Search Results (1,960)

Table olives are high in salt, which can negatively impact cardiovascular health. It is essential to reduce their salt content to mitigate such risk. The objectives of the study were to develop an appropriate protocol to determine mineral bioaccessibility in green Spanish-style Manzanilla table olives and to use it to evaluate, for the first time, the effects of replacing 50% NaCl in the packaging brine with KCl, CaCl₂, and MgCl₂ on this characteristic. After testing, Miller’s protocol with a post-digestion re-extraction was chosen. The mineral bioaccessibility found was as follows: Na, 93–98%; K, 94–100%; Ca, 19–27% (the lowest accessibility); Mg, 78–91% (moderately accessible); and non-added P, 55–67%. Bioaccessible amounts (mg/100 g pulp) of added minerals in runs were 151–503 for K, 53–109 for Ca, and 54–143 for Mg. The bioaccessible mineral vs. salt concentrations were modelled and plotted using RSM, illustrating the possible predictions from the tested range of combinations. The bioaccessibility of Ca and Mg was approximately 70% and 15% lower than the values indicated on the label based on the chemical analysis. The results discourage Ca fortification in packaging and suggest including bioaccessibility, markedly influenced by the food matrix, on the label for accurate nutritional information. Full article

This work investigates the essential constituents, production methods, and properties of polycaprolactone (PCL) and Baghdadite fibrous scaffolds. In this research, electrospinning was used to produce fiber ropes. In this study, the Baghdadite powder was synthesized using the sol–gel method and incorporated into PCL’s polymeric matrix in formic acid and acetic acid solvents. The present work examined PCL–Baghdadite fibrous scaffolds at 1%, 3%, and 5 wt% for morphology, fiber diameter size, hydrophilicity, porosity, mechanical properties, degradability, and bioactivity. The introduction of Baghdadite nanopowder into pure PCL scaffolds reduced fiber diameter. The wetting angle decreased when Baghdadite nanopowder was added to fibrous scaffolds. Pure PCL reduced the wetting angle from 93.20° to 70.53°. Fibrous PCL scaffolds with Baghdadite nanopowder have better mechanical characteristics. The tensile strength of pure PCL fibers was determined at 2.08 ± 0.2 MPa, which was enhanced by up to 3 wt% by adding Baghdadite nanopowder. Fiber elasticity increased with tensile strength. Baghdadite at a 5% weight percentage reduced failure strain percentage. Fibers with more Baghdadite nanopowder biodegrade faster. Adding Baghdadite ceramic nanoparticles resulted in increased bioactivity and caused scaffolds to generate hydroxyapatite. The results show that Baghdadite PCL-3 wt% fibers have promising shape, diameter, and mechanical qualities. After 24 h, L-929 fibroblast cell viability was greater in the scaffold with 3% Baghdadite weight compared to the pure PCL. PCL-3 wt% Baghdadite fibers generated hydroxyapatite on the surface and degraded well. Based on the above findings, PCL fibers having 3 wt% of Baghdadite are the best sample for tissue engineering applications that heal flaws. Full article

Quasipaa spinosa, commonly known as the spiny frog, is an economically valued amphibian in China prized for its tender meat and nutritional value. This species exhibits marked sexual dimorphism, most notably the prominent spiny structures on males that are pivotal for mating success and species identification. The spines of Q. spinosa exhibit strong seasonal variation, changing significantly with the reproductive cycle, which typically spans from April to October. Sexually mature males develop densely packed, irregularly arranged round papillae with black spines on their chests during the breeding season, which may then reduce or disappear afterward, while females have smooth chest skin. Despite their ecological importance, the developmental mechanisms and biological functions of these spines have been inadequately explored. This study integrates morphological, transcriptomic, and metabolomic analyses to elucidate the mechanisms underlying the seasonal variation in spine characteristics of Q. spinosa. Our results demonstrate that spine density inversely correlates with body size and that spine development is accompanied by significant changes in epidermal thickness and keratinization during the breeding season. Comparative transcriptomic analysis across different breeding stages revealed significant gene expression alterations in pathways related to extracellular matrix interactions, tyrosine metabolism, Wnt signaling, and melanogenesis. Metabolomic analysis further identified significant seasonal shifts in metabolites essential for energy metabolism and melanin synthesis, including notable increases in citric acid and β-alanine. These molecular changes are consistent with the observed morphological adaptations, suggesting a complex regulatory mechanism supporting spine development and functionality. This study provides novel insights into the molecular basis of spine morphogenesis and its seasonal dynamics in Q. spinosa, contributing valuable information for the species’ conservation and aquaculture. Full article

