Search Results (3,115)

The appeal of a car’s exterior often captures a customer’s initial attention, but the interior ultimately seals the deal, creating a lasting connection between the customer and car. The interior quality plays a significant role in shaping the overall impression of a vehicle. Interior surfaces with tactile and visual qualities contribute to customer experience. Traditionally, automotive manufacturers have relied on natural grains, leather, and occasional geometric patterns to enhance the aesthetic appeal and tactile experiences of interiors. This study presents a novel approach to texture pattern design for automotive interiors. This method uses city maps from diverse locations as sources to create unique textural patterns. The process begins by capturing high-resolution images of city maps, selecting segments based on tessellation potential, applying abstraction and correction, cleaning the image to eliminate unwanted elements, and generating a 2D black-and-white pattern that simulates the texture when applied to the CAD surfaces of the interior components. This approach offers a unique alternative to the conventional practice of selecting texture patterns from the existing sources. This enables automotive designers to create signature texture patterns that differentiate between brands in a competitive market. Full article

The aim of the present in vitro study was to evaluate specific mechanical and physicochemical properties of three calcium silicate-based sealers, BioRoot™ Flow (BRF), CeraSeal (CRS) and TotalFill^® (TF). Samples were prepared to evaluate different physicochemical and mechanical properties of the tested sealers. These evaluations were accomplished by investigating the pH changes over time, porosity, roughness, flow properties, compressive strength and wettability. The results were statistically evaluated using one-way analysis of variance. All three sealers demonstrated an alkaline pH from 1 h of immersion in water to 168 h. A higher porosity and hydrophily were detected in BRF samples compared to CRS and TF. No significant difference was found between the tested materials in the flow properties. Lower compressive strength values were observed for BRF compared to TF and CRS. Differently shaped structures were detected on the three materials after 7 days of immersion in PBS. The three materials demonstrated a higher solubility than 3% after 24 h of immersion in water (CRS < BRF < TF). The novel premixed calcium silicate sealer (BRF) had comparable physicochemical properties to the existing sealers. The lower compressive strength values could facilitate the removal of these materials during retreatment procedures. Further studies should investigate the biological effects of the novel sealer. Full article

Saline formations deep underground are among the most promising targets for large-scale geologic carbon storage. The caprock seal integrity evaluation is an important component of commercial-scale CO₂ sequestration projects. Measurements of the porosity and permeability of mudstone samples from the NETL-supported Cranfield Project were performed using a helium porosimeter and a core flow apparatus, before and after exposure in a CO₂-saturated brine environment. The permeability of the core samples rapidly decreased with the increase in confining pressure and did not fully recover after decompression. On the other hand, exposure to CO₂ led to an increase in the permeability by at least an order of magnitude. The porosity changes after the exposure were not substantial. The post-exposure increase in permeability was subsequently offset by its rapid decrease during the higher-pressure confinement. Extrapolation of the observed permeability trends to in situ reservoir conditions suggests that Tuscaloosa mudstone can effectively serve as a natural seal. Full article

The aim of this study was to solve the problems associated with the sealing and tearing failure of rubber packer cylinders during CO₂ downhole injection. Using Comsol Multiphysics 6.0 software, a rubber cylinder model in a supercritical CO₂ (SC–CO₂) environment was established. The thermal analogy method was used to simulate the CO₂ diffusion and rubber cylinder swelling process. We analyzed the deformation and stress of the rubber cylinder that was caused by temperature and pressure, with CO₂ as the swelling agent. The results show that in the SC–CO₂ environment, under the influence of CO₂ diffusion and the consequent swelling, the rubber cylinder body is prone to large deformations, and the maximum shear stress is significantly increased, leading to the shear failure of the rubber cylinder. Reducing the initial seating pressure can alleviate the impact of deformation, whereas reducing the maximum contact pressure can cause the rubber cylinder to lose its seal. We also analyzed the influence of various factors on the maximum contact stress of the rubber cylinder, providing a theoretical basis and technical support for improving the sealing performance of rubber packer cylinders in an SC–CO₂ environment. Full article

