Search Results (4,802)

Antibiotic-resistant microorganisms have become a serious threat to public health, resulting in hospital infections, the majority of which are caused by commonly used urinary tract catheters. Strategies for preventing bacterial adhesion to the catheters’ surfaces have been potentially shown as effective methods, such as coating thesurface with antimicrobial biomolecules. Here, novel antimicrobial peptides (AMPs) were designed as potential biomolecules to prevent antibiotic-resistant bacteria from binding to catheter surfaces. Thiolated AMPs were synthesized using solid-phase peptide synthesis (SPPS), and prep-HPLC was used to obtain AMPs with purity greater than 90%. On the other side, the silicone catheter surface was activated by UV/ozone treatment, followed by functionalization with allyl moieties for conjugation to the free thiol group of cystein in AMPs using thiol-ene click chemistry. Peptide-immobilized surfaces were found to become more resistant to bacterial adhesion while remaining biocompatible with mammalian cells. The presence and site of conjugation of peptide molecules were investigated by immobilizing them to catheter surfaces from both ends (C-Pep and Pep-C). It was clearly demonstrated that AMPs conjugated to the surface via theirN terminus have a higher antimicrobial activity. This strategy stands out for its effective conjugation of AMPs to silicone-based implant surfaces for the elimination of bacterial infections. Full article

Hydrotalcite exhibits the capability to adsorb CO₂ at elevated temperatures. High surface area and favorable coating properties are essential to harness its potential for practical applications. Stable alcohol-based dispersions are needed for thin film applications of mixed membranes containing hydrotalcite. Currently, producing such dispersions without the need for delamination and dispersing agents is a challenging task. This work introduces, for the first time, a manufacturing approach to overcoming the drawbacks mentioned above. It includes a synthesis of hydrotalcite nanoparticles, followed by agent-free delamination of their layers and final dispersion into alcohol without dispersing agents. Further, the hydrotalcite-derived sorption agent is dispersed in a matrix based on organo-silica gels derived from 1,2-bis(triethoxysilyl)ethane (BTESE). The analytical results indicate that the interconnection between hydrotalcite and BTESE-derived gel occurs via forming a strong hydrogen bonding system between the interlayer species (OH groups, CO₃²⁻) of hydrotalcite and oxygen and silanol active gel centers. These findings lay the foundation for applications involving incorporating hydrotalcite-like compounds into silica matrices, ultimately enabling the development of materials with exceptional mass transfer properties. In part 2 of this study, the gas separation performance of the organo-silica and the hydrotalcite-like materials and their combined form will be investigated. Full article

The skin is the largest organ in the human body and serves multiple functions such as barrier protection and thermoregulation. The maintenance of its integrity and healthy structure is of paramount importance. Accordingly, technological advances in cosmetic sciences have been directed towards optimizing these factors. Plant-derived ingredients have been explored for their bioactivity profiles and sustainable sources. Grape by-products contain a group of bioactive molecules that display important biological activities. Nonetheless, many of these molecules (e.g., phenolic compounds) are unstable and susceptible to degradation. So, their encapsulation using nano/microsystems (i.e., microdispersions) has been explored as a promising solution. In this work, two grape seed extracts were obtained, one from a single grape variety (GSE-Ov) and another from a mix of five grape varieties (GSE-Sv). These extracts were analysed for their antioxidant and antimicrobial activities, as well as their chemical composition and molecular structure. The extract that showed the most promising properties was GSE-Ov with a DPPH IC₅₀ of 0.079 mg mL⁻¹. This extract was encapsulated in soy lecithin microdispersions coated with pectin, with an encapsulation efficiency of 88.8%. They showed an in vitro release of polyphenols of 59.4% during 24 h. The particles displayed a zeta potential of −20.3 mV and an average diameter of 13.6 µm. Microdispersions proved to be safe under 5 and 2.5 mg mL⁻¹ in HaCaT and HDF cell models, respectively. Additionally, they demonstrated anti-inflammatory activity against IL-1α when tested at 2 mg mL⁻¹. This work enabled the valorisation of a by-product from the wine industry by using natural extracts in skincare products. Full article