Vanadis 8 steel is a tool steel manufactured by powder metallurgic processing. Its main alloy elements are V, Cr and Mo. By implementing an experimental design with five factors—all of them are related to the thermal processing of this steel and with ionic nitriding—the effects of said factors on adhesive wear resistance and corrosion resistance were studied. For this purpose, Pin-on-Disc wear tests and lineal polarization resistance tests were carried out using an aqueous solution with 3.5% NaCl by weight. The main aim was to increase this steel use in more aggressive environmental conditions, such as in coastal environments. By means of XRD, the percentage of retained austenite was determined, and by SEM-EDX, the microstructure was revealed. The conclusion is that adhesive wear resistance is improved if thermal processing parameters are at such levels that increase austenite destabilization and reduce retained austenite content. This means to destabilize austenite at 1180 °C during 1 h, with oil quenching, tempering at 520 °C during 2 h and ionic nitriding at 520 °C during 2 h. Corrosion resistance is highly improved with ionic nitriding. At the same time, to compensate for the negative effect on corrosion resistance of a high density of primary and secondary carbides, it is essential to carry out the ionic nitriding treatment. The harmful effect of electrochemical microcells that appear in the carbide/matrix interface is compensated by the passivating effect generated by the nitrided surface. Full article

Given the increase in current density in the constituent materials of electrical systems, improving the electrical conductivity of these materials, particularly copper (Cu), is crucial. This would also help to mitigate the heat generated by Joule heating. The incorporation of graphene (Gr) into a composite material (Cu/Gr) is a viable solution. However, to ensure the proper transfer of properties between the reinforcement and the matrix, several elements must be considered, including the orientation of the reinforcement. As a 2D material, controlling graphene’s orientation within the structure is essential but often overlooked. To address this issue, hot rolling was implemented to improve the alignment of the reinforcement. The inclusion of graphene led to a 12 HV increase in the material’s hardness, demonstrating a positive composite effect. Simultaneously, rolling increased the material’s hardness from 67.6 to 75.1 HV by introducing more dislocations into the material. To characterize the graphene’s alignment, polarized Raman spectroscopy was used. This technique highlighted the improved alignment of the reinforcement in the rolling direction, a change that was visible and confirmed by scanning electron microscopy micrographs. Full article

Among the various compounds regarded as emerging contaminants (ECs), pharmaceuticals and personal care products (PPCPs) are of particular concern. Their continuous release into the environment has a negative global impact on human life. This review summarizes the sources, occurrence, persistence, consequences of exposure, and toxicity of PPCPs, and evaluates the various analytical methods used in the identification and quantification of PPCPs in a variety of solid and liquid environmental matrices. The current techniques of choice for the analysis of PPCPs are state-of-the-art liquid chromatography coupled to mass spectrometry (LC-MS) or tandem mass spectrometry (LC-MS²). However, the complexity of the environmental matrices and the trace levels of micropollutants necessitate the use of advanced sample treatments before these instrumental analyses. Solid-phase extraction (SPE) with different sorbents is now the predominant method used for the extraction of PPCPs from environmental samples. This review also addresses the ongoing analytical method challenges, including sample clean-up and matrix effects, focusing on the occurrence, sample preparation, and analytical methods presently available for the determination of environmental residues of PPCPs. Continuous development of innovative analytical methods is essential for overcoming existing limitations and ensuring the consistency and diversity of analytical methods used in investigations of environmental multi-class compounds. Full article

Polymer-based dressings deriving from natural biomaterials have advantages such as nontoxicity, biocompatibility, and mechanical stability, which are essential for efficient wound healing and microbial infection diagnostics. Here, we designed a prototype of an intelligent hydrogel dressing on the base of bacterial cellulose (BC) for monitoring wound microbial infection due to the uploaded natural pH dye-sensor, anthocyanins (ANC) of elderberry fruit (Sambucus nigra L.). The highest sensor responses to bacterial metabolites for ANC immobilized to BC were observed at pH 5.0 and 6.0. The detection limit of the sensor signals was 3.45 A.U., as it was evaluated with a smartphone-installed application. The FTIR spectral analysis of the hybrid BC/ANC hydrogel films has proved the presence of anthocyanins within the BC matrix. Hybrid films differed from the control ones by thicker microfibrils and larger pores, as detected with scanning electron microscopy. Halochromic BC/ANC films exhibited antimicrobial activities mainly against gram-positive bacteria and yeast. They showed no cytotoxicity for the in vitro human cell lines and mouse fibroblasts within a selected range of anthocyanin concentrations released from the BC/ANC film/dressing prototype. Compared to the control, the in vitro healing test showed overgrowth of primary mouse fibroblasts after applying 0.024–2.4 µg/mL ANC. Full article

