moreover, the Cu-MoS₂‖Cu-MoS₂ cell shows excellent stability when using chronopotentiaometry for 18 h at 10 mA cm⁻². Full article

Monodisperse and semi-faceted ultra-small templated mesoporous silica nanoparticles (US-MSNs) of 20–25 nm were synthesized using short-time hydrolysis of tetraethoxysilane (TEOS) at room temperature, followed by a dilution for nucleation quenching. According to dynamic light scattering (DLS), a two-step pH adjustment was necessary for growth termination and colloidal stabilization. The pore size was controlled by cetyltrimethylammonium bromide (CTAB), and a tiny amount of neutral surfactant F127 was added to minimize the coalescence between US-MSNs and to favor the transition towards internal ordering. Flocculation eventually occurred, allowing us to harvest a powder by centrifugation (~60% silica yield after one month). Scanning transmission electron microscopy (STEM) and 3D high-resolution transmission electron microscopy (3D HR-TEM) images revealed that the US-MSNs are partially ordered. The 2D FT transform images provide evidence for the coexistence of four-, five-, and sixfold patterns characterizing an “on-the-edge” crystallization step between amorphous raspberry and hexagonal pore array morphologies, typical of a protocrystalline state. Calcination preserved this state and yielded a powder characterized by packing, developing a hierarchical porosity centered at 3.9 ± 0.2 (internal pores) and 68 ± 7 nm (packing voids) of high potential for support for separation and catalysis. Full article

Fe contamination has always been one of the most critical issues in the integrated circuit (IC) industry due to its catastrophic effect on device reliability and electrical characteristics. With complementary metal oxide semiconductor (CMOS) technology scaling down, this issue has been attracting more attention. In this paper, the impact of Fe impurity on the reliability of gate oxide integrity (GOI) in advanced CMOS technology is investigated. Intentional contamination of polysilicon gates was conducted in both boron- and phosphorus-doped devices. Failure analysis of the gate oxide was conducted with high-resolution transmission electron microscopy (HRTEM) and the energy dispersive X-ray (EDX) technique. The experimental results disclose that the properties of PMOS are much more sensitive to Fe contamination than those of NMOS. It is suggested that the reason for the above phenomena is that Fe precipitates at the PMOS gate/oxide interface but dissolves uniformly in the NMOS poly gate due to lower formation energy of the FeB pair (0.65 eV) in PMOS than that of the P4-Fe cluster (3.2 eV) in NMOS. Full article