The objective of this work was to assess the efficacy of different proteolytic agents on the bond strength of pit and fissure sealants to bovine enamel. Eighty-four bovine enamel specimens were randomly assigned in groups according to the pit and fissure sealant applied (HelioSeal F or Dyad Flow). Then, the specimens were subdivided according to the proteolytic agent used (n = 7): Group 1, distilled water (control); Group 2, 10 wt.% Tergazyme^®; Group 3, 10 wt.% ZYME^®; Group 4, 10% papain gel; Group 5, 10% bromelain gel; and Group 6, 5.25 wt.% sodium hypochlorite. The cell viability of the proteolytic solutions was assessed through the MTT assay. The proteolytic agents were applied on the enamel surface prior to the acid-etching procedure; then, the pit and fissure sealants were placed. The micro-shear bond strength was evaluated after 24 h or 6 months of water storing at 37 °C. Representative SEM images were taken for each experimental group. The bond strength data were statistically analyzed by a three-way ANOVA test using a significance level of α = 0.05. Bromelain and papain proteolytic solutions did not exert any cytotoxic effect on the human dental pulp cells. After 24 h and 6 months of aging, for both pit and fissure sealants, sodium hypochlorite, papain, bromelain, and Tergazyme^® achieved statistically significant higher bond strength values (p < 0.05). Irrespective of the deproteinizing agent used, Dyad Flow resulted in a better bond strength after 6 months of aging. The type 1 etching pattern was identified for sodium hypochlorite, papain, and bromelain. Tergazyme^®, papain, and bromelain demonstrated efficacy in deproteinizing enamel surfaces prior to acid etching, leading to the improved bond strength of pit and fissure sealants. Clinically, this suggests that these proteolytic agents can be considered viable alternatives to traditional methods for enhancing sealant retention and longevity. Utilizing these agents in dental practice could potentially reduce sealant failures. Full article

To uncover the reservoir characteristics and enrichment law of coal-measure gas in Julu sag, Hebei Province, and achieve co-exploration and co-mining, it is necessary to conduct a comprehensive analysis. In this study, we investigated the characteristics of coal-measure gas accumulation in the Taiyuan Formation and Shanxi Formation in the Julu area. This was achieved by collecting data on coal-measure source rocks and organic geochemistry, which were then combined with regional geological conditions. This study indicates that the coal seams and shales of Shanxi Formation and Taiyuan Formation in the study area serve as the primary source rocks. The predominant macerals found in coal rock are vitrinite. Furthermore, the organic matter type present in shale is primarily categorized as type II₂, with the organic matter maturity falling within the immature–mature stage. Based on the simulation results of tectonic-burial history, thermal evolution history, and hydrocarbon generation history in the study area, it is evident that the coal-measure source rocks experienced their first peak of hydrocarbon generation during the Mesozoic era as a result of deep metamorphism. Subsequently, the area experienced uplift and erosion, leading to the release of coal-bearing natural gas. Since the Paleogene period, the coal-bearing source rocks have undergone sedimentary burial and entered the secondary hydrocarbon generation stage, resulting in significant production of oil and gas. Based on the analysis of gas content, buried depth, source rock thickness, and sealing conditions in the study area, it is evident that the potential of coal-measure gas resources in the study area is primarily comprised of shale gas with supplementary coalbed methane. It can be inferred that the deeper areas within the study area hold greater exploration prospects. Full article

On the basis of “Carbon Peak and Carbon Neutral” goals, carbon sequestration projects are increasing in China. The integrity of cement sheaths, as an important factor affecting carbon sequestration projects, has also received more attention and research. When CO₂ is injected into the subsurface from sequestration wells, the cement sheath may mechanically fail due to the pressure accumulated inside the casing, which leads to the sealing of the cement sheath failing. The elasticity and strength parameters of the cement sheath are considered in this paper. The critical bottom-hole injection pressures of inclined well sections under anisotropic formation stresses at different depths were calculated for actual carbon-sealing wells in the X block—the CO₂ sequestration target block. The sensitivity factors of the critical bottom-hole injection pressure were also analyzed. It was found that the cement sheath damage criterion was tensile damage. The Young’s modulus and tensile strength of the cement sheath are the main factors affecting the mechanical failure of the cement sheath, with Poisson’s ratio having the second highest influence. An increase in the Young’s modulus, Poisson’s ratio, and tensile strength of the cement sheath can help to improve the mechanical stability of cement sheaths in CO₂ sequestration wells. This model can be used for the design and evaluation of cement in carbon sequestration wells. Full article

Asphalt concrete impervious facings, widely adopted as the impervious structures for rockfill dams and upper reservoirs in pumped storage power stations, typically have a multilayer structure with a thin sealing layer, a thick impervious layer, and a thick leveling bonding layer. The properties of the interfaces between these layers are crucial for the overall performance of the facings. This paper develops a model to investigate the complex interface damage behavior of the facing under static water pressure and gravity. The model considers two damage origins: one is the interface adhesion–decohesion damage, which is described by the cohesive zone model (CZM) combined with the Weibull-type random interface strength distribution, and the other is the bulk damage of each layer, described by Mazars’ model. Primarily, a comparison between numerical simulation and indoor direct shear tests validates the reliability of the CZM for the asphalt concrete layer interface. Then, the damage distribution of the two interfaces is simulated, and the characteristics of the interface stress are analyzed in detail. The interface shear stresses of the ogee sections, which have different curvatures, all show an interesting oscillation between the thin sealing layer and the impervious layer, and the interface damage at this interface exhibits high heterogeneity. Furthermore, tension stress exists in the local zones of the ogee section, and the damage in this section is significantly greater than in other parts of the facings. Full article