MXene, a promising two-dimensional nanomaterial, exhibits significant potential across various applications due to its multilayered structure, metal-like conductivity, solution processability, and surface functionalization capabilities. These remarkable properties facilitate the integration of MXenes and MXene-based materials into high-performance polymer composites. Regarding this, a comprehensive and well-structured up-to-date review is essential to provide an in-depth understanding of MXene/thermoplastic polyurethane nanocomposites. This review discusses various synthetic and modification methods of MXenes, current research progress and future potential on MXene/thermoplastic polyurethane nanocomposites, existing knowledge gaps, and further development. The main focus is on discussing strategies for modifying MXene-based compounds and their flame-retardant efficiency, with particular emphasis on understanding their mechanisms within the TPU matrix. Ultimately, this review addresses current challenges and suggests future directions for the practical utilization of these materials. Full article

Bacterial cellulose (BC) is a biodegradable polymer resembling paper after being dried. It finds a growing number of applications in many branches of industry and in medicine. In the present study, BC was produced after Gluconacetobacter hansenii ATCC 23769 strain culture and used as a matrix for plant extracts (tulsi, brahmi, lemon, blackberry, nettle root, and nettle leave) and essential oils (cinnamon, sage, clove, mint, thyme, lemongrass, rosemary, lemon, anise, tea tree, lime, grapefruit, and tangerine), and the antimicrobial properties of these biomaterials was determined. The growth-inhibiting effects of plant extracts and essential oils combined with BC were analyzed against five Cronobacter species isolated from food matrix and two reference strains from the ATCC (513229 and 29544). Additional analyses were conducted for BC water activity and for its capability to absorb biologically active plant compounds. The cellulose matrix with a 50% extract from brahmi was found to effectively inhibit the growth of the selected Cronobacter strains. The other plant water extracts did not show any antimicrobial activity against the tested strains. It was demonstrated that BC soaked with thyme essential oil was characterized with the strongest antimicrobial activity in comparison to the other tested EOs. These study results indicate the feasibility of deploying BC impregnated with natural plant components as an active and environmentally-friendly packaging material. Full article

Philadelphia-Negative Myeloproliferative neoplasms (MPNs) are a diverse group of blood cancers leading to excessive production of mature blood cells. These chronic diseases, including polycythemia vera (PV), essential thrombocythemia (ET), and primary myelofibrosis (PMF), can significantly impact patient quality of life and are still incurable in the vast majority of the cases. This review examines the mechanobiology within a bone marrow niche, emphasizing the role of mechanical cues and the primary cilium in the pathophysiology of MPNs. It discusses the influence of extracellular matrix components, cell-cell and cell-matrix interactions, and mechanosensitive structures on hematopoietic stem cell (HSC) behavior and disease progression. Additionally, the potential implications of the primary cilium as a chemo- and mechanosensory organelle in bone marrow cells are explored, highlighting its involvement in signaling pathways crucial for hematopoietic regulation. This review proposes future research directions to better understand the dysregulated bone marrow niche in MPNs and to identify novel therapeutic targets. Full article

Hepatic fibrosis, arising from prolonged liver injury, entails the activation of hepatic stellate cells (HSCs) into myofibroblast-like cells expressing alpha-smooth muscle actin (α-SMA), thereby driving extracellular matrix deposition and fibrosis progression. Strategies targeting activated HSC reversal and hepatocyte regeneration show promise for fibrosis management. Previous studies suggest that extracellular vesicles (EVs) from mesenchymal stromal cells (MSCs) can suppress HSC activation, but ensuring EV purity is essential for clinical use. This study investigated the effects of MSC-derived EVs cultured in chemically defined conditions on liver spheroids and activated HSCs. Umbilical cord- and bone marrow-derived MSCs were expanded in chemically defined media, and EVs were isolated using filtration and differential ultracentrifugation. The impact of MSC-EVs was evaluated on liver spheroids generated in Sphericalplate 5D™ and on human HSCs, both activated by transforming growth factor beta 1 (TGF-β1). MSC-EVs effectively reduced the expression of profibrotic markers in liver spheroids and activated HSCs induced by TGF-β1 stimulation. These results highlight the potential of MSC-EVs collected under chemically defined conditions to mitigate the activated phenotype of HSCs and liver spheroids, suggesting MSC-EVs as a promising treatment for hepatic fibrosis. Full article

Keloid scars, characterized by abnormal fibroproliferation and excessive extracellular matrix (ECM) production that extends beyond the original wound, often cause pruritus, pain, and hyperpigmentation, significantly impacting the quality of life. Keloid pathogenesis is multifactorial, involving genetic predisposition, immune response dysregulation, and aberrant wound-healing processes. Central molecular pathways such as TGF-β/Smad and JAK/STAT are important in keloid formation by sustaining fibroblast activation and ECM deposition. Conventional treatments, including surgical excision, radiation, laser therapies, and intralesional injections, yield variable success but are limited by high recurrence rates and potential adverse effects. Emerging therapies targeting specific immune pathways, small molecule inhibitors, RNA interference, and mesenchymal stem cells show promise in disrupting the underlying mechanisms of keloid pathogenesis, potentially offering more effective and lasting treatment outcomes. Despite advancements, further research is essential to fully elucidate the precise mechanisms of keloid formation and to develop targeted therapies. Ongoing clinical trials and research efforts are vital for translating these scientific insights into practical treatments that can markedly enhance the quality of life for individuals affected by keloid scars. Full article