The treatment of bone defects caused by disease or accidents through the use of implants presents significant clinical challenges. After clinical implantation, these materials attract and accumulate bacteria and hinder the integration of the implant with bone tissue due to the lack of osteoinductive properties, both of which can cause postoperative infection and even lead to the eventual failure of the operation. This work successfully prepared a novel biomaterial coating with multiple antibacterial mechanisms for potent and durable and osteoinductive biological tissue replacement by pulsed PED (electrochemical deposition). By effectively regulating PPy (polypyrrole), the uniform composite coating achieved sound physiological stability. Furthermore, the photothermal analysis showcased exceptional potent photothermal antibacterial activity. The antibacterial assessments revealed a bacterial eradication rate of 100% for the PPy@Cu/PD composite coating following a 24 h incubation. Upon the introduction of NIR (near-infrared) irradiation, the combined effects of multiple antibacterial mechanisms led to bacterial reduction rates of 99% for E. coli and 98% for S. aureus after a 6 h incubation. Additionally, the successful promotion of osteoblast proliferation was confirmed through the application of the osteoinductive drug PD (pamidronate disodium) on the composite coating’s surface. Therefore, the antimicrobial Ti-based coatings with osteoinductive properties and potent and durable antibacterial properties could serve as ideal bone implants. Full article

In urban environments, various pollutants generated by road traffic, human, and industrial activities degrade outdoor and indoor air quality. Among these pollutants, nitrogen oxides (NOx) are subject to air quality regulations designed to protect human health and the environment. It is therefore crucial to keep their concentration as low as possible. Advanced oxidation processes are a practical choice for the degradation of NOx; among them, heterogeneous photocatalysis has proven to be a viable route. However, while the efficiency of this process has been widely demonstrated on a laboratory scale, it is still the subject of debate for real-life applications. The purpose of this study was to present a new field experiment on the application of a photocatalytic coating to outdoor walls. Air quality monitoring stations were used to evaluate the NOx concentration reduction instead of the chemiluminescent analyzer, in order to increase the number of sampling points. Statistical analysis was carried out to interpret the results. Density probability functions were plotted and showed a positive impact of the coating, leading to lower NOx concentrations. This work was completed by a laboratory-scale assessment of the coating’s durability using abrasion, QUV, and immersion/drying tests. The air depollution capacity of the chosen coating was significantly reduced after QUV testing. Full article

Mesoporous silica nanoparticles (MSNs) are promising drug carriers for cancer therapy. Their functionalization with ligands for specific tissue/cell targeting and stimuli-responsive cap materials for sealing drugs within the pores of MSNs is extensively studied for biomedical and pharmaceutical applications. The objective of the present work was to establish MSNs as ideal nanocarriers of anticancer drugs such as 5-FU and silymarin by exploiting characteristics such as their large surface area, pore size, and biocompatibility. Furthermore, coating with various biopolymeric materials such as carboxymethyl chitosan–dopamine and hyaluronic acid–folic acid on their surface would allow them to play the role of ligands in the process of active targeting to tumor cells in which there is an overexpression of specific receptors for them. From the results obtained, it emerged, in fact, that these hybrid nanoparticles not only inhibit the growth of glioblastoma and breast cancer cells, but also act as pH-responsive release systems potentially useful as release vectors in tumor environments. Full article

The preservation of meat via sustainable methods and packaging is an area of continued interest driven by the need to address food security. The use of biomaterial films and coatings has gained significant attention due to their non-toxicity and biodegradability compared with conventional synthetic films. Starch and chitosan are sustainable sources for the preparation of films/coatings owing to their relatively low cost, natural abundance derived from numerous sources, biocompatibility, biodegradability, and antimicrobial, antioxidant, and film-forming attributes. These remarkable features have notably increased the shelf life of meat by inhibiting lipid oxidation and microbial activity in food products. Furthermore, recent studies have successfully incorporated binary biopolymer (starch and chitosan) systems to combine their beneficial properties upon composite formation. This literature review from 2020 to the present reveals that chitosan- and starch-based films and coatings have potential to contribute to enhanced food security and safety measures whilst reducing environmental issues and improving sustainability, compared with conventional synthetic materials. Full article

Agrochemicals can now be protected from harsh environments like pH, light, temperature, and more with the help of a drug-loading system. This has allowed the creation of targeted and continuous release functions for pesticides and fertilizers, as well as the precise application, reduction, and efficiency of agrochemicals. All of these benefits have been made possible by the recent advancements in the field of nanomaterials. A simple procedure known as electrospinning can be used to create nanofibers from natural and synthetic polymers. Nanofibers have come to be recognized as one of the sustainable routes with enormous applicability in different fields. In agriculture, a promising strategy may entail plant protection and growth through the encapsulating of numerous bio-active molecules as pesticides and fertilizers for intelligent administration at the desired places. Owing to their permeability, tiny dimensions, and large surface area, nanofibers can regulate the rate at which agrochemicals are released. This slows down the rate at which the fertilizer dissolves and permits the release of coated fertilizer gradually over time, which is more effectively absorbed by plant roots, as well as the efficiency of pesticides. Thus, modern agriculture requires products and formulations that are more efficient and environmentally friendly than traditional agrochemicals. In addition to highlighting the significance and originality of using nanofibers and offering a brief explanation of the electrospinning technology, the review article’s main goal is to provide a thorough summary of the research leading to breakthroughs in the nanoencapsulation of fertilizers and pesticides. Full article