Geothermal energy plays a crucial role in the large-scale deep decarbonisation process and the transition of energy structure in our country. Due to the complex reservoir environment of geothermal energy, characterised by low porosity and permeability, conventional fracturing methods struggle to create a complex network of fractures. Temporary plugging and diverting fracturing technology (TPDF) is a key technology to improve the efficiency of geothermal reservoir extraction. However, there is still a lack of knowledge about the migration and sealing law of temporary plugging agents in complex fractures. Therefore, in this study, two multiphase flow models of temporary plugging particle transport at the fracture slit and inside the complex fracture were established by using a Computational Fluid Dynamics (CFD)-Discrete Element Method (DEM) algorithm. The influence of fracturing fluid concentration, temperature, the concentration of temporary plugging particles, and particle size combinations on migration blocking in fractures was investigated. The simulation results indicate the following: High-viscosity fracturing fluid may cause plugging particles to adhere to each other to form clusters of plugging particles, reducing dispersion during transport and slowing down the velocity of the plugging particles. A particle concentration that is too high does not have a better temporary plugging effect. The use of different combinations of particle sizes is significantly better than using a single particle size, which is a key factor for the success of fracture plugging. The research findings are of great theoretical and practical significance for scaled-up, vibration-controlled fracturing technology in geothermal reservoirs. Full article

Much research and practical experience have shown that the utilization of textures has an enhancing effect on the performance of dynamic seals and the dynamic pressure lubrication of gas bearings. In order to optimize the performance of floating ring seals, this study systematically analyzes the effects of different texture shapes and their parameters. The Reynolds equation of the gas is solved by the successive over-relaxation (SOR) iteration method. The pressure and thickness distributions of the seal gas film are solved to derive the floating force, end leakage, friction, and the ratio of buoyancy to leakage within the seal. The effects of various texture shapes, including square, 2:1 rectangle, triangle, hexagon, and circle, as well as their parameters, such as texture depth, angle, and area share, on the sealing performance are discussed. Results show that the texture can increase the air film buoyancy and reduce friction, but it also increases the leakage by a small amount. Square textures and rectangular textures are relatively effective. The deeper the depth of the texture within a certain range, the better the overall performance of the floating ring seal. As the texture area percentage increases, leakage tends to increase and friction tends to decrease. A fractal roughness model is developed, the effect of surface roughness on sealing performance is briefly discussed, and finally the effect of surface texture with roughness is analyzed. Some texture parameters that can significantly optimize the sealing performance are obtained. Rectangular textures with certain parameters enhance the buoyancy of the air film by 81.2%, which is the most significant enhancement effect. This rectangular texture reduces friction by 25.8% but increases leakage by 79.5%. The triangular textures increase buoyancy by 28.02% and leakage increases by only 10.08% when the rotation speed is 15,000 r/min. The results show that texture with appropriate roughness significantly optimizes the performance of the floating ring seal. Full article

For the first time, this paper explores the role of hydration kinetics on microcrack development in cement mortars using the μ-CT technique with a resolution of 2.2 µm. Three binders were tested: fine-grained ordinary Portland cement (OPC) with Blaine fineness of 391 m²/kg, coarse-grained OPC made from the same clinker with Blaine fineness of 273 m²/kg, and H-cement as a representative of the alkali-activated binder. It was found that most microcracks have a width in the range of 5–10 µm, increasing their occurrence with the progress of sealed hydration. While H-cement and coarse-grained OPC showed a comparable number of microcracks, fine-grained OPC exhibited more than twice the number of microcracks. In this sense, high hydration kinetics induce more microcracks, promoting later coalescence into visible cracks and disintegration of concrete at the end. Therefore, durable concrete with minimum microcracks should be derived from slow hydration kinetics or alkali-activation processes. Full article

The concept of self-healing materials and the development of encapsulated curing agents represent a cutting-edge approach to enhancing the longevity and reducing the maintenance costs of cementitious structures. This systematic literature review aims to shed light on the parameters involved in the autonomous self-healing of cementitious materials, utilizing various encapsulated healing agents such as pellets, granules, and capsules. This review also identifies and selects studies that offer additional insights into the efficacy of the self-healing process in cementitious materials and the influence of these specific encapsulated healing agents on the physical mechanical properties of mortars. This comprehensive approach provides a deep understanding of the interplay between self-healing and the physical–mechanical properties of mortars containing these encapsulated healing agents. The main findings indicate that the cement-to-sand ratio, characteristics of fine aggregates, and encapsulation methods significantly impact crack control, self-healing efficiency, and properties of mortar in both fresh and hardened states. The content of encapsulated healing agents within the cementitious matrix affects both the initial workability or flow and subsequent mechanical properties. While pellets coated with PVA film typically reduce workability in the fresh state and compressive strength, capsules coated with Portland cement and sodium silicate mitigate these effects and improve crack sealing in fresh and hardened states without compromising the self-healing capacity of cracks. The three-point flexural test has emerged as the preferred method for a pre-crack assessment over 28 days, with variations depending on the type of healing agent used. As noted in the literature, water has been identified as the optimal environment for autonomous healing. These findings underscore the potential of encapsulation techniques to enhance self-healing capabilities through the controlled release of agents within the cementitious matrix, thereby advancing the research on and development of intelligent construction materials and increasing the durability of cement-based structures. Full article