A protocol for the monazite (LREE,Y,Th,U,Si,Ca)PO₄ in situ Th-U-Pb dating by electron probe microanalyser (EPMA) involves a suitable reference monazite. Ages of several potential reference monazites were determined by TIMS-U-Pb isotope analysis. The EPMA protocol is based on calibration with REE-orthophosphates and a homogeneous Th-rich reference monazite at beam conditions of 20 kV, 50 nA, and 5 µm for best possible matrix matches and avoidance of dead time bias. EPMA measurement of samples and repeated analysis of the reference monazite are performed at beam conditions of 20 kV, 100 nA, and 5 µm. Analysis of Pb and U on a PETL crystal requires YLg-on-PbMa and ThMz-on-UMb interference corrections. Offline re-calibration of the Th calibration on the Th-rich reference monazite, to match its nominal age, is an essential part of the protocol. EPMA-Th-U-Pb data are checked in ThO₂*-PbO coordinates for matching isochrones along regressions forced through zero. Error calculations of monazite age populations are performed by weighted average routines. Depending on the number of analyses and spread in ThO₂*-PbO coordinates, minimum errors <10 Ma are possible and realistic for Paleozoic monazite ages. A test of the protocol was performed on two garnet metapelite samples from the Paleozoic metamorphic Zone of Erbendorf-Vohenstrauß (NE-Bavaria, western Bohemian Massif). Full article

This study evaluated cryogels from albumin (ALB) and albumin–pectin (ALB:PEC) as carriers for pink pepper (Schinus terebinthifolius Raddi) essential oil. Cryogels were evaluated through infrared spectrophotometry, X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, and differential scanning calorimetry. The bioactivity of the cryogels was analyzed by measuring their encapsulation efficiency (EE%), the antimicrobial activity of the encapsulated oil against S. aureus, E. coli, and B. cereus using the agar diffusion method; total phenolic content and antioxidant activity were analyzed by UV-vis spectrophotometry. The EE% varied between 59.61% and 77.41%. The cryogel with only ALB had the highest total phenolic content with 2.802 mg GAE/g, while the cryogel with the 30:70 ratio (ALB:PEC) presented a value of 0.822 mg GAE/g. A higher proportion of PEC resulted in a more significant inhibitory activity against S. aureus, reaching an inhibition zone of 18.67 mm. The cryogels with ALB and 70:30 ratio (ALB:PEC) presented fusion endotherms at 137.16 °C and 134.15 °C, respectively, and semicrystalline structures. The interaction between ALB and PEC increased with their concentration, as evidenced by the decreased intensity of the O-H stretching peak, leading to lower encapsulation efficiency. The cryogels obtained can be considered a suitable matrix for encapsulating pink pepper oil. Full article

Soft tissue sarcomas (STSs) represent a diverse group of tumors arising from mesenchymal cells, affecting both humans and animals, including dogs. Although STSs represent a class of rare tumors, especially in humans, they pose significant clinical challenges due to their potential for local recurrence and distant metastasis. Dogs, as a model for human STSs, offer several advantages, including exposure to similar environmental risk factors, genetic diversity among breeds, and the spontaneous development of tumors. Furthermore, canine tumors closely mimic the heterogeneity and complexity of human tumors, making them valuable for research into disease progression and treatment effectiveness. Current treatment approaches for STSs in both dogs and humans primarily involve surgery, radiation therapy, and chemotherapy, with treatment decisions based on tumor characteristics and patient factors. However, the development of novel therapeutic strategies is essential, given the high failure rate of new drugs in clinical trials. To better design new tailored treatments, comprehension of the tumor microenvironment (TME) is fundamental, since it plays a crucial role in STS initiation and progression by modulating tumor behavior, promoting angiogenesis, and suppressing immune responses. Notably, TME features include cancer-associated fibroblasts (CAFs), extracellular matrix (ECM) alterations, and tumor-associated macrophages (TAMs) that, depending on their polarization state, can affect immune responses and thus the patient’s prognosis. In this review, new therapeutical approaches based on immunotherapy will be deeply explored as potential treatment options for both dogs and humans with STSs. In conclusion, this review provides an overview of the current understanding of STSs in dogs and humans, emphasizing the importance of the TME and potential treatment strategies. Full article