The woolly apple aphid—WAA (Eriosoma lanigerum Hausmann, 1802) poses a significant threat to intensive apple production. Given the limitations of conventional synthetic pesticides, there is an urgent need for effective and sustainable pest management strategies. Botanical extracts derived from plants with insecticidal properties mitigating aphid populations without adverse environmental impacts are scarce where WAA is concerned. Thus, the pertinent study aimed to investigate the aphicidal potential of Koelreuteria paniculata seed ethanolic extract (derived from the seed coat) and mechanically extracted oil (derived from the seed itself). At concentrations of 2.5% and 5%, both solutions expressed undeniable insecticidal potential, providing absolute (100%; oil) or significant (86–100%; ethanolic extract) mortality rates both in vivo and in vitro. Predominant phenolic compounds determined in the ethanolic extract were gallic and protocatechuic acids and three derivates—p-coumaric, quercetin, and luteolin acid derivates—contributing to more than 90% of the total phenolic content, while phenolic compounds were not detected in the oil, indicating activity of different active compounds. Although deriving from different seed parts and distinct extraction methods, both ethanolic extract and oil exhibited significant aphicidal effects against WAA. The integration of botanical extracts from invasive species into pest management practices supports ecological balance and sustainable agricultural productivity, fostering a healthier environment and more resilient agricultural systems. Full article

In this paper, we present an optimization of the planar manufacturing scheme for stretch-free, shape-induced metal interconnects to simplify fabrication with the aim of maximizing the flexibility in a structure regarding stress and strain. The formation of trenches between silicon islands is actively used in the lithographic process to create arc shape structures by spin coating resists into the trenches. The resulting resist form is used as a template for the metal lines, which are structured on top. Because this arc shape is beneficial for the flexibility of these bridges. The trench depth as a key parameter for the stress distribution is investigated by applying numerical simulations. The simulated results show that the increase in penetration depth of the metal bridge into the trench increases the tensile load which is converted into a shear force Q(x), that usually leads to increased strains the structure can generate. For the fabrication, the filling of the trenches with resists is optimized by varying the spin speed. Compared to theoretical resistance, the current–voltage measurements of the metal bridges show a similar behavior and almost every structural variation is capable of functioning as a flexible electrical interconnect in a complete island-bridge array. Full article

Non-conjugated polymer-derived functional nanocomposites are one of the important ways to develop multifunctional hybrids. By increasing the degree of crosslinking, their photophysical properties can be improved. PbS is a class of narrow bandgap infrared active materials. To avoid aggregation and passivation of the surface defects of PbS nanomaterials, a large number of organic and inorganic ligands are usually used. In this study, PbS/C composite nanosheets were synthesized with Pb²⁺ ion-crosslinked sodium alginate gel by one-pot carbonization. The resulting nanosheets were coated on untreated A4 printing paper, and the electrodes were the graphite electrodes with 5B pencil drawings. The photocurrent signals of the products were measured using typical 650, 808, 980, and 1064 nm light sources. The results showed that the photocurrent switching signals were effectively extracted in the visible and near-infrared regions, which was attributed to the mutual passivation of defects during the in situ preparation of PbS and carbon nanomaterials. At the same time, the resulting nanocomposite exhibited electrical switching responses to the applied strain to a certain extent. The photophysical and defect passivation mechanisms were discussed based on the aggregation state of the carbon hybrid and the interfacial electron interaction. This material would have potential applications in broadband flexible photodetectors, tentacle sensors, or light harvesting interdisciplinary areas. This study provided a facile approach to prepare a low-cost hybrid with external stimulus response and multifunctionality. These results show that the interfacial charge transfer is the direct experimental evidence of interfacial interaction, and the regulation of interfacial interaction can improve the physical and chemical properties of nanocomposites, which can meet the interdisciplinary application. The interdisciplinary and application of more non-conjugated polymer systems in some frontier areas will be expanded upon. Full article