The present study aimed to investigate the impact on nutritional and functional properties of dried kiwifruit (Actinidia chinensis cv. Sungold) slices during conservation for 120 days in sealed containers in the dark at 25 °C. For this purpose, kiwifruits slices were dried at two different temperatures, 40 and 55 °C, for 30 and 25 h, respectively. Fresh and dried kiwi slices were analyzed for their pH, activity water, total solid soluble (TSS), color, titratable acidity, total phenols (TPC) and flavonoids content (TFC), organic acids, and radical scavenging activities. Analysis carried out on the dehydrated samples showed a good aptitude of kiwi material towards the drying process. Particularly, it has been observed that the drying treatment at low temperature helped to preserve the nutraceutical properties of the fruits. In fact, samples treated at 40 °C (KLT) showed at day 0 (T0) the highest TPC and TFC with values of 979.42 Gallic Acid Equivalents (GAE)/100 g of dried weight (dw) and 281.84 mg catechin equivalents (CTE)/100 g dw even if compared with fresh kiwi slices sample (FKF). Moreover, KLT also exhibited the highest values of antioxidant activity (1657 mmol Trolox/100 g dw). After 120 days storage, all dried samples showed a high ascorbic acid content (429–339 mg/100 g dw fruits) and only a slight variation of physicochemical parameters. Textural Parameters (hardness, springiness, cohesiveness, gumminess, and chewiness), apart from resilience results, showed significant differences between kiwifruit dried at 55 °C and at 50 °C (KLT and KHT, respectively). Color and aroma intensity were the main sensory descriptors with higher scores. Full article

This paper presents a number of lessons learned while designing a proposed sterilization system for Mars Sample Return. This sterilization system is needed to inactivate any potentially hazardous Mars material on the exterior surface of the vessel containing sealed sample tubes filled with Mars rock cores, regolith and atmosphere. These returned samples would provide information on the geologic history of Mars, the evolution of its climate and the potential for ancient life. Mars Sample Return is categorized at Planetary Protection Category V Restricted Earth Return, so it is required to protect the Earth–Moon system from the biological impact of returning samples from Mars to Earth. This article reviews lessons learned in the development of a particular engineering implementation to support the protection of the Earth–Moon biosphere: the use of in situ ultraviolet LED illumination. The details of the biological efficacy of this approach or the policy-related impacts are outside of the scope of this manuscript. The lessons learned presented here include establishing design requirements for the system, the selection of a light source, optical design options, contamination control and approaches to thermal and power management. Full article

Controlling the extent of water invasion in the reservoir and mitigating its detrimental effects on gas well production and natural gas recovery have long been a challenging task in the efficient development of strongly heterogeneous edge water gas reservoirs. To elucidate the edge water invasion mechanism of strongly heterogeneous carbonate gas reservoirs, this study investigates the pore throat characteristics and fluid mobility from both qualitative and quantitative aspects, leveraging natural core observations, cast thin sections, scanning electron microscopy (SEM), and nuclear magnetic resonance (NMR) tests with centrifuge experiments. A core-scale edge water invasion simulation experiment was conducted under online NMR monitoring to examine the dynamic gas production characteristics of the three types of reservoirs during the water invasion process and to elucidate the formation mechanism and distribution pattern of water-sealed gas. Research findings indicate that carbonate reservoirs typically exhibit a diverse range of pore types, including various types of fractures and cavities. Fractures significantly enhance reservoir connectivity, thereby increasing fluid mobility, but also lead to strong non-uniform water invasion. In contrast, cavities substantially improve the storage capacity of the reservoir and can retard the advancement of the water invasion front, thereby alleviating the adverse effects of water invasion. The ultimate recovery rates of fracture-type, cavity-type, and fracture-cavity cores in the water invasion simulation experiment were 29.81%, 64.87%, and 53.03%, respectively. Premature water breakthroughs in the reservoir can result in a large number of gases in matrix pores and even cavities being sealed by formation water, rendering them unrecoverable, which seriously impacts the gas recovery rate of the reservoir. Full article