All artificial materials used for implantation into an organism cause a foreign body reaction. This is an obstacle for a number of medical technologies. In this work, we investigated the effect of high-energy ion bombardment on polyurethane for medical purposes and the reaction of body tissues to its insertion into the mouse organism. An analysis of the cellular response and shell thickness near the implant showed a decrease in the foreign body reaction for implants treated with high-energy ions compared to untreated implants. The decrease in the reaction is associated with the activation of the polyurethane surface due to the formation on the surface layer of condensed aromatic clusters with unbonded valences on the carbon atoms at the edges of such clusters and the covalent attachment of the organism’s own proteins to the activated surface of the implant. Thus, immune cells do not identify the implant surface coated with its own proteins as a foreign body. The deactivation of free valences at the edges of aromatic structures due to the storage of the treated implant before surgery reduces surface activity and partially restores the foreign body response. For the greatest effect in eliminating a foreign body reaction, it is recommended to perform the operation immediately after treating the implant with high-energy ions, with minimal contact of the treated surface with any materials. Full article

Although pure alkali-activated materials (AAMs) only depend on high alkalinity to resist biological pollution, the effects of which are inadequate, it is essential to add cuprous oxide to reinforce the antifouling effect. In this paper, triethoxycaprylylsilane (TTOS) was used as a superhydrophobic modifier that was copolymerized with the exposed hydroxyl groups on the alkali-based geopolymers coating and then generated micro/nanostructures. Therefore, superhydrophobic geopolymer coating can achieve long-lasting controlled release of Cu²⁺ by controlling the inflow and outflow of water to achieve the aim of extending the antibiofouling life of coating when cuprous oxide is added to alkali-based geopolymer. Full article

This study describes the comparison between the interaction of a series of peptide-functionalized chitosan-based nanocapsules and liposomes with two cell lines, i.e., mouse macrophages RAW 264.7 and human endothelial cells EA.hy926. Both types of nanocarriers are loaded with magnetic nanoparticles and designed for anti-inflammatory therapy. The choice of these magnetic nanostructures is argued based on their advantages in terms of size, morphology, chemical composition, and the multiple possibilities of modifying their surface. Moreover, active targeting might be ensured by using an external magnetic field. To explore the impact of chitosan-based nanocapsules and liposomes on cell cytophysiology, the cell viability, using the MTT assay, and cell morphology were investigated. The results revealed low to moderate cytotoxicity of free nanocapsules and significant cytotoxicity induced by chitosan-coated liposomes loaded with dexamethasone, confirming its release from the delivery system. Thus, after 48 h of treatment with nanocapsules, the viability of RAW 264.7 cells varied between 88.18% (OCNPM-1I, 3.125 µg/mL) and 76.37% (OCNPM-1, 25 µg/mL). In the same conditions, EA.hy926 cell viability was between 99.91% (OCNPM-3, 3.125 µg/mL) and 75.15% (OCNPM-3, 25 µg/mL) at the highest dose (25 µg/mL), the values being comparable for both cell lines. Referring to the cell reactivity after dexamethasone-loaded liposome application, the lowest viability of RAW 264.7 cells was 41.25% (CLDM5CP-1, 25 µg/mL) and 58.20% (CLDMM2CP-1 1.25 µg/mL) in the endothelial cell line, proving a selective character of action of nanocarriers. The cell morphology test, performed to support and confirm the results obtained by the MTT test, revealed a differentiated response for the two types of nano-carriers. As expected, an intense cytotoxic effect in the case of dexamethasone-loaded liposomes and a lack of cytotoxicity for drug-free nanocapsules were noticed. Therefore, our study demonstrated the biocompatible feature of the studied nanocarriers, which highlights them for future research as potential drug delivery systems for pharmacological applications, including anti-inflammatory therapy. Full article

The effect of wheat gluten (WG)/phenolic extracts (PE) coating on the storage qualities of salmon fillets was studied. Porphyra haitanensis, belonging to red algae, possesses abundant phenolic compounds. Films were prepared by incorporating phenolic extracts (0, 0.5%, 0.75%, and 1.0%, w/v) from Porphyra haitanensis to WG. The PE showed strong antioxidant activities by scavenging DPPH and ABTS radicals. The increased addition of PE to WG film significantly increased tensile strength compared to that of WG film, but reduced water vapor permeability. The quality of salmon fillet stored at 4 °C from 0 to 9 days was decreased due to the oxidation of lipid and protein. However, the increased addition of PE to WG significantly reduced pH, TVB-N, TBA, peroxide value, total sulfhydryl content, and carbonyl content of salmon fillet compared to control salmon fillet. In addition, the increased addition of PE to WG also significantly improved water holding capacity, hardness, chewiness, and springiness of salmon fillet during storage compared to those of control salmon fillet. Taken together, this study showed phenolic extracts from Porphyra haitanensis improved wheat gluten-based film properties and further enhanced the qualities of coated salmon fillet during storage. Full article